Remove Sales Org & Distribution Channel assigned in Material Master

Hi,
Is it possible to remove Sales Org & Distribution Channel assigned in Material Master. This is a newly created material I looked at MM06 to see if this assignment can be removed without setting the material for deletion. Any suggestions welcome.
Thanks.

the only way to get rit of existing data is to set a deletion indicator and subsequently run archiving.
In your case go to MM06, enter material number, sales org and distribution channel and set then the deletion indicator at this level only.
Then go to SARA object MM_MATNR and run archiving.
Archiving is usually a process, not just a sequence of transactions. Archiving requires customizing, and certainly the most recent OSS notes for the archiving object (this can be extremly many if your hotpackage implementation was long ago).
this is especially needed to archive only certain organisation levels, as this functionality came with OSS notes

Similar Messages

Sales Org/Distribution Channel to Plant Assignment

Hello All,
I am assigning a sales org/distribution channel to a plant, but an error message says that "Organizational data for inter-company billing missing in plant CN30". Can anybody tell me what this means and how to correct it?
Thanks and regards,
Olyn

Hi Olyn,
I think there may be something missing in your customising - please
see the relevant parts of note 109254 attached - in particular points
7 + 8 relating to transaction OMGN.
Kind regards,
Zsuzsanna

Which table contain the sales org/distribution channel details for an PO

Hi Experts,
Do you know from which table could i get the sales org/distribution channel details for an Purchase order.
The Purchase order is an UB document type. STO
Then there will be delivery order created for this STO.
I heard there are 2 kinds of Sales org/distribution channel in one Purchase order? One is Vendor, another is local...?Is this correct understanding?
Please let me know which table field could i find those info from an Purchase order document?
Or the questions could be:
Assumed we have replenishment delivery#, then how to get corresponding Purchase order#(UB, STO), and further how to get the sales org info?
Please kindly advise from table fields points of view...
How to get the PFrom an replenishment delivery#
Thanks.

Dear Hoo Laa,
You may find the Sales Organisation/Distribution Channel details in PO itself (Shipping Tab). Table where you can get Sales Organisation/Disribution Channel is EKPV.
Regards
Samier Danish

Relation between Sales org + distribution Channel + Division.

Hello all,
I have a requirement where I need to make an entry for sales data for a BP . On the Selection we have sales Org , Distribution channel and division. can any body tell me how check if the combination of entries made for the S.org , Channel and division are correct .
I tried using the FM CRM_BUPA_SALES_AREA_GET_ALL. but this doesn't show all the entries .
Thanks in advance
srinivas

Any Suggestions ?
Thanks ,
Shounak M.

Urgent,   Restricting Sales org & Distribution Channel

I'm having two users and one is from US and other MEXICO
If user from US LOG'S into SAP ,He should only his Sales org(US01) & Distribution Channel(001) & Mexico User log ,then he should be able to see only his Sales org(ME01).
My Question is there a way where we can restrict US / MEX Through Security , if not Can we restrict through abap if so Please send me some details , Which table /code .
any inputs will be appreciated ,

Hi
One way is as below.
DATA: BEGIN OF lt_tvko OCCURS 0,
          vkorg TYPE vkorg,
          bukrs TYPE bukrs,
        END OF lt_tvko.
SELECT vkorg bukrs FROM tvko INTO TABLE lt_tvko
    WHERE vkorg IN lr_vkorg.
IF sy-subrc NE 0.
    MESSAGE e085(wv).
ENDIF.
* Check all retrieved co.codes
SORT lt_tvko BY bukrs.
DELETE ADJACENT DUPLICATES FROM lt_tvko COMPARING bukrs.
LOOP AT lt_tvko.
*   Error Message: No authorization for sales organization &1
    PERFORM f_bukrs_auth_chk_p USING lt_tvko-bukrs 'ICC_FI_CN' 'E' '010'
                                     lt_tvko-vkorg '' '' ''.
ENDLOOP.
FORM f_bukrs_auth_chk_p USING value(lc_bukrs) TYPE bukrs
                              value(lc_msgid) LIKE sy-msgid
                              value(lc_msgty) LIKE sy-msgty
                              value(ln_msgno) LIKE sy-msgno
                              value(lc_msgv1)
                              value(lc_msgv2)
                              value(lc_msgv3)
                              value(lc_msgv4).
AUTHORITY-CHECK OBJECT 'F_BKPF_BUK'
    ID 'BUKRS' FIELD lc_bukrs
    ID 'ACTVT' FIELD '03'.
IF sy-subrc NE 0.
    MESSAGE ID lc_msgid TYPE lc_msgty NUMBER ln_msgno
      WITH lc_msgv1 lc_msgv2 lc_msgv3 lc_msgv4.
ENDIF.
ENDFORM.                    "f_bukrs_auth_chk_p
Select the sales organization mapping to Company code and then restrict.
Hope this can help you.
Kind Regards
Eswar

