Remove Starbucks from my Text Screen

How do I Remove the starbucks ad from my text screen. I just switched from my IPhone for this **. Now you are telling me it was a huge mistake. I am upset I pay a lot of money every month for verizon service and paid a bunch for this phone and I get stuck with ads/ apps I cannot remove.

What phone do you have? There are a lot of texting apps...LOTS. Each one has different backgrounds and features, sounds, and all kinds of extras. You can even get different keyboards separately from apps in the Store if you want a different layout, including iPhone-like keyboards. I use the stock LG G2 app for texting, but I also use a separate keyboard app called Google Keyboard that is more to my liking. There is also Hangouts which handles texts and video calling built into Android phones.

Similar Messages

To remove error from error message screen stnd SAP in case condition met

Hi all,
I have a strange problem may be not to you guys,
well i am showing an error message in ME21N on certain condition in EXIT 'EXIT_SAPMM06E_012' this is working fine i am using simple stmt Message e(MSGno) text-01, but when i correct the problematic part and again want to save my data it is aloowing me to save data but my error message(In red) still remains there if i see in EDIT ( of faulty messages pop-up window). Can any body know if we have to remove error message manually in case our program satify the condition.
if yes what portion i m missing to delete the error message.
any reply will be highy appreciated <REMOVED BY MODERATOR>
Mandy
Edited by: Alvaro Tejada Galindo on Feb 7, 2008 10:51 AM

Well we can remove message from message text tray using pre-defined macros to erase message.its like
IF SY-SUBRC NE 0.
IF NOT tekpo-id IS INITIAL.
"This is to remove error message later on
"if problem corrected.
mmpur_business_obj_id tekpo-id.
ENDIF.
mmpur_metafield mmmfd_item_userexit.
mmpur_message 'E' 'ZMM02' '050'
'Intraplant STO :' '' '' ''.
else.
"To erase message
mmpur_metafield mmmfd_item_userexit .
mmpur_remove_messages_by_id tekpo-id.
ENDIF.
its working for one line item, if more then one line item you need to verify it.
ENJOY SAP

I was trying to move my photos from the iPhoto library to an external hard drive. I now have a desktop display of thousands of cascading photos. How do I remove them from my desktop screen?

I was trying to move my photos from the iPhoto library to an external hard drive. I now have a desktop display of thousands of cascading photos. How do I remove them from my desktop screen?

Strangely enough we can not see you so it really helps if you share with use exactly what you have, exactly what you did and details about the problem
what version of iPhoto and of the OS? What exact steps did you do? where are you seeing these "thousands of cascading photos" now and using what software and what exactly did you want to accomplish
The correct way to move your iphoto library to an external drive is to verify the drive is formatted Mac OS extended (journal) and then drag the iphotl library intact as a single entity to is
The correct way to move some or all of your photos is to select them in iphoto and export 9file menu ==> export -- https://discussions.apple.com/docs/DOC-4921 ) to the external drive
LN

How to remove items from iPad home screen?

How to remove items from iPad home screen?

Press and hold any of the apps and after a couple of seconds or so they should start to shake. Then press the 'x' in the left corner to delete the ones that you don't want, and when you've finished deleting press the home button so as to stop the shaking. If you don't get the 'x' on any of the apps that you've downloaded (you can't delete built-in apps) then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'

To remove error from error message screen in ME21N

Hi all,
I have a strange problem may be not to you guys,
well i am showing an error message in ME21N on certain condition in EXIT 'EXIT_SAPMM06E_012' this is working fine i am using simple stmt Message e(MSGno) text-01, but when i correct the problematic part and again want to save my data it is aloowing me to save data but my error message(In red) still remains there if i see in EDIT ( of faulty messages pop-up window). Can any body know if we have to remove error message manually in case our program satify the condition.
if yes what portion i m missing to delete the error message.
any reply will be highy appreciated n offcourse points for sure
thanks a lot.
regards
Mandy

Well we can remove message from message text tray using pre-defined macros to erase message.its like
IF SY-SUBRC NE 0.
IF NOT tekpo-id IS INITIAL.
   "This is to remove error message later on
   "if problem corrected.
    mmpur_business_obj_id tekpo-id.
ENDIF.
   mmpur_metafield mmmfd_item_userexit.
mmpur_message 'E' 'ZMM02' '050'
              'Intraplant STO :' '' '' ''.
else.
"To erase message
   mmpur_metafield mmmfd_item_userexit    .
   mmpur_remove_messages_by_id tekpo-id.
ENDIF.
its working for one line item, if more then one line item you need to verify it.
Mandy

Removing Shortcuts from my home screen/page.

