Remove the unpack stock !!

Hi ,
Where the entered quantity is greater than zero, this is what I expect the program to do:
1.  Change the quantity in HU using BAPI BAPI_HU_UNPACK and
2.  Update  the planned order using BAPI BAPI_PLANNEDORDER_CHANGE
3.  Remove the unpacked stock from the system using the movement type in the Z-table  Z2C_RECEIPT_REV. This is basically a reversal of the original receipt.
how to perform the 3rd step? suggest what would be the exact process or the function module to be used...
Regards
Gunjan

Hi  Lakshmipathi,
Thanks for your response. How we will reverse the stock.
Regards,
sukumarreddy

Similar Messages

  • Remove the unpacked stock !!

    Hi ,
    Where the entered quantity is greater than zero, this is what I expect the program to do:
    1.  Change the quantity in HU using BAPI BAPI_HU_UNPACK and
    2.  Update  the planned order using BAPI BAPI_PLANNEDORDER_CHANGE
    3.  Remove the unpacked stock from the system using the movement type in the Z-table  Z2C_RECEIPT_REV. This is basically a reversal of the original receipt.
    how to perform the 3rd step? suggest what would be the exact process or the function module to be used...
    Regards
    Gunjan

    Hi  Lakshmipathi,
    Thanks for your response. How we will reverse the stock.
    Regards,
    sukumarreddy

  • How to remove the open stock

    Dearl all,
    I have created PO with QTy 50000 KL and GR has been done for 3000 KL now in MMBE open stock parcular material is showing 2000 KL now i dont want to receive 2000 KL qty, i tried to delete the line item in PO its showing error Msg qty2000 smaller than qty delivered 3000 and i blocked the line item but showing in the open stock (inMMBE) gow to remove it
    please advice me
    points will be rewarded
    Regards
    venu gopal

    Hi
    If you donot want to receive the Further 2000 KL, In the PO item, change the PO order qty to 3000 KL & flag the delivery completed indicator in the PO item
    Thanks & Regards
    Kishore

  • How to remove the negative stocks in transaction code MB51

    hi experts,
    i have this problem, when i display this material 12345 in MB51 there is a movement type 601 created in it. now when we are processing a customized program the report that was displayed does not match with the actual stocks because of this negative qty. the material document was created 3 years ago.. please help what is the procedure that i will do in order to correct the report and remove the -value in MB51.
    thank you very muhc in advance.

    Dear Ysabella Bautista
    Can you please let me know whether MB51 shows the correct quantity when compared to physical stock ??  Why I am asking is that you had indicated that in customized programme, the report was showing wrongly which may be due to some wrong coding problem.
    Also on your comments "remove the -value in MB51", please note that since this TCode is a standard one, 100% guarantee that the system shows ONLY correct value.  This is my opinion !!!!!!
    thanks
    G. Lakshmipathi

  • How remove the special Stock E when i do a decisión usage ?

    Hi SAP expert,
    I copied the mov type 309 to Z09 and i am using this to  postings inventory to New Material
    Some materials are MTO and when they are produced they are
    associated with a sales order (special stock E). Is there any way that when you
    move to a new material (Mov Z09), they are automatically removed from the
    order?
    Currently  after the posting stock, we must use the mov type 411E to do that.
    We have MTO and MTS Materials
    Thank You

    I haven't had a requirement like that personally.  But I can understand the issue with the UD.
    I don't think there is anything in QM you do directly.  You might want to consider maybe adding a UD follow-up action to do the 411E for you in the background.
    Craig

  • My Ip5 got stocked on "searching..." For my carrier. I already removed the SIM but it doesnt stop searching. How can i troubleshoot this kind of problem?

    How can I troubleshoot my iphone5 if it got stocked searching for my carrie?. I already tried removing the SIM card but it doesnt stop searching. I also tried using other SIM but still same result.

    Try this: press F10 or tap the Alt key to display the menu bar temporarily, then
    View > Toolbars > Menu Bar
    If that doesn't work, you could reset your toolbars to factory default using Firefox's Safe Mode. First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
    Next, start Firefox in Firefox
    [http://support.mozilla.com/kb/Safe+Mode Safe Mode], and check only the box to reset toolbars. Be careful not to "reset" anything else if you didn't back up.
    Hope this helps.

  • How to remove the stock from 916 -storage type

    Hi experts,
    In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
    How to remove the stock?
    Regards
    vr

    the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
    if the delivery is already goods issued, then you have to use LT01 to move the quants.
    The positive quant of 30 quantity can be moved to the place where it phyiscally is.
    the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse.  so you move from this bin to 916.

