Remove Software for Officejet 6500

I've just uninstalled my Officject 6500 All-In-One printer and, although I was able to remove the primary software for the printer by going to "Programs & Features" in the control panel, some of the residual software such as "HP Document Manager", HP Solution Centre, etc., remain. I have tried to uninstall these as well, but, when I click on "Uninstall/Change" Windows Vista requests permission (as usual) and after clicking OK, nothing happens.
Can someone please provide me some advice on how to remove this software completely or advise if there is a removal tool out there that I can download and get this stuff off my machine?
I tried HP Tech Support, but, of course, they wanted to charge me $24.99 for the help. Yeah right!!
Any assistance anyone can offer will be greatly appreciated.
Thanks

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system is this?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Driver for Officejet 6500 E709a needs to be updated. Currently causes distortion of Excel sheets.

Per Microsoft, the driver for the Officejet 6500 E709a needs to be updated in order to resolve a problem which causes distortion of MS Excel worksheets. http://answers.microsoft.com/en-us/office/forum/office_2010-excel/excel-2010-scrolling-problem/166a8...
From the forum page linked above:
If the issue occurs in safe mode too, change the default printer and check. If Excel works fine after changing the default printer then contact printer manufacturer to update the printer drivers.
This question was solved.
View Solution.

There is always a chance that a glitch has occurred with the original driver install. Therefore, I always recommend, though it may not be an update, reinstalling the printer and software if necessary. It has solved a number of different types of problems.
Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

"File Corrupt" error when opening Driver software for OfficeJet 4500 G510n-z

I'm trying to reinstall the software for my OfficeJet 4500 G510n-z printer and I have downloaded the drivers from the HP support site multiple times. Each time I try to open the file I get an error of "File is Corrupt" and it stops opening. I was able to eventually install the printer but not the HP Solution Software.
I am running 64-bit Windows 7.
As you can see below, I have the printer installed but not the Solution Center. How can I add the Solution Center?

What Anti virus software are you running?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Part for officejet 6500

I inherited a used officejet 6500 and need to get a part so the paper will feed properly. Remove duplexer if attached. There are some black plastic "fingers" pointing at a rod with wheels. One set of these "fingers" has broken (the pair on the right). Does anyone know where I can buy these "fingers"? Or do I have to go to a service center? Thanks

The service center or HP should sell them too I would think
http://www8.hp.com/us/en/contact-hp/support.html

Scan software for OfficeJet 4215 in Leopard 10.5

I read here that scan software for the HP OfficeJet 4215 under OS 10.5 was being tested and almost ready for release. That was in October, 2009. I can't find it anywhere. The HP download site says that the scanner function of the 4215 is not supported under 10.5. Does anyone have suggeestions on how I can get the scanner to work? Everything I try says, "No Image Capture Device found."

Have a look at VueScan:
http://www.hamrick.com/
By far the best drivers and scanning software around, but not free.

Unable to load Full Feature Software for Officejet 7410

I have downloaded the current Drivers and Full Feature Software for my 7410. The installation states that it completed successfully. I do not have any new software loaded on my system. I do not have the software access to any of the features that are on the 7410. I can print, but the automatic two sided printing does not work. I donot have the Photosmart application avalibale also. My OS is currently Win 7 Professional. Is there something I am missing to get the Full Functionality of my7410 back in service? In the near future, I will have Wondows 10 installed. Will there be an update available with new drivers and Working Software?

Hi Teak37,
I understand that you are having an issue getting the full feature software for your printer installed from the CD. I will try my best to help you get the printer installed. Here is a download for the HP Photosmart and Officejet Full Feature Software and Drivers. Download this file and save it to your desktop. Then follow the instructions in this document for Installing the Printer Software in Windows 7 for a Wired (Ethernet) Network Connection to install the software and drivers.
I hope this information helps, let me know if you need further assistance.
Thank you,
I worked on behalf of HP.

Problems with eprint for Officejet 6500 e709n

Hi - I have a HP Officejet 6500 e709n printer. when I go to setup there is not web services option under any of the menus. I've printed a configuration page which shows that web services is enable but can't figure out how to print the web services information page. we had this printer attached to both my husband's and my ipads now it is nowhere to be found. andy help is greatly appreciated. thanks.

Hi,
Cloud Services as HP ePrint or Print Apps are only available for newer models, such fucctionality is not available as part of the HP Officejet 6500 (E709) Series.
You may find any supported products for Web Services listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&lc=en&cc=us&dlc=en#N77
You may print from iPad using the HP ePrint mobile app through your local network however:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01616126&lc=en&product=3795314&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Duplexing unit for Officejet 6500

I've got hold of an Officejet 6500 to take to university with me next month. I'm thinking that a duplexing unit would be useful but HP UK don't have any and I can't find any online elsewhere (except HP USA, which would be a bit too expensive I reckon). The part number is CB057-67001, anyone know of a place where I might be able to get hold of one?

