Remove partial PGI

Hi Guru,
My requirement is to chnage the scheduled quantity of schedule lines because goods was not deleivered/partial delivered.
This is a STO scenario. But PGI has been done in delivering plant.
When I want to change the schedule quantity, system gives message that schedule quantity can not be less than issued quantity.
Hence I want to reverese the PGI.
I cant use the T code VL09 as it reverse the complete PGI. I want to reverse only one item, but this PGI document has other line item as well.
There is one more schedule line for which partial quantity was received while PGI was one for full quantity. How to reverse PGI for partial quantity.
Need your help as its little urgent.
Regards
sapmm

hi
use the MIGO transaction enter the goods issue document number and select the item to be reversed. and save

Similar Messages

  • How to remove partial download music from ipod after my software update.

    How to remove partial download icloud music from ipod.

    If this has nothing to do with iTunes Match, then sync with iTunes and choose which albums, etc to sync or unsync.

  • I started downloading a movie series but half way through it said i didnt have room. How do i remove partially downloaded movies?

    I need to know how to remove partially downloaded movies from the storage space

    Hi karenfromforestburg,
    If you are having issues clearing a partial download from the iTunes Store, you may find the following article helpful:
    iTunes Store: Alert when downloading purchased videos
    http://support.apple.com/kb/TS1566
    Regards,
    - Brenden

  • Partial PGI

    With reference to sale order(5 line items), delivery order created . During Delivery, two of the line items are not avaialble and we require to do partial PGI for the three line items in the D.O. without deleting the  line items.
    Please suggest how to do Partial PGI in above condition.
    BSR

    Hi,
    I'm presuming that WM is active. While doing picking thru Transfer Order, you can choose "Foreground" whic will take you the screen where you can put the Quantities avalable. Now while confirming the same TO, it'll ask for "Confirm Differences", check the Quantities again and press "confirm Differences" button.
    Now out of Sales order Quantity (let's say 5 units), Quantity less than 5 unit is picked/confirmed. Now you can do PGI as usual.
    Regards
    SD

  • About the partial PGI for DN

    Dear experts:
                      I have a doubt in the processing of shipping.
                      I have a sales order with QTY 100 PCS, and then i create a DN A with QTY 100.
                      When the manufactory have finished partial goods,i want to post PGI such as 40.
                      After i finish the PGI with QTY 40,while i want to finish remainder 60  PCS PGI.
                      I must create another DN with QTY 60 to make PGI.
                      If i can post all PGI on the same DN?
                      Complete or partial?
                        Pls give me some advice.

    Stephan,
    As suggested in standard after PGI, you can not modify the delivery. And System doesnt Allow partial PGI function.
    As per your situation, You have two option
    1. Create another delivery with the remaining 60 Qtys and do PGI.
    2. Reverse the PGI, and change the quantity to 100 and proceed further.
    Thanks,
    Raja

  • How to remove partially downloaded files in 10.6

    I could not find any recent helpful answers via Google, but eventually discovered, by trial and error, that you need to delete the failed downloads in three places namely:
    /Library/Updates (this is probably unnecessary)
    and the *two* files here:-
    /private/var/folders/<complicated long path>/<name>
    where <name> ends in .pkg and also in .pkg.resumeData (i.e. the "same name" twice)
    I found out where these were being saved by (*immediately* after the update-failure), typing
    find /private/var/folders -newerct "1 minute ago" -name "*.resumeData"
    and sure enough, these corresponded to the failed downloads. I removed them with
    sudo rm /private/var/folders/<complicated long path discovered via find/<name>.pgk
    sudo rm /private/var/folders/<complicated long path discovered via find/<name>.pgk.resumeData
    and then the software update started working again instead of always aborting with e.g. "iTunes: partially downloaded" etc.
    The reason for the original failure is my poor internet service that constantly breaks halfway through any long-ish downloads.
    An example of the actual filepath on my 10.6.8 Mac OSX is:
    /private/var/folders/02/027LjtRMGXSZNggzpqLQg++++TI/-Caches-/com.apple.SoftwareU pdate/swcdn.apple.com/content/downloads/<same amount again in length>
    in other words, really long winded and very difficult to find (I have been trying to do this all day and could not find anything via the www) - I hope it helps you!

    I deleted the 76% partially downloaded updates from hd>library>updates
    now im at 11% where would I find the rest and how?
    thanks.

  • Remove partial colour cast caused by out of focus bars? help please!!!

