Remove old VPN profiles installed via Config Utility?

I've got an iPhone 4S running iOS 6. It has two VPN profiles that were created via Configuration Utility profiles. These two VPN profiles are no longer used, but I can't seem to find a way to remove them.
In Settings -> VPN, if you tap the blue arrow next to the profiles themselves, the only option available is the "Connec On Demand" On/Off switch. There is no "Delete VPN" button.
In Settings -> General -> Profiles, nothing is listed for me to remove.
How can I delete these two unused profiles?

Having same problems.
There is no such setting as "Profile" in General, but the old profile is invisible. The Cisco AnyConnect app says there is no profile either.
This "invisible" profile was installed on my old 3GS in order to block data transfer using 3G etc. Since the new iOS updates and then iPhone 5 update the option "Profile" in setting has dissapeared.
But it's still somewhere and it's still blocking my data connection. It's weird. I don't know how to get rid of it.

Similar Messages

  • Can't remove locked VPN Connections installed by HotSpot Shield

    How can I remove locked VPN connections under Network? (OS 10.9.5)
    HotSpot Shield installed three VPN connections under Network settings. I no longer subscribe to the service and have removed the application, but I'm unable to remove the network connections.
    Three VPN connections were created:
    "US Server"   utahmaps.us
    "GB Server"   jacketmagazine.us
    "JP Server"    brainphotos.us
    However, all these connections have the padlocked icon beside them, and I don't have the permissions to delete them.
    I'm including a screen capture of one of the settings, for reference.
    I can set them to inactive, but would like to remove them altogether.
    Can anyone offer any assistance?
    Thanks

    I have been looking for this answer also... I found it yesterday. if you go to profiles in system preferences, you will be able to delete those completely.

  • Do I need to remove old drivers before installing new ones (Windows XP)

    I have an  Acer Aspire 3690 laptop with Windows XP home edition installed. I've reinstalled the OS by using recovery tool, updated it again. I want to finish setting my laptop up by updating some drivers, mainly chipset and GPU. I've already found that newer ones are availabe. But do I need remove the old drivers first to avoid any problems in the future? Or do I just run the setup executable of every driver?

    Run the setup and check if the new one are installed; if not remove the old drivers and install the new.

  • Can't install configuration profile using iPhone Config Utility 3.5 and iPad iOS 5.1

    Sorry for the long title, but...
    I had a certificate expire in my configuration profile (that allows access to the Enterprise WiFi network). In the past, that means I go fetch a new certificate, install it into the configuration profile, attach the device to the computer via USB, and download that to the device. It's all good.
    With iCU 3.5 and iOS 5.1, that all works fine until the last step. I hit the install button - nothing happens. Zilch. Nada, Zero. I happen to be a developer as well, so I have Xcode open and am watching the device console. Absolutely nothing happens on the device console.
    What am I doing wrong? I can't believe that this is broken, and if it is broken I'm the first person to trip on it, so what's up?
    (I did workaround this problem by exporting and sharing the configuration via email to the device and installing it from the attachment. That part still seems to work, and the profile itself also seems to work. The problem seems to be with iCU and downloading profiles.)
    Thanks for your help.

    I ran into same problem. I think ithis might be your problem . This fixed mine I had settings already set and tried to install on new ipad and wouldn't work wouldn't do anything just set there I hit install and never did nothing. What I did was del the settings for configuration and re set them all over again and boom it's worked it works fine for me now. Hope this helps

  • IPhone Config Util stealing control from iTunes

    I installed iPhone Config Util and now it appears that when I attempt to sync the iPhone, iPhoto sees it but iTunes does not. Is there a way I can give control back to iTunes. I am not intending to manage the iPhone on an enterprise.

    Hmmm... It appears that all my Login items were removed from my account and iTunesHelper was the one which would allow iTunes to connect (noticed all this after rebooting the machine). iTunes will now recognize it if I manually start iTunes but will not auto-start when the iPhone is docked. Could not find iTunesHelper.
    Does anyone know where I can find iTunesHelper so I can add it to the Login items?
    I apologize if this does not belong on this list but this problem (of no Login items) appeared after upgrading Server Admin and adding iPhone Config Util to a newly upgraded 10.6 machine (non server).
    Paul

  • IPhone config utility won't work after Mavericks upgrade

    After my upgrade to Maverics, any time I try to use the iPhone Config Utility to install apps on my devices, when I click install, it crashes iPhone config utility.  I've already tried re-installing iPhone Config Utility - Any recommendations?  This is killing my productivity!

    If you are using the Apple configurator there is an update Apple has reasleased for it for support for Mavericks. It seems to be working for me but I'm also using it with the iPad 4th gen.