How do I remove shortcuts from my home screen? I added a few by mistake How do I get them off my home screen? I don't want to uninstall them, I just want the shortcutt off my home scree/page.

Glad it worked. I came back to give you a link to Android's manual which will tell you other tips and tricks for using your phone's operating system. You can view it in pdf form here or html with hyperlinks here.

How do I remove lines from linked text?

I am using Dreamweaver CS 4 and linked images and text are automatically underlined. How do I remove the underlines from linked text?
https://www.adobe.com/support/dreamweaver/layout/link_underline/#72192
According to the Adobe page above, I can add this code to the “head’ area of my html page and then all my links will not have visible lines, but I did that and the lines are still there. Any ideas why?
<style type="text/css">

</style>

Hello,
in my DW I can define this in the (translated from my german DW) page properties, see screenshot
Have a look at Hyperlinks (CSS) >>> Unterstreichungsstil (underlining style) >>> use dropdown menu output >>> never underline (nie unterstreichen)
Hans-Günter

How can I remove things from the home screen

How can I remove things from the iPad home screen?

Hold down an icon until all icons start to wiggle.
You then have two choices:
1. Drag the icon to the right so it goes to a different (non-home) screen.
2. If the icon is not supplied by Apple as part of iOS, you will see a small "X" in the upper left corner. You can click that to delete the icon.
Stop the wiggling by pressing the home button.

Remove Underline From Link Text

I use GoLive 5.0 - still works great and suits my capabilities.
However, I cannot figure out how to remove the underline from the text of a link (as one of my clients has requested) - and have the text continue to function as a link.
Can anyone suggest how to accomplish this?

Thanks for the tip. It took some canoodling, but I got it to work. You can see the results at www.freeblues4u.com
For your reference, here is the method to eliminate underlines on link text for an entire page in GoLive 5.0:
In Layout click the CSS icon at the right of the header - on the resultant Style Sheet, right click and select "Add Selector" - Choose "a" - In the CSS Selector Inspector window, select the "F" Tab and select "none" in the Decoration menu - Preview and save the Page.
Thanks Again
Lee Vyborny
tropicalglen.com and CountryRoutes.net

How to remove paint from my macbook screen

Hi My roommate was doing some painting and my MacBook was on the coffee table and now I have flecks of paint on my screen. What is the safest way to remove it without damaging the screen?

Try Goof-Off or Methyl Ethyl Keytone (MEK) both which dissolve water based paint (latex wall paints) and evaporate very quickly, however when it dries if it's on the screen again then it will dry there. So you need to wipe off with clean areas of a cloth quickly to transfer the paint to the cloth and not back onto the screen.
Since both are extremely powerful solvents, it's highly advised to test using a cotton swab on a lower corner someplace small and allow to dry, hold at a angle to see if it will damage the screen.
If it's small tiny flecks like spots, you may use a plastic credit card or plastic paint scraper and lightly pass over the screen and chip them off.
Oil based paints are a different matter, I'm assuming here the walls were painted to get that sort of splatter on the screen.

I need help removing bezel from my laptop screen

I have a HP Pavilion DV4-1125nr laptop and I cracked the screen and need to change it but I can't seem to figure out on how to remove the bezel out of my screen so I can remove screen and get the model number from the back. I removed screens before but they had screws on top of bezel covered by little rubber knobs and the dv4-1125nr doesn't have any of this and it looks like you have to remove the bezel using your hands but I can only pop out the top and the sides, the bottom doesn't pop out and I'm afraid to force it out in case I break it. What am I misssing here? Is there a trick to get it out?

http://h20574.www2.hp.com/?jumpid=reg_R1002_USEN&lang=en&cc=US&hpappid=psml
From above url ( HP partner Services Media Library ), do the following;
1. Select Laptops and Teblet PCs in "Product Category"
2. Select HP Pavilion Notebook PCs in "Product Family"
3. Select Pavilion dv4-1000 Entertainment Notebook PC series in "Product Series"
4. Select either FRU Remove/Replace (AMD) or FRU Remove/Replace (Intel) based on your CPU type.
5. It should bring up another window "HP Service Media Library" and then select Display Bezel ( Recessed ) to bring up the video and detailed procedure for you to open up the LCD Display Bezel.
Have fun and keep this URL handy and you can use it for all your DIY works later.

Remove option from variable entry screen

Hi all,
I have to remove some option from the variable entry screen as the user dont required that...
How to remove that?
please let me know step by step....

