Remove profile from"Q" speed dial

Hi all
please excuse my lack of understating of forum etiquette but I am still trying to remove the profile change from the "Q" key. Following the normal process of attaching a contact to any other key (excluding "A" ,"Q" & "W" ) Doesn't seem to work. Failing that how can I attach two chosen profiles to the key.On another subject can you get the calander to be the home page on the Bold.
Thanks again all.
Damian

And you can move your Calendar icon > highlight or hover over it > Menu > Move and place it where you want it. If it is in a folder, move it over to the "up folder" icon.
If you want to move your Calendar icon to the main screen of your theme, move up to the top line of the icon screen.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Dialling from 7960 - speed dial works, manual dial fails

Hi, i've got an issue on a dialling a particular number from 7960 phones. When i dial a speed dial setup with the number 9121000 i hit the correct route pattern and the the 9 is stripped and an external call is placed to 121000 through my gateway.
if i dial 9121000 manually the call fails, and the 7960 display looks like its attempting to the 4 digit internal number 1210
I can't work out why this would work differently through speed dial and manual dial - any ideas?
thanks in advance for any hints

This is because you have overlapping pattern i.e. TP or RP, DN extension, etc with urgent priority set on it. Locate it and disable urgent priority.
HTH,
Chris

Cannot remove profile from iPhone post update

We have encountered a problem with configuration profiles installed using the IPCU prior to either the iOS upgrade to 5.1 or the matching update to the IPCU. The situation occurs when a configuration profile was installed with the removal setting set to 'Never'. Previously this meant the only way to remove the profile was with the IPCU i.e. not by the end user. Since the updates we can no longer remove these profiles either direct from the device or via the IPCU.
I have tried another profile installed before the update which had the removal setting at 'Always' and this also cannot be removed by the IPCU. However you can remove this direct from the device ok. If you then re-install the profile using the IPCU everything behaves as expected, you can add/remove as normal from device or IPCU.
Anyone else had this problem, or are we the first to come accross it?
We need these profiles to be locked and not removable by the end user, but this level of locking is impossible to work with. At the moment it means we have to rebuild each device just to change a configuration setting

Hey joe.russell,
Perfect, and thank you for the extra information. It could be that your iPhone is seeing all of your purchased music located on the cloud. Try turning off Show All Music from Settings and see if this affects what is showing on your device.
iTunes Match - iPhone
http://help.apple.com/iphone/7/#/iph6e2dfb83
Just show music that’s been downloaded from iCloud. Go to Settings > Music, then turn off Show All Music
Please let me know,
-Joe

Remove Profile from IPAD

Hi guys,
Trying to copy a SMIME certificate to my Ipad via USB I used Apple Configurator to create a profile. I can see the profile containing my private key but for some reason Mail doesn't recognise it. So I wanted to remove the profile again but this seems to be impossible. I can't see any 'remove'-button under Settings->General->Profile and I can't see any option in Apple Configuration to pull the profile off the device.
Restrictions on the IPAD is disabled. I have to IPAD connected to the same computer I used to install the profile (still via USB).
Any suggestions how I can delete this profile of my IPAD?
Thanks!
IOS 7.1.1
Os X 10.9.3
Apple Configurator 1.5

Thanks for your reply,
I did indeed use the same computer but I found the mistake just a few minutes ago. Somehow the option "allow removal of profile" was set to "never". After changing it to always and copying the profile over once more, I could remove the profile.
Thanks!

Removing profile from Webify me

I just filled in a Webify Me profile. I want to remove this profile

Mobile Me uses the IMAP protocol.
This allows the iPhone + Server + all other PC/Macs you have your account on to remain in sync. Delete an email, it affects all devices with account, read email, read on all devices with account. Etc. Etc.
This is normal for any IMAP based account. POP are the accounts that will not keep things up to date or the same.
By any chance are all the other accounts actually POP? or are they also using IMAP?
Typically you may find a default global settings in Settings - Mail, Contacts, Calenders - On that screen might be some deletion options.

Blackberry Z10 - Speed dial

The speed dial captions include only the first name and even when I change the sort command in the contacts by first or last name the captions are not affected which precludes from having speed dial for two contacts with the same first name. Is there a way to edit the caption of a speed dial?

Add a picture of that that contact!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Where is the speed dial list?

I want to change the speed dials on my Pearl 8120 but I'm having trouble finding the list. Here is what the manual says:
"Change the contact assigned to a speed dial key
1. In the phone, press the Menu key.
2. Click View Speed Dial List.
3. Click a contact or phone number.
4. Perform one of the following actions:
• To change the contact that is assigned to a speed dial key, click Edit. Click a new contact.
• To assign the contact to a different speed dial key, click Move. Roll the trackball to move the contact to the new speed dial key.
Click the trackball.
• To delete the contact from the speed dial list, click Delete."
The problem is, when I press "Menu", there's nothing even remotely like "View Speed Dial List." Anybody know where this is hidden?
Solved!
Go to Solution.

Press the GREEN dial key, then the MENU key which is the key just left of the trackball.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Speed dial tones

It appears that the AT&T 8820 has a software "feature" that the 8800 did not have. When speed dialing (like holding 1 for voicemail), the quickly dialed tones play out loud out of the speakers. I do not want this. RIM told me that it is by design. None of my 8800s do this, but all the 8820s I had on hand did it. When a user is in a meeting and wants to check voicemail, the last thing he/she needs is to have the speed dialed numbers played over the speaker of the BlackBerry.
RIM had no answers. Is there a way to suggest product enhancements to them that they might take seriously?
Thanks

Greetings, and welcome to the BlackBerry.com Support Forums.
k2p2socks wrote:
RIM had no answers. Is there a way to suggest product enhancements to them that they might take seriously?
Thanks
It sounds like they had a pretty firm answer for you, actually.
What OS on the 8820 are you running? On OS 4.5, you can set the BB to Quiet or Vibrate profile, and those speed dialing DTMF tones are silenced.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After updating to Firefox 16, all of the saved web sites in my speed dial tabs have been deleted. How do I get them back?

