Remove / replace yellow tooltip "only positive integers allowed" in Infopath 2013 and SharePoint online forms

Hello,
Is there any way to remove or rename the yellow message showing when hovering over the control for a lookup list column in a Infopath 2013 web form?
It is very annoying for users and not even helpful.
Thanks!
Laura

Hi Laura,
According to your description, my understanding is that the error occurred on the lookup column in InfoPath web form.
I recommend to check the properties of the lookup field in InfoPath.
If the settings are the same as the first picture below, please click Xpath behind the Value to change d:Title to d:ID like the second picture.
If above cannot work, I recommend to delete the lookup column in the list and create a new column in single line of text type, then edit the list form in InfoPath following the steps below:
Add the list where you get the value for the lookup field to the InfoPath form as an external data source.
Right click the newly created field, click Change Control and select Drop-Down List Box.
Right click the newly created field, click Drop-Down List Box Properties, then select Get choices from an external data source.
Set the properties referring to the second picture above(select the list added as an external data source in step1 in Data Source).
Here are some similar threads for you to take a look:
http://social.technet.microsoft.com/Forums/en-US/0726d17f-a478-4e4e-a23a-d8fe4cb6dd86/only-positive-integers-allowed-infopath-form-2010sharepoint-list?forum=sharepointcustomizationprevious
http://social.technet.microsoft.com/Forums/en-US/a4d4b160-82fc-4817-998a-252073499e27/infopath-form-return-field?forum=sharepointcustomizationprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

Allow collaboration on un-published / checked-in project on Project Server 2013 and Project Online

Hi All,
Before a project is officially published specific resources in the project team need to be able to "collaborate" i.e. create tasks, change dates, etc. before the project is published. The complication is that we need this collaboration to happen
on un-published / checked-in versions of the schedule. For example, the primary Project Manager adds tasks and makes changes to a published version of the schedule, saves and checks-in the project (doesn't publish), tells a secondary PM to go in and review
the changes, the secondary PM should be able to see the changes the primary PM made, even though the schedule changes weren't published, be able to check-out the schedule, review what the primary PM did, make some more changes, save and check-in the schedule
(again, without publishing it), and tell the primary PM to review. Then the primary PM could go, check-out the schedule, review it, save it, publish it, and check it in.
Can Project Server 2013 or Project Online allow to do this? I looked into permissions and Server settings but I couldn't find anything that would indicate it is possible.
Any help will be greatly appreciated!
George

Hi George,
If you perform some tests, you'll see that even from PWA, the schedule can only be edited from the draft table. When you access the schedule in read only (as a team member for example), you see the published version, but as soon as you edit it (after clicking
on the edit button assuming you have the appropriate permission), you'll open and update the draft version of the project.
As far as I can remember (I don't have it in front of me now), you have a "line" in the schedule PDP (don't know how to call it in english) that will tell you if you are accessing either the draft or the publish version.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Date Controls in repeating table of Infopath 2013 only showing Calendar in first row date controls

I am using SharePoint 2013 and InfoPath 2013.
and using form library which uploaded at server.
I am using repeating table over section . and place Date Controls.
At the run time it is showing first row with START and END
date controls.
when I click INSERT Item it is showing second row with
Date Controls.
It is opening and showing calendar only on first row.
But when I click Date Control button at second row it is not showing or opening calendar.
Yesterday it was working. but today is not working at site.
Although it is working on InfoPath 2013 Preview.

Hi John,
Based on your description, my understanding is that the Date Control cannot work correctly in the InfoPath form.
I recommend to re-publish the form to SharePoint and then compare the results.
Please go to the Library setting page of the library where the form is published > click Advanced Settings > click Edit Template in the Document Template > now the form will be opened in InfoPath Designer and then click Quick Publish button in the
top of the menu tab.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

INFOPATH: Only Integers allowed validation tooltip

I have a few lookup columns in an InfoPath library form template. The underlying fields are integer numbers, and the control is a dropdown which is populated from a secondary data connection. If the field is mandatory, a little validation tooltip reminds
you "Only integers allowed". My users will be confused by such information. Is there a way to overwrite this message or at least switch it off? Thanks. Iko

Any luck in solving this issue?
Ok, this workaround helped me forward. Uncheck the option "Cannot be blank" on the drop down list. Instead, if you need validation and the field is mandatory, create a validation rule on the InfoPath control. its the same function, with a more meaningful message
that you can customize.
Hope it helps..

