Remove report from MyInfoView?

(I'm not sure this is the right forum, but I'm sure I'll be pointed in the right direction).
Scenario: Add a report to MyInfoView and click "Save". How do I remove that report?
We're running XIr2 SP4 on Windows-based servers & desktops.

Click 'Edit', choose any of the other available templates (number of panes). You'll get a warning along the lines of "Changing layout will overwrite any changes you have made. Are you sure you want to continue?". Click OK and Save.
As long as you don't define content again, there will be no report (or any other data) in My Infoview. As Amr pointed out, you can revert to the default by selecting the 'Single Pane' template.

Similar Messages

MSS 60.1.20: My Staff - Reporting: Trying to remove reports from tree list

I am trying to remove (or I should say HIDE rather than remove) several of the SAP provided reports from the selection tree in the <b>MSS business package 60.1.20</b>. I checked the par file, and it appears that it relies on a function module, <b>HRWPC_RPT_FCODES_READ</b> which in turn calls <b>RH_MWB_FCODES_READ</b>, to build the tree structure based on function codes with scenario MSS0. I checked the IMG, and did not see any way of "hiding" these report/function codes through configuration. I assume I can delete the entries, but I do not want to do that. I would like to hide them. I noticed in the function module, that it refers to a hidden SAP structure <b>HRUSMWBFCH</b> that will exclude codes from the report tree.
<b>Can anyone tell me how I should be hiding reports from the report tree?</b>

I think I may have found the answer. In the IMG, you can go to Personnel Management -> Manager's Desktop -> Enhancement of Function Codes -> Define Structure of Function codes -> Change Arrangement of Function Codes.
From here enter the scenario, higher level function code, and level number in the table. Be sure to check the box "function code hidden" to hide the item from the list.
I had done this before, but the change did not appear within the portal. I had to actually refresh my browser cache by logging off and back on to the portal in order to see the changes.

Remove Reports from MSS

Hello,
I am working with the SAP MSS Business Package on the Portal. We have a functional requirement to remove all the "Time Management" reports that show up under the 'Reports' tab for the MSS role. I looked at the Reports iView and there is no option for me to select the reports that should/should not be shown on the portal.
How can I prevent some of the reports from being displayed on the Portal?
Thanks you for all the help...
Guy

Hi James,
Try doing this
Go to Personnel Management -> Manager's Desktop -> Enhancement of Function Codes -> Define Structure of Function codes -> Change Arrangement of Function Codes.
From here enter the scenario, higher level function code, and level number in the table. Be sure to check the box "function code hidden" to hide the item from the list.
also check link
MSS Reporting iview (remove certain reports)
Thanks N Regards
Santosh
Reward if helpful !!!

Removing Report from launchpad

I'm trying to remove a report from the MSS Launchpad and I'm not seeing exactly how to do it. I'm not sure if that is done from the backend through SPRO, or if I can just hide it via the portal from content administration. We are on ECC6 and ERP2005 I believe.
Thanks.

Ok, with help locating the right documentation area, this problem is solved. For anyone else who is having trouble with this, I went to:
IMG: Integration with Other MySAP.com Components --> Business Packages / Functional Packages --> Manager Self-Service (mySAP ERP) --> Reporting --> Set Up LaunchPad
From here (transaction: FPB_LP_MSS_REP_CUST) I simply removed the line that corresponded to the report I wanted to remove from the LaunchPad.
Thanks for the responses.

