Remove 'master slide' from individual slide?

Is there a way to remove the master slide from an individual slide but keep it present on the remaining ones?
I am using Keynote 6.1
Thanks

Select the slide you want to change then
Inspector > Format > Slide Layout then click in the white box to select another slide master

Similar Messages

  • Can I create iWeb hyperlinks from individual slides in slideshow?

    I have made a slideshow in iPhoto and dragged it onto my iWeb homepage.   I now want to make links between each individual slide and one of my pages.  Is this possible.  When I click the link icon in the inspector the slides on the slideshow will not highlight to allow links to be made.  Is there another way to do this?Thanks.

    I don't know about the iWeb slideshow as I don't use it but there are lots of choices for a banner/slideshow that will do what you want...
    http://www.iwebformusicians.com/Banner-Slideshow/Action-Banner.html
    http://www.iwebformusicians.com/Banner-Slideshow/Conveyor-Belt.html
    The JQuery Anything slider will do a lot more than most. You can add text, links and movies as slides...
    http://www.iwebformusicians.com/Banner-Slideshow/Anything-JQuery-Slider.html
    I haven't seen anybody do that with the iWeb slideshow - yet!
    Wow, Nivo and Galleria, shown on subsequent pages, can all be adapted to use hyperlinks.
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Remove a photo from a slide show

    Very new to Macs.  Playing with slide show and added a pic I don't want.  How do I delete it from the slide show?

    Select the picture's thumbnail and press the delete key.

  • Get error message and it removes Master Page from Topic

    I get the following message sometimes when I edit a topic but definitely don't get near the header or footer.  Then as soon as I save the topic, I lose my Master Page connection to it.  And I have to go into Properties for that topic and pick the master page again!!  This started one day after using RoboHelp HTML for a month.  Does anyone else have this problem?

    Hello again
    Hmmm, wasn't exactly what I'd hoped to see. I can't really tell much from the image. Looks like it's an image of a topic and not the Master Page?
    Here's the deal. The only time you should be seeing the message you first posted is if you have a Master Page with a Header or Footer area defined. You then edit a topic where something causes the Header or Footer to change. The change to the Header or Footer is what triggers the message.
    As you say you aren't changing anything in the Header or Footer area, this suggests whatever is being used in the Header or Footer area is triggering the notification. That's why I'm interested in exactly what you have in the Master Page.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Unable to import the slide from powerpoint 2007

    I am beginner in captivate 3 and I am using student version.
    So please help me with the answer for the following problem
    I cannot import the slide from powerpoint slide version 2007.
    Captivate 3 is not supporting to import the slide from 2007 version
    . Please help
    With thnaks
    Polachan

    Polachan, just open the Power Point presentation in your copy
    of "MS Powerpoint 2007" and use the "Save As" function to save a
    copy in "Powerpoint 1997-2003" format.
    Then, bring
    that copy into Captivate 3, and you should be okay. Okay?

  • Possible to prevent hidden slide from showing on "next" click?

    I am working on my first Captivate 7 project. I have created a sub-set of slides that users will be able to link to from another slide (almost like pop-up boxes). This is optional content, so I don't want to force users to view it. How do I prevent a slide from displaying when the user clicks "Forward"? I figured out how to exclude it from the TOC, but if I actually Hide the page, I can't use the Jump to Slide feature.
    I tried to set up an OnExit action to jump to another slide, but that doesn't seem to work either. I'm sure others must do this all the time? I really appreciate your advice!!

    You need to set up custom variables that track whether or not the slide should be seen.  The default value will be that the slide is NOT seen (ie 0 or False).  The On Slide ENTER event for these 'hidden' slides will execute a Conditional Advanced Action that checks the value of the variable and if it is set to 0 or False then it will jump immediately to the next slide.
    When you deliberately jump to that slide from another slide your jump action needs to be executed by an Advanced Action that first sets the value of the variable to 1 or True before jumping.  This way, when it gets to the slide the On Slide Enter event's action will see that the slide is supposed to be viewed and allow it to play.
    To clean up, you need to ensure that any way the user gets out of that same slide will also execute an action that resets the variable to 0 or False again.

  • Removing text typing sound from a slide

    I can't remove the text typing sound from an individual slide.  why not?  Should I just be able to right click on the "tpying text" segment in the timeline and click delete?  This doesnt' work.  Bug!

    Don't be so quick to assume something is a bug just because you don't know the workflow.
    Typing text objects are a bit of an unusual case in Captivate because they are locked into the slide more deeply than other objects, and hence have to be dealt with somewhat differently.
    Right click on the typing text layer, and select Replace with Text Animation from the context menu.
    Once you've converted the typing text object to a a text animation, THEN you can delete it. You might have designed Captivate to work differently, but then you might not have thought of giving the users the option of converting typing objects to text animation.

  • How to remove the time slider from my project and keep only buttons

    How to remove the time slider from my project and keep only buttons to interact with my project .

    If I understand you correctly, go to the skin editor (Project, Skin Editor in Captivate 4), select the Playback Control tab, uncheck the Progressbar check box.  Leave checked the buttons for play/pause, rewind, forward, back, etc.
    I hope this helps.
    Mister C.

