Remove Restrictions that stop me using portable power source and extension usb lead
remove the restrictions that stop me from using portable power source and ubs extention cables asap please
Who are you trying to address this to? Only other users here, not Apple If you want to suggest a modification to Apple you will need to contact them directly.
Use the Feedback forms here Apple - Feedback
Similar Messages
-
I need help designing a circuit in multisim that involves a buzzer, dc power source, and a relay.
Ive tried to build the circuit myself but i am having trouble getting the buzzer to go off. I dont know if im missing transisters or resisters or capacitors but im new to multisim.
You mean something like this? Toggle the key to activate the buzzer.
Attachments:
SimpleBuzzer.ms10 99 KB -
[svn:bz-trunk] 15126: Removed NonHttpFlexSession that is not used anywhere in our code.
Revision: 15126
Revision: 15126
Author: [email protected]
Date: 2010-03-30 01:48:55 -0700 (Tue, 30 Mar 2010)
Log Message:
Removed NonHttpFlexSession that is not used anywhere in our code. According to check-in notes, this class was introduced during LCDS and BlazeDS split and it was supposed to be extended by RTMP and RTMPT FlexSessions and will serve as a bridge between the community and enterprise servers, but this doesn't seem to be the case, so getting rid of it to avoid confusion.
Removed Paths:
blazeds/trunk/modules/core/src/flex/messaging/NonHttpFlexSession.javaVery strange, something else running that may be holding onto the UFL in memory?
I know it's extreme but what happens if you re-boot and use the new UFL? Just to verify it's unloaded.
What happens if you create a new report?
Try this[ sample UFL|https://bosap-support.wdf.sap.corp/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303135323530313426] also.
Thanks
Don -
How can I get rid of a whirling circle that stops me using a document?
How can I get rid of a whirling circle that stops me using a document?
Hi Sally, let's start with this to see if it makes a difference...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Restart & test. -
Why does my laptop give me a warning saying that firefox is using too much memory and to restart firefox to be more efficient? I just bought this laptop so I know it has the power to run what I need it to.
You appear to have AVG installed:
*See --> http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=173969#post_173969
From reading on the internet, it appears that when there is a spike in memory usage, AVG "interprets" that as a memory leak, possibly caused by malware. AVG could be incorrect concerning that assumption. Maybe they are being a bit too conservative about memory usage; just my opinion.
The decision is yours to turn off the "advisor" or leave it on.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
My MacBook Air won't charge using the power cord and it's not the power cord that's malfunctioning. I went to Radio Shack and tried two new cords. The battery is now dead. Any thoughts?
Unfortunately, my battery has died as a result of not being able to charge with the power cord. Not sure what an SMC reset is but I have made an appointment to bring my laptop in to the Apple Store. Thank you for your response. Very much appreciated.
Warm Regards,
Carla -
my phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??
Hello 3m4nz4,
After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iOS: Not responding or does not turn on - Apple Support
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of these symptoms:
Does not return to the Home screen after you press the Home button
Does not wake from sleep after you press the Sleep/Wake button
Does not turn on (or power on) when you press any button
Does not start up past Apple logo
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
To troubleshoot these symptoms:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I have Iphone 4s, and the phone will activate itself again. This I have verified, but when I shall put this onto my phone, so the phone will not approve the newusername and password. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? Silly to buy a new phone just for this .... The phone is almost three years old. How long can weexpect this to last? I would like an answer as soon as possible ... Thank you very much.
It sounds like your device might be in Activation Lock. Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
If so, do you recognize that email? Do you have an Apple ID that fits the same format? If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device. If so, turn off the device, then remove the device from the list. -
Hi guys,
I’m new to Mac and have a MacBook Pro Lion OS (10.6.8 I think !!!) with Parallels 7 (Windows 7) installed. Can someone please tell me what is the best software program that I can use to read, write and modify data / files on external HD (NTFS format) from the Mac OS ? I heard of Paragon and Tuxera NTFS. Are they free ? Are they good ? Are there any other software programs out there ? I heard that some people have issues with Paragon.
Thanks.Your best bet would be to take the drive to the oldest/compatible with that drive Windows PC and grab the files off, right click and format it exFAT (XP users can download exFAT from Microsoft) and then put the files back on.
Mac's can read and write all Windows files formats except write to NTFS (and in some cases not read) so if you can change the format of the drive to exFAT (all data has to be remove first) then you will have a drive that doesn't require paid third party NTFS software (a license fee goes to Microsoft) for updates.
Also it's one less hassle to deal with too.
