Remove registration information MacOs Tiger

Hi there,
perhaps this shouldn't be the place to ask for this, but I
think it's incredible that telephonic support from Adobe Spain is
not giving me answers for this problem.
I've registered a Flex Builder 3 Trial using a bought Flex
Builder 3 Standard license, but it was an error, because we've also
bought a Flex Builder 3 Profiessional license that was the one to
be used.
The problem, now I can't change from the standard to the
professional version, because we've not bought an update from
standard to pro, but 2 updates from Flex 2 to flex 3 (one to
standard, by error, and one to pro, the one we want).
Uninstalling Flex Builder is not enought, because when we
install it again, it keeps the registration info from the Flex
Builder 3 standard. Anyone knows how to remove this registration
info, to license Flex Builder with the Professional license????
Thanks in advance ,
Marc

Thanks.  I thought of that.  But won't I get whammied for registration again?  I just registered this at adobe last month after rebuilding a crashed system.  In other words, will Adobe know that I've uninstalled it, and therefore have an available license?  Thanks for the welcome.  I've been a Studio premium user for 3 years, and now that my product is no longer supported....I need support!
Thanks.

Similar Messages

  • Remove Registration Information as part of Restore Process

    The HP registration remains after a full operating system recovery from the restore partition.  How can this personal information be removed?  The computer is to be donated to charity. 

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Re-installing for a User whose Registration Information is Unknown

    I've just sold my ibook G4 on ebay. I want to erase and install for the new user, whose personal information and desired "short name" is unknown to me.
    How do I erase and install and bypass the set-up assistant (which includes a mandatory registration information) that appears before the installation process?
    Thanks for any light shed on this question!

    Joelius:
    Welcome to Apple Discussions.
    Here are a couple of procedures posted by Kappy that should accomplish what you want done:
    This is the simple method and doesn't involve erasing the hard drive.
    Boot from your OS X Installer. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Next, boot to single user mode. Restart the computer and after the chime press and hold down the COMMAND-S keys until the computer starts up to a black screen with white type.
    3. At the prompt, type the following commands, each command followed by the Return key:
    /sbin/fsck -yf
    mount -uw /
    rm /private/var/db/.AppleSetupDone
    shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when you reboot, it will send you through the Startup Wizard.
    This is the long method:
    Follow these instructions step by step to prepare a Mac for sale:
    First, back up the data:
    1) Shut down all Virtual PCs. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    2) Clone to an external drive using Carbon Copy Cloner.
    Next, prepare the machine for the new buyer:
    3) Deauthorize the computer in iTunes! Deauthorize both iTunes and Audible accounts.
    4) Remove Open Firmware passwords
    5) Turn the brightness full up and volume nearly so.
    Install a fresh OS:
    6) Insert the OS X install CD/DVD.
    7) Restart the computer while holding down the C key to boot from the CD/DVD.
    8) Run Disk Utility from the file menu and erase the internal hard drive (optionally zero all data).
    9) Install OS X.
    10) Reboot the computer.
    11) From the welcome screen, you can skip the registration step by typing command-Q.
    12) When prompted, create an account (it will be an admin account).
    13) From your new admin account, configure networking.
    14) Then use Software Update to bring your system and all of it's applications up to date.
    15) From Disk Utility, repair permissions on the new volume.
    Now delete the account you just created:
    16) Boot from a different volume (e.g. a firewire drive, if available)
    17) Clean up the image using the following terminal commands:
    prompt> rm /Volumes/<imagevol>/var/db/BootCache.playlist
    prompt> rm /Volumes/<imagevol>/var/db/volinfo.database
    prompt> rm -r /Volumes/<imagevol>/var/vm/swap*
    18) Now you can get rid of the admin account you used to set up the machine Use the terminal:
    prompt> nicl -raw /Volumes/<imagevol>/var/db/netinfo/local.nidb -delete /users/<admin>
    prompt> rm -r /Volumes/<imagevol>/Users/<admin>
    prompt> rm /Volumes/<imagevol>/var/db/.AppleSetupDone
    19) Shut down and ship it to your buyer. When they get it, it will boot to the Welcome screen just like a factory Mac, except that it's better because it's completely up to date.
    With acknowledgements to Kappy
    Good luck.
    cornelius

  • Why am I having to re-enter my registration information each time I open the application?