Capital inv. program position not allowed for measure

Hi Gurus,
When I am going to assign top level wbs to investment program position i am getting the error message
How I can overcome this.
Quick response will be rewarded and appreciated.
Cap. investment program position not allowed for measure
Message no. AP039
Diagnosis
You want to assign a measure or appropriation request to an investment program position. However, the program position does not allow this type of assignment.
System Response
The assignment is not allowed.
Procedure
Use the detail display in the position to find out what assignments are allowed to it.
rgds

HI Sree
In im12 I have one general Tab and one Organisational tab.Here I am not getting allowed measures button.
even though I am unable to create AR when i am assigning WBSE there then I am getting the error message.
Program type not allowed according to budget profile of measure
Message no. AP177
Diagnosis
You tried to assign a measure to an appropriation request.
The appropriation request type for the appropriation request specifies that assignment from measures is only possible, if the measures specify that they have to be assigned later to an investment program with program type ZM01.
However, the budget profile of the measure specifies that it has to be assigned later to an investment program with program type ZC01.
System Response
The function cannot be carried out.
Regards

Only Positive amount in Infotype 0015

Dear Gurus,
I want users to enter only positive amount for wage types in Additional Payment.....
No negative amount should be allowed for particular wage types in Additional Payment
Can anyone help me out ?
Regards
Srijit R Menon

Hi,
For this you need to define the minimum amount in the WT characteristics for such WTs. Go to table/view V_T511, select the WT and put the minimum amount value in amount block as 0.01.
This way no one can enter value which is less than 0.01 i.e. negative amount can not be entered.
Hope this helps.
VK

I bought a new iMac. iWeb and all folders migrated over, no problem, but I cannot bring up my website - it only seems to allow for creating a new site.

I bought a new iMac. iWeb and all its folders migrated over, no problem, but I cannot bring up my website - it only seems to allow for creating a new site.

You need the 'Domain' file in which iWeb keeps its data. This lives by default in (user)/Library/Application Support/iWeb. You need to locate it on the old machine and copy it to the same position in the new machine. Note that it is the Library folder in your Home folder, not the one at root level.
This folder is hidden on Lion and above; to access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice. In Mavericks you can make it permanently visible - open your Home Folder the from the Finder's View menu, choose show View Options and check Show User Library.

How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the Ipad to the Iphone and not the other way around.

How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.

The devices are not designed for transfer of that kind. Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.

Allow mov type 261 and 262 for a material type only

Requirement is to allow movt type 261 and 262 for a particular material type.( Assume Only 261 - 262 issue transactions happen against that material type.)
User to be restricted, while material issue (migo), for the material type XXXX to 261 - 262 movt type only.
No any other movt type allowed for this material type while issuing material.
All suggestions welcomed.
Regards,
Rakesh

Thanx amit.
But same user uses all other movt types for other material type also.

REST API: Create Deployment throwing error BadRequest (The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.)

Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
            fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
            createDeployment.Add(xName);
            createDeployment.Add(xPackageUrl);
            createDeployment.Add(xLabel);
            createDeployment.Add(xConfiguration);
            createDeployment.Add(xStartDeployment);
            createDeployment.Add(xTreatWarningsAsError);
            requestBody.Add(createDeployment);
            requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
                uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
            responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
            request.Method = method;
            request.Headers.Add("x-ms-Version", version);
            request.ClientCertificates.Add(certificate);
            request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
                        requestStream, System.Text.UTF8Encoding.UTF8))
                        requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
                response = (HttpWebResponse)ex.Response;
try
                statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
                        responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
                    requestId = response.Headers["x-ms-request-id"];
finally
                response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
                    uri.ToString(),
Environment.NewLine,
                    (int)statusCode,
                    statusCode,
                    responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
Shubhendu

Please find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G

More than one schedule line when 'Only complete delibery allowed'

Hi guys!!
I need your help to solve a problem with the shipping of our sales orders. We have a customer which has been set with 'C' 'Only complete delibery allowed' in the field 'partial delibery per item', but if a sales order is blocked because credit limit has been exceeded and we try to release the order, the system automatically set several schedule lines in the schedule lines tab of the sales order. I know afterwards the system will not allow us to delibery the order unless we ship the whole line, but Is there any way to avoid the system set more than one schedule line?
Thanks in advance for your answers

Hi
How many schedules are created. Normally if the system couldn't confirm the stock on the Requested Delivery date, then it will create one schedule line with zero quantity for that requested del date. Since it is a complete delivery, it should have only one more schedule line. If you have only two schedule lines, then it is working fine. If not, pl check the sales order whether that complete delivery is determined or not.
Thanks,
Ravi

I'm running10.8.5. I have tried to install a programme but can't because it is from an unidentified developer. the box says-Your security preferences allow installation of only apps from the Mac App Store and identified developers.how do i install the pro

i'm running10.8.5. I have tried to install a programme but can't because it is from an unidentified developer. the box says-Your security preferences allow installation of only apps from the Mac App Store and identified developers.how do i install the programme

macjack gave you the easiest solution. Need to have admin privilieges to change this option.

