Remove open workitem from user inbox after the workflow starts again.

I have heard that there is a possibility to remove a open workitem from the user inbox, after the workflow starts again for the same object (data update), via a termiantion event. I have searched in the sap workflow dokumentation but i could not find out how to use this. Could somebody provide me some detailed documentation or examples how to use this for my problem?
Thanks,
Steve

Hi Sudhir,
the workitem which should terminate is a decision task with two results. The wolkflow looks as follows:
Activity: Read Data
Decision: Approval Check Decision
Activities: Approve or Reject
How should it look like in your opinion with the termination? How looks this option to terminate this workitem? The workitem should terminate automatically from the userinbox if the workflow starts again for the same object (with updated data).
Thanks,
Steve
Edited by: Steve Malack on Mar 13, 2008 10:20 AM

Similar Messages

Workitem is not removed from User Inbox

Hi,
There is requirement, when the PR is created by user, first it has to go his department Head and then to Manager, AGM, GM, etc. There are different departments.
I'm maintaining organizational structure and giving positions in Release Strategy. Now how can i know who has created and to whom it has to go first. Shall i create different release strategy for that ?? Or is there any other way ??
And i tried to create custom workflow and using two release steps instead of one. And giving Rule in my first release step. And in second release step i'm using the strategy. When i create the PR and release, it is not removing from User Inbox.
Do anyone know what could be the problem ??

Hi,
From your requirement, its not a good idea to have all department heads assigned to a single position.
But, you can have different positons for different departments and the association between department and the corresponding position number can be maintained in ztable. Then have a custom rule based on function module which will make a call to this ztable and find the corresponding postion given the department of user, get this position out and use it as agent assignment in step. However to use above first you should be able to find the Deparment to which a given user belongs to.
the position that you are talking about in your question, is it a position with relevance to HR structure or is it just that you have created for workflow purpose. In general its a good idea to have bit strong dependency with HR structure rather than going for workflow specific positions. If your position is a HR position then probably with bit of reengineering the HR organization structure with respect to your departments would be good and with a good design of org structure you can also get rid of any new custom table to maintain the relation between department and corresponding position.
Good Luck !!
Regards
Krishna Mohan
ooops !! many replies came in while drafting this mail itself, i guess rule using custom table already tried !!
Edited by: Dubbaka Krishna Mohan on Jan 29, 2008 9:20 AM

E payment should be enabled so that the user could make payment directly from SAP and after the payment is verified ,approved and authorized by the concerned users responsible the payment should be electronically transferred to the payee's bank account th

E payment should be enabled so that the user could make payment directly from SAP and after the payment is verified ,approved and authorized by the concerned users responsible the payment should be electronically transferred to the payee’s bank account through our bank.

Thanks,
I usually use the OS connection option. So as you suggest, connect without the ISP connection software. Doing so does not by-pass the sudo command being active in Activity Monitor however.
On reading my post I see my failure to link the concerns of the laptop purchase with the sudo and modem. My thought here is of an intersection of known vulnerability with this widely used modem/software (via permanent sudo process activated) and that vulnerability then being known and utilised by another party(s).
I am pursuing the issue in part with consideration to a broader possible issue of vulnerability.
Thanks again for your thoughts and suggestions. Valued.

Will whatsapp be removed from iPhone 4 after the launch of iPhone 6?

Will whatsapp be removed from iPhone 4 after the launch of iPhone 6?

The release of a new product does not necessarily affect existing apps.
It is common for developers to redesign/update their apps when a new version of iOS is released, and this can mean a particular app is no longer compatible with a certain phone if that phone can't run a new enough version of iOS.
When iOS 7 was released, many apps were redesigned for iOS 7 and were only available if you had iOS 7 on your device. This left the iPhone 3GS and older iPhones in the dust, if you will.
The existence of the next iPhone will not necessarily mean existing apps will stop working/be pulled.
~Lyssa

I removed the applications of photoshop en lightroom from my computer after the free trial. Now I have a paid contract and I cannot download the apllications. What to do?

I removed the applications of photoshop en lightroom from my computer after the free trial. Now I have a paid contract and I cannot download the apllications. What to do?

Hi, sad isn't it!
Is this a PPC iMac, or an Inel iMac?
If PPC...
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
In fact, it will run on Imtel Macs upto 10.6.8 also.

Error in opening Workitems from UWL

Hi All,
I am trying to open a transaction from the workflow using a dialog task.
when i execute the workitem from SAP business workplace the task gets execute properly.
but when i try to run the same task from UWL it opens the SAP easy access screen.
All my other workitem like leave request approver are getting opened properly from UWL.
This might be related to some UWL configuration. I searched all the forums there are many similar questions but could not get any answer.
Regards,
Umesh Chaudhari.

Hi ,
please find the following solution .it will definitely work .
If you leave configuration is done.
There was an incorrect data in your system. To do these please follow following process.
delete this request using
PTARQ> Delete documents (RPTARQDBDEl)
Please read the report documentation before
deleting the request but it should be safe as it is
a development system.
Please delete this with the above information or delete all
the records for the approver.
After this,, there will be some incorrect workitem in approver inbox.
You need to clear that also by Tcode - SWWL.
Also try following
Can you check if the Pernr used
has correct information like It0105 etc, also the rules are
correctly defined.
For the Employee, First of all check the Period Work Schedule also
the Quotas of the pernr needs to maintained in 2006, Please do
this customisation and it should solve the issue.
Maintain the absence quota in the IT2006 and then try once.
Also make sure that the Settings in Webmo and PTARQ etc all is done
The pernr belongs to the a Rule and have absences defined for him.