    Hi All,
    I purchased Apeture with my Macbook three years ago and have just recently decided to utilize it. EVERY time I open the program I'm prompted to enter my registration information. I'm entering the info each time, but would love not to! (I registered the product in an attempt to make the dialog box go away to no avail.) Any ideas?

    First of all, are you using an administrator account, when you are entering the serial number? Aperture needs to write the information to the system library, not the user library. Try to log in from an admin account while entering the serial number. If that does not help,  you may have a corrupted "ProAppSystemID" file or Aperture cannot write to the System Library.
    First check, if you still have an old file "ProAppSystemID" in your System Library.
    Quit Aperture.
    Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
    Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
    Reenter your serial number, hopefully for the last time.
    Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
    Use the Finder's "Go" menu
         Go > Got to folder    and  enter /tmp into the textfield. If you see the file there, move it to its proper location.
    Check the permission on the folder "Library", then "Application Support", then "ProApps". You (as admin) need to have read/write access to all flders along the path.
    Regards
    Léonie

  • Getting error like "Error in portal_sso_redirect: missing application registration information" while trying to run application using Oracle SSO

    Hi All,
    I am trying to implement SSO authentication for my APEX application. I have registered the application as a SSO partner application.
    I have set the authentication scheme to Oracle Application server Single Sign On.
    When i run the application i am getting the below error.
    Error in portal_sso_redirect: missing application registration information: p_partner_app_name:g_listener_token:HTML_DB:ofss220104.in.oracle.com:5050Please register this application as described in the installation guide.
    Please help me to resolve this.
    Thanks and Regards,
    Suhas

    Suhas,
    After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
    Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
    Ricker

  • Error in portal_sso_redirect missing application registration information:

    Hi,
    I am getting the following error message, when i run any of my APEX Page. Please help me to resolve this issue.
    Error in portal_sso_redirect missing application registration information:
    p_partner_app_name:g_listerner_token:HTML_DB:stbp5.oracle.com:80
    please register this application as described in the installation guide.
    What is the issue? What is the fix for that?
    Regards
    Balaji S

    Suhas,
    After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
    Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
    Ricker

  • I removed registration of a product on one Apple ID, and am trying to register under another.  After removing product from profile, I log into the other account and try to add.  It says it's already registered.  How do I get all products on one ID?

    Does anyone know how to consolidate all products that I own under one Apple ID?  I have removed registration, but when I try to re-register the SN, it says it's already associated to another Apple ID.

    Your best bet would be to try resetting the password to the account that you would like to use via iForgot
    Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
    After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account.

  • Error "Registration information is invalid" when you start Premiere Elements 7 (Windows)

    Issue
    When you start Adobe Premiere Elements 7 for the first time, Premiere Elements returns the error message "Registration information is invalid. Please reinstall Adobe Premiere Elements."
    Solution
    Do one of the following solutions:
    Solution 1: Install Premiere Elements 7 using the Premiere Elements 7 serial number.
    If you purchased Premiere Elements bundled with Photoshop Elements, you may have used the Photoshop Elements serial number included in the pack to install Premiere Elements. Uninstall Premiere Elements and reinstall Premiere Elements using the Premiere Elements serial number.
    Note: The Premiere Elements serial number starts with the number set 1143. The Photoshop Elements serial number starts with the number set 1057.
    Solution 2: Use a Company Name with 40 single-byte characters or fewer, or 20 double-byte characters or fewer.
    When installing Premiere Elements, you are asked to provide a user name, a company name, and a serial number. While the company name field is not a required field for installation, if you choose to enter data, do not enter a name that contains more than 40 single-byte characters or more than 20 double-byte characters.
    Note: A single-byte character is any character in the standard ASCII character set. English language characters are all single-byte characters. Double-byte character code uses two bytes to represent one character. The double-byte character set was developed for the Japanese, Chinese, and Korean characters sets. Many extended ASCII characters are also double-byte.
    Solution 3: Install Premiere Elements to a location that does not contain extended ASCII characters in the file path.
    Do not install Premiere Elements to a location that uses extended ASCII characters in the file path. Extended ASCII characters include characters such as , –, ›, †, ‡, ‘, Ÿ.
    Note: The default installation path for Adobe Premiere Elements does not contain extended ASCII characters.

