Remove n91 voice tag

Hi,
I'm trying to stop the voice tag from saying contacts name when some calls since it is very annoying and I can already see why is calling anyway. I have turned off the synthesizer and reset the voice adaptions, however, both methods did not work. Is there any way to fully remove the service?

Hi
You need to change the setting in the profile you are using. Go to profiles, selectthe profole you are using and personalize (edit) it. See the field called "say callers name"..set to off
music

Similar Messages

  • N70 voice tag issue

    I have the version 5.0609.2.0.1 01-03-06 which appears to have one problem: it messes up the voice tags. Every new contact I save does not get a voice tag anymore. Do you know how this can be fixed?
    Cheers,
    Chryssa
    EDIT: removed name of ex-moderator and changed titleMessage Edited by damocles on 22-Sep-2006
    01:20 PM
    N95,N81,N96, N97

    If you feel that this is a major issue then reinstall firmware. But before that hard reset your phone by
    1. Switch off the phone.
    2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.( Just in case of N78 it will be the multimedia key the small silver key on right side & for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up).
    3. While holding these buttons, hold the power button to switch on the phone.
    4. Release the buttons when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
    But keep a backup as you may lose your data. I dont know whether this trick actually works on N70.
    Mark my posts as helpful if anyone finds it! After all you will make us improve.
    Thanks for kudos if you give!

  • E50 voice tags are not cteated

    Hello all
    I've got Nokia E50 and 360 contacts. My contacts name are written in Russian. When I copy the contacts from the memory card the first 100 contacts the voice tags are created only for first 100 numbers.
    I've installed the latest firmaware 07.36.0.0 - the same result. My friend has got the same phone and he reported no problem with voice tags. He has more than 100 contact and everyone has voice tags. We copied MY CONTACTS to HIS PHONE and HIS CONTACTS to my one. His contacts in my phone have voice tags, but my contacts in his phone - no.
    We analized our contacts and found the only difference - my contact's names are stored in russian, but his - in english. I converted all my contacts in english and now all my contacts have voice tags.
    But I want russian names! Why 100 russian contacts have voice tags, but other don't have?
    did anybody see smth like this?

    Thanks Mohjo,
    Your reply is much appreciated.
    I did do several searches but not for SIND or N series phones. didn't know it was called that.
    Anyhow, I understand what it does but still think its rubish
    What was wrong with the old 'record your own voice tag' system?
    OWI!, Nokia!, NO!. If it ant' broke, don't fix it!.
    I now the the task of going through all my contacts to check if the voice tag the phone wants to use is ANYTHING like the one I want to use.
    It's taken the edge of showing off my new phone to me mates and saying look what mine does. And yes I am shallow.
    And its only costing me £20 a month.
    Dave
    EDIT: removed expletive.Message Edited by mohjo on 16-Feb-2007
    09:59 AM

  • N70 voice tags

    can someone please tell me why nokia has dropped self recorded voice tags for phoneing people and opted for a robot that speaks my contacts names in an alien language? i always end up phoneing people that i'm not intending to..... also is there any way of getting rid of it and recording my own or not?
    my phone is the N70 and apart from that it was worth waiting forMessage Edited by bloozman_1 on 30-Mar-2006
    08:54 PM

    31-Mar-200607:50 PM
    mistert wrote:
    Hi kosik
    Firstly, it isn't possible in N70 to record your own voice tags. For each of your contacts a name is synthesised automatically and compared with your voice when you do voice dialling.
    When you use voice dialling, the phone adapts to your voice. This adaptation can be reset (or turned off completely). Go to Voice Com (usually in Tools folder), and select Options; Settings; Remove my adapts.
    To invoke voice dialling, long-press the right softkey, wait until the beep and the display shows "speak now". It's best to wait a second or two even after that. Then say the name of the contact.
    If the phone gets a match, it will dial. Otherwise it will show the best match and list other options on the left softkey (Next).
    Hope this helps.
    I tried the above, but when he talks back he still sounds like a beaten up person.
    And worse, whatever i tell him, he keeps coming up with the wrong things. I have a feeling this whole dialing thing is based on US english and cannot handle any other languages (i tried english pronounciation and that fixed a few numbers, but 80% still doesn't work)
    How do i fix this? if it is not possible i will have to hand it back to my boss and ask him for something else as this is not usable while driving.Message Edited by ajak on 12-Apr-2007 08:03 PM

  • Some voice tags fail on e90 FW 210.34.75

    Hello, everybody.
    After upgrade to FW 210.34.75 some voice tags on my address book disappeared. Some contacts can be found by voice, and some -- not anymore.
    I reinstalled FW again, removed voice adapts, restored factory settings, on clean phone, without memory card, I imported address book from CSV file through PC Suite -- the same picture: I cannot voice dial the some of contacts, I dialed before.
    It looks that the problem is in the FW itself.
    I have 532 contacts in my address book.
    When I enter new contact into NEW address book, after factory reset, the voice tags (talking face in the address form) are appearing on the contacts, but if I restore or import my address book -- the same situation. About the half of addresses lost voice tags (the talking faces) and are not recognized by VD.
    Maybe, there are some limitations on the VD for E90?
    Could you please help me?
    Regards,
    Myk.

