Remove Preloaded PSElements/Premiere Elements?

Just bought a new computer and could not reject the preloaded Photoshop Elements and Premiere Elements. I will install Lightroom 4 and CS6 Design Standard .
1. Do I need to remove both pre-loaded programs?
2. May I keep the Premiere Elements for the rare times I will need video editing functions that Design Standard lacks?
3. Should I just leave them alone and install Lightroom 4 and CS6 Design Standard?

I would just leave them alone. Even if they are removed, configuration data and registry entries will remain in place, so the effect would be zero in terms of keeping your system "pollution free". Other than that Elements programs do not interact with the pro programs in any way, so there's no harm.
Mylenium

Similar Messages

How do I remove the Adobe Premiere Elements Trail Version Sign from my video?

I'm making a video using the Adobe Premiere Elements, but they have a trail version logo across the screen so I cannot fully make a video without that showing. Is there any possible way that I can remove it? Thanks!

uggrrl
You cannot remove the Adobe watermark from an export of the Premiere Elements tryout, be it an export to file saved to the computer hard drive or a burn to disc.
But, you can remove the Adobe watermark from the Premiere Elements project file (known as the project.prel) after you purchase the program.
All you do is open the project file from the tryout in the purchase Premiere Elements and then....
a. In the opened project, go to Timeline Menu/and click on Delete Rendered Files
or
b. do nothing (some of us have found that the Adobe watermark automatically disappears from the tryout project file when that tryout project file in opened in the purchased Premiere Elements.
See which one works for you. The classical version of the how to is "a" above.
Looking forward to your results.
Thanks.
ATR