Finding sales Org, Distribution Channel

Hi Forum,
If i have plant and material how could i find its corresponding sales organization and Distribution channel.give field and table name.
Thanks
Lovleen
Edited by: lovleen sol on Jan 8, 2008 11:14 AM

Hi,
Check these table:
MARA: General Material Data
MARC: Plant Data for Material
MARD: Storage Location Data for Material
MARM: Units of Measure for Material
MVKE: Sales Data for Material
MBEW: Material Valuation
Base Unit u will get from table MARA and for others units check MARM.
Rewards points if helpful,
Regards,
Srinivas Ch

Material - Sales Org - Distribution Chanel

Hi friends,
I'm technical person.
Can any one tell me how to assign Sales Org - Distribution Chanel to a material.Exact problem is i want to create inforecord(VD51) there i have to assign material corresponding to customer but its not allowing me as material is not attached to the Sales Org and Distribution Chanel .
Regards
Sonal

Hi Sonal,
First you go to transaction MM01 for extending sales view in material master of the material which you want to use for creating info record.During extending material you select "sales org. data 1" view and put sales org. and distribution channel.I think that this will solve your problem....

BD64 Filtering Value (Sale org/ Distri Channel) need to get in EXIT_SAPLMV01_002

IHi ,
In BD64, Under MATMAS Data filtration is set on Sales Org and Distribution Channel. When I am sending material from BD10 , I need to get these values ( Sale Org / Distribu Channel ). B'cos on the basis of these values I need to fetch PLANT from MVKE table by passing SOrg and Dchl .
I am reading Segment value in exit EXIT_SAPLMV01_002, but , these values are present at MVKE Segment but I need those values at MARC Segment and MVKE Segment trigger at last where MARC segment trigger initially , So I am not able capture values in Segment also.
On the basis on MARC-MATERIAL & MVKE-PLANT , I need to fetch TRLT (Lead Time) from MARC.
How to retrieve Sale Org/ Dch either from Filtration Set at BD64 or from MVKE Segment that is triggering later then MARC Segemnt??
Regards
Ankesh

Hello Ankesh,
Modify MARC segment after MVKE is filled.
Please find the below sample code :-
Loop at IDOC_DATA into WA_ IDOC_DATA .
case wa_idoc_data-SEGNAM.
when 'E1MVKEM'
READ TABLE IDOC_DATA into WA_ido WITH KEY segname = E1MARCM
if sy-subrc = 0.
*write your logic here and modify idoc_data
endif.
endcase.
Endloop.
Thanks

How to know a users company, sales org, dist. channel and division...

Hello Experts,
Is there a way to know which company, sales org, distribution channel and most importantly division a
user is currently affiliated? Really need help on this one guys since I am gonna use it for authorizations.
Thank you guys and take care!

Hi,
If your informations are not in SU03 or XD03, so I think you can't have these informations.
(Maybe with column "Terminal name" in SM04 ?? If this information has been normed in your company)
Regards,
Stéphane.

I want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these

i want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these
IF I CREATE SERVICE ORG WITH SERVICE SCENARIO ORG DATA PROFILE,
MY PRICING IS NOT GETTING DETERMINED AS IT IS LINKED TO SALES ORG AND DISTRIBUTION CHANNEL THROUGH PRICING DETERMINATION SO HOW TO DO THE CUSTOMIZATION FOR THIS SITUATION
WITH REGARDS,
SATHISH

Hi Satish,
Please assign the org det. rules to org det. profile with Sales and Service scenarios and then assign the org. det. profile to transaction type. The below screenshot is just for your reference.
Hope it would fix your issue.
Regards,

Risk on wrong definition of sales organization, distribution channel and division

Hi,
our organization just started to implement SAP and SD module is one of the subject to complete.
We are in the defining phase of the above subject but I still can not understand the risk of being miss-defining the sales organization, distribution channel and division. Is it true will only impacting the pricing and reporting only? Are there going to be future impact on this?
Thank you before for your explanation.
Andy