    If you can't get the upgrade through Nokia's website, try to walk into the nearest Nokia Care Centre and insist to have this device upgraded to the latest FW version in order to use the A-GPS features. This feature for the E90 is actually shown on Nokia's website if you search for A-GPS enabled devises. It took me some 15 minutes to convince the technical staff at Nokia Care Centre since they did not know their own website and products availability. It took them one phone call with Nokia's head office in Australia and subsequently another ten minutes to upgrade my phone. That means, the upgrade was available but not made accessible for the general public. Try your luck, this upgrade will greatly improve the GPS fix which took a couple of minutes in the past. Now I get a fix within seconds. I cannot, however, comment about any other improvements or bugs since I did not experience any so far.

  • 6300 voice tags

    Having updated from 6230i I am suprised at Nokia putting voice tags on all contacts.
    This makes voice recognition very difficult eg my voice works much better than my wifes.
    Why don't Nokia provide the ability to remove voice tags on contacts so you can limit the number to your most used and so improve the ability of the robot getting the right contact.
    To get round this problem I have put a few contacts in phone memory for use with Bluetooth so the phone is LEGAL when driving.(i.e it gets right contact and not a list)
    Nokia should take note, as at the moment the phone even with a bluetooth handset would not be legal in UK as you have to scroll/ use phone to get right contact

    I have a 6233 and there is no option for it to play the voice tag of the person that is calling me. I suspect it is the same for the 6300.

  • How to set up voice tags on the n70?

    Hi
    how do you add a voice tag to your contacts on the n70 phone pleeeeeeeeeeeeease!
    cheers Emma

    14-Apr-2006
    12:40 PM
    psycomatis wrote:
    and how i can make the vioce tag active?
    If you press and hold the right soft key at the standby screen the handset will ask you to "Speak now".
    S.
    History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
    Current: Samsung Galaxy Note3 Black

  • How do you add a voice tag to a contact

    how do you add a voice tag to a contact i phone5

    You don't need to add any sort of tags to call by voice. It's built into the system. Go to Settings>General>Siri and make sure it's set to On.
    To use Siri, press and hold the Home button. When the microphone icon pops up and there is a beep, say, "Call <name from your contacts>"
    Consult the manual for more information on Siri.

  • No voice tags after sync with PC Suite to N70

    Hi,
    I am having a problem with losing voice tags on my N70, after reading many postings and trying various solutions such as setting default number and nicknames, reset phone etc etc, I managed to get voice tags (pacman next to number) working by using format *#7370# but when I then sync using Nokia PC suite 6.70.22 via Bluetooth from Outlook 2003 on XP pro (SP1) corp build, all contacts added during and post sync do not have a voice tag generated?
    I do not think this is a hardware issue as all connections work fine, also do not think this is an issue with PC Suite as it resides on computer, I have also tried this on a machine with all the latest updates installed running Media Centre 2005 and Nokia PC suite 6.70.22, I get exactly the same result when syncing via Bluetooth or USB!!
    For obvious reasons I would like to be able to sync contacts and calendar and be able to keep the use of voice tags!!
    Is this a known bug and will later firmware resolve, is anyone else experiencing same or resolved this issue.
    By the way am running firmware *#0000#
    v 2.0539.1.2 19-10-05 RM-84
    Cheers, Baldrig

    Ok, I am assuming that either pc suite is so buggy that no one has had a chance to emulate this or that no one has this issue other than me and everyone is synchronising their outlook contacts with their N70 and are still able to us voice Tags?
    If anyone is experiencing this issue can they please let me know I am not the only person having this problem or preferably if anyone knows a fix please let me know so I can either ignore and forget ever using voice tags or allow me to use what would be a really useful feature?
    I am beginning to think this may be like a Microsoft built in feature
    Cheers, B

  • Not being able to remove the voice mailbox number ...

    Hello
    I would like to ask you guys here at Nokia why you can't remove the voice mail box phone number after setting it the first time. Why is it so?
    To reproduce this "bug" go Menu -> Messaging -> Voice call messages -> Voice mailbox no.
    Set the voice mailbox number.
    Then, try to restore the settings to what it was originally.
    It won't work.
    I have tried this on several newer Nokia phones.
    Why is it so? Could "OK" maybe move to the left soft key? No. Of course not.
    Did you know everyone doesn't have voicemail?
    Therefore some users use the 1 key as any other quick dial key.
    I suppose that in any good user interface you should be able to restore a setting to it's original setting. Not being able to do so without any warning of some kind is simply ridiculous.
    If there is some other limitation that prevents you from doing this, please let me know.

    Why is nobody answering this?
    I would be very happy to discuss this.