Premiere Elements 7 Crashing on Share DVD every time on Vista 32

I am running Premiere Elements 7 on Vista Home Premium 32 bit. The machinse is up to specs, quad core, 3GB RAM, Ge Force 9500GT etc. I'm in the US using NTSC. Drive C; has 127GB free and E:, also internal, has 73GB free. Both get defragged and they get cleaned with CCleaner etc.
I had not used PE7 in a while and I shot video of a birthday party at a go kart track on Canon HV-20. I imported the video, edited it, added quicktracks music and exported the result as DVD going to folder 4.7GB as per Appendix of Muvipix Guide. [note no crash when I did this] I then burned that TS_Video folder to a DVD but it didn't play on DVD player. So I came back to PE7 to try writing an actual DVD directly.
Whenever I click Share > DVD now I get an immediate crash of the program. Windows provides this info in that error box:
Problem signature:
   Problem Event Name:    APPCRASH
   Application Name:    Adobe Premiere Elements.exe
   Application Version:    7.0.0.0
   Application Timestamp:    48cee0db
   Fault Module Name:    StackHash_a34a
   Fault Module Version:    0.0.0.0
   Fault Module Timestamp:    00000000
   Exception Code:    c0000005
   Exception Offset:    00000000
   OS Version:    6.0.6002.2.2.0.768.3
   Locale ID:    1033
   Additional Information 1:    a34a
   Additional Information 2:    c9c5f4fd744690d388ab9d5b3eb051a7
   Additional Information 3:    cb2e
   Additional Information 4:    650bb5690556a17e911375b94d3e16f0
Read our privacy statement:
   http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
I had to go Task Managaer > Processes and end the APE7 process before I could launch the program again....but the I tried another project entirely, an older one that was shot on a Sony DV Cam and it caused the same crash.
I cleaned the temp files and registry, restarted....same thing. So I went to this document:
http://kb2.adobe.com/cps/404/kb404998.html#Before
...and started working through troubleshooting steps. I did this so far:
1. Make sure that the system meets the minimum requirements for Adobe Premiere Elements 7
check
2. Install the latest version of Premiere Elements.
checked, no updates available
3. Install current Windows service packs and other updates.
check, every single one is installed on this system. I run CS4 with PSCS4 Extended and Lightroom 2.5 all the time here.
4. Re-create the Premiere Elements PluginCache.
This I could not do. Holding Shift on starting APE7 had no effect. It just brings me to the Phosotshop Online signing screen on the elft with Open or Instant Movie on right etc.
5. Re-create the Premiere Elements preferences folders.
Could not find them at that location. Will come back to that as I have done complete reinstall of APE7 and deleted evrything I could find at that time.
6. Disconnect IEEE 1394 devices.
check, not a startup problem anyway
7. Troubleshoot third-party plug-ins.
Have not installed any
8. Run Premiere Elements in a new user account.
check, crashes same way
9. Run Premiere Elements while no other applications run in the background.
check, very limited set of apps running
10. Update the video card driver.
check, latest Nvidia GeFroce9500GT driver installed, also tried previous version, no effect
11. Verify that other device drivers are compatible with Windows.
check, devices were made for an work fine in Vista32
12. Troubleshoot QuickTime.
check (**PARTLY!**)...I have the latest QT Pro 7.6.4 and latest iTunes installed and working fine.
HOWEVER, I do have an issue in PSCS4 where I am not able to open QT Movies in Photoshop. The only response from Adobe's support ticket has been I should upgarde to QuickTime 7.1 or later...Duh, I have 7.6.4 and had said that in ticket. May be this is related?? May be it's a CODEC issue? I do have alot of CODECs on the machine that were set up by Zoomplayer's install center ioncluding latest DiVX etc.....but that should be OK I would think???
13. Check for codec problems.
See #12 above...do I disable every CODEC?? Not sure where to with that....?????
I did read this..."..If you are not certain which codecs should remain on your system, contact Adobe Technical Support for additional help.
To temporarily disable a video or audio codec, see "Temporarily disable a codec (Windows Vista)" (TechNote kb404892) for details....."
14. Identify the file that causes the problem.
Check, any do. Have a number of Elements projects, each of them causes the problem. Even creating a new project with two scenes in timeline and choosing Share > DVD will crash it now.
15. Remove and Reinstall Premiere Elements.
Check- ran uninstall, dleted all APE7 and APE4 folders I could find and ran CCleaner on temp files and regsitry.
RE-downloaded APE7 from Adobe Store and after a reboot installed it. Rebooted. Boom same crash.
16. Check for font problems.
Uh, I have only added three fonts to what's in the system...any others were installed by Adobe CS4 Design Premium...didn't spend any time on this.
17. Set the virtual memory paging file to the default size.
Have not tried this.
18. Optimize handling of temporary files by Windows
check
19. Repair and defragment hard disks.
check, do that regularly. Most of my content lives on a 4TB Drobo anyway, but all the APE7 edits have been with fast internal drive that is not fragmented and has lots of room. All scratch disks are set to E: internal SATA 7200 drive...Vista is on C:
20. Scan the system for viruses.
Absolutely clean. Running Norton360 and have run exhaustive checks and scans with help from the Tweaks guys including ESET online scanner- Absolutely clean of malware, spyware, trojans, viruses, rootkits or even tracking cookies!
21. Visit the Adobe User to User Forums.
Tada! Here I am.
22. Reinstall your capture card software.
No cpature problems....it's built in FW13945 on my HP Media Center m8120N and has always worked fine.
23. Contact Adobe Technical Support.
Awww man.....really?
Other stuff I have done and summary:
## I've read Steve say these kinds of problems are often Audio Driver problems. I have now installed latest Audio drivers from Realtek HD and Haupagge...latest are there and they work fine. Still crash.
## I've flashed both of my DVD writers drives, which are SATA, to latest Firmware and verified them.
Final note, I CAN share a file and choose to upload it to YouTube which is what I did with the Birthday video.
I have tried rendering the whole timeline before clicki9ng on Share > DVD still immediate crash. I *WAS* able to go there when I first edited this rememebr and I saved the DVD to a 4.7GB folder.
Thanks for any help!
Phil
pwscott   AT   gmail

Pwscott wrote:
10. Update the video card driver.
check, latest Nvidia GeFroce9500GT driver installed, also tried previous version, no effect
After installing recent nvidia drivers you should then uninstall the nvidia stereoscopic 3D driver from Control Panel> Uninstall a Program. This has a known conflict with APE.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Premiere elements 9 error [..\...SRC\EMS\WSEMSUTIL.CPP602]

Premiere elements 9.0 error
[..\...SRC\EMS\WSEMSUTIL.CPP602]
My computer came preloaded with premiere elements 9 and will not allow me to access the program.
I continue to get this error when I click on the shortcut. Basically the elements 9 will not work/open at all.