  • Old printer profile removals

    How do you remove old printer profiles from
    the Customize Proof Condition area under "Device to Simulate:
    Every six months new ones come out and the old one need
    to be removed.

    I don't think that they are different. In my view the "Working RGB' shows the current working profile.

  • Removing old itunes

    Ihave Windows XP service pack 3 with Itunes for my I phone. I tried toupdate to new itunes and now nothing works. I can not remove old itunes neither install new itunes 10.00 when I click on itunes I get 3/4 black screen.
    would appreciate help.
    [email protected]

    For those who may have similar problems, I answer my own query:
    I was stymied. Tried to load the software from CD
    that came with the nano. It halted and advised that I
    need to remove old versions.
    Questions:
    + Do I need to backup my current playlists (i.e.
    will they be "deleted" if I uninstall old itunes)
    Answer: NO. Itunes stores library in My Music folder. But the backup procedure is described in support
    + If so, how does one reinstall playlists? n/a
    + Why can't I remove the old ipod software (the
    remove/change procedure seems to leave the old
    softwhere right where it is even though acknowledging
    the process)
    Answer: I finally tried doing a search for "ipod" and then right clicked and chose "uninstall". That did the trick
    + If I have version 6 of itunes, do I really need to
    install new software?
    Answer: Don't know, but did it anyway
    + and, finally, if anyone has an abundance of time on
    their hands, care to provide a step-by-step on how to
    uninstall old and install new nano/itunes software?
    Answer: It's on the support site
    Appreciate your time,
    Best Regards,
    PeterJ

  • I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

    I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

    Install disk drive from old computer in an external enclosure.
    Then copy the complete iTunes library from the disk drive to the disk drive in the new computer.

  • REMOVING IPSEC VPN CONFIG FROM PIX 6.3 FIREWALL

    Hey,
    we have pix 6.3 serving as internet firewall and we are int process of replacing it with new ASA Device. currently there are several site to site and remote vpn are configured for access purposes. 
    i tried to remove one site2site ipsec vpn from pix and it starts acting like a loop generating the same error with qty that processor got 100% CPU, couldn't logged in through normal ssh so i connected via console and place back the isakmp and crypto map commands back in and the error stops.
    My purpose of this question is that how can i remove vpn config from pix without generating any error is there any formal process or order of removing rules from pix or we can do it one by one no order is required.
    MY PROCESS OF REMOVING CONFIG:
    REMOVE THE ACCESS-LIST INSIDEOUT AND OUTSIDE IN COMMANDS 
    REMOVE THE OBJECTS AND OBJECTS GROUPS
    REMOVE THE VPN DEFINED ACCESS-LIST FOR INTERESTING TRAFFIC
    REMOVE CRYPTO MAP TRANSFORM-SET
    REMOVE ISAKMP-POLICY
    REMOVE CRYPTO MAP 
    WE DO USE ISAKMP SHARED KAY MECHANISM "I DID NOT REMOVE THAT "
    BUT AS SOON AS I REMOVE THE CRYPTO MAP FROM THE PIX I GOT THIS ERROR
    IPSEC(crypto_map_check): crypto map XYZ 20 incomplete.  No peer or access-list specified.
    20 IS THE ISAKMP POLICY NUMBER & Peer and Access-list was removed from pix
    any help would great
    regards

    Hi
    You could do either of 2 things.
    1) Enable NAT-Traversal on your ASA
    2) Add the following on your pix :
    fixup protocol esp-ike
    This allows one IPSEC connection to run through PAT.
    HTH
    Jon

  • Iphone Config util and profiles...

    Is there a way to create a database for iphone users profiles or must I build a workstation just for profiles.

    Hmmm... It appears that all my Login items were removed from my account and iTunesHelper was the one which would allow iTunes to connect (noticed all this after rebooting the machine). iTunes will now recognize it if I manually start iTunes but will not auto-start when the iPhone is docked. Could not find iTunesHelper.
    Does anyone know where I can find iTunesHelper so I can add it to the Login items?
    I apologize if this does not belong on this list but this problem (of no Login items) appeared after upgrading Server Admin and adding iPhone Config Util to a newly upgraded 10.6 machine (non server).
    Paul

  • Firefox new install on XP, problems trying to get same-version-Firefox old W2K profile to run.