  • How I got Voice Tags to work on my E65

    If contact has a single telephone number the voice tag is automatically created for that number.
    If the contact has multiple telephone numbers a voice tag is created but not easy to find!!
    If you open a contact and scroll down the details on the right hand side of one of the telephone numbers is what looks like a “Pac-Mac”. With this number highlight press the “option” key and “Play voice tag” will be available. “Play voice tag” isn't avalible unless the number with the “pac-man” is selected.
    I've noticed that I update or edit a contact the “Play voice tag” disappears. To get it to re-appear I go out of the address book and back in, seems to work.
    HTH

    Have you downloaded the App?  If so, are you have issues with it?
    Does your iPod Touch meet the minimum requirements of havin iOS 4.0 or later?
    B-rock

  • Remove Empty XML Tags using module parameters

    Hi All,
    In my lanscape I have two PI Systems.
    My scenario is an IDOC reaches 1st PI system gets converted into an EDIFACT and then goes to the 2nd PI and from there it gets routed to the respective AS2 Party.
    I am using SOAP to pass message between the PI systems and B2B Toolkit's AS2 Adapter for the communication with AS2 party.
    The issue is when the message is getting converted from IDOC to EDIFACT there are a few feilds with occurence 1..1 and due to these fields i get an empty XML tag at the output. These empty XML tags give me an error in the B2B Toolkit's AS2 Adapter Receiver Channel
    I cannot change the occurence in the structure of the EDIFACT nor can I use an XSLT mapping to remove empty tags before the message reaches the Communication Channel.
    I want to know if there are any module parameters which i can use either in SOAP Channel or the AS2 Channel to remove the XML Tags.

    Hi Muni,
    "1..1 means, you must send some values for that fields. try to find out why these are not getting any values."
    This empty tag is expected. Before using B2B Toolkit's AS2 Adapter we used to use Seeburger's AS2 Adpater and the message used to get executed successfully with these empty tags.The issue is coming only when we are using B2B Toolkit's AS2 Adapter.
    "if you want to stop sending(the fields which are not needed in target) you can you can disable the fields in the message mapping."
    I cannot disable the feild in the mapping as some other message may use this field.
    Thanks,
    Farhaan

  • Removing message type tag in output file

    Hi guys,
    I'm new to XI. I have done an xml file to xml file scenario. It is working successfully
    The output file has a format
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:mt_xml_receiver xmlns:ns0="http://xml2xml">
         <DETAILS>
              <ID>111</ID>
              <NAME>Varun</NAME>
              <LOCATION>India</LOCATION>
              <ADD>Bangalore</ADD>
              <MOBILE>46572727</MOBILE>
              <EMAIL>[email protected]</EMAIL>
         </DETAILS>
    </ns0:mt_xml_receiver>
    I want to remove the additional tag present for the message type and i want the output in the format
    <?xml version="1.0" encoding="UTF-8"?>
         <DETAILS>
              <ID>111</ID>
              <NAME>Varun</NAME>
              <LOCATION>India</LOCATION>
              <ADD>Bangalore</ADD>
              <MOBILE>46572727</MOBILE>
              <EMAIL>[email protected]</EMAIL>
         </DETAILS>
    Can any one help me on how to achieve this???
    Pl help me on this guys
    Regards
    Varun

    HI Varun,
    This will help you..
    In the message type <b>mt_xml_receive</b>r there is a box where the namespace name is specified.
    Simply delete the same and activate the message type.
    In your case what you can do is as you dont want the message type name also.
    you can create the message type name as DETAILS instead of mt_xml_receiver.
    Regards,
    Sumit
    ps : reward points if tht helped u.

  • How to remove the header tag in the XML data ?

    Hi All,
    I am sending an XML data from SFTP to Proxy, in that I want to remove the header tag (first tag) from the xml, while loading the data. how to do that ?

    Hi,
          It is not about the thing that, whether your source is XML or flat file. If you dont want some thing in your source file , dont consider it and dont map it with your target structure. think that, your not getting the header in your source.  What is the header here.
    <Emp_details>
    <Emp_Id> Employee No </Emp_Id>
    <Emp_Name> Employee Name </Emp_Name>
    </Emp_details>
    <Emp_details>
    <Emp_Id> 1234 </Emp_Id>
    <Emp_Name> xxxx </Emp_Name>
    </Emp_details>
    <Emp_details>
    <Emp_Id> 5678 </Emp_Id>
    <Emp_Name> yyy </Emp_Name>
    </Emp_details>
    you have two fields under node Emp_details. What do u want to avoid here?
    Regards,
    Reyaz

  • 6280 voice tags

    Is there any way to override the automatic voice tags on the 6280. Nokia's crazy idea of generating them automatically does not work, and the whole concept is nothing short of dangerous in a handsfree-equipped car.
    I want to record my own voice tags, and not have to try to guess how Nokia's view of the world sounds.
    Martin (who now wishes he'd bought a Sony)

    Unfortunately there is no way to override them with your own tags. I am having similar problems with the N80. What you could try is to switch the language of the voice playback from Settings > Phone > Language settings and voice playback language. Choose another language. See if it helps in any way.

Maybe you are looking for