You'll want to post your question in the Premiere Elements forum:
http://forums.adobe.com/community/premiere_elements
Ken

Problems installing premiere elements 12

i bought a laptop with photoshop elements 12 and premiere elements. i installed photoshop but i cant install premiere elements. give me the steps to follow to install it pleaseeeee

loiklanglois
Let us try the following....
1. Run the free ccleaner (regular and registry parts)
CCleaner - PC Optimization and Cleaning - Free Download
2. Assure that antivirus and firewall(s) are disable for the following. Download and install the free tryout of Premiere Elements 12 from the following web site.
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
Be sure to carry out carefully the web site's "Note: Very Important Instructions" to avoid an Access Denied message.
a.. during the installation you can insert your purchased serial number into those installation files.
b. during installation use the default location on the Local Disk C for the program
Does that work, so that you see Adobe Premiere Elements 12 in Control Panel installed program as well as its
Adobe Premiere Elements.exe found under
Local Disc C
Program Files
Adobe
Adobe Premiere Elements 12
and in the Adobe Premiere Elements 12 Folder scroll down to Adobe Premiere Elements.exe to verify its existence there.
Miscellaneous
Please remove that Adobe Premiere Elements 12 Folder from
Local Disk C
Program Files
Adobe
before you start any of this.
To be explored later - if necessary.
they say "the file will be moved in C:\Program Files\Adobe\Adobe Premiere Elements 12"
i go to the file location and theres nothing. am i missing something or its just not working?
We will be watching for your progress.
Any questions or need clarification on any of the above, please do not hesitate to ask.
Thank you.
ATR

I have an HP laptop preloaded with Adobe Premiere Elements 10. For whatever reason Elements will "run" on click, but not even open the load screen or anything and then act like I never tried to open it? whats going on?

I bought my HP laptop in 2012, and it came preloaded with Adobe Premiere and Photoshop Elements 10
It worked fine and I even made a few video edits back in 2012 but for the last year Elements just REFUSES to work properly
I used to be able to open elements to at least the "what do you want to do?" screen
But now It won't even open this...I have no idea why...
If I double click the Elements application my computer slows down, bracing itself to load, and then ....thats it....it reverts to its normal speed and elements just doesn't open...
Any help would be great cause I feel like I've exhuasted all self-troubelshooting options and need to either get help from the forums or take the laptop in before I smash it in rage

thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements.

How to remove a timestamp with adobe premiere elements 8

How do I remove a time and date stamp on a video with adobe premiere elements 8.

If the camera burns in the date/time stamp, then there is not much that can be done.
If you need to eliminate that, then the best would be to apply the Effect>Motion>Scale, to enlarge the footage, until the date/time stamp is effectively cropped off by the Frame Size. You might want to look into Effect>Motion>Position, to "move" the date/time stamp closer to an edge.
The other method is tedious, and requires ideally Adobe AfterEffects. There, you could use the Clone Tool, to "paint out" the date/time stamp, if there is enough clean background to do so.
A variation on that method would be to Export/Share as a Filmstrip and Import that into Photoshop (if one had Photoshop Extended, there are other formats, that would work too), and then Frame by Frame, use the Clone Tool to remove that image.
Though not a way to remove it, you can also replace it with a Title, that occupies the area of the date/time stamp, and just cover it up.
If the camera allows you to turn that "feature" OFF, you would want to do so for newer footage.
Good luck, and sorry for the bad news.
Hunt

When uploading to Facebook how can I remove the "via Photoshop & Adobe Premiere Elements Uploader" ?