How to remove the a report from Transport

Hi Have CR in transport and the CR contains many reports.
a) If i want to remove one report from that, plese tell wht are the steps do i need to follow.
b) if i want to remove entire transport request,Plese tell how to remove the transport
c) also give me steps if i want to remove the entire CR from the transport.
thanks in advance
d) also please give me steps to release it to Quality.
Thanks in advance.
kp

Hello KP,
a) If i want to remove one report from that, plese tell wht are the steps do i need to follow.
Go to SE09
Find out the TR where u have added the report.
Select the report and click delete button. A Popup will apprear for confirmation.Press YES.
b) if i want to remove entire transport request,Plese tell how to remove the transport
Then remove all objects from the TR and Delete the TR.
Please reward points if it helps.
Vasanth

How to remove dimension from report

Dear All,
I have created a report using Drag and Drop option as explained in the following link with 2 dimensions in rows and 1 dimension in column. Now I would like to remove one of the dimension from existing report. As explained in the below link I could not able to see the option called Remove Dim from design mode as well as preview mode.
http://help.sap.com/saphelp_bpc70/helpdata/en/32/5facaf79c14163b3ae976733d4ae65/content.htm
SAP Help: To remove a dimension, right-click on the dimension name block and select Remove Dim. You can remove dimensions only when more that one exists on either your columns or rows.
Please, can anybody shed some light on this issue.
thanks in advance..
regards,
Raju

Dear Pravin,
Thanks for the reply.
I have tried this drag and drop option. But the problem with this option is existing format is getting disturbed and some junk values appearing in place of removed dimension.
thanks and regards,
Raju

Remove hashmarks from report

Is it possible to remove hashmarks from reports? Users want to have empty space in empty cell, but not the "#" sign.
I did not find any settings etc. to remove hashmarks, I even tried to replace initial value by space in update rules, but Analyzer is clever enough to recognize spaces and replace them by the "#" too. This is really terrible.
VB script does not fit in that case as users use Web Analyzer reports.
Does any solution exist on that problem?
Edited by: Gleb Kuzmin on Feb 6, 2009 2:17 PM

Check this link out
replacing '#'-sign for 'not assigned' in queries
Setting in TCode RSCUSTV4 would take out the # across all reports in BI, if thats what you want.

Removing commas from report result

Hello gurus,
Is there a way to remove commas from data values in the BEx reports?
I used NODIM() to remove $ signs and units. We need to remove the commas as well.
Thank you,
Malli

hi,
in query properities you should have option to show unit on the top of column only and in key figure properities should be option to choose how many decimal spaces you want to be visible on report (this option you have in rsa1 -> infoobjects -> your key figure -> BEx reporting tab)
Regards,
Andrzej

Removed Records: PivotTable report from /xl/pivotTables/pivotTable1.xml part (PivotTable view)

I keep getting an error in Excel 2013 when using PowerPivot. Can someone please explain to me what this error means? I can't see that there is anything wrong with the underlying data, and the list of "removed data" is empty too...
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<recoveryLog xmlns="http://schemas.openxmlformats.org/spreadsheetml/2006/main"><logFileName>error085600_01.xml</logFileName><summary>Errors were detected in file 'E:\SkyDrive\Documents\Forex\Greenzone_Stats\Greenzone_2013_v2.xlsx'</summary><removedRecords summary="Following is a list of removed records:"><removedRecord>Removed Records: PivotTable report from /xl/pivotTables/pivotTable1.xml part (PivotTable view)</removedRecord></removedRecords></recoveryLog>
TIA!
Dennis

Turns out it's a resource limitation in Excels chart rendering engine. If I filter the data model so that less rows are included in the PivotChart, the error goes away.
Re
Dennis

Remove a report from CUCM Cisco Unified Reporting

Hello,
I did a Unified CM Cluster Overview report in CUCM 8.6 (a cluster with 2 nodes, replication is good) but it took a long time. So I stopped the process.
But when I enter the Unified CM Cluster Overview in Unified Reporting, it shows that generated report. And when I click it, it shows
"ERROR : Fatal error encountered while validating report XML with schema".
My question is : How can I delete a report from Cisco Unified Reporting ?
I searched in Cisco Unified Reporting Administration Guide and I didn't found a way to do it.
EDIT : Well the report was being generated, and the report can finally be displayed. But the question remains open. How can I delete this report ?
Thank you for your answers.

