Remove Subsequence Headings From XML Report

I've modified the default stylesheet to remove a lot of the fluff added in the test report. However, I'm stuck trying to remove the subsequence headings from the report. Can anyone with stylesheet experience give me some advice?
I can't modify TestStand reporting at all, only the stylesheet.
I've attached a picure which hopefully should help expain the problem.
Thanks,
-Jeremy
Attachments:
FormattingExample.png ‏22 KB

Hello Jeremy,
This white paper discusses how to exclude results from reports using filtering. I imagine you could create a filter based on the step values.
Haley N
Applications Engineer
National Instruments

Similar Messages

Remove Reschedule jobs from Developer Reports Sever 6i

Dear All,
Please guide me how i can remove reschedule jobs from Developer Reports 6i
Regards
USMAN ALI

Install Forms in one directory (You can have reports in the same
directory).
Install oracle DB in another directory.
Don't change any file and reboot.
The listener will start automatically as a service.
(If not from a command line write "lsnrctl start" to start it).
To connect from forms/report to the DB you need to activate the
sqlnet easy config tool from the directory where forms is.
Follow the wizard to define an entry in the tnsnames.ora file
automatically.
Then you can use your forms with the DB.
(IF you get problems it usually helps to let us know the error
code you get so we can direct you in the correct direction).

How to remove an Element from XML by confirming Attribute of that element

Hi guys
I have an XML file where i have all users DB. Now i want to remove a user from that XML file. I want to check an user id attribute which is uniqe with existing users in XML file, if its the same user then delete this user from XML file and save the changes in XML file.
here is my XML file:
<?xml version="1.0" encoding="UTF-8"?>
<users>
<user id="zahid" password="X8UrUN79avT27LYwUESiliAV328=" name="Zahid Nawaz" phone="9599808" email="[email protected]" role="Tnr+vPuuAAsix8heVWD4mioCgLQ=" />
<user id="Admin" name="alpha beta" password="fEqNCco3Yq9h5ZUglD3CZJT4lBs=" phone="456782656" email="[email protected]" role="Tnr+vPuuAAsix8heVWD4mioCgLQ=" />
<user id="Guest" name="beta alpha" password="+ml3yZuAnbaOHFaIjsOL0ARxmzk=" phone="8765432" email="[email protected]" role="+s6D7jAUvcj5ggPMlOLokiJFLpA=" /><user id="Guest1" name="unknown unknown" password="+ml3yZuAnbaOHFaIjsOL0ARxmzk=" phone="123122112" email="[email protected]" role="+s6D7jAUvcj5ggPMlOLokiJFLpA=" />
</users>for example i want to delete a user which have user id= Guest.
How can i do it in Java. Any code example please. i am using JDOM document and SAXBuilder for parsing.
Waiting for your replay.
Thanks in Advance
Best regard

Hi,
Till now i tried the following code which give null pointer exception at following line
element.getParentNode().removeChild(element);
     public String removeUserByID(String id) throws Exception{
               DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
             DocumentBuilder builder = factory.newDocumentBuilder();
             TransformerFactory tFactory = TransformerFactory.newInstance();
             Transformer tFormer = tFactory.newTransformer();
               doc = builder.parse(usersXml);
             Element element = (Element)doc.getElementsByTagName("user id="+id).item(0);
//             Remove the node
             element.getParentNode().removeChild(element);
//             Normalize the DOM tree to combine all adjacent nodes
             doc.normalize();
             FileOutputStream fos = new FileOutputStream(this.usersXml);
               XMLOutputter out = new XMLOutputter();
               out.output(((org.jdom.Document)doc), fos);
          /*     Source source = new DOMSource(doc);
             Result dest = new StreamResult(System.out);
             tFormer.transform(source, dest);
             System.out.println();
             return "true";
          if following line i m trying to use first attribute of my XML file where i am passing a string which is for example like "user id=Guest". id is a string which have user Id "Guest".
Element element = (Element)doc.getElementsByTagName("user id="+id).item(0);So any suggestion??Whats wrong here?
Best regards and thanks again 4 ur reply.

