Remove the dotted line in the image map

dear all, i would want to know how to remove the dotted line
of the image map, for my case, i cannot see the dotted line in IE
but can see the line in firefox, (in my boss computer, he can see
the dotted line in both IE and firefox)
i have try some method such as using the component of
Remove
IE Link Scrubber by PVII. while i find it is not work. could
any one give some suggestion for me to remove the dotted link of
the image map or give me some ways that other than using map.
thx a lot !!!!!!!!

i have find a way to solve the problem of the dotted line in
the image map
e.g. <map name="123" >
<area style="cursor: hand" shape="circle"
coords="223,261,76"
onClick="checkit('m_strategic/m_strategic.cfm')"></map>
the checkit() method is just to redirect the page into other
page only.
however another problem is face, the cursor will not change
to hand when i point to the image map, i have try adding
onMouseMove="this.style.cursor=hand" on the <area> tag
however it don;t work, it only work when i put into the <img>
tag. can any one tell me how to change the mouse cursor in this
situtation??
thx a lot

Similar Messages

  • How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center?  I can select 2 page view and cover page in 2 page view, but the dotted line shows up.  Thank you!!

    How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center?  I can select 2 page view and cover page in 2 page view, but the dotted line shows up.  Thank you!!

    Hi skt102711,
    I would like to inform you that acrobat doesn't support .epub to .pdf format conversion. Please browse this Link for more information : Supported file formats | Acrobat, Reader
    Regards,
    Rahul

  • How do I get rid of the dotted line on right side of bounding box

    Ever since I upgraded to CS5, I seem to have a broken dotted line along the right side of the bounding box of the png logo that was created for my company.  It wasn't there before. I've gone back to my original back up of the logo and this broken line is in all the versions now.
    Whenever I use the artwork a single dash/dotted line is left on the far right, where the right vertical line of the bounding box would have been. You can see it in the image below on the right.  Its a faint white line but when printed on a banner its stark white.  The line falls just above the last "A" in Alberta.
    I can use Illustrator and Photoshop basics and but have trouble when I get into problems like this.
    Can anyone help me figure out why its there and how to get rid of it?
    I would appreciate any help!
    Thanks.

    Wade and Monica,
    Thanks for your help.
    Wade, it hit me when you asked "why is it a png" file and I realized that I was using the wrong file.  Sometimes its hard to see the forest for the trees!  Problem for banner artwork fixed and I have now used the correct logo file so no more dotted line.
    The dotted line only appears on the the png version of the logo.  There's no coloured background on the logo file.  She gave me the file as both an eps and a png file. I'm pretty sure she created the logo in Illustrator.  I've been using the png file for the website, which is what I thought it worked well for.  And the eps one for my print materials.
    I have no clue why I grabbed the png instead of the eps logo file I usually use, but thanks for pointing out the obvious since I wasted time trying to fix it and was getting very frustrated at what had suddenly gone "wrong".
    I still have that dotted line on the png file of the logo but I'll have to figure that out another day.
    Thanks again!
    Hasmi

  • Acrobat X: Option to hide the dotted line in between pages when viewing in 2 page view?

    Acrobat X: Anyone know if there is an option to hide the dotted line in between pages when viewing in 2 page view?  So that the 2 pages can look seemlessly joined, with no gap and no dotted line?  This would be useful when viewing PDF magazines or books in which 2 pages join for a larger picture.

    Create a Page 0 item which will be available on all pages.OMG yes I can use items in page 0 ! I should have think of that :/ Shame on me.
    Application item values can be set from JavaScript using AJAX and an On-Demand Process.Yes I already tried ajax with ODP, my getappitem() function works but my setappitem() function won't assign value to application item, but it's not a problem now, I removed the ajax part and I will use page items :D
    Thank you fac586.
    Yann.

  • They are dotted lines across the screen horizontally.

    When I upgrading to Lion Mountain, now I see somes "Drops" in the images. They are dotted lines across the screen horizontally. I reformatted and reinstalled OS 10.8.2, but the problem persists. I went to service, thought it was a video card problem, but it was not.

    I have this too! I just bought this iMac a few months back. These screen are having a lot of troubles from what I am reading. My horizontal lines are not that bad, but you can notice them.
    I might sell these computer off quick as apparently the quality of these screens is a nightmare.

  • How to remove the blank lines at the end of the JTextArea .

    Hi,
    I need to remove the blank lines in the JTextArea at the end. Suppose i am giving 'A' in the first line and press the enter key two times, after i am giving the 'B' in the third line and press enter key for two times. I need to remove, the last two lines of JTextAreae, . How i can remove these lines?

