Remove option from variable entry screen

Hi all,
I have to remove some option from the variable entry screen as the user dont required that...
How to remove that?
please let me know step by step....

Hi,
Do you want to remove some values for the variable and wish to show only few values which the user will select and fill in the variable screen or you want to change the no.of variables displayed in the variable screen and show only few variables?
If you want to do the first,
Restrict the values for that variable in the Query itself(in Query Designer) which can be done as follows...
Create a variable for a Characteristic and add it under "Default Values",then restrict the values for that variable.Now this will allow you to select the restricted values through the variable screen.
If you want to do the second,
Go to Personalized settings,and personalize the variables.You can also Modify the selection of values there as well.
Now you can show only the required variables in the variable screen.
If you want to create a variant(Global/Local) for the variables,that is also possible thorugh vairable screen.
Hope this helps you!
Rgds,
Murali

Similar Messages

Variable entry screen from BW in webdynpro

Hi all,
    can I use the variable entry screen for a BEx query to access all the user inputted values in a webdynpro application.
    I want to launch this screen from within the webdynpro application, and once the user presses "Execute", I want all the user selections back in the application.
    Is this possible at all?
Thanks,
Satyajit.

Hi Satyajit,
Since the variable entry screen orignates from the BI system in conjunction with a web template it cannot be invoked separately. Do you plan to run the web application within a Web Dynpro application (i.e. an iFrame)? One option would be to use the BI Java SDK to populate the values in a user selection screen and then use the user's selection to execute a query or MDX statement. Of course you Web Dynpro app is responsible for rendering the result set.
Regards,
Oliver

Question on WAD's "Variable Entry" screen values

Hi,
I've one Web Template Report contains "Variable Entry" screen.
It has one entry for Plant.
Also inside a report I'm having one DropDownList that is for Plant only.
My Requirement is:
If I enter some "1000" as a input in Plant at Variable screen, that same "1000" should be passed inside the report. And that corresponding DropDownList should show the "1000" as the selected value.
Now I'm getting "Show all values" as the default selected item.
Kindly suggest to achive this requirement.
Full points will be given.
Thanks
-Jay Jay

Hi,
1)If i didn't give any value in Variable Entry screen, in the result DropDownList shows "No data" in disabled mode.
Ans. Since you have not checked "Display All Values", i think if you dont give any selection in the Variable Screen, the DropDown box will not be highlighted.
2)The Selected plant Not only having Name and id, But also having all characteristics like, 1402,Pen,Business Partner: xxxxx, Distribution channel:xxx, etc.,
Ans. Since we are reading from the Master Data, i think all these values will also be displayed.
I still dont know if you are using WAD 3.5 or 7 ? Maybe we have better options in 7. You can try with different properties.
Hope it helps.

Changing the heading in the variable entry screen

Hi,
I have the varible entry in my web template where in the user enter the starting year and ending year .The heading of the Variable entry screen is defaulty Variable entry I wanto change the heading from Variable entry to Years
In 3.5 WAD what ever description is assigned to the webtemplate appears as the heading for variable entry scree but this is not happening in 7.0
Pls let me know how can this be done
Thansk
Sany

Hi Satyajit,
Since the variable entry screen orignates from the BI system in conjunction with a web template it cannot be invoked separately. Do you plan to run the web application within a Web Dynpro application (i.e. an iFrame)? One option would be to use the BI Java SDK to populate the values in a user selection screen and then use the user's selection to execute a query or MDX statement. Of course you Web Dynpro app is responsible for rendering the result set.
Regards,
Oliver

Variable entry screen for query doesnt show selection values.

Hi,
I've created a query with date varibale Quarter From-To. When i execute this query, the variable entry screen pops up but when i try to select values just shows ??? and not the text.
if i run the same query in RSRT the variable entry screen pops up but here the selection values are present for me to choose from.
can anyone tell why the values arent showing when the query is executed.
Thanks

yes, it seems to be a problem with NetWeaver BI BEx Java Web runtime as it works in RSRT and web analyzer. Found a note on marketplace note 125357 - No values displayed for attributes in input help but this did not resolve issue.
A call has been raised now as it seems to be a product fault

History of user Input values in variable entry screen

Hi Experts,
I have a small issue. I have a variable entry screen where I select values from the list. I can always see the history of variable values I input earlier when I click on the dropdown box. For example the country code displays all my previous inputs.
Similar to the web browsers history.
Not the same case with Fiscal Year/Period. I do the same type of selection from the combo box for example 12.2006. I give different values again like 1.2007, 2.2007 etc and run the report several times. But it doesn't show up the history of my previous entries unlike the country code.
Kindly help, points assured.
Thanks,
Raj.