Firefox deleted all the sites from my speed dials when it updated

If you have a unencrypted boot hard drive and willing to buy another external powered drive and $100 software, the files can be recovered using this method and Data Rescue.
Create a data recovery/undelete external boot drive

Stop Profile From Sync'ing to iPod Touch

Hi All,
I have a question regarding permanently removing profiles from the iPod touch. I currently have an iPhone (which has a work related profile), but I use the same computer to sync my iPod touch. For some reason the work profile syncs onto the iPod touch even though the work application is not sync'd to the iPod. In addition, I manually have removed the profile from the Mobile Applications sub directory.
I also deleted the profile from from the iPod, but every time the iPod is sync'd the profile shows back how. How do I delete this permanently?
Thanks.

It was actually loaded by an application from work. I think the profile is called a "Provisioning Profile" (not Configuration Profile). It is definitely loaded as part of the application, but I have removed the application and deleted the backup and sync histories...
No use, it still shows up after a sync. There is got to be something hidden...
Thanks.

5800 - cannot speed dial and dial from handsfree c...

I verified the following behaviour of the new 5800 which seems to me to be a bug, because it works on other nokia series 60 phones:
Because I synchronize my phonebook with MS Outlook, phone numbers have the syntax "+43 (1) 9876543". These phonebook entries can be dialed without problems when I call using the phonebook.
But if I use the speed dialing feature (press and hold e.g. key "2" ), I get the message "Nicht gestattet" (German, means "not allowed" ), and the number is not dialed. If I delete the spaces and the brackets, dialing is possible without problems.
The same behaviour can be seen if I try to dial from my built in handsfree set in my car with numbers as described above.
Before the 5800 I used a E65 and a 6120c, there the syntax described above worked without problems.
Software: v11.0.008.red.01
Any clues?
Best regards,
Thomas
Message Edited by tez1 on 04-Feb-2009 11:52 AM

magpie68 wrote:
FIX...
I got this, I found out it happened when the number has spaces in it.
Try cleansing the number of all spaces and punctuation (and prefix with +country code)
This works for me.
Alan
Sorry, this is no fix, this is a workaround. It is clear, that this will avoid the problems. But PIMs like MS Outlook create phone numbers in this format; after synchronization with my phone, there are spaces in all of the phone numbers. Therefore I suggest, Nokia implements this like for all other S60v3 phones. This would be the only fix. Regards, Thomas.

How to remove Seperator from check-in and profile check in pages

How to remove Seperator from check-in and profile check in pages
The seperator is included on the checkin pages, which is present in the std_page with name "std_namevalue_separator", this is called by td_document_checkin_fields and std_document_file_fields.
Defination of include:
<@dynamichtml std_namevalue_separator@>
<$if not isUploadFieldScript$>
<tr>
<td width="<$captionFieldWidth$>"><hr /></td>
<td width="<$captionEntryWidth$>"><hr /></td>
</tr>
<$endif$>
<@end@>
I have to remove the following include from some of the profile check in page.
Please suggest if anyone have some idea, how to proceed.
Thanks,
Sumit

791848 wrote:I have to remove the following include from some of the profile check in page.The key here is that you want to do this in some profiles, not all profiles or globally, if I'm reading this right.
Without writing a component, you can put this code in the "side effects" box in the desired profile(s). This code removes the horizontal rule, and inserts a non breaking space in its place.
<$setResourceInclude("std_namevalue_separator","<$if not isUploadFieldScript$>
<tr>
<td width=\"<$captionFieldWidth$>\"> </td>
<td width=\"<$captionEntryWidth$>\"> </td>
</tr>
<$endif$>")$>YMMV. The non-breaking space may get stripped out in the forum.

Removing fields from function profiles

Hi
Some one please help me in removing fields from a function profile. PFA for your reference
Regards,
Prem

Hello Prem,
Can you check the HTML-coding of the view? What is the name of the view? I could also check it in my system, even as we are not using this specific view. My other thought was, that it is a button, then you could remove it from the internal table GT_BUTTON of the IMPL-class of the view, but after rethinking I think it might be in the HTML-coding.
Best regards,
Thomas Wagner

Remove fields from OrgChart extended employee profile

Hello experts,
I would like to remove two fields from the Extended Employee Profile from all Herarchies: "Address" and "Place of birth".
I reviewed the Details Designer from the AdminConsole but I see they are part of a data sheet so I guess it is not as easy as untick them to be removed. Any guidelines where I can deleted them from the details panel?
OrgChart 3.0 SP2
Build 0702019400
Any assistance would be helpful.
Regards,
Ana

Hi Ana,
Try ..\AppResources\detaildataconfiguration\SAPPositionIncumbentsInfoDetailsConfig_Data.xml - there is a fieldset called EmployeeDetailData that contains the fields.
Best regards,
Luke

How do I set up speed dial? My contacts ported over from my old phone, but the speed dial settings are gone. I find nothing in the phone or in the manuals on how to set up speed dial.

How do I set up speed dial? My contacts ported over from my old phone, but the speed dial settings are gone. I find nothing in the manual or online about speed dial.

BToddP, I completely understand wanting to customize your phone the way you once had it on your old phone. Fear no longer, help has arrived! Please review this link for additional assistance: http://spr.ly/6588AEzw Let us know if you need any further assistance. Thanks!
KristieQ_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Remove profile from"Q" speed dial

Similar Messages

Maybe you are looking for