Remove Server from /private/Network/Servers?

I'm integrated with a Windows AD Network. We moved this user's home directory to another server but the old server still shows up in /private/Network/Servers and if the woman tries to save something to the old server instead of going to the server (since it doesn't exist anymore) it saves it to the hard drive under /private/network/servers/servername/directory
Reading online I read about something going into "dscl" and changing to /search/mounts or something like that but trying to use the "delete" command in there doesn't work.
Anything you can tell me?

Hi,
If you are under All Servers dashboard, you may right click on the server which you want to remove and select “Remove Server”. If you want to remove a server from a Server Group,
you may right click on the server which you want to remove and select “Remove Server from Group”.
Please note, you cannot remove the current server from the All Servers dashboard.
Regards,
Arthur Li
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Arthur Li
TechNet Community Support

Similar Messages

Can't open file "/private/Network/Servers...

Sometimes in an Active Directory environment....
We open file error
Can't open file "/private/Network/Servers/xxx-fs01.mycompany.edu/HomeXXX$/Students/YOG15/UserNa me/DOCUMENTS/filename.key"
This happens when using the recent file/items from within Safari.
The workaround seems to be to logout then login again. Or some seem to think that you should re-login with the UserName being case sensitive.
I have a hard time duplicating this problem but is does in fact occur and I have a ScreenShot.
iMac 1.83 Core Duo 1GB RAM Mac OS X (10.4.7) Safari 3.0.1

Sometimes in an Active Directory environment....
We open file error
Can't open file "/private/Network/Servers/xxx-fs01.mycompany.edu/HomeXXX$/Students/YOG15/UserNa me/DOCUMENTS/filename.key"
This happens when using the recent file/items from within Keynote
The workaround seems to be to logout then login again. Or some seem to think that you should re-login with the UserName being case sensitive.
I have a hard time duplicating this problem but is does in fact occur and I have a ScreenShot.
I will try and see it it happens in Pages recent items list.

Build a gateway server for private network ???

Hello all good friends,
I has a private network, and one Linux box with public IP address, two NICs connecting direct to ISP. Now, I want to set up this linux box to operate as Gateway server so that all my private networks can use Internet. I have asked this question to many peoples and got much suggestions such as install IPchains (NAT server), IPtables (NAT server), SQUID (Proxy server), ... But until now the big question to me is which software is the best one, I mean which software allow my private network accessing to Internet fastest ? (Proxy server or NAT server only ?) and which one is the most secure ? Besides, you know another opinion, please tell with me if you don't mind.
I very grateful to all of you answers me in all my life.
Tu from Vietnam

Best thing I would suggest is to buy a Gateway Router. I have D-Link 804, but you can buy anything that pleases you more or suits your demands. Also this way, you donot have to have a computer "turned-on" all the time. Some other advantages are that functions like DHCP, NAT and other features are built into the router. This way you can connect upto 253 Computers to a router and also have a 100Mb/sec, internal home network. You can also go for the wireless option, if you have more money to spend. Just look up on the net for more information.
i2l2

Best Way to Remove Server from Active Directory

I was wondering the best practice to remove a server from AD according to Microsoft.
Option 1 :
Login to server and take it off the domain and put it into a workgroup
Then login to AD and make sure it is removed
Confirm removal from DNS
Option 2 :
Login to Domain Server and manually remove
Confirm removal from DNS
Thanks
Also the servers are running Windows 2008 R2

So if its just a file server, I would just go with option 1 to ensure the cleanest removal from Active Directory?
What would happen if I just removed it from Active Directory after powering it down? Still a clean result? Or is it considered best practice to take the server off the domain from the server then power it down and then remove from Active Directory?
Please let me know and also if you want me to clarify.
I am not sure if I understood you correctly but if you just right click the computer object in Active Directory and delete it you have to manually delete the DNS records as well or wait for scavenging period to delete the outdated DNS records.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Remove entries from the network services list?