Hi Andy,
Good to see the suggestions!
These are the rules I try to follow:
Do not over do it. Simple is better and facilitates change.
One sales organization for each company code unless significant differences exist between independent sales departments. Like one wants to use CRM and others won't. It's roughly equivalent to one by each top level sales director.
One distribution channel for each sales channel group that defines different prices or different shipping conditions for the same material. Like retail and wholesale have different pricing. Special rules can apply like mail delivery require different correspondence settings.
One division for each division of the company. If company has no clearly defined divisions (like Aeronautics and Footwear) there is no need (in sales) to split (it might in financials).
Using sales office and sales group for reporting is a lot better than the top level structures because it's easy to change them in master data, unlike sales org or distribution channel. And when departments get reorganized the system effort is significantly reduced if no change occurs at those three top levels.
So I normally use the sales office to the first or second level of reporting and sales group in some cases to represent individual sales persons or nothing at all in other cases.
regards,
Edgar

Combine sales org. dist channel & division

Dear Gurus,
What is the use of combine sales org, combine dist channel, combine division?
We assign sales doc type to sales area not to individually sales org, dist channel & division?
I cud nt understand sales org with ref 2 sales org, dist chnl with ref 2 dist chnl & with division also?
Wt is the logic behind that? Kindly give logical answer?
Regards
Rakesh

Dear Rakesh,
As GSL rightly mentioned that the use of Combine sales org. dist channel & division in addition to that,
I can say in one sentence what is the logic behind Combine sales org. dist channel & division.
"To share the sales document types to all sales areas"
It is like common divisions and distribution channel through this we can share the master data for all slaes areas which is maintained in one sales area.
But in Combine sales org. dist channel & division we share document types to all sales areas which are assigned to single sales area.
I hope this will help you,
Regards,
Murali.

Populating Sales organization & Distribution channel details

Hi,
we have a requirement to populate sales orgnization & distribution channel detials in Product search page(PRD01QR/ SearchHelp).
scenario: Role : IC Agent, While placing a customer order (BT115H_SLSO/SOHOverView ), in a items assigment block(BT115IT_SLSO/Items) there is a product field, with f4 help, when we click f4, there are a page for product search. on this page I need to retrive sales organization, and distribution channel detials with respect to customer.
I am new to WebUI, if it is not clear. Kindly reply with some questions.
Thanks,
Devender
Edited by: devender on Jun 1, 2011 10:02 AM

Redefine the outbound plug OP_SEARCH_ORDERED_PROD of the BT115IT_SLSO/Items and all the following code (most of the code are from the original, those I added are marked).
This will pass the Sales Org and Distribution Channel to the search help window.
METHOD op_search_ordered_prod.
CONSTANTS lc_query_name TYPE crmt_ext_obj_name VALUE 'ProdAdvSearchRgProducts'.
DATA: lv_event_string TYPE string,
        lv_title        TYPE string,
        lv_value        TYPE string.
DATA: lr_cw            TYPE REF TO cl_bsp_wd_collection_wrapper,
        lr_it            TYPE REF TO if_bol_bo_col_iterator,
        lr_col           TYPE REF TO if_bol_bo_col,
        lr_current       TYPE REF TO if_bol_bo_property_access,
        lr_qs            TYPE REF TO cl_crm_bol_dquery_service.
DATA: lr_org_ent TYPE REF TO if_bol_bo_property_access. "<--INSERT
DATA: lv_sales_org TYPE STRING, "<-- INSERT
             lv_dis_channel TYPE STRING. "<-- INSERT
cl_chtmlb_config_utility=>outbound_plug_event_info( EXPORTING iv_event_string = lv_event_string
                                                      IMPORTING ev_index        = gv_index ).
* call advanced product search popup
IF prodsearch_popup IS NOT BOUND.
    lv_title = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT/PRODUCT_SEARCH' ).
    prodsearch_popup = comp_controller->window_manager->create_popup(
    iv_interface_view_name = 'SearchHelpWindow'
    iv_usage_name = 'CUProdSearchPopup'
    iv_title = lv_title ).
ENDIF.
prodsearch_popup->set_on_close_event( iv_view = me iv_event_name = 'SELECT_ORDERED_PROD' ).
prodsearch_popup->set_display_mode( if_bsp_wd_popup=>c_display_mode_surrounded ).
* make sure the existing entry for ordered_prod is passed to the valuehelp if it contains
* an asterix.
lr_cw      = get_collection_wrapper( gc_context_node_admini ).
lr_it      = lr_cw->get_iterator( ).
lr_current = lr_it->get_by_index( iv_index = gv_index ).
CHECK lr_current IS BOUND.
lv_value = lr_current->get_property_as_string( iv_attr_name = 'ORDERED_PROD' ).
IF NOT lv_value CS '*'.
    CLEAR lv_value.
ENDIF.
*<-- INSERT
lr_org_ent ?= lr_current->get_related_entity( 'BTItemOrgmanSet' ). "Get ORGMAN BO
lv_sales_org = lr_org_ent->get_property_as_string( iv_attr_name = 'SALES_ORG' ). "Get Sales Org
lv_dis_channel = lr_org_ent->get_property_as_string( iv_attr_name = 'DIS_CHANNEL' ). "Get Dist Channel
*--> INSERT
CALL METHOD cl_crm_bol_dquery_service=>get_instance
    EXPORTING
      iv_query_name = lc_query_name
    RECEIVING
      rv_result     = lr_qs.
* fill selection conditons for product again
CALL METHOD lr_qs->add_selection_param
    EXPORTING
      iv_attr_name = 'PRODUCT_ID'
      iv_sign      = 'I'
      iv_option    = 'EQ'
      iv_low       = lv_value.
*<-- INSERT (Passing Sales Org and Distribution Channel to the search BO)
CALL METHOD lr_qs->add_selection_param
    EXPORTING
      iv_attr_name = 'SALES_ORG'
      iv_sign      = 'I'
      iv_option    = 'EQ'
      iv_low       = lv_sales_org.
CALL METHOD lr_qs->add_selection_param
    EXPORTING
      iv_attr_name = 'DISTR_CHAN'
      iv_sign      = 'I'
      iv_option    = 'EQ'
      iv_low       = lv_sales_org.
*--> INSERT
CREATE OBJECT lr_col
    TYPE
      cl_crm_bol_bo_col.
lr_col->add( lr_qs ).
IF can_have_iobject( ) = abap_true.
    prodsearch_popup->open( iv_inbound_plug = 'SEARCHPRODANDOBJECTS'
                            iv_collection = lr_col             ).
ELSE.
    prodsearch_popup->open( iv_inbound_plug = 'SEARCHPRODUCTS'
                            iv_collection = lr_col             ).
ENDIF.
ENDMETHOD.