  • How to Remove the Stock from 916

    Hi All,
    I have a few questions Related to WM.
    1. Our End users are able to do the PGI Without Confirming the Transfer Order. Once they Do the PGI.After doing the Billing they are coming abck and saying that the stock shud not Present in 916.
    Would you please let me know how can I clear the stock from storage type 916 and the bin created with Delivery number.
    Is there any Possibility to Remove the stock from 916......?
    Waiting for your Response .............
    Sai Kumar

    Hi
    What our friend is saying is that in the config for item categories for deliveries if you set this flag it means that the PGI wont happen unless the TO creation and confirmation are both at status 'C'
    Also ABAP techie
    I see  we asking for points again, what are you going to do with them when you get them?
    I dont think that this is the point of this Forum!!
    Regards
    Frenchy

  • To remove the stock from WIP area when confirmation was cancelled.

    Hi Gurus,
    How can we remove the stock that was commited , from the WIP area when we cancel the confirmation.
    Plz help me..
    Thank you.

    Let me understand your problem as followed ..
    You have created an order and did GR.. (For that order you would have done GI in 261)
    Now you have cancelled the confirmation...
    GR also is cancelled( Reversed).The result is the material which you did GR is now at you..i.e WIP
    Your problem is now you should not have materials in WIP..
    for that you have to do 262..Reversal of GI.. Then only the materials that the order contains will be removed... That is what we call as WIP...
    Hope you are clear..
    karthick

  • Remove the stock

    Hi,
    Due one warehouse burnt, physically there is no stock.
    but system stock is there. How to remove the stock .
    BY doing Physical inventory we can remove stock
    but stock exit in different interim storages and negative stock also exits.
    how to proceed?
    regds

    Hi,
    In my opinion first you shoul make order in you warehouse:
    - process all TRs (LB10, PCNs (LU04)
    - reverse picking against deliveries (if picked goods cannot be delivered due to damage)
    - if still you have minus stock you should investigate what the reason is (is it allowed in IM? There's no corresponding PCN?) --> eliminate it (it may happen you have to move the proper +quant to the -quant manually.
    So, I suggest to make preparation first, and only after that start PI (you should be able to make order in the syste, only the wh burnt).
    Regards,
    Csaba

  • Remove the qty form reservation column in stock overview

    Hi,
    we have created production order for a finish material, for that semi finish material is reserved.
    but we don't want to proceed the production order further.
    i need to remove the qty from the reservation column of semifinish.
    is it possible to do that???
    thanks/regards
    vish

    Dear Vishwanath
    When we create a production order, reservations also get created for  its components automatically. These reservations cannot be deleted. To remove these reservations you need to apply the TECO status to that prodeuction orders.
    If you dont want to proceed with the production order then make the TECO status active, the reservations will get deleted.
    Regards
    Amit Parkhi

  • How to remove the Option "Only Refer Excise Invoice "from MIGO

    Hello,
    We are using the ECC 6.0. while suppose material is excisable then there are Four options will come in MIGO --Excise Invoice tab
    1)Only Cature Excise Invoice
    2)Only Refer excise Invoice
    3)Only Part1
    4)No excise Entry
    As per my client requirement then only need two options in MIGO.
    1)Only Part1
    2)No excise Entry
    Bcz they want to Capture and Post excise Invoice in J1IEX only...
    I have tried from Tax on goods movementIndia-Basic settings--Excise Grp settings..... Here in MIGO settings  we can remove the Click from "EI Capture"....Then we will not find the Capture excise Invoice in MIGO. Next How to remove the "Only refer Excise Invoice from MIGO..
    Regards
    sapman

    Hi,
    You can capture Excise Invoice w.r.t. PO in J1IEX and then refer it during MIGO (Note: - You are not capturing Excise Invoice again, only referring it) and then Post it in J1IEX.
    And in case of Stock Transport Orders, you need to refer the Excise Invoice No at the time of GR in receiving plant which is posted in the Supplying Plant (via J1IIN) so that system will copy all the duties same as of that invoice and user need not to do any manual intervention.
    Also in case of Imports, first you capture Bill of Entry w.r.t. PO in J1IEX and then refer it during MIGO and finally post it in J1IEX.

  • How can I remove the 'Qty' text from individual product descriptions?

    I didn't know if this was possible or not... I've recently taken the reins of handling an ecommerce site that had been published before I got on board. My boss wants me to remove the 'Qty:' description from some products because the image shown for some products is a misleading description of the actual quantity available (i.e. there is a picture that shows a stack of conveyors parts, and it says 'Qty: 1' to represent one 'stack' of conveyor parts - this confuses customers into thinking there's only one individual conveyor part available however). To avoid any confusion he requested that I remove the 'Qty' text from similar images. I see that you can change the 'In Stock' amount of a particular product underneath the 'Inventory' tab of the 'Products' menu, but I didn't know if it was possible just to remove the quantity description altogether without just typing the quantity in at zero. This is likely a strange question but I didn't know where else to ask! I would appreciate any help or advice Thank you