So I used to run Missing Sync so I could get my crappy Motorola Q to (sorta) talk to my Mac. Ditched it, got an iPhone. Removed it from my system.
But in the Network system preferences pane, in the lefthand column that lists all of my "services," there are 37 duplicate entries, all created by Missing Sync - they're labeled "Missing Sync for Windows Mobile (en3)".
And I cannot delete any of them. Selecting one and clicking on the remove button does nothing. I can rename them to whatever I like. I can disable them, which grays them out...but they're still there.
Does anyone know how I can purge them from my system?
Thanks.

Hi,
Just wondering if you were able to solve the problem because I have the exact same problem! Tried installing and un-installing the program a gazillion times; all in vain.
Also used Pacifist to figure out all the places the program was throwing its crap and took all that stuff out ... still can't get rid of those network entries ...
Any help would be greatly appreciate!
Thanks!
- Archit

Server not in \Network\Servers\

My server is not showing up in \Network\Servers, rather just sitting there in \Network\xserve. How do I change this?

You don't! That's the normal operation.

Remove server from mac pro

I would like to remove os x server from my Mac Pro. I am a newbee and did not know that I should have not put it on this machine and now I would like to remove it.
Thank you

Move the Server application to the Trash. Delete the following items (some may not exist) and reboot:
/.ServerBackups
/var/db/.ServerSetupDone
/Library/Preferences/com.apple.serverd.plist
/Library/Preferences/com.apple.servermgr_accounts.plist
/Library/Preferences/com.apple.servermgr_certs.plist
/Library/Preferences/com.apple.servermgr_info.plist
/Library/Preferences/com.apple.servermgrd.plist
/Library/PrivilegedHelperTools/com.apple.serverd
/Library/Server

My efforts to remove malware from a network external hard drive connected to my Intel based iMac is now causing programs to hang when I try to open them.

I own an iMac, recently updated with OSX 10.75. It is the core computer on a home network shared with an iPad, Apple TV, two network printers,my wife's laptop, two iPhone, a BlackBerry and a BlackBerry Playbook. I am experiencing three if not four problems that are overwhelming.
My original problem is associated with Windows emails files or documents stored on my external network hard drive. One or more has malware and is sending malware laced files across the Internet to points unknown. As someone pointed out in a forum my iMac may be hosting,sharing and propagating Windows malware. I originally used Trend Micro software on my IMac to monitor any viral activity. Two weeks ago I noticed a number of notices from servers around the world saying my message was not undelivered. Since I had sent messages to the people I simply deleted the emails. Next I noticed the emails on my BlackBerry and my BlackBerry playbook.I configured the Trend to do a complete scan and although it did a complete scan it did not perform a full network scan. It did identify a series of .x27 document files with the same name tbut each had a sequential number. I assumed hat these were the source files that had sent out the email documents selling Viagara and othernproducts. I manually deleted thousands of the source documents and the files. This caused some disruption to my computer but it did not produce a hardware or software problem. By following this effort in conjunction with security scans I do believe the malware was activated by Iranian students who were able to activate the malware through my BlackBerry and BlackBerry Playbook. I learned this from an encounter I had when trying tondelete these files on my computer and my BlackBerry.
When using my PlayBook after deleting the files from my computer I noticed more messages being returned from servers. I realized that email accounts connected to my BlackBerry and BB Playbookn were not protected from this problem. As I searched for remedies I learned about turning on the firewall in the previous version of Lion but that did not stop the BlackBerry problem. Each time I deleted a source file on my computer more documents were released. I eventually received McAfee from my ISP. It provided security on the entire network. My first full scan of my external drive identified two malware files. One of them was associated with the Cialis ad the other was from a firm in the Middle East called ADP. it could not remove the latter file.
Moreover each time I attempted to remove the source file from my hard drive a file labeled A239A076F would show up on my Blackberry. As I removed them thousands of these files would show up. Ultimately I eventually disconnected the external hard drive and removed the battery from the phone and not use the email accounts these messages had used to enter my iMac. I am contacting ATT about BlackBerry data security and switching to a different phone for business purposes. I will probably change to an iPhone or Android phone for business purposes. I am also looking at ways to resolve the malware on that drive. There are a number of business and personal files on thatbdrive that I hope to keep. I dread having to pay McAfee to configure the software to eradicate the malware.
Moving on...last week I updated my iMac to 10.75. It simultaneously updated every Apple based program as promised. It did not update the non-Apple programs. I am not an IT professional and assumed that it had done so. On Saturday I attempted to download a file associated with my router extender using my untethered Playbook and BlackBerry desktop software. The program hung. I attempted a reboot and it reopened with the hung program. It created an alias file on the desktop. My inclination led to put the alias file in the trash can and delete it. My computer did not respond well to that action. It has been rebooted with Cmd-s-esc tens of time to see if that would activate a file check. It did not. I was able to run a disk utility check. And in spite of the hung process it eventually said the drive was okay.
Long story in a nutshell. My iMac is responding as if it is looking for a subprogram to complete its a function. Or it is attempting to finish the BlackBerry operation it began on Saturday. I hope this makes sense to someone and the know how I can restore functionality to my iMac.
Thank you.