Action Condition by Sales Org / Dist Channel for Opportunity Management

Hi,
i need to set action condition by Sales Org / Dist Channel for Opportunity.
i tried using object BUS2000111 but can't find any parameter referring to Sales Org/Dist Channel.
any lead really appreciated.
JD

Hello Jushan Djuwardi,
Can you please tell me how you solved this question.
Thanks.

Scenario regarding Sales Organization, distribution channel

Dear Experts,
I am doing
1. Simple Domestic sales from manufacturing plant
2. Depot Sales: In which, Stock transfer between two plants i.e. from Manufacturing Plant to Depot and sales from depot
3. Exports: Sales to other country.
Now, my confusion is, whether i can use a single sales organization and three distribution channel for all these three scenarios or do i have to create three different sales organizations along with three distribution channels and do the processes?
My anather question is, if i want to do depot sales, then it is possible to have one manufacturing plant and two storage locations at different places. i.e. issuing storage locatin and receiving storage location.
Is it possible to sell goods from receiving storage location to end customer?
What will be simple organizational structure i can make to acheive these things?
I would be very helpful if you can give me your expert inputs on the scenario. I am trying to make the simple organization structure with less complications for my client.
Thank you
Amit

Hi
As suggested the best choice will be to go ahead with one sales organization for all these scenario. Since in domestic sale / export sale the only difference will be the Pricing configuration and that can be easily mapped using the either a distribution channel / or a customer pricing procedure.
Now when it comes to handling the sales scenario - there is a option to go ahead with two or even three distribution channel.
1. Domestic Sale (Can handle Both Depot sale and Manufacturing same- seperate dist.channel will help to pick right pricing procedure
2. Export Sale - This distribution channel will help you to pickup export pricing procedure (Also if not then you can have customer pricing procedure to pick the export pricing )
3. Stock Transfer (Can be done through domestic sale also)- I hope a seperate pricing procedure will be created for STO. So from the reporting purpose a seperate dist.channel can help you to have more clarity to the user - Again will help you to pick a different pricing procedure (A seperate Cust.pr.Pro can also be used to pick a different pricing procedure)
4. If you are using DEPOT sale with Excisable mean you need to maintain RG23D register. Also you need to generate Excise Invoice, challan . If you use transfer process of storage location to storage locationthen there are concerns as how you will generate challan and Invoice. OR if it is a DEPOT to DEPOT Transfer then also you need supporting document. please do check as whether you need the required output or not.
So Depot need to be maintained a PLANT in SAP with a check box as saying Excisable and relevant for RG23D. and a Normal Sales process will follow. Reporting can be done of PLANT as a primary key.
Distribution channel will be a simpler way of Differentiation - and for reporting purpose.
Thanks
RB
Edited by: RBhardwaj on Feb 16, 2012 6:54 PM

Remove Sales Org & Distribution Channel assigned in Material Master

Similar Messages

Maybe you are looking for