  • I want my SLIDES to be moved on by the learner, not to have a fixed time. How do I remove the time duration from the slide?

    as above

    Interactivity is more than just reading and clicking, but that is not your question. Which version do you use? I will suppose it is the latest one, 8.0.1.242.
    Answer was already in my first reply. Insert an interactive object: shape button, normal button or click box. They can pause the slide, typical pausing time (see Timing Properties panel) is at 1.5secs for shape buttons and other buttons, at the end of its timeline for the click boxes that are invisible to the user.  Interactive objects have a Success and a Failure event, when they click on it the Success event is fired and that event can trigger an action like 'Go to Next Slide'. You'll find those actions in the Properties panel for that object, Actions tab. User can read or look as long as he wants, and only when he clicks that object he will move to the next slide. Read about Timeline: Tiny Timeline Tidbits - Captivate blog
    Since you'll probably want that object to be clicked to move to the next slide on every slide, I recommend to use a shape button. That is the only one that can be put on a master slide (maybe the main master slide), or on the first slide and timed for the rest of the project (Timing Properties panel). More details in this post:
    Why I like Shape Buttons - Captivate 6! - Captivate blog   
    Never extend a slide duration for the purpose you mention, because that is just increasing the file size for no reason.

  • Need to export audio for individual slides from slideshow recording

    I have a Captivate project that was recorded using full motion video whilst navigating through a PowerPoint slideshow. Some of the slides have now been updated, and I need to break up the original recording and extract audio for each individual slide. This will also make incremental updates easier for me going forward.
    Is there any way to do this using Captivate?
    Many thanks in advance for any advice you can provide.
    Ron.

    Hi Ron.
    Do you know that each clip you record during captivate is saved as an individual Wav file?
    If you go do the Audio Menu, and then Audio Management you can see which wav file is attached to which slide.
    Are you using captivate 5?
    If you are, then the next step is to click on the speaker icon for the slides on the left side of the screen, and you can edit the audio track as needed or cut out the parts as needed....
    If this is what your doing I can explain it better, just not sure if this is what your after.
    Ben.

  • Any way to *cut* an element from a slide?

    Is there any way to cut an element on one slide (such as a
    text box, mouse movement) and delete it, or cut it and paste it
    into/onto another slide?
    All I see are options to Copy Background, which when you
    paste into another slide it REPLACES the existing background), or
    to cut/delete entire slides.
    Why would I want to do this?
    Sometimes I want to remove text boxes and highlight boxes
    COMPLETELY from a slide because they appear in published files even
    if their layer visibility is set to hidden. (Probably a bug in CP4)
    Sometimes I want to take a mouse movement and put it on
    another slide.
    I see no way to work with (cut or paste) elements in the time
    line.
    Can anyone help?

    quote:
    Originally posted by:
    Captiv8r
    Welcome to our community, Tom
    Normally the Cut, Copy and Paste options are available when
    working with objects in Captivate. By chance are any of them
    locked? If so, that may explain why the option isn't available to
    you.
    Look in the Timeline and see if there is a Padlock icon
    listed. If so, click it to unlock it.
    Cheers... Rick
    the were not locked, but I have found you cannot Delete a
    single element if it is hidden on the timeline.
    Also, you can not delete multiple elements at the same time,
    and that some elements are tied to others on the timeline and you
    have to delete them in a certain order sometimes.
    I think Flash still has a much better timeline editing
    capabilities.

  • Master Slide issue - drag and drop alt slide over theme slide

    Keynote on my MacPro: Where before on the previous version I could in Master Slides drag and drop an alternative look over a theme slide to change that slide only and no affecting the entire presentation which was most useful, now that seems no longer an option unless there's something I can't find to do that. When viewing Master Slides now you cannot see the presentation you're working on. Previously I would set up several slides with different looks and where needed drop that look over a slide and it would override the theme slide without all slides being affected. Qny thought guys? Barry

    Although I have been answering quite a lot of questions about Drag&Drop functionality (not a widget), you are the first to mention such problems.  Personally I never had problems, only when not respecting the design of the interaction or doing something stupid. If you are the only user to have such experience (at least for what I hear in these forums and on social media), I don't see why an upgrade should be expected? Did you log the problem? Are you sure that the project is not corrupted?
    The jigsaw learning interaction is pretty simple, also limited, don't know what are your problems there?
    Are you sure that all objects used in the D&D (drag sources and drop targets) are visible in output. It is a bit confusing in CP8 because the eye icon is used both for visible in output for objects in Properties panel, and for showing the links in D&D in the D&D panel. Can you see the links? Did you avoid overlapping of objects? Did you not rename an object after creating the D&D interaction, because that will break the link from/to that object? I mentioned this in my last article: Drag&Drop tips - Captivate blog
    I am just trying to find out what is going wrong, bit curious about this rare case.

  • I copied a slide from a self-paced presentation to add to a click-paced presentation but it keeps auto advancing.  How do I get that to stop?

    So, the title says it all, I think.  In the Set-up tab, the "guilty" slides show the same global choice as the others for "Presentation Type" (Normal not Self-playing).  I don't see anything to click for an individual slide to stopit from auto-advancing.  What to do? 

    Gary Scotland -- Thanks for pointing to the Animate menu as relevant!!  For me that had not meant transitions from one slide to the next.  You kicked where I needed to be kicked.   All now works as hoped for.  And, I'm smarter. Thanks.

  • Printing slides from keynote

    How do you print 3,6, or 9 slides to a page from iPad Keynote to use as a handout?

    If you want one full slide per page, print "Individual slides". For a nice layout of multiple slides without notes lines, choose "Individual Slides" and change the Layout/Pages per sheet to 6 (or whatever) per page. Then you don't waste any space on notes lines. It still will show in the preview that you are printing one slide/page but when I tried it, it printed 6 slides/page without being crammed into the corner of the page.

  • In 8.1.2 i have un checked the Ken BUrns effect in some individual slides. Sometimes it turns itself back on. At first I thought I'd made the mistake myself, but it has happend many times.

    in 8.1.2 i have un checked the Ken Burns effect in some individual slides. Sometimes it turns itself back on. At first I thought I'd made the mistake myself, but it has happend many times. Can I avoid this? Is the software flawed?

    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Maybe you are looking for