How to remove default comment from XML output

Hi,
I have a requirement to generate the XML report with XML output(Not PDF). Everything is working fine except I am getting one comment line " which is not required and I want to remove this line. This report will be run through Oracle Apps 11i.
Thanks.

Hi,
There is option to change the "Prolog Value" but nothing is there to remove the comment.
Thanks

How to remove empty lines from xml files after removing nodes from document

<pre>
Hi
<b>i have xml document, which is shown below
after removing some nodes from the document ,i am getting empty lines in place of removed nodes,how to resolve this and get the proper xml document without any errors</b>
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE Message SYSTEM "TRD01.dtd">
<Message>
<Header>
<CounterPartyType>CLIENT</CounterPartyType>
<CreationTime>20134455</CreationTime>
<ErrorCode>363 </ErrorCode>
<ErrorEnterPriseId>N</ErrorEnterPriseId>
<ErrorStatus>1</ErrorStatus>
<ErrorSystemId>STL</ErrorSystemId>
<ErrorTimes>31</ErrorTimes>
<MessageType>T</MessageType>
<RecipientEnterpriseId>N</RecipientEnterpriseId>
<RecipentSystemId>EXM</RecipentSystemId>
<Remarks>REMARSK</Remarks>
<SenderEnterpriseId>N</SenderEnterpriseId>
<SenderSystemId>TR</SenderSystemId>
</Header>
</Message>
<ErrorCode>363 </ErrorCode>
<ErrorEnterPriseId>NIHK</ErrorEnterPriseId>
<ErrorStatus>1</ErrorStatus>
<ErrorSystemId>STL</ErrorSystemId>
<ErrorTimes>31</ErrorTimes>
XPathExpression expression5 = xpath.compile(xmlpath5);
Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
Node node5 = (Node) result5;
node5.getParentNode().removeChild(node5);
XPathExpression expression6 = xpath.compile(xmlpath6);
Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
Node node6=(Node) result6;
node6.getParentNode().removeChild(node6);
XPathExpression expression7 = xpath.compile(xmlpath7);
Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
Node node7=(Node) result7;
node7.getParentNode().removeChild(node7);
doc.normalize();
doc.normalizeDocument();
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
t.setOutputProperty(OutputKeys.METHOD,"xml");
t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
the xml output i am getting is
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Message>
<Header>
<CounterPartyType>CLIENT</CounterPartyType>
<CreationTime>20134455</CreationTime>
<MessageType>TRD01</MessageType>
<RecipientEnterpriseId>N</RecipientEnterpriseId>
<RecipentSystemId>STL</RecipentSystemId>
<Remarks>REMARSK</Remarks>
<SenderEnterpriseId>N</SenderEnterpriseId>
<SenderSystemId>T</SenderSystemId>
</Header>
</Message>
<b>could you please let me know how to avoid empty lines in the xml doucment output</b>
this is the method i am using to get the result
public void ValidateRecord(String xml){
try{
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder db = factory.newDocumentBuilder();
//parse file into DOM
/*DOMParser parser = new DOMParser();
parser.setErrorStream(System.err);
parser.setValidationMode(DTD_validation);
parser.showWarnings(true);*/
System.out.println ("HI THIS xml is validation "+xml);
Resolver res = new Resolver();
db.setEntityResolver(res);
Document doc = db.parse(new InputSource(new StringReader(xml)));
XPathFactory xpf = XPathFactory.newInstance();
XPath xpath = xpf.newXPath();
// XPathExpression expression = xpath.compile("//A/B[C/E/text()=13]");
String xmlpath="/Message/Header/CounterPartyType/text()";
String xmlpath1="/Message/Header/RecipentSystemId/text()";
String xmlpath2="/Message/Header/ErrorSystemId/text()";
XPathExpression expression = xpath.compile(xmlpath);
XPathExpression expression1 = xpath.compile(xmlpath2);
Object result = expression.evaluate(doc, XPathConstants.NODE);
Object result1 = expression1.evaluate(doc, XPathConstants.NODE);
Node node = (Node) result;
Node node1 = (Node) result1;
System.out.println("the values of the string is " +node.getNodeValue());
System.out.println("the values of the string is " +node1.getNodeValue());
// for (int i = 0; i < nodes.getLength(); i++) {
//System.out.println(nodes.item(i).getNodeValue());
// CAHNGING THE RECEIPENT NODE
XPathExpression expression2 = xpath.compile(xmlpath1);
Object result2 = expression2.evaluate(doc, XPathConstants.NODE);
Node node2 = (Node) result2;
System.out.println(node2);
node2.setNodeValue(node1.getNodeValue());
System.out.println(node2);
//removing the nodes from document
String xmlpath3="/Message/Header/ErrorCode";
String xmlpath4="/Message/Header/ErrorEnterPriseId";
String xmlpath5="/Message/Header/ErrorStatus";
String xmlpath6="/Message/Header/ErrorSystemId";
String xmlpath7="/Message/Header/ErrorTimes";
XPathExpression expression3 = xpath.compile(xmlpath3);
Object result3 = expression3.evaluate(doc, XPathConstants.NODE);
Node node3 = (Node) result3;
node3.getParentNode().removeChild(node3);
XPathExpression expression4 = xpath.compile(xmlpath4);
Object result4 = expression4.evaluate(doc, XPathConstants.NODE);
Node node4 = (Node) result4;
System.out.println("node value");
System.out.println(node4.getParentNode().getNodeName());
node4.getParentNode().removeChild(node4);
XPathExpression expression5 = xpath.compile(xmlpath5);
Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
Node node5 = (Node) result5;
node5.getParentNode().removeChild(node5);
XPathExpression expression6 = xpath.compile(xmlpath6);
Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
Node node6=(Node) result6;
node6.getParentNode().removeChild(node6);
XPathExpression expression7 = xpath.compile(xmlpath7);
Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
Node node7=(Node) result7;
node7.getParentNode().removeChild(node7);
// Node b13Node = (Node) expression.evaluate(doc, XPathConstants.NODE);
//b13Node.getParentNode().removeChild(b13Node);
doc.normalize();
doc.normalizeDocument();
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
t.setOutputProperty(OutputKeys.METHOD,"xml");
t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
t.transform(new DOMSource(doc), new StreamResult(System.out));
catch (Exception e) {
e.printStackTrace();
System.out.println(e.getMessage());
</pre>
Edited by: user12185243 on Apr 6, 2013 6:38 AM
Edited by: user12185243 on Apr 6, 2013 6:41 AM
Edited by: user12185243 on Apr 6, 2013 6:43 AM
Edited by: user12185243 on Apr 6, 2013 6:45 AM
Edited by: user12185243 on Apr 6, 2013 9:00 AM

