Remove the stacked sequence structure from LabVIEW.

Remove once and for all the stacked sequence structure from labVIEW
                                       It's an absolute horror.

> Sequence locals are sometimes (for very few cases) usefull if you know how to use them properly
What does that even mean????
(.. and you are repeating basically the same statement about four more times as if  the use of sequences and sequence locals is an advanced skill, only to be used by LabVIEW masters. Your post is so redundant that it could be condensed to 20% of the size without loss of information).
It is clear that the stacked sequence can never disappear from LabVIEW, because of the need for backward compatibility. (It could be taken out of the palette, but why...).
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Retrieve iteration from stacked sequence structure

    I have a stacked sequence structure with 15 iterations. Is there a functional equivalent to the "i" from the For loop or a way to make one?
    I need to trigger some other events based on what iteration of the stacked sequence is running. 

    Let me first reiterate what the others have said. Avoid stacked sequences like the plague!
    I have found that except for very few situations there is always a better way then using a sequence structure.
    That being said you could use a local variable to do this too...
    Attachments:
    it3.jpg ‏43 KB

  • Question about stacked sequence structure

    Hi,
    I made a numeric control outside a stacked sequence structure, and connect the control both to frame 1 and frame 2. In frame 2 there is a while loop structure. And now I start the labview program with the control A. Then, after frame 1 finished, frame 2 started, now I want to change the control to B and deliver B into frame 2. But the indicator in frame 2 shows that the control is still A. So I wonder how can I change the control and deliver it to the frame after the frame has started? Thank you!
    NI Software :  LabVIEW  version 7.1
    OS :  Windows XP
    Regards,
    jackauden

    Dataflow dictates what you are seeing. The control does not get read once the sequence starts. This is as expected.
    Some possible solutions:
    Just don't use stacked sequence! I don't and never feel limited by this choice.
    Create local variable of the control and read from it inside frame 2.
    Do you REALLY need a stacked sequence? Why???
    LabVIEW Champion . Do more with less code and in less time .

  • Remove the newsfeed, skydrive, sites from master page

    hi,
    i want to remove the newsfeed, skydrive, sites from the  top of the sharepoint site: [[ as shown below ]]
    is this possible?
    pls help

    you can just replace the delegate
    SuiteLinksDelegate Delegate Control with empty new delegate control with lower sequence check the post below 
    http://zimmergren.net/technical/sp-2013-some-new-delegatecontrol-additions-to-the-sharepoint-2013-master-pages
    Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

  • Can I remove the skip links piece from a WebCenter Portal Application?

    We have a better skip links implementation we would like to use. How can I turn off the default? Not simply hide it, but rather not render it at all period.  This goes the same for the noscript piece that says JavaScript is required to run the Application.  I also have a better solution I would like to use so I would also ask how do I disable the noscript piece. Do I need to edit some xml file or something? I search my application for "noscript" and "af:skipLinkTarget" and I can't find either one. How can I remove/disable these features. They are just not appropriate for this particular application. Any help would be greatly appreciated.

    Hi.
    Are you using Portal or Framework Portal?.
    In case of <noscript> is generated by JAVA internal classes and the unique way to change the message is with a Non supported workaround overriding a CoreBundle class.
    About the af:skipLinkTarget usually is in the Page Template. The default templates has it in next snippet:
    <f:facet name="center">
        <af:skipLinkTarget>
        <af:facetref facetname="content">
        </af:facetref>
      </af:skipLinkTarget>
    </f:facet>
    If you're using default Templates then copy them and remove the af:skipLinkTarget tag from the copied one and assign it to the Portal.
    I hope it helps.
    Regards.

  • How can I remove the old apple id from my ipod 4rth gen to log in my new apple id ? (my old apple id keeps showing automatic I can't put my prefer new apple id)

    How can I remove the old apple id from my ipod 4rth gen to log in my new apple id ? (my old apple id keeps showing automatic I can't put my prefer new apple id)

    - Note that apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

  • How can i remove the previous icloud acount from my iphone4?