.Drives, partitions, formatting w/Mac's + PC's -
Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
Every time I start Firefox , I get a black bar across the top of the page telling that I am using an old version and should update , it has a learn more button and that takes me to the mozilla home page
I am using Firefox 6 and the menu bar say it is up to date . I don't know where this came from and see no way to remove it . I can be closed but will appear the next time the browser is openedYour UserAgent string in Firefox is messed up by another program that you installed.
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter <br />
''If you see the warning, you can confirm that you want to access that page.'' <br />
Filter = '''general.useragent.extra.firefox''' <br />
Right-click that preference and select '''Reset''' <br />
Then restart Firefox -
I purchased a frist gen. iPad from a friend. I find that it's using 5.1.1. and says that it's "updated" when I check. Problem came when I tried to download my Netflix onto the ipad. I keep getting the prompt that I must upgrade to iOS 6. The netflix is 5.1 so I don't understand the problem. My son also purchased a first gen. iPad and was able to download his netlifx account with no problem. He got an option to "download a previous version". I don't get that option and we have the same iPads - both running 5.1.1
I read that there is a way around this problem but can't seem to locate a solution. I've tried numerous times and always get the same prompt - that I must upgrade to iOS6. Can anyone help me with this. Using my Netflix was one of the main reasons I purcased the iPad.And they do offer a compatible version. As I am running running Netflix on my first generation iPad just fine.
You'll need to first "purchase" the non compatible version either on a newer device that can run it or on a computer running iTunes using the Apple ID that is on the first Gen iPad.
After that is done, you should be able to go into the App Store App, and find Netflix under the Purchased Tab. Tap on it to download it and you should be warned its not compatible, but will be offered the compatible version.
App Store: Install the latest compatible version of an app
http://support.apple.com/kb/ht5919 -
What format i should use for my external hard drive that can be used interchangeably between mac and pc?
Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930 -
can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?
thanks in advance.
<Email Edited by Host>Yes you can. OS X version 10.6.6 and later can read/write exFAT. Windows XP SP3 and later can read/write exFAT. As posted by Radiation Mac, you can do it from Windows or from OS X.
However, I've noticed Windows to be somewhat picky about drives formatted on a Mac. So, if Windows can't read it, try formatting it on the Windows machine, and see how it works on the Mac.
Posting your email on a public forum isn't a very good idea. It will likely be harvested by spambots and used as the reply-to address for spam it sends out.
Also, most people are not going to send an email to you for similar reasons. Nobody knows who you are, so sending an email to you could be giving a spammer a valid email address.
The forum is set up to automatically notify you when there are responses to your questions. When you get one, you would log back into this forum and check to see what the answer was. -
I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that information is not sufficiently detailed for me. I have tried several options, but I come now way. Generally it seems that your information is only for the ones who can, not for the people who can´t although it is we who really need to learn. Please give me a step by step (click by click) information on how I can get the ice above the flower and then make the ice partly transparent so the flower is seen underneath. Please send me an e-mail Erik Solbu [email protected]
Open a new document big enough for your image. Then additional open your ice and flower image as well. Copy each and paste it into your blank document. They will be placed on their own separate layers.
Make sure in your layers panel. (Bottom right) the ice is above the flower, by dragging it in place. In that same layers panel click the ice layer to select in and find the opacity meter above. Drag to the left until you get the effect you desire.
Maybe you are looking for
-
how do i import from my Aperture 3 to 3.5.1 as Aperture 3 says it needs to be upgraded to 3.5.1 which I have done but i still cannot see any photographers.
-
Automatic Firmed Planned Order / Mass Change Planned Order
Hi PP Gurus, My requirement is I want to make all planned order created from planning run will be automatically firmed. I tried several option : 1. MRP type : P1, automatic create firmed planned order within planning time fence but for new requiremen
-
MATERIAL_MAINTAIN_DARK no mara append table update
Hello, I've a little problem using MATERIAL_MAINTAIN_DARK to modify some materials. I have to update fields in two append structures (one in mara, one in marm) when I use this function module, the update is ok on marm but not on mara if anyone have a
-
Feature Request: Linked flags, ratings, and labels in a stack
I use stacks to group the original image with derivatives of that image, but the way Flags, Ratings, and Labels work on stacked images isn't well implemented for that. Often, I will create derivatives of the original by flagging a bunch of images as
-
I want to understand The aironet Carrier Test
Hi I want to understand how can i use the Carrier test result one the diagnodtic page of the aironet web interface for knowing which frequency is used or not thanks