either this way we can do this
1)
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
<b> factory.setIgnoringElementContentWhitespace(true); </b>
DocumentBuilder db = factory.newDocumentBuilder();
or
2)
java.io.StringWriter sw = new java.io.StringWriter();
StreamResult sr = new StreamResult(sw);
t.transform(new DOMSource(doc), sr);
String xml1 = sw.toString().trim();
<b> xml1=xml1.replaceAll("\\s",""); </b>
System.out.println(xml1.trim());

How to remove elements/attributes from XML using Xpath in XSLT ??

Hello ,
Is there anyway or method of Xpath from which I can delete the elements and attributes from XML at runtime ??
Like I have such XML and I have to remove per attribute highlighted below
<person per="and">
<e:emp a="ir" b="ad" >
</e:emp>
</person>
And want a result like this
<person>
<e:emp a="ir" b="ad" >
</e:emp>
</person>
Thanks

To achieve this you can use the bpelx:remove function: http://download.oracle.com/docs/cd/E12483_01/integrate.1013/b28981/manipdoc.htm#CIHJBJFD
your assign will look like:
<bpel:assign>
<bpelx:remove>
<target variable="person" query="/person/@per" />
</bpelx:remove>
</bpel:assign>
Regards,
Melvin

PDF GENERTION FROM XML REPORT

Hi , All
i have got one problem....
i created XML report using Oracle Report Builder 6i( Developer2000) to dynamically change the report layout.
but i can`t generate PDF file from it, as well as i can`t generate HTML,HTML style sheet,RIF,PostScript,Delimited & XML file too.
Please help me out.........
Thanks & Regards
Dushyant.

