Remove nosuid option from nfs mounts on Mac Os X mountain lion

Hi there
I need to use sticky bit within an NFS export, and to use noowners mount option when I access NFS export from my mac.
So I have mounted the NFS export on my mac and performed a "chmod -R 7777 . " on the root directory of NFS export
I have modified the /etc/nfs.conf file as follows below:
Alessandros-MacBook-Pro:~ alessandro$ cat /etc/nfs.conf
# nfs.conf: the NFS configuration file
nfs.client.mount.options=nodev,noowners
when i mount the export using finder I can see the entry of my NFS export mounted with "noowners" option but also with "nosuid"
that prevents my export to follow sticky bit behaviour.
Alessandros-MacBook-Pro:~ root# mount
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
/dev/disk1s2 on /Volumes/unit (hfs, local, journaled)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
10.100.10.162:/test_nfs on /Volumes/test_nfs (nfs, nodev, nosuid, noowners, mounted by alessandro)
What could I do in order to do this action by finder preventing the nosuid option to be applied?
Best regards
Alex

I just found the anwer to my own issue. The installation failed on Jam Pack Content 3 disk. To finish the installation I need to go to the Logic Pro Main menu under the item Download supplemental content

Similar Messages

Reinstall from 2009 version on Mac OS X Mountain Lion

Reinstalling Logic Pro 9 version of 2009 on Mac OS X Mountain Lion 10.8.3 stop the installation before installing Jam Pack Content 2. Logic Pro installation fail to install. What I need to do to make complete installation successfull of Logic?
Thank You

I just found the anwer to my own issue. The installation failed on Jam Pack Content 3 disk. To finish the installation I need to go to the Logic Pro Main menu under the item Download supplemental content

How can i remove unwanted bookmarks from bookmark bar on MAC I'm using firefox 4.0.1 and on previous version Ff 3.6 I had organize bookmark button on this version I don't

how can i remove unwanted bookmarks from bookmark bar on MAC I'm using firefox 4.0.1 and on previous version Ff 3.6 I had organize bookmark button on this version I don't

http://support.mozilla.com/en-US/kb/Deleting%20Bookmarks?s=delete+bookmark&as=s
follow the above link it explains it all

All my Photos disappeared after I saved a photo from an email from my wife. I am running Mountain lion on Mac book pro 2012, help. What did I do wrong?

All my Photos disappeared after I saved a photo to Iphoto from an email from my wife. I am running Mountain lion on Mac book pro 2012, help. What did I do wrong?

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can no longer print from windows pc via mac/time machine in lion. Does anyone know why, I can no longer print from windows pc via mac/time machine in lion. Does anyone know why

I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.

I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors.

I would like to import the .abcdp files from my old, restored HD (was running mountain lion when the mac crashed) to the addressbook of my new mac (10.9.5)

I would like to import the .abcdp files from my old, restored HD (was running mountain lion when the mac crashed) to the addressbook of my new mac (10.9.5).
Please advise.

I don't have access to one.
I don't understand why the new address book is not backwards compatible with the data from former OS X versions.
In 10.8. preview was still able to read the files although it was already impossible to import them into the address book. But Why?

I own osx mountain lion with messages.When i go to create a new message i dont undrestand why you can send it to their email.also is it possible to send a message from my mac to another mac that has mountain lion. MacBook, OS X Mountain Lion, help me

I own osx mountain lion with messages.When i go to create a new message i dont undrestand why you can send it to their email.also is it possible to send a message from my mac to another mac that has mountain lion.
MacBook, OS X Mountain Lion, help me

The recipient needs to have Messages set up with the e-mail. Check the image below:
Hope it heps.
JP

HT4759 can I upgrade from snow leopard to current version of Mountain Lion on my Mac? So I can use icloud on all devices?

Can I upgrade from Snow Leopard - OS X 10.6 - on my current Mac to Mountain Lion - OS X 10.8.2? Or even up into IOS?

Welcome to the Apple Support Communities
As your Mac is running Mac OS X 10.6, first open  > Software Update and install Mac OS X 10.6.8. This update will add the App Store, so open it and try purchasing Mountain Lion. If your Mac is compatible, the computer will start downloading Mountain Lion.
While your Mac is downloading Mountain Lion, you should make a backup of your files. Also, check if your apps are supported > http://www.roaringapps.com
If your Mac isn't compatible with Mountain Lion, see if you can use OS X Lion > http://support.apple.com/kb/HT4949 If it's compatible, call Apple to purchase Lion > http://support.apple.com/kb/HE57

Update from Mac OS X 10.5.8 to Mac OS x Mountain Lion

Hello, can you tell me what are the steps to have Mac OS X Mountain Lion ?
Do I have to download all the versions between both ??? what does it cost ?
Thanks for answers !!!

Click here and read all three steps to the bottom.
(72503)

If you've installed the Mac OS X Mountain Lion and want to restore your MacBook to factory settings, what do you do?

Havinig a lot of problems with my MacBook since I've upgraded to the Mac OS X Mountain Lion program. Can someone tell me if it's possible to reset my computer back to factory settings?

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.