Hi everyone,
I am slowly getting to grips with Premiere Elements12.
When uploading to Facebook how can I remove the "via Photoshop & Adobe Premiere Elements Uploader" ?
I see there was an earlier posting (http://forums.adobe.com/message/3320214#3320214) which was for version 8, and I can understand the issue, but, (assuming its the same issue) has a remove tagline feature been installed??
Is this also the same in the Pro version?
Thanks in advance for any good info
Pete

Offul Duster
I do not know if Premiere Pro CS6 CC offers an upload to Facebook export. Strictly an Elements Windows person here.
The Premiere Pro Forum is a good place to ask about that.
http://forums.adobe.com/community/premiere
I do not have any Facebook accounts, so I cannot answer your specific Facebook question, but generalizing I can offer the following suggestions.
If your issue with Publish+Share/Computer/Social websites/Facebook is with tagging, you might want to check the Facebook web site for the Video Manager section of it (or that by some counterpart name). I know that YouTube at the YouTube web site allows the account holder to go into Video Manager and manage his/her tags for the file uploaded there and displaying. Have you been there and done that type of thing for your Facebook upload.
Please see
https://www.facebook.com/help/tag-suggestions
https://www.facebook.com/help/privacy/photos
Please review and then let us know the outcome.
Thank you.
ATR
Add On...As suggested in your inserted link, in Premiere Elements can you export to file saved to computer hard drive and then upload that file from there to Facebook at the Facebook web site without the tagging issue?

Newbe requests how to remove "applause" from Project in Premiere Elements 4?

This is the second time I attempted to make a large slide show using Photoshop Elements 9 and Premiere Elements 4 I am having two main problems:
1. I do not know how it got there but every time I run the slideshow on Premiere Elements I hear applause on each photo? Don't know how it got there either and frustrated how to get rid of it
2. When I move a photo to another place it leaves a blank space. I try to get rid of the space by going onto Edit and asking to delete and close gap. Sometimes it works and sometimes it does not. Then sometimes my only option is to remove the present photo and it does not remove it.
3. Lastly I wanted to change composing the slide show from Premiere Elements to Photoshop Elements 9 but the latter would not recognize the file.
THIS PROJECT IS A HUGE RUSH PROJECT FOR MY DAUGHTER'S 25TH ANNIVERSARY. TIME IS RUNNING OUT AND I AM PANICKING.
Thanks for your help.
Kathy

Kathy,
You say that you have PrE 4.0, but I did not see which version of PSE you have. You would need PSE 4.0, to be able to go directly to PrE from PSE. Otherwise, one would need to do, as you have, and Export from PSE as a WMV file, which would then be Imported into PrE.
The weakness in this latter method, the Export/Import, is that a WMV file is highly-compressed, so quality, when coming out of PrE will be compromised. Next, if one has the same versions of the two programs, and they Send to PrE from PSE, once in PrE, they can choose Break Apart, to get all of the elements in the SlideShow separated again - this cannot be donw with the WMV Export/Import.
Now, even with the WMV Export/Import method, one can still edit, but they are now cutting on a finished AV file, and things are not so easy - they are working on one large Video file, and one large Audio file on the Timeline.
For the blank spaces, one can just cut those out of the Video, but if the whole Clip (the WMV file) has Audio, that needs to stay, things are not quite so easy. In your case, however, it might be easiest to just Delete the Audio from the WMV, cut the Video to suit, and then Import the Audio Clips that were used in PSE, and just use those again, listening closely for the one(s) with the applause, and substitute something else, instead. This editing will be much, much easier in Timeline View Mode.
For that applause, it might be easier to go back to the Project in PSE, find where it is being introduced, and substitute for it there.
Now, if the applause comes during otherwise silent passeges, you can just cut it out, or can lower the Volume to the point that it is not heard. If it comes over music or dialog, there is nothing easy, that can be done. To remove it, and save the music, or dialog, will be virtually impossible and take much time, for probably little improvement.
Let us know just a little bit more about your Project and also the version number of PSE.
Good lukc,
Hunt

How do i remove the watermark created in Premiere Elements 12 now that I have full version?

I have upgraded to Premiere Elements 12 full version, but still have a watermark across the video I created in Trial version. I went into the "Timeline" menu ad delted rendered Files, as was recommended to me, but the watermark is still there. How do I remove this??

j.thomas.h
What computer operating system is your Premiere Elements 12 running on? Background information for now. Is it fully activated so that you are not getting Buy or Continue Tryout every time you open the program?
What are you trying to remove the Adobe watermark from - a project file (project.prel) from the tryout or an export from the tryout?
You cannot remove the Adobe watermark from an export from the tryout, be the export an export to a file saved to the computer hard drive or a burn to disc.
You should be able to remove the Adobe watermark from a project file (project.prel) created in the tryout by opening that project.prel in the purchased product and then the Timeline Menu/Delete Rendered Files. Some of us have found that just opening the tryout project file in the purchased product automatically removes the Adobe watermark.
Please give us more details on your situation.
Thank you.
ATR

How to remove red eye from you video with adobe premiere elements?

