Remove plugins Final Cut Pro X

I've installed several trial plugins for Final Cut Pro X that I'd like to remove now. These include trial Effect/Transition plugins from companies such as Shefield Softworks, Nattress, SugarFx, PHYX, FxFactory Pro, etc. I moved the plugins from the Movies/Motion Templates/Effects (Transitions) folder to my Trash, emptied the Trash then rebooted by MacBook Pro. The plugins are gone when I check with Finder after restarting the computer. However, after I start Final Cut Pro X, the plugins all reappear in both FCP as well as in Finder. How do I remove these?
Thanks

wmskaggs wrote:
I've installed several trial plugins … after I start Final Cut Pro X, the plugins all reappear in both FCP as well as in Finder. How do I remove these?
you're probably using FxFactory
from noiseindustry
in your Apps-Folder, launch the app …
you're now entitled to switch-off and -on individual plug-ins.
(there are some free ones avail, as 'Pan and Zoom', a very handy Ken-Burns-like effect)
under 'Actions' you'll find the deinstaller
I may profit from this link

Similar Messages

How do use the hum remover in final cut pro 5? Help

How do use the hum remover in final cut pro 5? Help!!

Simply drop the effect onto the appropriate audio track. Set the frequency for the hum frequency (50Hz or 60Hz depending on your power supply). Include whichever harmonics you think might be present eg. 100, 150, 200Hz.
Note that I have generally had more success by using Soundtrack Pro's noise removal tool.
Trevor

How do you remove a final cut pro 7 license and re-enter it ?

I tried removing the FCP7 license to be able to re-enter it by removing the final cut file in this folder:
Library >Application Support> ProApps >Final Cut Studio System ID
but it didn't seem to work, is there a step I'm missing?
thanks in advance!

Trash you preferences and delete that file again. If it fails I would move all files out of the proapps folder to desktop, then boot FCP, authorise and re-drag in any files that are missing.
Also make sure to not have any ProApps (Logic FCP etc) running while you do this.

How do I remove Final Cut Pro X Addins/Effects?

I have some addins I want to remove from Final Cut Pro X. I no longer need/want them listed. I only want to see the default Effects. I dont need to know how to remove them from my projects, I want them off the computer all together.

dastoelk wrote:
Karsten! You beat me to the punch. I thought the SAME thing soon after I logged off.
although fxFactory was gracious enough to invite me to some free 'tests', I must admit, that this 'automatic reinstall after deletion' is a bit .... annoying? un-Mac-like? … I'm not customed to such behavior, at last.
the first time, I installed everything, then my effects-tab in FCPX was a bit crowded, used the steps you mentioned too - and, oh wonder, on next launch, everything back again!
... 'til I understood the 'plug-in installer & management'-function of fxFactory! <slapping own forehead>
on the other hand, every 3rd post here
http://www.fcp.co/forum/9-free-fcpx-plugins-and-templates
asks for 'how do you install plugins?"
so, it needs a better/convenient routine ....

Help Final Cut Pro 5 Won't Open

It seems to just quit when it gets to loading au plugins. It did this under 5.0 so i updated to 5.0.3 and same thing. Do i need to trash my au plugins could they be corrupt. I also tried a reinstall. It did nothing. I trashed all the plists and preferences. could i be missing anything?

Y'Know... I just did this same thing on a guy's G5...
Tried FCP Rescue... no go.
Went in manually and did the following:
In the Finder, go to ~/Library/Preferences (the tilde (~) represents your Home folder.)
Remove the "com.apple.finalcutpro.plist" file from the Preferences folder.
Remove the "Final Cut Pro User Data" folder from the Preferences folder.
BAM!!
It worked. Eye hope it works for ewe.
N

Final Cut Pro, doesn't launch after updating to 5.1.4.

Hello there,
I tried opening an older project with the version 5.1. but it only gave me an GENERAL ERROR 41. Then I downloaded the update to 5.1.4. and the application doesn't event want to launch anymore!!
What can I do, what else could've gone wrong. Before the update, I was able to open the program, but now not eve that! The logo jumps on the sidebar, the numbers start running on the opening screen, and then it turns it self off again. I already disconnected and reconnected my scratch disks, restarted the computer several time, etc...what else can I try!
HELP!!