I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/

Can I set up an FTP server from a networked Time Capsule?

I've been looking around and can't seem to find this specific question addressed anywhere, so I'm hoping someone knows the answer to this.
I have a Time Capsule connected directly to my router. Other than its intended purpose, I would like to connect an external USB hard drive to it, and use that as an accessible FTP server for a select few.
To my understanding, port forwarding the router and giving WAN access would allow any user to see the entirety of the Time Capsule - which I do not want. I only want to share this one drive and have it maintained by an FTP login/password. I would then share this drive on the internal network.
Is this possible? Or will I have to run the FTP server off one of my workstations?
Cheers.

Not in usable and reliable way no.. many things are possible.. if you have the (various bad words for foolishness or courage)... but it is too hard as there is no hacked firmware out there for a TC. It is a device intended for TM backups of laptops by wireless. Anything else is restricted strictly to what Apple want you to use it for. You can buy a cheap NAS, single disk unit will almost inevitably have FTP in them.. over network FTP is ok but remember it is not secure so you want SFTP for internet access.. And be warned.. FTP itself will be blocked from WAN on the TC.
There are severe FTP issues with the AE/TC.. the last couple of versions of the Gen1-5 firmware as well as the Gen 6.. See this thread.
https://discussions.apple.com/message/22948061#22948061
https://discussions.apple.com/message/22927625#22927625
The last post in this thread by.. SBeattie2
I think will condemn you to replacement of the TC by a router that actually conforms to standards if you are trying to forward it to a workstation or NAS even.
SFTP might work.. see this thread.
https://discussions.apple.com/message/22872985#22872985

Can't access BI 11g server from local network.

I have a problem..
Hope someone can tell me the solution.
I've installed BI Publisher 11g in my server. From the server, I can access it via web browser with URL http://localhost:7001/xmlpserver/servlet/home
The problem is, when I try to access it from other PC in my local network with URL http://10.11.9.190:7001/xmlpserver/servlet/home, the page fail to show and there's connection timed out error.
I'm using Windows7 in my server.
Is there any configuration that I missed?
Thanks for helping me..

The best way around firewalls is to stream using port 80. This is a preference setting in QuickTime Streaming Server and QuickTime Broadcaster. This will allow the stream to pass through the hole in the firewall usually used for HTML (web page) traffic. HOWEVER, you cannot use this port if you are also running web server services (Apache) on the same computer/server since they need to use port 80 also. If you need to host a web site AND stream QuickTime using port 80, you will need two computers (or at least two IP addresses; one for each service which is a little tricky. If both services are trying to use port 80, weird things will happen, most often the HTML data will rule and the streams won't work. This has been my experience. Good luck!

Multiple ESS access to single EP server from two backend servers.