Hi,
Do you want to remove some values for the variable and wish to show only few values which the user will select and fill in the variable screen or you want to change the no.of variables displayed in the variable screen and show only few variables?
If you want to do the first,
Restrict the values for that variable in the Query itself(in Query Designer) which can be done as follows...
Create a variable for a Characteristic and add it under "Default Values",then restrict the values for that variable.Now this will allow you to select the restricted values through the variable screen.
If you want to do the second,
Go to Personalized settings,and personalize the variables.You can also Modify the selection of values there as well.
Now you can show only the required variables in the variable screen.
If you want to create a variant(Global/Local) for the variables,that is also possible thorugh vairable screen.
Hope this helps you!
Rgds,
Murali

Removing data from a text file

hi
i am trying to create a mehod which will take the values from two combo boxes
, search through two text files in order to retrive the values, and then delete them from the file
i am trying to use the following code to achieve this
public void ReturnBook(){
     inFile1 = new BufferedReader(
     new FileReader(MemberIssueFile));
     inFile2 = new BufferedReader(
     new FileReader(BookIssueFile));
     outFile1 = new PrintWriter(
     new FileWriter(BookIssueFile),true);
     outFile2 = new PrintWriter(
     new FileWriter(MemberIssueFile),true);
     for(int a=0; a<MemberIssueFile.length(); a++) {
                                   if((((String)BookCombo.getSelectedItem()).equals((String)BookIssueFile.get(a)))
                                   &&(((String)MemberCombo.getSelectedItem()).equals((String)MemberIssueFile.get(a))))
                              MemberIssueFile.remove(a);
                              BookIssueFile.remove(a);
}but i am getting the following compiler error
cannot resolve symbol
symbol : method get (int)
location: class java.io.File
                                   if((((String)BookCombo.getSelectedItem()).equals((String)BookIssueFile.get(a)))
^
and
cannot resolve symbol
symbol : method remove (int)
location: class java.io.File
                              BookIssueFile.remove(a);
can anyone please show me where i am going wrong

This error may occur when a method is called incorrectly: either its name is misspelled (or upper-lower case is misplaced), or a method is called with wrong types of arguments, or a method is called for a wrong type of object or a wrong class. For example, the same error, will be reported if you write
System.println("Hello");
instead of
System.out.println("Hello");

Remove color from link text

How do I remove the color from text that is a link to another page?
Here is my script:
a:link {
    text-decoration: none;
a:visited {
    text-decoration: none;
a:hover {
    text-decoration: underline;
a:active {
    text-decoration: none;
But, it still looks like this:

If you want to change the colors of the links, you need to change them in your css:
a:link {
text-decoration: none;
color: #ffffff /* this makes it white on any link */
a:visited {
text-decoration: none;
color: #ffffff /* this is also white for any visited link */
a:hover {
text-decoration: underline;
color: #ffffff /*this link is white, but when you hover over it, the underline shows up */
a:active {
text-decoration: none;
color: #fffff /*another white link that is the active link */
I thnk that is what you are trying to do as you stated you wanted the links to change. If you don't do that the links will be the default colors
Blue for link, purple for the visited, etc.
Jim
Added later: This will change all your links on the page using the css. You can do it like fixated247 said above if that's what you want, if you only want it to change in the menu (which I cannot see, it's not there on the above linked page) you need to select the div or class that is using it.
/*if the link is in the menubar div then make a different selector for each of the link, visited, hover and active, in that order */
#menubar a:link     {
text-decoration:none;
color:#ffffff;
etc. I hope you understand what I am trying to say.
Jim

How to remove buttons from a selection-screen as window.

Hello SAPients.
I'm using CALL SELECTION-SCREEN 100 STARTING AT 10 10 to call a previously created selection-screen. The window shows 4 buttons: Execute, Check input, Save as variant and Cancel. The user is asking to remove the Check input and Save as variant buttons. Is that possible? I've been searching and I can't find a way to remove those 2 buttons.
Thank you in advance for your help.

Hello Ric,
The buttons must be defined in GUI status right?
So you must be calling the 'set pf-status' command?
Modify this statement.
suppose the function code for check input is 'CHECK' and save variant is 'SAVE'.
TYPES: BEGIN OF TAB_TYPE,
        FCODE LIKE RSMPE-FUNC,
      END OF TAB_TYPE.
DATA: TAB TYPE STANDARD TABLE OF TAB_TYPE WITH
               NON-UNIQUE DEFAULT KEY INITIAL SIZE 10,
      WA_TAB TYPE TAB_TYPE.
CLEAR TAB.
MOVE 'CHECK'TO WA_TAB-FCODE.
APPEND WA_TAB TO TAB.
MOVE 'SAVE' TO WA_TAB-FCODE.
APPEND WA_TAB TO TAB.
SET PF-STATUS 'STAT' EXCLUDING TAB.
Thanks,
Susmitha
Dont forget to reward points for useful answers

Remove Starbucks from my Text Screen

Similar Messages

Maybe you are looking for