    I recently purchased a second hand iphone4 not jailbroken and i already restored it to factory settings but i can't log in to icloud using my account because it states that  "The maximum number of free accounts have been activated on this iPhone". How can i remove the previous icloud acount from my iphone4? Hope someone could help me on this. Cheers! :)

    Hi,
    My dad gave me his old iphone as he got an upgrade. I can't seem to change his icloud account to mine. I'm getting his updated calender and his mail - and there seems to be some confusion between both our accounts. He seems to be acquiring some of my contacts - some of which have names which have led to some probing questions... So basically this needs to be sorted out! How can i delete his account from the iphone but not his whole icloud account? he would not be happy if i did this...
    Sophie

  • Unable to remove the redundant group header from the bottom of page

    Hi,
    In one of my projects in I am facing a problem.
    I need to display the details of all available products of the company. While displaying the details, I need to group the products based on some criteria (like type of product, release date) and the grouping is upto 4 level grouping. Grouping criteria can se said as, I need to firstly group all the products based on the type, then on the Release Date and then on two of the client specific values on the Product.
    Along with this, the view of product details is a thumbnail view (Image on top with all details below that line after line) due to which I need to display multiple (5) products in one row.
    The problem which I am facing is:
    The most important criterion for the customer is that there should not be any wastage of space.
    Secondly, they also donu2019t want to see partial data like only the header data in one page and the Product related Data (Image and Info) on the next page.
    In my case, when first page has insufficient space for the next grouped products, it simply displays the group header on the first page. On the second page, it again displays the group header along with the data.
    For reference, images are available at:
    Image1: http://farm4.static.flickr.com/3454/3224626688_aa3cfb8236_m.jpg
    Image2: http://farm4.static.flickr.com/3373/3224626782_0501cf566f_m.jpg
    My requirement is to remove the redundant group header from the first page as it does not make sense without having any data below it.
    I have tried the following options:
    1. I tried to apply setting "Keep Group Together" on the group and "Repeat Group Header On Each Page". But when I apply this, when my second group has more than 5 products (two rows of data) and space on first page can accommodate only 1 row of data, it moves the data on to the second page instead of keeping the 1st row on first page and 2nd on second page. This solution is not acceptable to the customer as it wastes space.
    2. If I remove setting "Keep Group Together" on all the groups, but keep the "Repeat Group Header On Each Page" and remove the "Keep Object Together" in the details section, I can save space. But this is not acceptable to the user as it leaves dangling headers (Orphaned Header Information).
    Need some pointers to overcome this issue as it is very critical for me.
    Thanks in advance,
    Vibhav Agrawal

    Thanks Raghavendra for your reply.
    These solutions provided on the link are not useful for me because of the peculiar layout of my report.
    In my report I am supposed to show details of multiple items (upto 5/6) in a single row.
    All solutions suggest about adding additional header (below group header) and use the formula to use that header to put the data for initial first object and details section for the subsequent objects.
    But, since i need to display multiple items in same row...and data cannot be set as 'format with multiple columns' in the header, hence this solution does not work for me
    Thanks,
    Vibhav Agrawal

  • HT1349 how  do you remove the header and footer from a document

    how  do you remove the header and footer from a document

    It depends upon the app you are using.

  • To remove the cancelled Billin doc from VFX3

    Hi all,
    We have a cancelled billing doc in VFX3. This is because the accounting document is not generated for the same due to some foreign exchange value mismatch as the biiling doc was created in one month and cancelled in another month. So credit memo was created and released to accounting. But in VFX3 we can still find the cancelled billing doc which was not released to accounting.
    My question is how to remove the cancelled billing doc from VFX3. Please help me out and do the needful. Awaiting for the responses..........
    Regards,
    Pushkara

    Hi,
    When i changed the date also i'm getting the same error.
    Reversal of document 465v1 901005447v2 2010v3 not possible in FI
    Message no. F5A005
    Diagnosis
    Item &v4 in accounting document 465  901005447 2010
    was valuated with an open item foreign currency valuation.
    System Response
    Document cannot be reversed.
    I tried by changing the foreign exchange also. Still it didn't work.
    Please do the needful.
    Regards,
    Pushkara