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system is this?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Trying to find Windows 7 driver / software for OfficeJet 4500 (CB867A) connected using Wired Network

Hello,
I am trying to use my Son-in-Law's HP OfficeJet 4500 CB867A (G510G). I am able to SUCCESSFULLY:
Communicate using a browser with the printer (e.g. http:\\192.168.10.139)
Print from my Samsung Galaxy S3 32GB phone using the HP Android software. If finds the printer just find and prints just fine.
Thus the printer looks to be connected successfully to the network. (Wouldn't you agree?)
The problem is installing the printer on our various Windows 7 Ultimate x64 systems. Right now I've only been trying my workstation (Dell T7500). When I follow the directions what comes down is the basic driver and software. The basic driver and software ONLY supports USB. I cam to this conclusion throgh two facts:
The documentation on the download page, when you look at the details says only supports USB. This is true for G510A and G510G. I didn't try G501N, as it is wireless. Maybe it is really Wire and Wireles . . .
I can't get the setup Wizard to try to find the printer through anything but USB.
How do I get Windows 7 to recognize this WIRED (e.g. Cat7 cable) HP All-in-One printer?
Thank you?

Hello,
Thank you for the very quick reply. I will try the download link you gave me.
As for the documentation, I looked again and what I'm seeing says Windows 7 and does say for "USB only." I page and what I'm reading are:
URL: http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-4500-All-in-One-Printer-Series---G510/3...
The text I'm reading says:
Details
The Full Feature Software and driver solution is the complete software solution intended for users who want more than just a basic drivers.
IMPORTANT NOTES
For Windows XP SP 1 Starter Edition and Windows Vista Starter Edition
Only printer drivers and the Toolbox are available
Is supported for USB only
Hardware Setup Wizard is not available
After downloading and installing this software, I got two icons on the desktop. They both (in their own ways) insisted on using USB to connect to the printer. One was a HP Solution Center and the other a HP Printer Setup icon/program.
Again I'll look at your download. Hopefully, it will be what a wired printer needs to print and scan! :-)

How long does it take to download and install full feature software for Officejet 4500 g510g-m?

I have been updating my software in hopes I can get my Officejet 4500 g510g-m to work wirelessly but the full feature software has been at the "installing software" stage for over an hour. Is this normal? Also, anyone know where I can find a step by step guide on setting up my printer for wireless use? Is it even possible?

The download speed is dependent on many things, but is often a factor of your Internet provider's service. If you are on basic DSL, then over an hour is not out of line. If you are on cable, something is wrong.
Try this for a guide: www.hp.com/go/wirelessprinting
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Cartridge Management For Officejet 6500 Wireless

Hi There,
I recently called in to tech support to enquire on how to determine more accurately the level of ink remaining in the cartridges. I was told to print a status report that provided me with an estimated ink level. I am concerned that the ink usage may be under the amounts suggested for the XL cartridges.The status report stated that 600 pages have been printed, which may be more or less in line with the the XL cartridges. The magenta cartridge shows the lowest level, followed by yellow, and blue.
Can you please clarify the following:
1. Once the ink delivery information reports a cartridge to be empty,should it be removed, or left in place?
2. Can you operate the printer with only a black ink cartridge inserted?
3. Is it true that when you select to print with black ink only, there is stilll some usage from the color cartridges?
Thank you very much for your help!

1.Ink delivery report is considered acurate. So the ink is needed to be replaced.
2.You cannot.
3.For best print quality and to get a solid black color yes it may use color ink.
Learn more about HP inks at:
http://www.youtube.com/watch?v=dIF_myynUlc
http://www.youtube.com/watch?v=HuOBOjh70eI&feature=related
Let me know if this helps. Have a great day
I work for HP but my posts and replies are my own.
-Michael

Missing file after installing software for Officejet 6210 All-In-One printer.

I got the following error message: "The file C:\{Program Files\HP\Digital Imaging\skins\oov1\skin.xml does not exist". Can anyone tell me where to get the file and then how to download it? Your help will be much appreciated.

HI knewsomga,
WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
Please follow the instructions below.
Please hold down the windows flag key and the R to open the Run box.
Type services.msc and press Enter
Locate Windows Image Acquisition (WIA)
Right click and open Properties
Stop the service from the General tab and then Start it again
Verify that the Startup type is set to Automatic rather then manual
Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
Click here to download and run the utility > HP Print and Scan Doctor
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How can I print black ink only when in automatic two-sided mode for Officejet 6500?

When I set the printer to automatically print on two sides, it only allows color or high quality grayscale as print color options. If I print on only one side, then I have a third option for black ink only. Does anyone know how to get black ink only while getting two sided printing automatically?
This question was solved.
View Solution.

Sorry, this is not an option. When printing the front page of a duplexed page the black is underprinted with color to make the print "set" and dry faster. As a result "black only" is not an option when printing automatically duplexed pages.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Is their virus removal software for i mac and i tunes ?? thanks

how can i clean any viruses on my i tunes or i mac?

See my Mac Malware Guide.

Updating to Win 8.1 for Officejet Pro L 7590 usage

I am trying to update my software for Officejet Pro and getting no where. I have tried the original disk and got the message not compatible with Win8.1. I have also dowmloaded the on line updates, but I get No where. If someone could tell me the steps in what order I should take I would appreciate it. KLJ2
I really want to be able to use the features of the original installation, such as fax and amount of ink.

Hi @KLJ2
you can download the full feature software and driver from the printers support page here; OJ_AIO_L7X00_Full_Win_WW_140_408-4.exe, or you can download and install the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
Please let me know if this resolves the issue, or if you require further assistance.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Remove Software for Officejet 6500

Similar Messages

Maybe you are looking for