Display only positive values for a particular Keyfigure

Hi..
(Sorry, I accidentally posted this also in Datawarehousing forum, actually it related to BeX forum).
For a particular column(keyfigure) in my report, the user wants to display only positive values.
I used the formula from the one of the forums
(Keyfig > 0)* Keyfig.
This displays only positive values in the column as required. But, the result for this column is also affected. As the result is negative, it shows, zero in the result for this column.
Is there a way in which the result will not be affected by the formula?
I went into the properties of the particular keyfigure and chose Calculate Result as -> Summation.
It throws out the following error message
'Calculating result as...' was not executed
Message no. BRAIN141
Diagnosis
The function 'Calculate Results as ...' could not be used in all
instances.
The recalculation of a result cell always occurs based on the set of
detailed cells subordinated to this cell. This is the most detailed
level of the drilldown. Therefore it is not posible to recalculate in
hierarchical lists. The calculation of a results cell is not performed
if a cell or column with an expand symbol is assigned beneath it.
Otherwise the newly calculated result is changed every time one of its
lower-level nodes is expanded. This is not supported for technical
reasons and would also only confuse users.
Note, however, that calculating with "Suppress Results" is always
executed because the restriction described above does not apply in this
case.
NOTE:
The query shows the keyfigure values for a selected title, for profit center and territory hierarchies.
Any suggestions would be greatly appreciated.
Thanks,
Sai.

Hi Deepu,
Thanks for the reply. I tried with ur formula.
LEAF(keyfig) gives all values "zero" for that particular column including the result.
NOT LEAF(keyfig) gives all values "one" for that particular column including the result.
So, ur formula gives the same values as of the present column values.
I tried condition, but it's not working...it says the following errors...
There is a condit. on Title, results row suppress. active on Profit Center
(conditional
Message no. BRAIN144
Diagnosis
Characteristic Title has an output condition and the 'Suppress Results
    Cells' property is active for Profit Center. This generally leads to an
    incomprehensible output list.
System response
As soon as an output condition is defined for a characteristic (here
    Title), the system calculates the corresponding result cells and applies
    the output condition. If a result cell of this type is later deleted by
    the condition, all the lower-level detail and result cells in its
    drilldown are suppressed. Because the result cell is suppressed the
    Title rows are then omitted from Profit Center.
In extreme cases this can lead to an entirely empty list being
     displayed, although the single rows or columns would be displayed if the
     condition were deactivated.
Procedure
Check the query settings, especially results row suppression and the
     output conditions.
Procedure for System Administration
You can deactivate this message Brain 144 with transaction RSRT1.
There is a condit. on Profit Center, results row suppress. active on
Territory as in SPL (conditional
Message no. BRAIN144
Diagnosis
Characteristic Profit Center has an output condition and the 'Suppress
    Results Cells' property is active for Territory as in SPL. This
    generally leads to an incomprehensible output list.
System response
As soon as an output condition is defined for a characteristic (here
    Profit Center), the system calculates the corresponding result cells and
    applies the output condition. If a result cell of this type is later
    deleted by the condition, all the lower-level detail and result cells in
    its drilldown are suppressed. Because the result cell is suppressed the
    Profit Center rows are then omitted from Territory as in SPL.
In extreme cases this can lead to an entirely empty list being
     displayed, although the single rows or columns would be displayed if the
     condition were deactivated.
Procedure
Check the query settings, especially results row suppression and the
     output conditions.
Procedure for System Administration
You can deactivate this message Brain 144 with transaction RSRT1.
Thank you very much.
Regards,
Sai.

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo.

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo. Is it possible to simply delete this blue color of the sky?

Make your selection and then use Refine Edge.
See this video tutorial from Bob Gager.
https://www.youtube.com/watch?v=xrl3Qwg6zSc

I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature. It now only allows me three options and the style I have been using for the last year is not

I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature. It now only allows me three options and the style I have been using for the last year is not there. How do I add additional options and get my preferred signature style back?

Hi Amanda ,
Which version of Acrobat are you using?
Which signature style are you talking about?
You can go ahead and try uninstalling and reinstalling it and see if that works for you .
Use the cleaner tool to uninstall it .Here is the link.
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
You can refer to the following link to re install it .
https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards
Sukrit Dhingra

Remove / replace yellow tooltip "only positive integers allowed" in Infopath 2013 and SharePoint online forms

Similar Messages

Maybe you are looking for