Hi , All
i have got one problem....
i created XML report using Oracle Report Builder 6i( Developer2000) to dynamically change the report layout.
but i can`t generate PDF file from it, as well as i can`t generate HTML,HTML style sheet,RIF,PostScript,Delimited & XML file too.
Please help me out.........
Thanks & Regards
Dushyant.

Removing Incorrect data from .xml files

How do I remove info in the .xml files.
When I 1st got my kit it read my fastest km as 4.55mins/km
This is way too fast as my average is 6.00mins/km.
Because the info is incorrect I am not getting congratulated by Paula or being able to improve slowly as I will never get to 4.55.
HELP

Haplogroup k,
I think you have understood me. The file was created
when the unit wasn't callibrated and recorded a false
reading which was way too fast for me and a lot of
runners also.
I want to post best results now that the machine
works right.
Most people have said that they were amazed by how accurate the Nike+ was right from the box without calibration. But I'll take your word for it.
I can get to the .xml files but it won't delete
records, that's all I want to do.
I don't know what you mean by "it won't delete records." Are you talking about your Personal Bests? No you cannot edit that fle. But you can delete a run from your Nano.
However, you can save all your run data to your computer hard-drive, then RESTORE your Nano. But that will also wipe your calibration data and everything else (personal bests). I guess you could then recalibrate before doing any runs. Then put your old run data (your old xml files) back in your "latest" folder.

Removing Default Namespaces from XML

Hi All,
I am having a situation where I can't remove the default
namespace from XML mainly
because there is no namespace prefix.
I hope this code snipped makes better sense.
function test():void
document:XML =
<test xmlns:soap="
http://example.com" xmlns="
http://swanmokshi.com">
<item>peter</item>
<item>jenny</item>
<item>JK Angel</item>
<test>
// I can remove the soap namespace by doing the following
soap:Namespace = document.namespace("soap");
document.removeNamespace(soap).
Alert.show(document.toXMLString()); // should now display
the xml document without the soap namespace
Note that removing the soap namespace is easy because of the
first namespace is named "soap". How do
I removed the unnamed namespace, xmlns="
http://swanmokshi.com" ?
regards,
Arun

Same problem for me.
XPath expression failed to execute. Error while processing xpath expression, the expression is "ora:processXSLT("Transformation_2.xsl", bpws:getVariableData("PartyID", "Header"))", the reason is Character reference "&#24" is an invalid XML character.. Please verify the xpath query.
I am getting the date from Oracle Advanced Queue

Database filling from XML report of TS3

Does NI have a tool to fill-up an Oracle database from a XML report of TS3? The idea is to fill up the database during the night.

I can't answer your question about NI having a tool, but we are facing a similar problem so I will share some of our ideas.
1. You could write your own XML parser that would read the file and load it into the database. Since it is a standard format, you should be able to find software that will make the parsing relatively easy.
2. You could load the file directly into an Oracle 9i database, passing it as a LOB parameter. You would need to write the code for loading the file (examples can be found on the internet) and you would probably need an Oracle expert to implement the XML parsing on the database side.
3. You could save the results container as a file, then later load the file into TestStand and use the standard database logging sequence. We tried a
dding the results container to StationGlobals, but have had problems saving all the data to disk.
4. You could modify the text report so that it creates the SQL statements required to enter your data into the database. Then the file can be loaded into the database as "dynamic SQL".
5. You could log the data to a local database, then later load it into the main database, as suggested by Dennis (http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000E13B0000&UCATEGORY_0=_8_&UCATEGORY_S=0).

Remove Filter Type from interactive report

Hi
is it possible to remove the Filter Type option from an interactive report?
We don't want to give users the option to select the filter type.
Many thanks
Paul

Hi Paul,
I don't think you can remove that option. You can hide it. There are several ways to do this, but they would involve css styling. In your page's HTML Header setting, add in:
<style type="text/css">
label[for="apexir_FILTER_TYPE"] {display:none}
#apexir_FILTER_TYPE.radio_group {display:none}
</style>Note that older versions of IE will not handle the first style, but that's just the label. The actual radio buttons are hidden by the second style
Andy

Remove Printer Name from Crystal Report

How can i remove the printer name from the Crystal Report so that the PrinterName property of the CRAXDRT.Report object in the RDC SDK is blank WITHOUT having the "No Printer" Option checkbox checked?
Here's the scenerio. When I first create a Report and don't go into Page Setup, PrinterName property is blank. If I go into Page Setup and explicitly select a printer, PrinterName property equals the name of the printer selected. If I check the "No Printer" checkbox in Page Setup, PrinterName property is blank. But if i go back in and uncheck the "No Printer" checkbox in Page Setup, the PrinterName property equals the name of my Windows Default Printer.