  • IPhoto for iOS removes the GPS exif data from the photo after an edit

    iPhoto for iOS removes the GPS exif data from the photo after an edit
    Using the iPhone camera, I take a photo and then I want to make the photo a little brighter.
    So, I edit a photo using iPhoto for iOS and then save the photo back to the camera roll.
    Now, I might want to see where that photo was taken via another app (like Photo Mapo) or on the map using the Photos app, or even the Mac iPhoto app.
    However, the GPS data has been removed. Looks like all of the other exif data is still in the photo.
    Why not just have a feature to remove the GPS data if the user wants? no reason to remove it for them.
    The user explictily chose to have location services turned on so the GPS data would be in the photo.
    Is this a bug?
    Thanks,
    Brian.

    First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
    None of my cameras has a GPS function so I never see that data in the info of a photo in iPhoto for iOS. But I do see the map choice to set a location for the photo. Perhaps a reboot will fix this for you.

  • Removing the Vertical scroll bar from the content area.

    Hello,
    Is there a way to remove the vertical scroll bar from the content area?
    I am trying to create a new light portal frame work.
    Everything works fine except that I see two vertical scroll bars, one from the content area and another from the page(frame).
    Thanks in advance.
    -Sudheer

    Hi
    There are a couple of ways in which to achieve this
    1) Try and make the content flat. What I mean by this is that the content area (when using the standard light framework) doesn't contain an iframe, meaning that the iview defined on the page has "EMBEDDED" isolation mode. This should mean that you only have one scrollbar (if the content extends past the size of the browser)
    2) If you need to make the iview URL isolation, then try and get the domain of the content to be of a similar domain to your portal server, i.e. your portal is portal.company.com and the content is content.company.com. In this way you can make the pages expand.
    NOTE: One thing to note is that when using URL isolation iviews doesn't allow the automatic expanding of the iframe content. This is because the standard javascript doesn't allow this. Therefore you may have to write your own javascript function (or content area page) to do this
    I hope this helps
    Darrell

  • How can I remove the authorize 5 computer from my iTunes?

    How can I remove the authorize 5 computer from my iTunes?

    Deauthorize one computer
    Open iTunes on the computer you want to deauthorize.
    Choose Store > Deauthorize This Computer.
    You might need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
    Enter your Apple ID.
    Click Deauthorize.
    If need to deauthorize your computer but you can't access it, you need to deauthorize all computers. After you authorize 2 computers, you'll have the option to deauthorize all computers for your Apple ID. You can deauthorize all computers once per year.
    Deauthorize your computer using iTunes - Apple Support

  • Remove the Enter key binding from a JPopupMenu

    Hi,
    Does anyone know how to remove the Enter key binding from a JPopupMenu?
    So when the popupmenu is showing and you type Enter, nothing should happen and the menu should stay where it is.
    I have tried:
    popup.getActionMap().put("enter", null);
    popup.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "enter");but the popup always disappears.
    Any ideas?
    Cheers,
    patumaire

    First of all, that is not the proper way to "remove" a key binding. Read the Swing tutorial on [How to Use Key Bindings|http://java.sun.com/docs/books/tutorial/uiswing/misc/keybinding.html#howto] for more information.
    However, we still have a couple of problems:
    a) the input map is dynamically built as the popup menu is displayed
    b) the input map is built for the root pane, not the popup menu
    The following seems to work:
    popup.show(...);
    InputMap map = getRootPane().getInputMap(JTable.WHEN_IN_FOCUSED_WINDOW);
    map.put(KeyStroke.getKeyStroke("ENTER"), "none");
    KeyStroke[] keys = map.allKeys();
    for (int i = 0; i < keys.length; i++)
         KeyStroke key = keys;
         Object action = map.get( key );
         System.out.println(key + " : " + action);

  • How can I remove the Emergency Call button from the lock screen Xperia Z2

    How can I remove the Emergency Call button from the lock screen on my Z2 phone

    Alecuk wrote:
     It's like the stupid bold font on the hours or the lock screen clock - i've never seen anything so stupid in all my life.
    it's things like this that make a good phone c.r.a.p.
    Hi, well if you do a little bit of research on the forum you will be able to see that you can & very easily able to change the font on the clock 

Maybe you are looking for