    Thanks.  I thought of that.  But won't I get whammied for registration again?  I just registered this at adobe last month after rebuilding a crashed system.  In other words, will Adobe know that I've uninstalled it, and therefore have an available license?  Thanks for the welcome.  I've been a Studio premium user for 3 years, and now that my product is no longer supported....I need support!
    Thanks.

  • How to disable 'Remove Hidden Information' popup when closing PDF in Acrobat X on Mac?

    How do I disable the function that causes the 'Remove Hidden Information' popup when closing PDFs in Acrobat X? I'm using OS X 10.9.4 on a Mac?
    I've searched online and was directed to Preferences>>Security (enhanced) to uncheck 'Unable Enhanced Security', but it wasn't checked.
    This box (see screen shot) opens each time I close a PDF. I'm forced to select an option before closing.
    Please help.
    Thanks.

    Go to the menu Acrobat>Preferences
    In the Preferences window's "Categories" pane, select "Document"
    In the "Hidden Information" section deselect both check boxes
    Click the OK button
    You should be good now.

  • Homesite keeps asking for registration information

    I have been using Homesite 5.5 for several years.  I was using it successfully in Windows 7, 64 bit.  I recently upgraded my desktop to Windows 8, 64 bit, and when I went to use Homesite for the first time since the upgrade, it asked for my registration information, including serial number, as if it hadn't been registered.  After I entered it, it asked for the serial number of the program I had upgraded from, which I also entered.  It then brought up the registration screen again, followed by the previous serial number screen, etc.  After going through this three or four times, I was finally able to get into the program, but after I closed the program and tried to open it again, the same thing happened.  Even though I have Dreamweaver (and the entire CS 5 Design Premium suite), I prefer to use Homesite, and want to find out how to get it functional again.  I assume this is something to do with the registry, but have no idea how to fix it.  Any suggestions would be appreciated.

    Hey Folks, I think I have found a solution - even if I cannot prove if it can be reproduced on any other machine:
    After having the same Problem I tried several workarounds - and suddenly one crazy idea I had worked out:
    Run Homesite under "compatibility mode"***
    Enter registration information
    Homesite will run - but most of the menu bars won't appear. Don't mind: compatibility mode was only necessary once to remember the registration information...
    Close Homesite and switch back to normal mode
    Homesite will start and stop asking for registration info...
    This worked well on my Windows 8.1 Pro 64 Bit System - I hope, it works well with all your Systems too! Homesite is such a perfect simple editor and I'd badly miss it if it would not run on my system...
    *** For compatibility mode:
    Open the Homesite program folder in Explorer and look for Homesite.exe
    Right click on homesite.exe --> properties
    Select "compatibilty mode"*
    * I am using a German Windows and am not quite sure, if "compatibility mode" is the correct translation into English. If not, look for something similar...
    Good luck to all of you Homesite-Lovers!

  • Remove Hidden Information tool

    Hi,
    I would have a question regarding Acrobat's 'Remove Hidden Information' tool. Under Tools, Protection there is the 'Remove Hidden Information' tool. When I click it the results can be seen on the left side. Under 'Comments and markups' the sum of objects can be seen. I figured out that it detects bookmarks, links (internal, external) and objects described here: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7e7f.w .html.
    But it also detects some other objects as well which I am not aware of (based on the number of objects detected). I also know that it counts 2 objects when using 'Replace text' from the link above.
    Does anybody happen to know what additional types of objects does this tool detects and how to search for them in the document?
    Thanks for your help,
    Csanad
    I use Acrobat version 10.1.5

    The hidden text is the collection of glyphs on the PDF page that use text rendering mode 3 (no stroke, no fill). 
    Any links placed in association with such hidden text are not "hidden" (that is not how it works with PDF Link annotations - see ISO 32000-1:2008). 
    Any Link annotation placed in a PDF are the same as any other Link annotation (with the exception, of course, of whatever the link's Action happens to be).
    So, no special sauce for links that were placed in association with now removed "hidden text".  
    In context of what you've written it may be that you will have to select - Ctrl+click the Link annotations of interest then tap the Delete key. 
    Be well...