I would be greatful if someone could let me know how to remove red eye from a video, which I will be using for my acting reel. Thank you!

Ang.Fel
What version of Premiere Elements do you have and on what computer operating system is it running?
Do you have an integrated set of Photoshop Elements and Premiere Elements (such as 10/10, 11/11)?
How long is this person with the red eye viewed?
There are two possibilities that I can think of, but I would have to work it through with the actual footage and adapt accordingly.
1. Keying and color correction.
2. In Premiere Elements, do a freeze frame (in Freeze Frame dialog, Edit in Photoshop Elements after Insertion + Insert in Movie Option + adjustment of duration of the Freeze Frame bmp).
In Photoshop Elements, Red Eye Tool if possible or other color correction tool there.
How did you ever get red eye in video?
ATR

Manually remove Premiere Elements 11

I have a Windows 7 PC and Office 2007 Home Premium with Adobe CS6 and Premiere Elements installed. I recently upgraded to an SSD and Elements didn't take well to it. I wanted to uninstall it and then do a clean install onto the new SSD. When I try do remove it, though, I get a 1316 error message that "Adobe Premiere Elements.msi" is missing. Interestingly, I searched for this on both of my drives and couln't find it, then went to my mirror back-up from before the SSD install and couldn't find it there either!
It seems the best solution is to manually remove the folders and files, although I don't know what or where they are. I did find a list of PSE 8 files and folders, but was concerned about going back three revisions.
I would like a list of the files and folders used by Premiere Elements 11. Also, are all of the "Media, People, Places, Events", etc. in Elements safely saved with the photos? I definitely wouldn't want to loose all that information!

http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-11.html.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Premiere elements 10 downloads but will not open? info says to remove disc from desktop -- when i do that it closes the program?

premiere elements 10 downloads but will not open? info says to remove disc from desktop -- when i do that it closes the program?

Hi, Ken -
Since you have a new install of OSX, you may be missing Stuffit Expander, needed to expand downloads encrypted/archived in a Stuffit format. That problem confronted me with a new machine running OSX 10.6; a download and install of Stuffit Expander fixed it.
You can download Stuffit Expander from this webpage -
http://www.stuffit.com/mac-expander-download.html
Note - be sure to get the version that matches your OSX version.

Premiere Elements auto removing black frames?

I edited a file in Premiere Elements, inserting 15 frames of black at stratgegic points, and exported as Quicktime. I then ran the resulting file through a professional transcoder to convert to an MPEG-2 transport stream. When played back on an MPEG player (i.e., VLC) the .5 sec of black is where it's supposed to be, but if I reimport it back into Premiere Elements the black frames are mostly removed (2 out of 15 remain at each point). Why does it do this and how to prevent it? (I imported the MPEG back into Premiere to verify that there was no drift in the timeline caused by the export and transcoding process, since the black frames need to be synchronized with an ad inserter, but Premiere is removing the black frames.)

Did you Import the MPEG-2 Video? If so, it's most likely a GOP thing, when PrE internally converts to I-frame for editing. For a bit more background on GOP, see this ARTICLE.
I hope that is all that is happening and good luck,
Hunt

I've just upgrade to Premiere Elements 13. I found the Instant Movie option is not there anymore? is this feature removed?

I've just upgrade to Premiere Elements 13. I found the Instant Movie option is not there anymore? is this feature removed? Any one has an idea?

dchankk
It is there. In 13, look under Create in the Expert and Quick workspaces. And, once you update from 13 to 13.1 using an opened projects Help Menu/Update, you
will see an extra location for the feature - right in front of you in the main panel.
ATR Premiere Elements Troubleshooting: PE 13: Adobe Releases Premiere Elements 13.1 Update
Please let us know if you are OK with the above information.
Thank you.
ATR

Remove Preloaded PSElements/Premiere Elements?

Similar Messages

Maybe you are looking for