Hi Mohamed,
Generate a new report, it will overwrite the old one. There is no option to delete it from cucm admin page. If you are concerned about the time it took to generate the report the first time then restart the Database Layer Monitor and Tomcat services before running a fresh report. Tomcat needs to be restarted from CLI of the Pub ( utils service restart Cisco Tomcat ), it is case sensitive.
HTH
Manish

Not able to edit the report from BO 5.1

Hi,
User has Business Objects 5.1 version on his machine and he is able to login to Business Objects 5.1.2 and can also open the BO reports from the required path
When he edit the report, the BO is gettng hung and following errors occured one by one when he clicks ok button
error1: "you must close this universe(name of universe) before importing it"
when he clicks OK button on this error, second error is received
error2: "Some obsolete objects have been removed from the query. (QP0027)"
When he clicks OK button on this error, third error is received
error3:"A connection required to refresh this document is unavailable(DA0004)"
I am not understanding why these three errors are receiving one by one.Please tell me how to resolve above errors and edit the report
kind Regards,
Srinivas

Hi Denis,
Normally,what we do is once we provide access to webi users group for each user from BO supervisor module, user(s) will able to refresh/edit the existing report from Full client BO.His colleagues have had no problem editing all his reports from their machines but he is not able to edit any report from his machine and BO is getting freeze.
He also reinstalled BO and cleaned out everything on his Computer and re-built it but the issue is not yet resolved
Can you please tell me how to resolve this issue
Kind Regards,
Srinivas

CR2008 Not enough memory while exporting reports from Crystal Reports 2008

I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
Server details:
OS: Windows 2003 Enterprise Edition R2 with SP2
IIS: IIS 6
.Net Framework: 3.5
Application details:
Hosted application using Crystal Reports 2008 SP 3
Crystal Reports Viewer version: 12.0.2000.0
The data binding of the report object is done through an ADODB dataset.
Web.Config:
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<configSections>
    <sectionGroup name="businessObjects">
      <sectionGroup name="crystalReports">
        <section name="printControl" type="System.Configuration.NameValueSectionHandler" />
        <section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
      </sectionGroup>
    </sectionGroup>
</configSections>
<businessObjects>
    <crystalReports>
      <printControl>
        <add key="url" value="http://myserver/mysite/PrintControl.cab" />
      </printControl>
      <crystalReportViewer>
        <add key="documentView" value="weblayout" />
      </crystalReportViewer>
    </crystalReports>
</businessObjects>
<appSettings>
    <add key="CrystalImageCleaner-AutoStart" value="true" />
    <add key="CrystalImageCleaner-Sleep" value="60000" />
    <add key="CrystalImageCleaner-Age" value="120000" />
</appSettings>
<system.web>
    <httpHandlers>
      <add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
    </httpHandlers>
    <compilation debug="false">
      <assemblies>
        <add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
        <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
      </assemblies>
</system.web>
<system.webServer>
     <handlers>
         <add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
     </handlers>
</system.webServer>
</configuration>
Sample Code:
Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
Report.Load(Server.MapPath(strReportPath));
Report.SetDataSource(dsReport);
Creportviewer.ReportSource = Report;
For exporting the report to PDF
string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
Clean Up Code: (Page_UnLoad event)
if (Report != null)
     Report.Close();
     Report.Dispose();
Creportviewer.ReportSource = null;
Creportviewer.Dispose();
dsReport = null;
GC.Collect();
GC.WaitForPendingFinalizers();
Can someone help me resolve the issue.