    String#trim() removes all whitespace from both ends of the String.
    The requirement was to remove line breaks from the end of the String only.
    String#replaceAll with a suitable regex would do the trick. Untested regex for this:text.replaceAll("[\\n\\r]+$", "")db

  • I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

    I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

    If there isn't a Page Setup in the Print Dialog, open Text Edit>Edit>Page Setup, check borders there or use Custom Page setup & save.

  • Unable to remove the "blank" line at the end of the file

    Hi Experts,
    My requirement is to send data in 'Binary' form as an attachement to a mail address. I have followed as below.
    Converted data into Binary form using the FM 'SCMS_TEXT_TO_BINARY'
    Call FM SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail.
    Until this point, all works fine and I receive a text file as well. Howvever, a blank line gets appended at the end (after last line) of the file. Please let me know, how I would get rid-off this empty line. Please refer attachment.
    Thanks in advance !

    Thanks Manish.
    I have resoved the issue, following steps have been incorporated.
    1. Find the output length of the file from the exporting parameter(output_length) of the Function module 'SCMS_TEXT_TO_BINARY'
    2. Pass the output length to DOC_SIZE component to the second line of the itab packing_list of function module 'SO_NEW_DOCUMENT_ATT_SEND_API1'.
    3. Pass the output length to DOC_SIZE component to document_data of function module 'SO_NEW_DOCUMENT_ATT_SEND_API1'.
    So there it is, the blank line is gone....
    Regards,
    Umar Ali

  • I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

    I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

    rickeyt
    Thanks for the reply. Great news about the volume adjusts.
    Now about those fades for the volume. How are you doing that?
    1. Right click the Timeline video audio and select Fade and then
    see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
    2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
    Please let us know if any of the above works for you with regard to the audio fades.
    Thank you.
    ATR

  • How to count the total lines of the file (including the file header)

    Hi all,
    I am working with Idoc to file scenario(FCC).
    I need to map one of the field with a recound count ie.., count of the total lines of the file (including the file header).
    Eg:Record Count-- mapping area:Total number of records in the file including file header     The total line of the file (including the file header).
    Can i get a help on this.
    Thanks and Regards,
    Manoj

    Hi !
    If there is a tag of your IDOC that occurs the same quantity of times as file lines you have to create in your target file, you could make a Java user defined function in graphical mapping that "caches the entire queue" (use the corresponding option button), that receives as input that field of the IDOC, and returns the "lenght" (.length property value) of that input parameter (it is an array) as output..that should be the file line quantity..you may also add 1 to that count, for the header.
    Hope it helps.
    Regards,
    Matias.

  • I put a Favicon on my website, which can be seen in the adress line and the tab header. However, when I add this site to the bookmarks, it doesn't show it's favicon.

    I put a Favicon on my website, which can be seen in the adress line and the tab header. However, when I add this site to the bookmarks, it doesn't show it's favicon. I have tried deleting and creating a bookmark and also refreshing the webpage or clicking on the bookmark. I don't know what else to do. I use Firefox 4.0.1

    I'm getting favicons for most of my bookmarks, so there might be some issue with the coding or the image format.
    Do you use a tag like this in your page?
    <link rel="shortcut icon" href="/path/to/favicon.ico"/>

  • I need to put a line like the blue line in the file below. somebody tell me how to do that please.

    it is the blue line from the header to the footer which separates the two dividers on the sides

    You asked this same question before and I replied to your previous post.  No need to double post.
    Use a repeating background image.
    http://forums.adobe.com/message/2480426#2480426
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • Editing the thumb-line in the photopage

    When you open a photo-page, you first get the thumbs. Then clicking on a thumb you continue to a page where uyou see the picture in larger size, and the other pictures as thumbs in a line over. Is it any way to edit this? I would like to be able to move the thumbline down , and maby make them smaler. Is this possible?
    Can I move the different buttons around the page as well? ('next', 'previous', 'play slideshow' and 'back to album')
    I also would like to move the links ('play slideshow', ' back to album', ',next' and 'previous'). Can I do that?
    Can I remove the 'back to album'-button on the thumb-line-page (the page you get to when clicking on a thumb at the photopage, getting a bigger photo with a thumb-line over)?
    It would be great if you could go directly to the so called thumb-line-page and skip the first thumbnail page. Is this possible?
    Message was edited by: pereide

    I just add the whole post again, edited it and stuff it might be diffrent from when you read it. You might have seen it all and answered it, but. I'll give it a go.
    When you open a photo-page, you first get the thumbs. Then clicking on a thumb you continue to a page where uyou see the picture in larger size, and the other pictures as thumbs in a line over. Is it any way to edit this? I would like to be able to move the thumbline down , and maby make them smaler. Is this possible?
    Can I move the different buttons around the page as well? ('next', 'previous', 'play slideshow' and 'back to album')
    I also would like to move the links ('play slideshow', ' back to album', ',next' and 'previous'). Can I do that?
    Can I remove the 'back to album'-button on the thumb-line-page (the page you get to when clicking on a thumb at the photopage, getting a bigger photo with a thumb-line over)?
    It would be great if you could go directly to the so called thumb-line-page and skip the first thumbnail page. Is this possible?