Hi Experts,
I have one concern regarding ESS.
Can we do or can we make two ESS access (R3 server1 and R3 Server2) from one Portal server.
I heard that from one portal server (ESS) we can connect multiple clients which are from backend R3 (example client 100 and client 200)
My requirement is :
We have two R3 backend servers and one EP(ESS) server.
Can we access two backend systems from one EP server with Two ESS tabs.
I am expecting Multiple jco settings, multiple SSo, Multiple SLD, Multiple SPRO Menu settings, UWL settings.
Multiple service specific settings to be access by using single EP server(Multiple ESS Tabs)
Please help me for doing this.
Regards
Kumar.

yes you can do so As Pooja indicated also refer
Please have a look at the Note 596698
Thanks for clearing that up, Now if I understand the issue
correctly :
1 Portal, Two backend R/3 System, This can be done, Now then
if you dont want the particular application disable that
r/3 as you are aware that the links appear from V_T7XSSSERRES.
Here you can also make sure some applications appear or no.
Accessing multiple Backends in WebDynpro:
How it can be done?
1) Define different JCO Destinations
The logical System names have to be defined in the Web Dynpro Content
Administrator.
Different clients or completely different Systems can be accessed
given that the function modules called exist in those systemsThe logical System to be used can be passed to the Web Dynpro
Application by using a URL Parameter
The URL Parameter can be easily maintained in the iView Property when
using the portal.
The standard way to handle this is to create copies (via delta-link) of
all the business package iviews and change the 'System' property in the
newly created iviews to point to the correct system Alias. From the
portal point of view this is all that is required in order to point an
view to a different system
Refer these links for further information:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.
docs/library/webas/webdynpro/How%20to%20Use%20the%20Web%20Dynpro%20Conte
nt%20Administrator.pdf

Removing node from private parameter

hey wondering if anyone can help me with some coursework im doing
im trying to remove a record from a queue by using a parameter from a class.
class QueueNode
     private      String      document ;
     private      String      owner ;
     private      int           size ;
     private     QueueNode     next ;
     private     QueueNode     previous ;
     public QueueNode (String document , String owner , int size)
          this.document = document ;
          this.owner = owner ;
          this.size = size ;
          next = null ;
          previous = null ;
     public String getDocument()
          return document ;
     public String getOwner()
          return owner ;
     public int getSize()
          return size ;
     public QueueNode getNext()
          return next ;
     public QueueNode getPrevious()
          return previous ;
     public void setDocument(String document)
          this.document = document ;
     public void setOwner(String owner)
          this.owner = owner ;
     public void setSize(int size)
          this.size = size;
     public void setNext(QueueNode next)
          this.next = next ;
     public void setPrevious(QueueNode previous) //this is the part im having trouble with
          this.previous = previous ;
class Queue
     private     QueueNode start ;
     private     QueueNode end ;
     public Queue ()
          start = new QueueNode("","",0) ;
          start = null ;
          end = new QueueNode("","",0) ;
          end = null ;
     public void add ( String document, String owner, int size )
          if ( start == null )
               start = new QueueNode(document,owner,size) ;
               end = start ;
     else
               QueueNode temp = new QueueNode(document,owner,size) ;
               temp.setNext (end) ;
               end.setPrevious (temp) ;
               end = temp ;
     public boolean isEmpty ()
          return ( start == null) ;
     public QueueNode remove ()
          QueueNode temp = new QueueNode("","",0) ;
          if ( start == null )
               return null ;
          else if ( start.setPrevious == null)
                    temp = start ;
                    start = null ;
                    return temp ;
               else
                    temp = start ;
                    start = start.setPrevious ;
                    return temp ;
     public void displayAll ()
          QueueNode temp = new QueueNode ("","",0) ;
          temp = start ;
          while ( temp ! = null )
               System.out.println ( "Document: " + temp.getDocument() ) ;
               System.out.println ( "Owner: " + temp.getOwner() ) ;
               System.out.println ( "Size: " + temp.getSize() ) ;
               temp = temp.setPrevious ;
and these are the errors im getting
Queue.java:47: cannot resolve symbol
symbol : variable setPrevious
location: class QueueNode
          else if ( start.setPrevious == null)
^
Queue.java:56: cannot resolve symbol
symbol : variable setPrevious
location: class QueueNode
                    start = start.setPrevious ;
^
Queue.java:74: cannot resolve symbol
symbol : variable setPrevious
location: class QueueNode
               temp = temp.setPrevious ;
^
3 errors
any help appreciated
thanks