I'm still not sure what is unclear about my first question. And I'm not sure how any of the info you are requesting is going to make any difference in answering my question. And I'm not sure how your analogy fits here but ..
Version of CR = 11.0.0.895
CR Service Packs applied = None
Web or Win app? = Win App
OS? = Windows XP Service Pack 3
Development language? = Both Visual Basic 6 and C#.Net 2008
Method of CR files deployment = email the .RPT file to a client
Where were the runtime files downloaded from? = Runtimes are installed from Merge Modules donwload from SAP site
What is the version of the craxdrt.dll on the deployed box? = 11.0.0.893
So here are the exact steps so you can understand what is going on:
I have the Crystal Reports Application open side-by-side with my Visual Basic development environment in debug mode so i can step through the code using the RDC SDK.
1. I open the Crystal Reports Application and create a brand new report - "Test.RPT" and DO NOT go into Page Setup at all and save the report.
2. In my Visual Basic development environment, i run the code that will generate the report, Here's the exact code
    Dim m_crApp As CRAXDRT.Application
    Dim m_crReport As CRAXDRT.Report
    Set m_crApp = New CRAXDRT.Application
    Set m_crReport = New CRAXDRT.Report
    Set m_crReport = m_crApp.OpenReport("Test.RPT")
3. When i look at the PrinterName property in the CRAXDRT.Report object, it is blank.
    ie. crReport.PrinterName is equal to ""
4. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and check the "No Printer" option.
5. I go back into my Visual Basic development environment and rerun the code that will generate the report.
6. When i look at the PrinterName property in the CRAXDRT.Report object, it is still blank.
    ie. crReport.PrinterName is equal to ""
7. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and uncheck the "No Printer" option. I have NOT specified any printer, nor have i clicked the "Printer..." button to setup a printer....i have just unchecked the "No Printer" option
8. I go back into my Visual Basic development environment and rerun the code that will generate the report.
9. When i look at the PrinterName property in the CRAXDRT.Report object, it is now set to my WINDOWS DEFAULT PRINTER, yet i had not specified any printer.
    ie. crReport.PrinterName is equal to "
MyNetwork\MyPrinter"
PROBLEMS:
1. The client needs the report to go to the default windows printer of their machine
2. If the "No Printer" Option is checked, the Report does not print at all
3. If the report is set to MY default windows printer and i give it to the client, at times it takes upwards of to a minute for the Print Dialog to disply. As i've read on other forum posts, it appears Crystal is looking for MY printer on the clients machine and takes a minute before i realizes it can't find it and then sets it to the CLIENTS default windows printer.
4. The client believes it is unreasonable to wait a minute for the print dialog to appear ...and i agree.
5. I cannot change the code to use the Select Printer in the RDC SDK - it's a long explanation why but just suffice it to say that i cannot do this.
All i want to do is either:
1. Remove the Printer Name in the actual report from the Crystal Reports designer - basically undoing what Crystal did when i went into Page Setup.
2. Via the RDC SDK, be able to detect the "No Printer" option is selected. Checkign CRAXDRT.PrinterName equal to "" is not an option.

How to remove the prolog from XML in Oracle?