    I have several lovely images with a partial green horizontal colour cast caused by very out of focus bars, can anyone help me remove these? (without cloning!)
    as shown here, across tigers head!
    Thanks so much
    Emma

    why no cloning? they're an endangered species, do you want them to die out?
    On a more serious note, you can fix this with a Curves adjustment layer with a Layer Mask made with the Gradient Tool set to Reflected. Set two sample points in the tiger's head, one in a white part of his fur and one in a black stripe and then modify the channels in those two points while looking at the Info panel to make sure that you get those two points neutral. After that you will need to modify the RGB "channel" to get it to blend in with the rest of the image. It should look something like this:
    And here's my result:

  • Remove partially downloaded iTunes movie from iPad

    I tried to download a movie to my iPad but the download stopped in the middle as there was not enough storage.  Now the partial movie is stuck on my iPad and I cannot remove it.  I have removed almost all data from my iPad to create more space but this hasn't helped.  When the iPad is connected to my Mac nothing shows in movies but there is a huge chunk of data showing in "Other" in the bar at the bottom.  When I try to manage storage on the iPad, the video app shows "no data".  I have looked at this problem in support communities and people have said that I must download the entire movie before I can delete it.  However, when I try to complete the download I still get message that there isn't enough available storage even though there is a lot of available space onthe iPad.  My iPad has iOS 7.0.4

    what is the Other on my iPhone and How to Remove It
    Summary
    What is the Other on my iPhone? Now the Other is taking up 1.9GB space on iPhone 4, how can I remove it and release the space?
    oneClean - Clean Up Your iPhone iPad  
    Reclaim up to 40% free space on your iPhone with One-click. Start download now before reading this What is the Other on my iPhone guide.
    Symptom: Frankly I rarely cared about the free space on my iPhone until it ran out today and my iPhone 4 warned me to release some space. The first thing that I were considering initially was to delete some large game Apps. But when I connected to my computer, I noticed that a "Other" bar was consuming 2.5 GB of my iPhone's 13.57 GB. Does anyone know what the Other means on my iPhone?
    Don't Miss: How Can I Transfer Music from iPhone to iTunes
    What is taking up "Other" space on my iPhone
    Analysis: Some of you may think the Other on your iPhone is the pure OS taken space or Safari, email temporary data. But that’s not the complete answer.
    Part of that Other space on iPhone is taken up by iOS, the operating system running on your iPhone. For this part, this is no way to reclaim the free space from that. However, the Other part of iPhone storage space also contains sort of caches and temp files generated by App and iTunes syncs, and some of them won't be used long-term.
    The size used by Other on your iPhone largely depends on the App you currently installed on the phone. The more caches and temp files created by Apps, the more space consumed by Other. And of course, it may slow your iPhone down.
    Solution: it is hardly to put up with 2-3GB space taken by Other on iPhone, especially we even have no idea about what exactly it is. So to remove the Other, you can try to reclaim this space by doing a sync with iTunes; in other cases, you may have to go through a full backup and restore process.
    Because iTunes is terribly slow and troublesome on Windows PC (Best iTunes Alternatives ), and every time we sync our iPhone with iTunes will take lot of time. So, alternatively, you can use an iPhone Cleaner program to remove their Other files on your iPhone.
    PhoneClean is an iPhone, iPad, iPod touch cleaner application, which is dedicatedly designed to free up space on iPhone; clean App cache, cookies, and history; sweep off media temp files, etc.
    PhoneClean - iPhone Cleaner made for Free up Space on iPhone

  • Remove Partial Lock

    Background got partially locked; how do I remove the lock?

    The background is always partially locked. It doesn't prevent you from doing most things but if you need to  unlock it, double click the background layer in the layers panel to turn it into a regular layer.

  • MD04 - Deliveries not getting removed despite PGI

    MD04 does not refresh by deleting completed deliveries for which PGI is done. This happens only when some users are performing deliveries. What authorization objects are involved to compare the users?  We ran SDRQCR21 to clean it up. But we are looking for locating the real issue. This happens in ECC6 Ehp 4.