  • Supplier Registration Information

    Hi Everybody,
    I have couple of questions on supplier registration. We are implementing ROS on SRM 5:
    1. Is the supplier registration information searchable? In other words can I write a report to get all suppliers who have registered themselves for certain categories? If the information is not searchable how can I make the information searchable?
    2. Is it possible to use Supplier Registration to gather quality & certification information periodically? Let's say i have 100 suppliers who initially registered in ROS. I send out detailed questionaire that also captures quality and certification information. After a year I want to check with these suppliers if quality and certification information they submitted are still valid?
    3. If bullet#2 is possible, is it possible to extend the functionality in bullet#2 to vendors that have been created in the R3 system (without having these vendors to first register themselves first).
    4. Can bullet#3 be automated (i.e depending on when the supplier registered every year I would like to send out the quality and certifications automatically)?
    Any help you can provide will be highly appreciated.
    Thanks
    Venkat

    Ramki -
    Thanks for your quick response. Want clarification on your point#1:
    - The information in BUPA (that can be viewed through BP txn) is only generic in nature. Where can we see what categories the vendor signed up for or certifications the vendor says he has that were provided in the surveys?
    Appreicate your help.
    Thanks
    Venkat

  • File sizes explodes after removing hidden information

    After removing hidden content in Acrobat Pro X (Tools/remove hidden content or Tools/sanitize) the file size increases, up to 10x (2 MB -> 20 MB). Save as optimized PDF only partly reduces the problem, file is still 3-4x the initial size. Document was created with Adobe PDF writer, but this problem occurs in principle also with other PDFs. Bug? Necessary? Workaround? Any help is appreciated. Thanks in advance!

    Any one found a solution to this problem?
    I'm having it too, acrobat xi pro 11.0.10...
    Original file size before cropping ~27MB
    Same file saved as optimized PDF before cropping ~12MB
    Original file size after cropping ~27MB
    Same file saved as optimized PDF after cropping ~12MB
    Original file saved as some other file name after removing hidden information ~60MB
    Same file saved as optimized PDF after cropping AND after removing hidden information ~60MB
    What on earth is going on?

  • Satellite A505 - How can I retrieve the registration information

    I purchased a Toshiba A505 in March 2010. At this time I registered the product with Toshiba. This laptop has been stolen. How can I retrieve the registration information. Unfortunately I do not have the serial or product number.
    Thank you.

    Hi
    You should get in contact with Toshiba using the Stolen Units interface.
    http://eu.computers.toshiba-europe.com/innovation/generic/STOLEN_UNITS_SUPPORT
    Here you should go to point: *DEREGISTER*
    Hope I could help you.
    Greets

  • Remove UWL information areas under preview

    Hi UWL Experts
    I need to remove some of the information which is shown when a preview of a workflow item is displayed like “Attachments” and “You can also – links”.
    This part is easily fulfilled by use of the ivew parameters; but is this possible to customize on work item level instead? Because I only need to remove these information from some of the items and not all?
    Thanks in advance
    Cheers
    John

    Hi Kai
    Thanks for the input, we have some tasks form the backend which is actually does not contain attachments but are displayed in the portal as attachments.
    I have looked into the standard uwl.webflow configuration and found an item called “uwl.task.webflow” is guess that this is the one which the rest of my tasks receive the standard configuration from; if I want to create a new set of settings for some specific tasks then I need to copy this ad add a new prefix like “costumized.webflow” and add this prefix to the specific task that I want to change?
    From this configuration I can see that it is possible to remove links from the “you can also” section, but is it also possible to remove informations from the details display of items as well (in the same way as it can be controlled globally from iview parameters)?
    Thanks in advance
    Cheers
    John

Maybe you are looking for