  • When capturing video; how do I get rid of the green lines at the bottom of the frame?

    When capturing video; How do I get rid of the green lines at the bottom of the frame?

    s.haider
    You have Canon ZR950 mini DV Camcorder, why not make a firewire connection and do DV data capture into the Premiere Elements 8.0/8.0.1 Capture Window?
    Do you have any reference for what you are attempting to do or is this a creation of your own? Could you confirm what you describe as "just capturing video".
    a. From your information, you are doing Get Media/Webcam or WDM Device with the Capture Window showing the Capturing Device as "Dazzle DVD 100 Video Device". What type of connection are you making between the Canon ZR950 and the Dazzle DVD 100 and the computer?
    b. What exactly do you expect to be putting on the Premiere Elements 8.0/8.0.1 Timeline from this capture...DV AVI or something else?
    Coming from the perspective of Premiere Elements 8.0/8.0.1 known issues, I would ask you to consider:
    a. Remove the check mark next to AutoAnalyzer in the Capture window. Even if you were doing this Capture the "usual way", that is highly recommended.
    b. Go to Edit Menu/Preferences/General, and compare your results with and without a check mark next to enable GPU playback. As a cross reference, please go to Edit Header/Effects/Video Effects and detemine if there is a category of Effects named GPU Effects. Do the same thing for Edit Header/Transitions/Video Transitions and determine if there is a category of Transitions named GPU Transitions.
    And, the general drill for all users of Premiere Elements 8.0
    a. Are you working with the automatic Background Rendering and AutoAnalzyer Features turned Off?
    See Premiere Elements workspace Edit Menu/Preferences/General for background rendering option and Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer Options for AutoAnalzyer options.
    b. Are you working from the 8.0.1 Update version of the program?
    Please consider.
    We will be watching for the outcome.
    Thank you.
    ATR

  • I am trying to draw a dotted line around a image through phtoshop CS5 sdk(64 bit)

    the problem is that the dotted line is being created on my computer but it is not working on other computer ... when i checked on other system , it showed a error code on Play command .. i have windows 7 ( 64 bit )  and other system was also 64 bit ..
    i have tried most of the things i know but the problem still persists. now i rely on you guys to get some advice and help ..
    please help me
    please send me code if you could create it
    . thank you

    I see this error in your output:
    2014-11-26 10:55:23,583 ERROR [ThemeAutoDeployer]
    java.io.FileNotFoundException: /tmp/liferay/com/liferay/portal/deploy/dependencies/liferay-theme.tld (Too many open files)
    I'm not across what the EBS recommended setting for this is, or if there is one.  But try running:
    ulimit -n
    ... and if the number is low, edit /etc/security/limits.conf , add some entries for increased "soft nofile" and "hard nofile" and run sysctl -p.  See Linux & Java tips: Too many open files .

Maybe you are looking for

  • IR Search bar display on the right when no data found

    How do I get the Interactive Search bar to be left justified when no data is found. I'm using Sand 10 Theme, and the region my interactive report is in is Page Template Region Position 3 Does anyone have a suggestion on this? Edited by: deandyno on A

  • BTE FOR f110 not trigerred

    Hello Gurus, I have one BTE ZPFRFI_PROCESS_00001120 which works properly for Tcode FB01 but is not triggered by F110. Please help.

  • Download previous versions of FireFox

    I currently downloaded a new version of FireFox 3.6.17 however a program I use for work on FireFox does not work with this version and I need to find a downloadable version of 3.6.16 for MAC. Does anyone know where I can find this.

  • Plug-in for syncing audio

    I have a separate audio track that needs to sync up with video.  There's a nice plug-in for Final Cut Pro that can handle the syncing:  http://www.singularsoftware.com/.   Does such a plug-in exist for Premiere or is there something native in Premier

  • Connection problem - no ftp connection

    It is hard to use Dreamweaver, when the FTP connection seems to have been erased.  Has anyone experienced this?