    Hi ewhelhalu,
    I just figured out a way to do it, but it's a little weird and complex, and I have no idea what the consequences for editing this .plist string might be. I'm thinking it'll be OK, but you never know what might happen when you screw around with Apple's intentions.
    So if you have the Developer Tools on your install of OS X, you can use the Property List Editor to edit the Dock files. (If you don't have this program, you can use a program like [Pacifist|http://www.charlessoft.com> to selectively install stuff from your Leopard disk).
    The file you're interested in is within Macintosh HD > Users > Your Username > Library > Preferences, and it's called com.apple.dock.plist. Open that up with Property List Editor, and open the arrow drop-down next to "Root." The lines you're looking for are "persistent-apps" (the left side of your Dock) and "persistent-others" (the right side). If you open the drop-down arrows, you'll see there are numbers below each. The numbers correspond to your Dock items, from left to right.
    If you click on drop-arrows by the numbers, a sample hierarchy looks like this: 0 > tile-data > file-label. It's the "file-label" string that you want to edit. Just make it ("it" being the name of the icon under the "value" column) blank, save the file, go into Terminal and type "killall Dock" without the quotes, and your Dock icon should appear without a name. You'll have to do this for all of them.
    I should insert the usual caveats here about backing up beforehand and making sure that you have a copy of the .plist file before you start tweaking it so that you can replace it if things go wrong. And perhaps someone with more knowledge of Terminal or third-party apps than I have will come along and suggest a simpler solution. But that's the only one I have.
    Hope that helps!
    —Hazy

  • How do yo remove the Sense UI

    I should have played with the phone more in the store.  Got it for my daughter and the interface is so unintuitive "even to her" I would like to know how to remove it, disable it and go to a stock Android interface.  The home page is one big icon/widget that seems nearly impossible to customize.  The dock bar at the bottom on our droid 3 and bionic you can put whatever apps you want on it so they are there persitent from screen to screen, how to do this on the Rhyme is beyond me.  AND switching the apps button on the bottom dock to the left side??? really it is on the right on every other Android we own or have ever seen.  There is a reason people get really good at playing musical instruments, it is because people don't move the strings, notes, buttons, keys around.
    I hope there is a solution, so far all I have found works on older HTC sense phones and not new ones.  I hope someone can help or this goes back for an Incredible 2, oh wait that is HTC as well hope it still runs a stock Android interface.

    Hopefully I can help a bit here.  On the main home screen that is just a widget called quick launch. (or something to that effect)  It is designed to have less clutter on the home screen at the cost of custimization.  This can be removed the same as any other widget on an android device, touch and hold and drag to the trash can.  After that you can customize that screen to you hearts content.  The Rhyme does not use the dock bar at the bottom for apps, but you can add apps to be opened directly from the lock screen for faster acess to frequently used apps.  As far as the app drawer is concerned different phones have them in differently places, the newer HTC phones (Rhyme, Rezound) have them on the left, some phones have them in the middle, (Commando, Galaxy Nexus which is stock android) and other phones (I'll admit, the majority) have them on the right.  And lastly, no phone runs stock android except for the Nexus line of phones, the older one was actually made by HTC, and the newer one is Samsung and is running Android 4.0, or Ice Cream Sandwich.
    I'm sorry you don't enjoy the Sense UI, I personally love it and would have a hard time going back to a non-HTC phone at this point.  Hope everything works out for you!

  • How to loading the opening stock balance into Infocube 0IC_C03

    Dear Expers,
    I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
    Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    (1)original text:
    Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
    0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
    (see screenshot).
    Question:
    How to find option that upload mode u201CCreate opening balanceu201D?
    i'm  use to customize infopackage.  i  can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
    (2) I actived BI Contnet (0IC_C03), I seen that the data flow  as following:
    Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
    Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
    Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
    Quesiton: I donu2019t  know whatu2019s version, neither like BW 7.X nor like BW 3.X,
    Why have infosource in BW 7.X, how to use infosource load data to target?
    Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
    Do  I  need to create a  customize ODS?
    Thank you very much , if you will answer me above two questions.
    Best Regards
    Steve

    >
    stevezhuang wrote:
    > Dear Expers,
    >
    > I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
    >
    > Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    >
    > (1)original text:
    > Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
    > 0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
    > (see screenshot).
    >
    > Question:
    > How to find option that upload mode u201CCreate opening balanceu201D?
    >  i'm  use to customize infopackage.  i  can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
    >
    >
    >
    > (2) I actived BI Contnet (0IC_C03), I seen that the data flow  as following:
    > Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
    >
    > Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
    >
    > Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
    >
    > Quesiton: I donu2019t  know whatu2019s version, neither like BW 7.X nor like BW 3.X,
    > Why have infosource in BW 7.X, how to use infosource load data to target?
    > Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
    > Do  I  need to create a  customize ODS?
    >
    >
    > Thank you very much , if you will answer me above two questions.
    >
    >
    > Best Regards
    > Steve
    You don't need to worry about 0DF_C07 as it was defence cube not activated during your Business Content Activaiton.
    YOu can create your own infopackage for 2LIS_03_BX and there will be option generate intial status.
    This loading will create your Opening Balance.
    you need to compress this with NO Marker UPDATE option unchecked(as you will have to update hte marker).
    After this load movements 2LIS_03_BF and reval 2LIS_03_UM. Compress this with NO MARKER UPDATE option checked.
    Regards,
    RK

Maybe you are looking for