    I'm moving from a W2KproSP4 (Win2000, Windows 2000) machine to an XPproSP3 (WinXP) machine. I was running AVG 9.0 and Firefox 3.6.7 with FireFTP, NoScript, WOT, and screengrabber(?). I installed Firefox on the XP machine, launched it to create a profile, and closed it. I copied the old profile folder contents into the new one.
    On launch: "Malformed file" "Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem." (This error disappears in Firefox Safe Mode.) Install.rdf is on the old drive at \Program Files\AVG\AVG9\Firefox.
    "alert" "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory."
    When I click on Tools/Addons, "An error occurred during a connection to services.addons.mozilla.org:443. Can't connect securely because the SSL protocol has been disabled."
    I tried uninstalling AVG and Firefox and installing Firefox first. (That helped me with Link Scanner related non-launch on another XP machine.) Depending on which combination of old & new profile files I have, I get some combination of the above 3 errors and not launching at all. (It may show for about 1 second in Task Manager, then quit.)
    P.S. I am posting this from my old W98SE machine, running Firefox 2.0 since it won't launch anything newer. I never did solve that mystery.
    == This happened ==
    Every time Firefox opened
    == I am moving to a new O/S

    Hi the-edmeister, thank you so much for your time.
    I'm proceeding more cautiously now, and trying to get my most crucial info back one step at a time. The situation seemed to be getting worse, so I fell back a ways for a fresh swing at it:
    I just restored to a Ghost of the XP before I installed Firefox, uninstalled AVG, and installed the same version of Firefox (3.6.7) as my old computer had. The W2K's old drive is slaved to my new HD, so I have access to the old files in (what is now) H:.
    I tried to restore bookmarks-2010-07-24.json from my old bookmarkbackups directory and got "unable to process backup file". (I also tried copying several files to the bookmarkbackups dir and restoring from there, but got the same error message.) Help>TroubleshootingInfo confirms the current profile folder, and the copied JSONs were seen by OrganizeBookmarks>Import-and-Backup>Restore.
    Then I copied places.sqlite from the old profile to the new one, but Firefox doesn't see my bookmarks. When I backup bookmarks to my desktop, I get a zero length .JSON file. Is there a trick to making places.sqlite active?
    BTW, yes, I've tried to update the Firefox version 2.0 on the W98SE, most recently to 2.0.0.20, but whenever I do, it runs invisibly (is present in Program Manager but doesn't display the window.) I have to uninstall and reinstall 2.0 to have a working Firefox on this beast. Thanks for noticing. That's another topic, tho.

  • AnyConnect 3.1.01065 error - Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established.

    I've got a user running:
    AnyConnect 3.1.01065
    on
    Windows 7 64bit.
    Several weeks ago she started encountering the following error:
    -after logging into Windows and launching the AnyConnect client, she enters her username and password and successfully authenticates.
    -the connection is not established and she's presented with the following message: "Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established."
    After doing some troubleshooting, inlcuding uninstalling/reinstalling the anyconnect client, it seems the culprit is the following file:
    C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\<filename>.xml. When the problem occurs (which is not regularly, sometimes it occurs daily, sometimes just once a week) examining that file indicates it has no security or permissions set. Quitting the AnyConnect software, modifying the file so that the user has full control of it, then relaunching AnyConnect fixes the problem (until it happens again). Uninstalling, and making sure to move C:\ProgramData\Cisco to the trash, then reinstalling did not seem to help.
    The closest match in these forums is the following thread, https://supportforums.cisco.com/message/3760446 - though no clear resolution was given.
    Has anyone else encountered this, and been able to fix it?
    Thanks much.

    Just FYI, it seems at least in this case, purging all the previous system restore points seems to have resolved this issue...

  • Profiles - I have an iPad 1st gen, run iOS5 have have a Profile set up with Lotus Notes to get work email. I want to get a VPN so i can access blocked sites as I travel around the world. The VPN will install a new profile. Can I have more than one

    I have an iPad 1 and have a profile set up with Lotus Notes for work email.  As I travel around the world I want to install a VPN ( my companies uses a VPN but it is only for work)  so I can visit blocked sites.  When I install the VPN it want to change the profile.  Can I have more than one profile on the iPad or will the VPN overwrite the Lotus Notes profile?
    max

    Yes, you can have more than one profile installed.

  • After refomatting HDD, reinstalling Vista plus service packs, recovering files from Microsoft backup and installing new copy of Firefox 3.6, Firefox will not run. Have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.

    After computer would not boot and could not be repaired, I reformatted the HDD, reinstalled Vista plus all service packs and updates, recovered files from Microsoft backup and installed new copy of Firefox 3.6. Firefox will not run.
    I have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.
    After intallation was completed, the automatic startup just placed a small box on the screen "Import wiz". This just sat there with no activity. After I closed this box, none of the Firefox start buttons would open the program -- just the blue rotating icon for about 2 seconds then nothing.

    Hi,
    Please try to rebuil the WMI repository.
    For detailed information, please refer to the blog below,
    http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
    If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
    Best Regards.
    Steven Lee
    TechNet Community Support

Maybe you are looking for