    Hello,
    I hanven't solution, but I am unterstand in this issue,
    I have 3 questions:
    1- What is the "Status overivew"  of the Goods movement for the delivery document
    2-  What is the movement type defined for the PGI (tab Goods Movement Data)? it  is 601
    3- What is the Delivery document Type ?
    Thanks
    Meher

  • STO - outbound delivery partially do PGI in warehouse

    Based on the STO, we are creating outbound delivery,  most of the outbound delivery has nearly more than  200 line items, out of 200,  nearly 120 line items TO created and  confirmed, now the user wants to save PGI for only  confirmed 120 line item, but system wouldn't allow us to confirm partial PGI, for these user have to delete the remaining 80 items  then only system allow to do the PGI.
    Is there any possibilities to save the outbound delivery partially, then for the next time when we open the same outbound delivery remaining unconfirmed line item have to show, and it allow us to save the remaining items.
    Thanks in advance
    regards
    Shivani

    Hi,
    Error message VL609 is designed to prevent PGI before picking was
    complete. If not, posting cannot be carried out unless you
    change delivery quantity. Partial postings are not possible!
    Function 'copy picked quantity as delivery quantity' could be used.
    To sum up, It is not be possible to goods issue a delivery that is not
    fully picked and for that reason error message VL 609 is issued.

  • PGI Concept?

    Hi,
    Does PGI creates any accounting document?
    Also I would like to know that PGI means that the delivery is complete and the goods are issued to the customer.Please suggest if my concept of PGI is correct?

    Owen Dun, senior SAP Specialist for Publicly Traded Corporations
    The complete concepts of PGI are provided as follows:
    PGI - Stands for “Post Goods Issue”. It is a significant phase in the Sales Order processing. In its simplest form, it is a confirmation of delivered quantity. PGI is the final step of the delivery/shipment processing; it is the stage where the ownership of the goods transfer to the customer and the stock is being updated. PGI transfers the ownership of the material to the customer; accordingly, your company’s Inventory reduces – it signifies the end of the delivery processes. At PGI, there is integration with Inventory Management by reducing the inventory stock quantity and the related Material document reflects the stock quantity update. Likewise, it also triggers integration with FICO by reducing the stock value and the Accounting document reflects the stock value update. There are some activities that will happen after the PGI of the delivery document of the Sales Order. They are:
    1. Reducing warehouse stock & updating inventory management.
    2. Posting the value change to the stock accounts in the inventory account.
    3. Reducing the delivery requirement.
    4. Updating the document flow and status of the preceding document.
    5. Creating work list for billing due list.
    During PGI, the stock status and accounting entry is passed into MM and FI modules for updating. The accounting entries are follows:
    Cost of goods sold …………DR. $ xx,xxx
            Inventory …………………….CR. $ xx,xxx
    Once PGI is performed, stock reduces from the companies stock and the delivery is completed. No longer have the goods remained as the property of the company, as soon as PGI is done.
    ***For Advanced SAP users:
    During PGI your inventory is getting reduced or shipped to the customer using movement type 601. When conducting PGI, these documents will be generated by the following t-codes:
    1. Material Document (MB03)
    2. Financial Document (FB03)
    3. Co Document (KSB61)
    One can create a delivery today and SAVE it WITHOUT doing PGI. Then, after a few days, one can go to VL02N & do the PGI. One can also do Partial PGIs under VL06. PGI can be reversed by using the t-code vl09n. One can create a Proforma Invoice from Delivery Document before PGI & then create actual Invoice after doing PGI. For Proforma Invoice before PGI, one can follow this path:
    IMG –> Sales and Distribution –> Billing –> Billing Documents –> Maintain Copying Control For Billing Documents –> Copying control: Delivery document to billing document.
    Here, select the Delivery & Billing Type & at Header Level in Copying requirements insert routine 11 – Head.dlv-rel.w/o GI. No other setting is required for Delivery to actual Invoice. Movement type is assigned to the schedule line of the line item & 601 movement type is used for PGI.
    Note: in the case of Inventory Consignment, in the stage of ‘fill up’ delivery, when you post goods issue via 631 movement, neither accounting document nor material document will be generated because you are just moving your stock from one place to another (from unrestricted to special stock). In the later stage where you generate ‘issue’ delivery via 633 movement, both the above documents will then be generated.
    In conclusion, PGI has the following effects on SAP:
    1. Billing Due list is updated.
    2. Inventory quantity / valuation are updated including material planning.
    3. LIS is updated.
    4. Updated the Document flow in Sales Documents.
    Hope that this document can provide you with some insights on how SAP's PGI works.
    Owen Dun, senior SAP Specialist for Publicly Traded Corporations

  • Dust & scratch removal

    Is there a function in A3 for dust & scratch removal - NOT doing it manually, but over the entire photo or selected area? Or, is there a plug-in available, such as the dust removal one for Photoshop?