Trash your preferences.
You can use a third party tool to do this, such as the venerable <a href="http"//fcprescue.andersholck.com">FCP Rescue or the more feature rich Preferences Manager ... both are free.
or you can do it yourself
excepted below:
Delete the User Preferences
You can resolve many issues by restoring Final Cut Pro back to its original settings. This will not impact your project files, but you should verify your Scratch Disk location setting after doing this. To reset your Final Cut Pro user preference settings to their original state, do the following:
In the Finder, go to ~/Library/Preferences—the tilde (~) represents your Home folder.
Remove the "com.apple.finalcutpro.plist" file from the Preferences folder.
Remove the "Final Cut Pro User Data" folder from the Preferences folder.

Installing/uninstalling Final Cut Pro X

I've download Final Cut Pro X from the App Store using a redemption code from a Multiuser license purchased by my employer (a university) and installed it on a lab Mac. How do I legitimately uninstall it and re-install it on another university Mac ?

DDid you follow Apple instruction how remove the trial ? Final Cut Pro X: How to remove the Final Cut Pro X Trial - Apple Support

Does Adobe CS4 Comes with manual books like Final Cut PRo?

Hi If I purchase CS4, does it come with a stack of manuals like Final Cut Pro?
If it doesn't is there a book that will teach me every little detail of each software of CS4?
Thanks
C

http://support.apple.com/kb/HT5127
Or here's the shopping list:
To remove the Final Cut Pro X Trial, follow the steps below for the version of Mac OS X that you are using.
Note: If you are purchasing Final Cut Pro X, you do not need to manually remove the Final Cut Pro X Trial.
OS X Mountain Lion
1. In Finder, choose Applications from the Go menu.
2. Locate the Final Cut Pro Trial application and drag it to the Trash.
3. In Finder, hold down the Option key and choose Library from the Go menu.
4. In the Library folder that opens, open the Application Support folder. Move the Final Cut Pro Trial folder and the Apple Qmaster folder to the Trash.
5. Return to the Library folder and open the Caches folder. Move the "com.apple.FinalCutTrial" folder to the Trash.
6. Return to the Library folder and open the Preferences folder. Move the following files to the Trash:
7.
8.     com.apple.FinalCutTrial.LSSharedFileList.plist
9.     com.apple.FinalCutTrial.LSSharedFileList.plist.lockfile
10.   com.apple.FinalCutTrial.plist
11.   com.apple.FinalCutTrial.plist.lockfile
12.
13.       Note: The .lockfile items may not be present on your system.

I need to remove a rig/wires from my final cut pro 7 project. Can Apple Motion 4 remove wires/rig? Are there any rig removal plugins for final cut pro? Thanks!

I need to remove a rig/wires from my final cut pro 7 project. Can Apple Motion 4 remove them? If not can anyone recomment any plugins for Final Cut Pro or Motion that can remove them. Thanks!!

In Motion 5 there is a plugin from CoreMelt called "SliceX" that does this. But I don't know anything in Motion 4 that will do it. You may get more help posting in the appropriate "Final Cut Studio" section of this forum.

HT5149 Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found. Reason why I have to reinstall is because I have repaired my Macbook Pro hard

Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps.
Reason why I have to reinstall is because I have repaired my Macbook Pro hard drive at a Mac Authorized Repair.
Short history of repair and my Final Cut Pro installation:
1. Macbook Pro stopped working, sendt it for repair. Had the Final Cut Pro installed,
2. Desided to try a MiniMac and recovered my backup with Time Machine, got the Final Cut Pro working.
3. Got my Macbook Pro back from repair, did backup on this one as well. But this time only the files not the Applications.
4. Removed the files as mentioned in HT5149. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found.
5. When I try to install Final Cut Pro from App Store, it downloads the application as planned. But after download it won´t show in the Application folder nor in the downloads folder, nor will it start an installation prosess. If I pause the installation in App Store, I can see the Final Cut Pro icon in my Dock. (But, as mentioned, after installation it won´t show neither here or in the Applications folder).
Any suggestions on what I should try now?
Thanks for any reply, I´m in deep water here...