Our system works like this:
1. Pass in a piece of XML to the database as a CLOB
2. Database converts this to XMLTYPE (stored as a CLOB (you can skip over this, Marco *{;-) ))
3. An application then reads the XML from the database and inserts it into another bit of XML
4. The application continues its processing based on this new composite XML.
Up until now, the XML loaded into the database in step 1 (by various systems) has never contained a prolog. However, a new system has come along and is now passing in a prolog. This causes problems for the application in step 3.
Aside from trying to get the new system to not pass in the prolog, is there a way to remove it from within Oracle?
The two solutions I've come up with don't feel elegant:
1. Use XMLTABLE to extract the main root node (which could be different, depending on which system sent in the data, and could change)
2. Convert the prolog into a comment, using REPLACE, before converting the CLOB into an XMLTYPE.
If I was forced to use one of these methods, I'd go with 2, but I really, really hope there's a better way of doing it.
Has anyone got any other suggestions, please?
PS. We're currently on 10.2.0.4 and are shortly about to move to 11.2.0.3, but the solution has to work on both versions, for added fun and excitement!

This is the error the application gives: "Error obtaining Additional Info SAX Exception : No processing instruction starts with 'xml'" which the app dev says is due to the presence of the prolog in the middle of the xml the app has build up.So basically, the app just "pastes" the XML in the middle of another without caring about the structure? What kind of design is that?
IMO, the app has to be fixed, not the input XML.
Plenty about how to add the prolog, nothing about how to remove it!You can use XMLQuery function to extract the root element :
SQL> create table tmp_xml3 of xmltype
2 xmltype store as basicfile clob;
Table created
SQL> insert into tmp_xml3 values (xmltype('<?xml version="1.0" encoding="UTF-8"?><root/>'));
1 row inserted
SQL> select * from tmp_xml3;
SYS_NC_ROWINFO$
<?xml version="1.0" encoding="UTF-8"?><root/>
SQL>
SQL> select xmlquery('*' passing object_value returning content)
2 from tmp_xml3;
XMLQUERY('*'PASSINGOBJECT_VALU
<root/>
Edited by: odie_63 on 22 août 2012 15:26

Remove an element from XML present in CLOB column

Hi,
I need to remove element TEST2 and TEST3 from the below XML which is present in the CLOB column of a table. I need to do this using DBMS_XMLDOM package of Oracle as my existing code is using the same -
<ROOT>
<LEAF1>
<TEST1>TEXT1</TEST1>
<TEST2>TEXT2</TEST2>
<TEST3>TEXT3</TEST3>
</LEAF1>
</ROOT>
Hence the final o/p should be like
<ROOT>
<LEAF1>
<TEST1>TEXT1</TEST1>
</LEAF1>
</ROOT>
Please suggest how to achieve this.

Something like this?
Anton
declare
t_doc dbms_xmldom.DOMDocument;
t_root dbms_xmldom.DOMNode;
t_node dbms_xmldom.DOMNode;
t_buf varchar2(1000);
begin
t_doc := dbms_xmldom.newDOMDocument( xmltype( '<ROOT>
<LEAF1>
<TEST1>TEXT1</TEST1>
<TEST2>TEXT2</TEST2>
<TEST3>TEXT3</TEST3>
</LEAF1>
</ROOT>' ) );
t_root := dbms_xmldom.makeNode( t_doc );
t_node := dbms_xmldom.removeChild( t_root, dbms_xslprocessor.selectSingleNode( t_root, '/ROOT/LEAF1/TEST2' ) );
t_node := dbms_xmldom.removeChild( t_root, dbms_xslprocessor.selectSingleNode( t_root, '/ROOT/LEAF1/TEST3' ) );
dbms_xmldom.writetoBuffer( t_root, t_buf );
dbms_output.put_line( t_buf );
end;

How to remove white spaces from XML content using Coldfusion?

Hi,
Can anybody help me in removing white spaces in between the tags from the below XML content using coldfusion?
XML content:
<?xml version="1.0" encoding="UTF-8"?> <chart showdates="true" today="08/12/2009"> <phases> <phase color="CCFFCC" name="Funded"/> <phase color="CDCD67" name="Concept"/> <phase color="99CCFF" name="Feasibility"/> <phase color="0099FF" name="Development"/> <phase color="0099FF" name="Development"/> <phase color="CC99FF" name="Close-out"/> <phase color="909090" name="Sustaining"/> </phases><program name=""> <project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "> <version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "> <phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/> <phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/> <phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/> <phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/> <phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/> </version> </project> </program> </chart>
Output I am expecting is like below,
<?xml version="1.0" encoding="UTF-8"?><chart showdates="true" today="08/12/2009"><phases><phase color="CCFFCC" name="Funded"/><phase color="CDCD67" name="Concept"/><phase color="99CCFF" name="Feasibility"/><phase color="0099FF" name="Development"/><phase color="0099FF" name="Development"/><phase color="CC99FF" name="Close-out"/><phase color="909090" name="Sustaining"/></phases><program name=""><project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "><version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "><phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/><phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/><phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/><phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/><phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/></version> </project></program></chart>
Thanks in advance,
Regards,
Manoz.