What we've done isn't pretty, and I'm hoping for a better solution.
We've developed 3 ODSs that we've exported a full list of all attributes and their values to. Each ODS is identical.
We've then created an InfoSet to link the Product Cube to each of the 3 ODSs. We can then add 3 variables to the query representing each ODSs. Since the ODS holds over half a million attributes, we limited it to 3 since it takes 30 minutes to run.
It's not elegant, it's not pretty, and I'm sure it's not optimal. I'm hoping someone can describe a better solution.

Selection option for variable entry in BEx in 2004s

Hi All,
Have any of you noticed that the selection option functionality for variable entry while creating a variable does not allow wild card entry,Even though you create the variable with selection option as input.
In 3.5 we had option the option "contains the pattern " but in 2004s its not available in the variable entry screen.

Hello Guys,
When I posted this thread we were upgrading to SP11, now I am in the middle of another upgrade (SP15) and I still notice that wild card option is yet to be made available for a variable of type selection option.
Back then I had sent a message to SAP and was told that the functionality would be rolled out in new SP's. I am very curious as too how others are handling this problem, as they are bound to be reports for which such variables are a must.
P.S - The option has been made available
Edited by: Karthik on Jul 22, 2008 6:52 PM

My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premier

My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!

Hi Bryan,
My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!
Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
Hope that works for you.
Kevin

I can´t remove win from my mac because I can´t select the remove option from boot camp assist. Can anybody help me?

I can´t remove windows partition from my mac because I´can´t select the remove option from boot camp assit. Can any body help me?

open disc utility choose the drive you need partitioning highlight the bootcamp partition and click on the minus sign at the bottom left.
after this manually resize your drive by dragging the partition line all the way down and click on partition.

I was trying to move my photos from the iPhoto library to an external hard drive. I now have a desktop display of thousands of cascading photos. How do I remove them from my desktop screen?

I was trying to move my photos from the iPhoto library to an external hard drive. I now have a desktop display of thousands of cascading photos. How do I remove them from my desktop screen?

Strangely enough we can not see you so it really helps if you share with use exactly what you have, exactly what you did and details about the problem
what version of iPhoto and of the OS? What exact steps did you do? where are you seeing these "thousands of cascading photos" now and using what software and what exactly did you want to accomplish
The correct way to move your iphoto library to an external drive is to verify the drive is formatted Mac OS extended (journal) and then drag the iphotl library intact as a single entity to is
The correct way to move some or all of your photos is to select them in iphoto and export 9file menu ==> export -- https://discussions.apple.com/docs/DOC-4921 ) to the external drive
LN

How to remove items from iPad home screen?

How to remove items from iPad home screen?

Press and hold any of the apps and after a couple of seconds or so they should start to shake. Then press the 'x' in the left corner to delete the ones that you don't want, and when you've finished deleting press the home button so as to stop the shaking. If you don't get the 'x' on any of the apps that you've downloaded (you can't delete built-in apps) then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'

Changing the variable entry screen in web?

Hi
I have copied and amended the standard web template and that's all fine. I now have a requirement to change the design of the variable entry screen. I need to be able to show the name of the query that has raised the variable screen. Is this possible? Can I change a different web template to achieve this?
Many thanks
Trish

Hi,
I need to do the same, were you able to display query name on variable entry screen, please share how you managed to solve this ?
Thanks in advance...

Removing Shortcuts from my home screen/page.

How do I remove shortcuts from my home screen? I added a few by mistake How do I get them off my home screen? I don't want to uninstall them, I just want the shortcutt off my home scree/page.

Glad it worked. I came back to give you a link to Android's manual which will tell you other tips and tricks for using your phone's operating system. You can view it in pdf form here or html with hyperlinks here.

Removing Key Date from variable input screen

Hi Experts,
I am trying to remove the "key date" entry from the variable input screen so users dont see this value when they are trying to run a query. Can you please advise me on how to do this?
Thanks in advance.

Hi Paul,
You would need to open the query and remove this variable from the query definition, or if you need this variable and then remove the ready for input check mark from the variable definition.
Hope this helps...

Remove Options from iView, Page - Tray

How do I remove the Options from an iView, Page Tray in ESS & MSS:
'Add to Favorites' Option
'Details' Option
'Expand'/'Collapse' Icon in Tray
'Help' Option
'Open in New Window' Option
'Personalize' Option
'Refresh' Option
'Remove' Option
I wish do this global for my ESS and MSS user when they view any Pages and iViews
Thanks
WB

Hi there,
Make the necessary settings here:
SPRO -> Personnel Management -> Employee Self-Service -> General Settings -> Homepage for Self-Services -> Resources-> Define Resources -> Define Resources (Add Entries)
Changes made to this service will appear in ESS/MSS and will affect the Icons the manager or an employee will be able to see on the portal.
Goto the below link too:
http://help.sap.com/saphelp_erp2004/helpdata/en/f6/263359f8c14ef98384ae7a2becd156/frameset.htm
Regards,
Ponneswari.

Remove option from variable entry screen

Similar Messages

Maybe you are looking for