    The problem with the PSE user interface is that it is a high-end painting/publishing/retouching tool (PS CS) with a complex menu & dialog box structure, upon which:
    * features have been removed wholesale (curves, scripting, etc.)
    * features have been removed partially (color management, etc.)
    * features have been added (Variations, Process Multiple Files) resulting in more menus, more modes
    * a completely independent application has been unceremoniously glued on (Organizer)
    It is, in a word, a MESS.
    As I've said before, the technology is great but the user interface is a disaster.
    Honestly, I would leave PSE alone and sell it as a "painting" application. Then I'd come out with a new product designed for photographers/snapshooters. I would:
    1. take a 'light' version of Apple's Aperture
    2. add selections/masking [the nondestructive, resizable, Ansel Adams Zone-based selections/masks in LightCraft's LightZone are very cool!)
    3. add simple layers (maybe even the tool-specific layers as in LightZone)
    4. and then do usability testing. You know, clicking on text shouldn't just select the layer, it should allow you to edit the text. Jeez, how difficult is that for a consumer program?
    [edit: corrected typo]

  • Hi i need help. :( how will I be able to locate and delete those update that were partially downloaded? thank you! :)

    hi i need help. how will I be able to locate and delete those updates that were partially downloaded? thank you!

    How to remove partially downloaded files in 10.6
    Hope this helps.

  • Pagination Issue: Removing White Space

    If you were asked the simple question: "How do I remove blank pages?" you would likely answer: "Format | Page Layout | Pagination | Before Saving & Printing: Delete Empty Pages."
    If you were asked a variation of that question: "How do I remove partially blank pages?" some might answer: "Huh?"
    That's my question. I have this tendency to assume that a vacuum of information on the search engines means, sadly in answer to this question, "You can't remove partially blank pages."
    Before you answer, here is what I'm specifically attempting to do with FrameMaker 9:
    1)   I converted a user manual in Word 2007 to FrameMaker 9. The TOC contains several hundred headings (seven levels deep). Of course, the TOC includes chapters (heading1) at level 1, and topics (heading3 through heading7) for levels 2-7.
    2)   I converted the text and graphics under each heading (heading1 through heading7) to separate FrameMaker 9 files. (Each heading and all child sub-headings are "topics" that describe part of the UI for a software product.)
    3)   All of the converted FrameMaker 9 files were added to a FrameMaker 9 book. The TOC in this book is identical to the TOC of the original Word 2007 file.
    Each of these headings is a separate FrameMaker 9 file representing a topic mapped to the UI:
    CONSOLE MAIN SCREEN....................................... 63
    Inventory Control..................................... 81
    Intellectual Property............................. 82
    Using the Intellectual Property Page......... 83
    Viewing and Configuring................ 85
    Configuring Filters.............. 87
    View Settings.............. 88
    4)   I have linked all these files to a project in RoboHelp 8, creating a RoboHelp master page to render the help topics with exact same headers/footers in the FrameMaker 9 file. Whenever I make changes to the FrameMaker 9 files, I can open RoboHelp 8 and compile a new help project for the UI. Sweet. (It works so well, as a matter of fact, that it’s worth the cost of the Adobe Technical Communications 2 suite!)
    5)   For customers demanding a PDF version that looks EXACTLY like the previous PDF rendered in Word 2007, I print a PDF file from the FrameMaker 9 book for this user manual that looks almost exactly like the legacy PDF file rendered in Word 2007.
    Why “almost” exactly?
    As you may have guessed, if a topic ends with a paragraph at the top of the last page, there is blank space for the remainder of that page. Whereas in Word 2007, the next heading began immediately after the previous heading!
    FrameMaker 9 only has a setting on the ‘Pagination’ dialog for eliminating blank pages, not eliminating partially blank pages.
    I would like to render the PDF file, printed from the FrameMaker 9 book file, with each file in the book beginning on the line immediately after the preceding paragraph of the file before it in the book (unless the style such as heading1 dictates the line starts on a new page).
    In some cases, the last page of a topic has just three sentences, leaving the rest of the page blank. It seems to me that to do what I’m attempting, the recursive effect of starting the next file after the paragraph on the last page of the previous file in the book, would be to reduce the PDF by several (or more) pages. This would require FrameMaker 9 to adjust the page numbering of the PDF file (which would no longer coincide with page numbering for the FrameMaker 9 book files).
    This is no different of a problem than anyone with a book that contains 10 files (each file representing an entire chapter) would face. If a chapter ends with a page containing just three sentences, one would have to fiddle with the text to get those three lines to “bump” to the previous page. In the old days of technical writing, this typical pagination flaw was a thorn in my side. I had to print the document, and if the end of a chapter contained “orphaned” text (or even a small paragraph on an otherwise blank page) I had to reduce paragraph spacing to cause that rogue paragraph to bump to the previous page, eliminating the white space. I was kind of hoping that after almost three decades of computing, that basic problem was solved. In a small book with a dozen or less chapters, it’s not a real issue, but now that I have a book with several hundred files, I’m facing this dilemma for the first time.
    Suggestions, anyone? (Thanks for your patience in torturing through this message!)
    Message was edited by: holosys
    Message was edited by: holosys