Daverms,
Thanks for the quick turn around..
I have applied the solution what you suggested above (<cfprocessingdrirective suppresswhitespaces="yes"), still whitespaces are existing in my output.
The output what I am getting is,
(blue color part is my output & red color indicates whitespaces)
<?xml version="1.0" encoding="UTF-8"?>
<chart showdates="true" today="09/12/2009">
<phases>
<phase color="CCFFCC" name="Funded"/>
<phase color="CDCD67" name="Concept"/>
<phase color="99CCFF" name="Feasibility"/>
<phase color="0099FF" name="Development"/>
<phase color="0099FF" name="Development"/>
<phase color="CC99FF" name="Close-out"/>
<phase color="909090" name="Sustaining"/>
</phases>
<program name="">
<project enddate=" 01/01/2010 " id="12059" startdate=" 20/06/2003 ">
<version enddate=" 01/01/2010 " number=" 1" startdate=" 20/06/2003 ">
        <phase color="CCFFCC" currentdate="20/06/2003" name="Project Start" plandate="20/06/2003" type="phase"/>
        <phase color="CDCD67" currentdate="" name="Concept Closure" plandate="" type="phase"/>
        <phase color="99CCFF" currentdate="20/06/2003" name="Feasibility Closure" plandate="20/06/2003" type="phase"/>
        <phase color="F0FF00" currentdate="" name="Alpha Test" plandate="" type="milestone"/>
        <phase color="F0FF00" currentdate="26/07/2004" name="Beta Test" plandate="31/05/2004" type="milestone"/>
        <phase color="0099FF" currentdate="29/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="24/02/2006" name="Project Closed" plandate="01/01/2010" type="phase"/>
        </version>
<subproject enddate=" 16/10/2008 " id="11809" name="espWatcher Pricing Toolkit" startdate=" 01/08/2003 ">
<version enddate=" 16/10/2008 " number=" 1" startdate=" 01/08/2003 ">
        <phase color="CCFFCC" currentdate="01/08/2003" name="Project Start" plandate="01/08/2003" type="phase"/>
        <phase color="99CCFF" currentdate="" name="Feasibility Closure" plandate="" type="phase"/>
        <phase color="0099FF" currentdate="15/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="16/10/2008" name="Project Closed" plandate="16/10/2008" type="phase"/>
        </version>
</subproject>
<subproject enddate=" 31/12/2070 " id="35704" name="espWatcher version 2 (2005)" startdate=" 01/01/2005 ">
<version enddate=" 31/12/2070 " number=" 1" startdate=" 01/01/2005 ">
        <phase color="CCFFCC" currentdate="01/01/2005" name="Project Start" plandate="01/01/2005" type="phase"/>
        <phase color="99CCFF" currentdate="01/07/2005" name="Feasibility Closure" plandate="01/07/2005" type="phase"/>
        <phase color="0099FF" currentdate="31/03/2006" name="Commercialization" plandate="31/03/2006" type="phase"/>
        <phase color="CC99FF" currentdate="31/12/2070" name="Project Closed" plandate="31/12/2070" type="phase"/>
        </version>
</subproject>
</project>
</program>
</chart>
However this solution removes most of the whitespaces, I want exact output as flash file is expecting so..
Where ever I am calling the CF functions, there I am getting the whitespaces. like below cases.
startdate="#getProjectStartDate(sProjectIdList)#" -> output I am getting for this statement is -> " 12/09/2009 "
Please assist me...
Regards,
Manoz.

Remove Subsequence Headings From XML Report

Similar Messages

Maybe you are looking for