Let's look at the first error:
Queue.java:47: cannot resolve symbol
symbol : variable setPrevious
location: class QueueNode
else if ( start.setPrevious == null) You are confusing the field previous:
private QueueNode previous ;with the method setPrevious:
public void setPrevious(QueueNode previous)
    this.previous = previous ;
}That would be like confusing your weight with trying to lose weight.
Here is how a field might be used:
temp.previous = null;
other = temp.previous;
if (another == temp.previous)Here is how setPrevious is used.
temp.setPrevious(null);Does this make any sense?

Publishing iCal - which URL of lion server in private network???

I was looking in apple support and in the web for hours, I simply want to publish may calendar on my private server (NOT in the internet!) services are already running (profilemanager, iCal...). When I open iCal on my client (MacBook) and want to publish my calendar, I am asked for the base-URL of my private server, I tried it with "server.local", "macintosh.local", "192.168.1.xx" - always get the answer: "invalid URL"

I would suggest creating a directory in the Documents directory called something like ical. Do a "sudo chown www:www ical". Set the Web folder in Server Manager to /Library/WebServer/Documents/ical and you should be away. The URL for publising would then be http://aaa.bbb.ccc/ical
(I also turned off the performance cache.)
I've had a range of problems with the way virtual hosts work on 10.4. (It seems even the order of stuff inside each virtual host file in /etc/httpd/sites can screw things up - go figure) As you guess, permissions seem to be at the heart of it.
Hope this helps

I Want to disable or remove tsclient from my network list and stop it to send requests

tsclient is creating problems to me and i would like to uninstall tsclient if not possible to uninstall then like to disable
Please answer it with proper images if possible.

Hi Ajay,
Thank you for posting in Windows Server Forum.
Yeah, agree with words of armin. We can create group policy to disable all drive redirection. Also we can disable on RDSH configuration wizard.
Server 2008 R2:
On RDP server> Open "Remote Desktop Session Host Configuration”> Properties> Client tab.
Now under Redirection uncheck in the box for Drive.
Server 2012\R2:
RDS>Session Collection>Properties>Tasks>Client Settings>Uncheck “Drives”
GPO setting:
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection
Do not allow drive redirection: Enable
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Removing Database Server from Farm

In my Servers in Farm I have
SHAREPOINT_DB Microsoft SharePoint Foundation Database
SQLCL-SPOINT Microsoft Sharepoint Foundation Database
SHAREPOINT_DB - is the alias configured on all the wfe's to point to the actual database server which used to be
SQLCL-SPOINT\SHAREPOINT. We have recently migrated all the databases off of db server to a different VM SQL-SPDBP and updated all the cliconfg to point to the new server. I am not really sure WHY SLQCL-SPOINT is showing up as a database
server. All of the service applications with the exception of Usage app use the sharepoint_db alias. The Usage app is the only one that has the sqlcl-spoint/sharepoint hardcoded in the config. I will be using powershell to update that pointer
shortly. That being said .. could that cause SQLCL-SPOINT to show up in servers in farm? Is there a way to verify nothing else is looking at that server before I remove server from Central Admin?
Thank you for any replies!

If you have any database configured to use a specific SQL Server/instance/alias, that will show up in Servers in Farm.
You can verify what is being used by running:
Get-SPDatabase | Select Name,Server
If the SQL Server doesn't show up there, it can be removed.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Remove Server from /private/Network/Servers?

Similar Messages

Maybe you are looking for