The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM

Calling a JSP Report From HTML parameter form

Hi,
I m trying to run a JSP Report from a HTML parameter Form. The JSP reports requires a parameter named userid in the URL with a valid value for database connection.
eg. URL "http://win2kdb.oracle9iis.com:7778/repdemo/examples/Tools/fm_crdinf.jsp?userid=sysapps/system@trt1". We have created a variable on the server named "parmformjsp" with a value "sysapps/system@trt1". Now i use this variable in the URL as follows, eg. "http://win2kdb.oracle9iis.com:7778/repdemo/examples/Tools/fm_crdinf.jsp?parmformjsp".
When i use this URL to call another JSP report from a JSP report it works fine, but the same does not work when calling a JSP report from a HTML form.
the code for HTML parameter form calling a report is as follows,
<html>
<head>
<meta http-equiv="Content-Language" content="en-us">
<meta name="GENERATOR" content="Microsoft FrontPage 5.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>Parameter Form</title>
</head>
<body>
<p>Parameter Form</p>
<form name="form1" method="GET"
action="http://win2kdb.oracle9iis.com:7778/repdemo/examples/Tools/fm_custrns.jsp?parmformjsp">
<p>From Date<input type="text" name="p_fmdate" size="20"></p>
<p>To Date<input type="text" name="p_todate" size="20"></p>
<p> </p>
<p><input type="submit" ><input type="reset" value="Reset" name="B2"></p>
</form>
<p> </p>
</body>
</html>
If i create an input parameter named "userid" with a valid database connection value, remove the ?parmformjsp part from the action URL then it works fine. How can i call the JSP report using the parmformjsp variable name instead of using the "userid" clause in the URL.Can anyone suggest any workaround....
Thanks & Best Regards,
Unmesh

do it like this...
DECLARE
pl_id ParamList := Get_Parameter_List('tmpdata');
BEGIN
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id, 'ROUTE_CARD_CONTROL', TEXT_PARAMETER, :ROUTE_CARD.ROUTE_CARD_CONTROL);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
Run_Product(REPORTS, 'D:\STL_FINAL\CHPREPORTS_FINAL\ROUTE_CARD.REP', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL);
END; what exactly happens when you call the report. if its showing the blank page... may be you are not passing the right parameter name. cross-check that your parameter name in the report is 'ROUTE_CARD_CONTROL'.

Application hangs while running a report from Forms

Hi all,
I am getting a problem regarding running reports from Oracle forms application for printing in a shared printer at client system. There is no problem when I set the DESTYPE to HTMLCSS or FILE. But when I set it to PRINTER then the application hangs and report server gets busy. Once this problem occurs other reports from other client systems are not generating even if this is a HTMLCSS or FILE type.
The thing is the application has ran successfully for two months. Suddenly from last few days the problem is arising.
Few things that I have noticed:
1) When the application hangs I cheked the Task manager, where the process rwlpr.exe is running. If I manually ends the process there the application comes back with a message 'unable to run report'.
2) I have checked few log files, where I have found few log files whose names end with a job number. The file generates from a succesfully running report shows few steps tht end s with closing the printer. But the file that is generated from an unsuccessfull job stops at the step 'Opening Printer //<machine name>/<printer share name>'.
3) Then finally I have changed the DESTYPE to file and using the HOST command printing the text file to shared printer in dos mode. Its working fine. But often the first problem arises again.
What are the possible resons that may cause this problem.
Looking for your positive response.
Thanks and regards
Sandy