How can i autoforward that mail from SAP INBOX to the outlook

Hi ,
My Requirement is that,
I have to send an email to outlook, whenever PO Created in SRM System
I have created custom workflow, i have added a sendmailtask step, i given the SAP userid to send SAP Mail to the user.
It is sending SAP Mail to the User to his inbox perfectly.
Now, how can i autoforward that mail from SAP INBOX to the outlook. This is has to work for all users.
Please give some suggestions. ot it can be achived any other way.
Note: This is Email Message not a workitem.
I have doubt that RSWW program will work only for workitems.*
Thanks & Regards,
Suresh.

Hi ST,
what I understand from your requirement is that you are able to send messages using SendMail Step to SAP Inbox and now you want it to be sent to users Outlook.
Here you need to create a container which would store users email address of Outlook (which would be stored in SU01 or in a ztable), use this container in your Send Mail step and in the Recepient Type as email.
Hope it helps.
Aditya

Disable or Remove some field from User Profile in Personalize iView

Hi All,
I have a requirement to Disable one field and Remove one field from User Profile in Personalize iView.
i want to disable Activate Accessibility Feature field and Remove Language field.
How to archive this.
Thanks and Regards
Trilochan

Hi,
You can use [Personalization|http://help.sap.com/saphelp_nw70/helpdata/en/42/ed3ce7f8593eebe10000000a1553f7/frameset.htm] to do this :
1. logon as an admin and navigate to Portal Content > Portal Users > Standard Portal Users and open Every User Core Role
2. right click on User Profile and select edit
3. click on the Preview button then right click + CTRL on the iView and personalize the User Profile iView
That's it.
Regards,
Pierre

I downloaded a word file from an inbox mail (the mail app) onto my iPad2, where is this file stored? How can I delete it if it takes up space in my iPad? Any ideas??

I downloaded a word file from an inbox mail (the mail app) onto my iPad, where is this file stored? How can I delete it if it takes up space in my iPad? Any ideas??

Did you ever figure out what happened?
I had the same experience as you did, but in my case it was a big fat pdf that Mail insisted I had to download before I could view it. As happened with you, I saw the file actually downloading, and after a time I was able to view the pdf. It's been my assumption that the pdf is still somewhere on my iPad, but I have no idea where, nor how to delete it if it is still there.
Thanks.

How to remove "open dns" from imac

how to remove "open dns" from imac

Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and delete the server addresses. Click OK and then Apply.

TS1424 i can open Itunes on my laptop after the latest update i did on my computer

i can open Itunes on my laptop after the latest update i did on my computer

Run time Error
program:c:\program files \itunes\itunes.exe
r6034
an application has made an attempt to load the c runtime library incorrectly
please contact the application's support team for more information
Many thanks, that's perfect. With that one try the following user tip:
Troubleshooting issues with iTunes for Windows updates

How to remove a meter from an installation after move-out

Hi,
Could anyone please tell me how to remove a meter from an installation after move-out and if the installation was blocked before move-out.
I was trying to remove the meter from an installation which was blocked before move-out. And if i remove the blocking after move-out, it is still giving me this message that the installation is blocked.
Thanks in advance.
Mahavir

Dear Birendra,
You can NEVER remove a Device (for Billing Related or FULL removal), since you need to save a Removal read while doing the removal. Hence, you can not create a MR ( Reason 01/02/03/06/16/17/21/22), without a Active contract. This is a Basic Metering Rule.
You will have to do the removal on the same day of the Move out.
Any additional questions?
KR,
AAL!

How do I completely remove Open Office from my laptop?

The long story on this is, I needed a word processing program. I'm creating a song list book for Karaoke. The karaoke software that I use will generate a song book as I Import songs to my hard drive. Well I went to Open Office website and downloaded their free shareware. What a mistake that was... My Question is how do i completely remove Open Office from my laptop? Any help or Ideas would be great. I did the usual steps of going through the control panel and uninstalled that software. But it's still on my system. I'm not a computer geek, and I'm I T challanged. LOL.
Any Ideas Thanks
KJRob2015

KJRob2015 wrote:
The long story on this is, I needed a word processing program. I'm creating a song list book for Karaoke. The karaoke software that I use will generate a song book as I Import songs to my hard drive. Well I went to Open Office website and downloaded their free shareware. What a mistake that was... My Question is how do i completely remove Open Office from my laptop? Any help or Ideas would be great. I did the usual steps of going through the control panel and uninstalled that software. But it's still on my system. I'm not a computer geek, and I'm I T challanged. LOL.
Any Ideas Thanks
KJRob2015
Go to your Control panel and then look at "Programs" and click on Uninstall programs and from there scroll down to the Open Office program and click on it and uninstall it.
Or see this GUI link...
http://www.wikihow.com/Uninstall-OpenOffice
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

TS2755 I turned off MMS today and suddenly all my text messages dissapeared from SMS 'inbox'. switched the iphone 4s on and off many times, nothing. If I search for an old text message by text I can see it, but it's not in the box of SMS

I turned off MMS today and suddenly all my text messages dissapeared from SMS 'inbox'. switched the iphone 4s on and off many times, nothing. If I search for an old text message by text I can see it, but it's not in the box of SMS

show this link to your friend http://support.apple.com/kb/ts5185

Remove open workitem from user inbox after the workflow starts again.

Similar Messages

Maybe you are looking for