    Excellent ideas; Text Insets created through File Import eloquently solved the problem!
    I created a separate book that I will use for rendering the PDF file for the user manual. In that book are files for entire chapters. In each chapter file are text insets for each heading file (which comprises an individual "topic" in RoboHelp).
    Here is what I did:
    Opened the book file containing cover, hundreds of topics and TOC, and Save Book As... [new book name] then delete all book files except for the cover and TOC.
    After opening a new (blank portrait) FrameMaker 9 file, I applied all formats from my master stylesheet file.
    Selected File | Import | Highlight the file | [Path\Name.fm of sequentially first FrameMaker 9 file in chapter] (select Import by Reference radio button) | Import. (The Import Text Flow by Reference dialog screen appears.)
    Selected defaults (Body Page Flow: A (Main Flow) | Reformat Using Current Document's Catalogs | Automatic) and additionally selected Manual Page Breaks and Other Overrides (Under Reformat Using Current Document's Catalogs) then selected Import.
    Moved the cursor to the end of the file. (This is important because the cursor is now positioned BEFORE the imported Text Inset, and the cursor needs to be positioned AFTER the imported Text Inset.)
    Repeated above steps 3-5, selecting the file containing the next heading in the chapter, until the current file contains Text Insets for all topic files.
    Save the file.
    Add the file to the book as the first chapter.
    Repeated above steps 2-8 until the book is populated with all chapters.
    Update and print to PDF.
    Problem solved: I obtained the desired results as per my original message in this thread.
    The side question was asked as to why creating a separate FrameMaker 9 file for each heading and sub-heading (as described in my original message in this thread) is necessary. The answer is simply "budget" as the start-up company where I work wants to instantaneously generate a RoboHelp Flash Help project from the FrameMaker 9 book through linking FrameMaker 9 to RoboHelp 8, which is evidently a new function. Each heading and sub-heading of the user manual correlates to a UI screen or UI component. The User Manual was authored (before I arrived on the scene) with the intent of each heading and sub-heading in the User Manual TOC documenting a UI screen or UI component.
    Therefore, instead of spending time creating a RoboHelp project in parallel, the company desired the elimination of costs associated with parallel development. Since the budget is non-existent for online help, pressing Help on any UI screen displayed a boilerplate screen instructing the customer to call customer support at a toll-free number, and a link to the PDF manual. Now, with minimal effort, the Help buttons are mapped to open the help topic for the corresponding heading in the user manual. Pressing Help opens the appropriate heading or "topic" and displays a TOC and search tabs as well (for full access to the documentation). This scheme requires little or no ongoing maintenance in RoboHelp 8 other than opening the help project, updating the links to FrameMaker 9, compiling the help project in Flash Help, and checking the help files in to Perforce for the nightly build.
    Thank you once again for saving the day!
    Message was edited by: holosys

Maybe you are looking for

  • Ipad mini frozen after ios 8.3 update

    I tried to update my iPad to iOS 8.3 today and the first time it was updating on the actual settings so I could still use my iPad but then I lost internet connection and I tried to update it today and it went black with the apple logo and a bar measu

  • Excise problem in case of free items

    Hello, My user is having following issue. Vendor has sent 3 items, out of which one is free sample. But on that excise has to b paid by us (which is approx 3000rs). So when user is trying 2 do GR, first 2 items dont hav any problem, but after checkin

  • How to find the extraction method of a datasource?

    Hi, On a review of some documents on SDN, regarding how to track where data is coming from to BW, there was this helpful quote. “Just knowing what is the extraction method of a datasource and our search of the origins achieves a vast improvement!”  S

  • What is the link to download Adobe Reader 8?  I need to put it in an email

    I need to send a link out in an email for my readers to be able to download Reader 8.  Can you please send me the link that can be copied and pasted into my emails? Thanks

  • IOS 7 is a big mistake for me!

    I upgraded my 4s to ios7 the other day, now when ever my wife sends a text to me the text also goes back to here iphone 4.  I upgraded her iphone 4 to ios7 to see if that would fix the problem.  It didn't!  I also found that when I upgraded my 4s it