I have created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion. These accounts are for my kids and originally were setup with parental controls and time constraints. Thinking this was the problem I removed the time constraints, removed the parental controls, deleted and re-added them, and made them standard users. I have reinstalled, used disk utility to repair permissions, and made them admins. Any help is appreciated.

Users don't need Apple ID's. That's not the issue. Have you tried repairing permissions their accounts?
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
Repairing User Permissions in OS X Lion
You’ll need to reboot to perform this, and then use the same resetpassword utility that is used to change passwords in Lion, but instead choosing a hidden option.
When you use the Disk Utility app and Repair Permissions — it doesn’t actually repair the permission settings on folders and files in your Home folder where your documents and personal applications reside.
In Lion, there is an additional Repair Permissions application utility hidden away. This tool is located inside boot Repair Utilities. Here’s how to access it.
Restart Lion and hold down the Command and R keys. You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
In the Terminal window, type resetpassword and hit Return.
The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately.

How do I change a port in Mac OS X Mountain lion

Apparently Logmein makes use of port 2002 in mac OS X Mountain Lion. I need to use that for some new accounting software. How do I change the part in Mountain Lion and how would I do an install of Logmein on the computer to use another port or how, with Logmein currently installed do I change from port 2002 to some other port. The major question is how do you change port assignments in OS x Mountain Lion?
Thanks for you help.
Tom in Dallas

There isn't a generic way to do what you want. Not on Microsoft Windows. Not on OS X.
The ICANN registry of port numbers exists so that these messes don't happen, or don't happen very often. So that there are no port conflicts among various applications, and there are ways to request ephemeral (temporary) ports, and (for some applications) to find out which port(s) the application happens to have allocated and is using. In this case, it appears that folks at LogMeIn and with the accounting software didn't avail themselves of the ICANN port database. They're using the preferences mechanism as a work-around for that.
Have a look at ipfw and pfctl tools here (see man ipfw and man pfctl at the Terminal.app prompt), and see if you can figure out how you're going to map just one local application that's opening 2002 to some other port, without disturbing the other application that's mapping to that same port (and colliding). This is the remapping mechanism and akin to what can happen at some firewalls, and not the requested control over the selected port. It's not set up to remap local application conflicts.
The selected port is either a configuration option within the specific tool, or it's hard-coded within the tool. There's no generic registry of applications and ports. That's what the ICANN port registry is for.
The worst-bad-ugly approach is to dump out the executable code, reverse engineer it, and patch the preferred port right into the code; to change the code without using the original source code. Or some tool-specific configuration file or preferences setting, as and if available.

Photoshop elements 5.0 on mac OS X mountain lion?

Is it possible to install photoshop elements 5.0 on my mac OS X mountain lion? I found a cd with photoshop elements 5.0 on which it said mac but when i tried to install it, some kind of error showed on the screen, but it was only after a little while.

No way. This would require PPC code which Apple long have removed from OSX.
Mylenium

Acrobat 9 fails to recognize (scanner) Epson Artisan 730 after Mac Pro and Mountain Lion Upgrade

I had no problems scanning from the Epson Artisan 730 all in one until I upgraded my Powermac G5 to a mid-2010 Mac Pro with Mountain Lion 10.8. The printer is installed with most recent drivers from Epson (the install disk will not work on 10.8 anyway). I can scan directly from the Print and Scan system preference under the scan tab of the printer and it prints fine from Acrobat. When I go to Document -> Scan to PDF, it brings up a dialog box in which the first input is box is Scanner: "Please select a device" with up and down arrows on the right. When I click on the up and down arrows, there are no selection options other that "Please select a device" with a check mark next to it. This printer is wireless, as is another Canon which also has a scanner and neither appear as available. Very frustrating. I have repeated the instalation process (for the Epson downloaded driver utilities) and it just is not seen.
If anyone has any workarounds or solutions, I would be grateful.

1strail wrote:
Of course now I have a red badge on the App Store that is asking me to update the Epson driver. I wonder if that will blow out the TWAIN driver. It's epson14333.dmg.
No. Your TWAIN drivers are separate than the Image Capture Device drivers that would be installed by the printer driver update.
Also, no way of getting rid of the badge notification in system preferences. App store is not listed.
There is no law that you must update software just because it is available. There is no way to get rid of the red badge, but you don't have to do the upgrade.

HT4463 Mac OS X mountain lion, its get freeze at 52 mb.

i'm trying to download the Mac OS X mountain lion, its get freeze at 52 mb. what should i do to solve that please ??

Assuming it is not a keyboard issue...
Try to safe boot by holding down the "shift" key after you turn the computer and keep it held until you see an apple logo, spinning gear and progress bar. Using safe boot will take longer than a regular boot.
Then navigate to /Library/Prefrences/ and remove the com.apple.loginwindow.plist and lockfile. For good measure you can remove the com.apple.loginwindow.plist from the ~/Library/Preferences/ folder as well. Then restart the computer. If neither of those work, go back into safe boot and enable automatic logon in the Users & Groups.

Remove nosuid option from nfs mounts on Mac Os X mountain lion

Similar Messages

Maybe you are looking for