Sounds like there is a file you're not getting. Never do a removal manually. It's so time consuming and a pain. There's a very easy and fast way to do this, safely, properly.
Get the free "Final Cut Remover" app from Digital Rebellion (dot com), use this to remove FCP X.
Reboot the Mac.
Download from scratch.
If you're not seeing FCP X in your app folder, run Disk Utility to Repair all drives.
If that doesn't help, try running Disk Warrior from Altsoft to repair the directories on all drives.

Plugin for Export Project to shake like in Final Cut Pro

Hi
Is there a plugin or a way to just move it from Final Cut Pro 6 that will let me export to shake from Final Cut Express Like in Final Cut Pro.
If i can just move it from Final Cut Pro plugin folder or something.
I have Final Cut Studio 2
my friend Has Final Cut Express And Shake 4.1

Ok so it does not change the quality of the video. And how does the send to shake work does it just add a link to the movie then when done in shake it exports to a new movie file with edits.
He decided
He will just open the movie that needs effects in Shake edit it Then export it. Then open the movie in Final Cut Express And put it all together. And Done
Thank you for you Help Tom.

Does Anyone know how to remove iPhoto from Final Cut Pro X.

I am trying to remove iPhoto from the Effects bar in Final Cut Pro X.

Perhaps you best ask that on the Final Cut Pro X forum here:
Final Cut Pro X

Is it possible to remove phone ring from piano recital video clip in Final Cut Pro?

Hi.
I edit all videos in Final Cut Pro. My last video clip is a piano recital. And there is a phone rining during biutiful piano performance. Anybody knows how to remove it without removing this part of music?

Looks like you're using FCPX so this is the wrong forum, pop over to the FCPX forum and ask there, although I think the answer will be, always keep phones on silent at piano recitals.
DM

Canon EOS MOVIE Plugin-E1 for Final Cut Pro Now Available...

There's been so much talk about the 5D, 7D, 550D on this board that I'm going to point to the EOS MOVIE Plugin-E1 for Final Cut Pro. This is supposed to speed to transcode of Canon Camera H.264 to FCP-friendly formats and let you add more metadata along the way.
Enjoy!
Canon webpage. Under Drivers & Downloads. Once you select your OS, "Mac OS X", the download should appear near the top of the "Software" list.
Note: (from Quickstart Guide)
This plug-in software allows you to convert MOV movies shot with an EOS Digital camera into ProRes files at high speed in the (Log & Transfer) window of Apple's Final Cut Pro.
FWIW: The quick start guide says cameras involved are 7D, 5D, 1D, no mention of 550D. Sort of odd.

For users in North America to make the Canon EOS REBEL T2i work (550D for Europe):
1. Install the new Canon EOS MOVIE Plugin-E1 for Final Cut Pro (http://www.usa.canon.com/consumer/co...nloadDetailAct)
2. Go to Library/Application Support/ProApps/MIO/RAD/Plugins/CanonE1.RADPLug/Contents/Resources/
2. Open up cameras.plist
3. After the 7D info add the following lines of code (keeping to the coding structure):
<key>T2i</key>
<array>
<string>Canon EOS REBEL T2i</string>
</array>
4. Save the text file. Close it. Everything should work now.
Cheerz.

Canon EOS Movie Plugin-E1 not recognized in Final Cut Pro 10.0.7

Canon EOS Movie Plugin-E1 not recognized in Final Cut Pro 10.0.7
I just installed the new version of final cut pro 10 and the canon plugin-E1 version 1.4 for the canon 5D mk III but after starting final cut pro I can not find the Log and transfer button., with the result I cannot import my files.
Is there a solution for this problem.

There is no L&T function in FCPX.
The import media dialogue window does what you want.
OS versions later than 10.6 should be fine importing Canon DSLRs.
Russ

Remove plugins Final Cut Pro X

Similar Messages

Maybe you are looking for