From dos prompt I have used the type commad.
From server machine in dos prompt I have used,
type d:\rep.txt > \\<client machine name>\<printer shared name that is connected to client printer>
from Server machine I have opened a Notepad doc, File >Print >Selected the printer that is in client machine.
This works fine.
Now my code to print a report directly to printer,
V_PRINTERNAME := '\\mmondal\mmondalprn'; -- shared Printer name at Client machine
repid := find_report_object('REP_BANK_MST');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,V_PRINTERNAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'kt30');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no P_ISPOSTED='||:CHK_ISPOSTED);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=kt30','_blank');
ELSE
message('Error when running report');
END IF;
exception when others then
     message(to_char(sqlcode));
This hngs the application. And other requests enqued in job queue does not process. If I cancel the stucked job then other reports complete sucessfully.
Log - rwserver.trc shows the following:
[2011/6/14 4:48:28:437] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 1051
[2011/6/14 4:48:28:484] Debug 50103 (RWCacheItem:addFile): add file 'mmondalprn65558177.txt' for job 1051
[2011/6/14 4:48:28:484] Debug 50103 (RWCache:updateCurrentCapacity): Current cache capacity is 32948731
[2011/6/14 4:48:30:671] Exception 50157 (): Error while sending file to printer \\mmondal\mmondalprn. Exit with error code 1848
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:756)
     at oracle.reports.utility.SOSD.sendPrinter(SOSD.java:128)
     at oracle.reports.server.DesPrint.sendFile(DesPrint.java:102)
     at oracle.reports.server.Destination.send(Destination.java:484)
     at oracle.reports.server.JobObject.distribute(JobObject.java:1582)
     at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2231)
     at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:134)
     at oracle.reports.server._EngineCommImplBase._invoke(_EngineCommImplBase.java:94)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:671] State 56016 (JobManager:updateJobStatus): Job 1051 status is: Executed successfully but there were some errors when distribute the output
REP-50159: Executed successfully but there were some errors when distribute the output
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:notifyWaitingJobs): Master job 1051 notify its duplicated jobs.
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 1051
[2011/6/14 4:48:30:671] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 1
[2011/6/14 4:48:30:671] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Ready
[2011/6/14 4:48:30:671] Exception 50159 (): Executed successfully but there were some errors when distribute the output
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1009)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1779)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:1045)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1280)
     at oracle.reports.server._ConnectionImplBase._invoke(_ConnectionImplBase.java:401)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:runJobInEngine): Encounted exception in job 1051
[2011/6/14 4:48:30:671] Debug 50103 (ConnectionImpl:runJob): jobid = 1051 Failed with exceptionoracle.reports.RWException: IDL:oracle/reports/RWException:1.0
[2011/6/14 4:48:30:671] Exception 50159 (): Executed successfully but there were some errors when distribute the output
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1009)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1779)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:1045)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1280)
     at oracle.reports.server._ConnectionImplBase._invoke(_ConnectionImplBase.java:401)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:703] Info 56013 (ConnectionManager:release): Connection 196 is released
[2011/6/14 4:48:30:703] Info 56013 (ConnectionManager:release): Connection 197 is released
[2011/6/14 4:48:31:31] Debug 50103 (JobManager:removeJob): will remove job 51
[2011/6/14 4:48:31:31] Debug 50103 (RWCache:deleteItem): delete item for job 51
[2011/6/14 4:48:31:31] Debug 50103 (RWCacheItem:clear): job 51 become invalid
[2011/6/14 4:48:31:31] Debug 50103 (RWCache:updateCurrentCapacity): Current cache capacity is 32942484
[2011/6/14 4:48:31:46] Debug 50103 (JobManager:removeJob): removed job 51
[2011/6/14 4:48:47:906] Info 56013 (ConnectionManager:release): Connection 198 is released
[2011/6/14 4:48:51:890] Info 56013 (ConnectionManager:release): Connection 199 is released
[2011/6/14 4:50:48:437] Info 56013 (ConnectionManager:release): Connection 200 is released
Most of the time when all the instances are restarted then for the first time it runs successfully.
The above code worked fine for Last two months.

How can I remove GRUB2 from my iMac?

Hello Internet!
I have a 21.5" iMac (intel based, version 10.7.5), and I have recently tried to install Ubuntu on it.
Ubuntu installed successfully, and with it came GRUB2. Now, when Ubuntu started doing all sorts of wierd crap i decided i might as well just use it from a LiveCD or LiveUSB and remove it from my system. So i deleted all the partitions (including SWAP).
I have managed to remove the SWAP partition which is parcticularily tricky, by erasing and reformatting it to a Mac OS Extended (Journaled) format, and then simply removing it from the disk utility.
Now, I have installed rEFIt, and when booting my computer I see two options in my rEFIt - on the left I see a "EFI/somethingsomething/grubfile" (not the real directoy, It just says GRUB in the end and it is in the EFI) and on the right I see Mac OS X. I wondered how can i possibly remove GRUB2 completely from my system?
Thanks for any help .

You have quite muddied up the waters, I'm afraid. Assuming you now have a single GUID partition formatted Mac OS Extended, Journaled, you should try reinstalling Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Remove report from MyInfoView?

Similar Messages

Maybe you are looking for