Remove title from clips in the sequence panel?

http://imgur.com/FkPhT (Where it says Kuruvi Dandana..etc)
So there is more space for the video in the editing view. I don't need to be reminded of the title on the clip I'm using..

I think my old friend Harm didn't quite understand what you were asking. A rarity for him, so be kind.
No, I do not believe that there is a way to get rid of the name of the clip.
However, if you really want to see more of the frames on the timeline (which I never do anymore, by the way) all you have to do is expand the track. See the image below. You will notice that with the expanded track, the percentage of the clip taken by the title is small enough not to matter.
If you find that your screen is too small to leave the tracks expanded like that, create a special workspace that allows you to quickly move back and forth between the standard expansion, and the stretch out expansion as seen in my image. Assign a keyboard shortcut to the new workspace and you can move quickly between views.

Similar Messages

  • I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

    I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

    You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

  • How can I reinsert the deleted audio from clips in my sequence?

    How can I reinsert the deleted audio from clips in my sequence?

    I can tell you a work around to get you going in the meantime, just may be time consuming if you have a lot of clips in the timeline.
    double click a clip missing audio
    press the go to in point and copy the timecode to notepad
    press the go to end point and copy timecode
    right click clip, and reveal in project
    double click the original in project
    paste in timecode and set in & out points again
    drag audio
    As I said not the quickest way, but it works, and won't actually take as long as you'd think, 30 secs or so per clip, i just hope you don't have over 100 clips without audio
    Troy

  • Project renames sequence and all clips in the sequence when a clip is added

    My project is renaming my sequences and the clips in those sequences whenever I add a clip. For example, I have a sequence called "dance section 2", which contains 20 some-odd clips with various names. When I add a clip named "drop from above", the name of the sequence is changed to "drop from above", and the name of every other clip in the sequence is also changed to "drop from above" (video, audio, stills, everything). When I add a clip named "spins", all the names are changed to "spins".
    The name of the sequence is changed in both the timeline and the browser, but the names of the other clips are changed only in the timeline. In the browser, they keep their old names. The exception to this is the last clip added before the name changer. For example, if I add "drop from above" to the sequence, and then add "spins", the clip named "drop from above" is renamed "spins" in the browser as well as in the timeline, but the other clips are renamed only in the timeline.
    The clips in the sequence also keep their original content - so the sequence looks the same as it did before, but all the names of the clips are changed.
    This is only happening in one project. All of my other projects are working fine.
    I've tried restarting and deleting preferences. I've also looked at the autosave vault for the project. The backup projects saved after a certain time all behave the same way, and the projects before that time all behave normally. I can't imagine what would have caused this, though, since I've been working on this project all day and nothing's happened to my computer or hard drive or anything.
    Also, there are no freeze frames at the beginnings of my sequences (I read another thread with a somewhat similar issue and getting rid of freeze frames seemed to help that person).
    I'm in FCP 7.0 on a Macbook Pro.
    Thanks in advance for your help!

    Welcome to the discussions...
    I've had this happen. My guess is that it's related to round-tripping to/from Color, but I can't be sure. IMHO, the sequence is corrupted. I just dealt with it for a while, then rebuilt it by making changes from an earlier version.
    Sorry I don't have a better solution, but at least you know you're not alone.
    Patrick

  • Crashes when adding a clip to the sequence!

    When i try to drag a clip into the sequence, a prompt comes up saying Adobe Premiere Pro has stopped working!
    Help! i have a project due in a few weeks and i cant rely on windows movie maker!
    I am running it on a HP Probook 450 with Windows 8.1 64 bit
    Thanks

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
    -HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575

  • How to make Premiere remember the sequences in the sequence panel when re-opening the project?

    I've got a project I've been editing on ( a feature film) which consists of 100 scenes which are roughly in 100 sequences plus about 100 more sequences from the dialies during the shoot. In the sequence panel I have usually a couple sequences open and of course the master. Then I save it, shut down Premiere, restart it and then later I load the project back in. The result is a complete random selection of sequences in the sequence panel (usually the old dailes) but never the ones I worked on when I saved the project. Anything I can do so that Premiere remembers which sequences I edited on when I saved it?

    You did not state what version of PP you are using. However, this was a known issue and was fixed in the 8.2.2 update. What you have to do is create a new project file in 8.2.2. and import the entire project you are having the problem with then save.
    Even though this issue was fixed in 8.2.2, just by opening and re-saving a project file will not resolve it. As stated, you have to create a new project file from within 8.2.2., import your current project then save. That will resolve it.

  • Why can't I remove attachments from emails in the Sent items folder?

    I Recently upgraded from Snow Leopard to Lion, and so far, there are at least a couple of things that puzzle me.
    One is that now I don't have the option to "Remove Attachments" from emails in the sent items folder. It seems to work normally
    in the Inbox and Drafts folders, but not in the Sent items. Go figure ???
    Another thing that bothers me is that in Preview, when I save a screen shot, or a scan, etc., I no longer have the option of saving it as a GIF
    (which, when better quality isn't absolutely necessary, is often much lower in KB or MB than a PNG or JPG, etc.. When I store lots of things as such images, I'd rather have that option.
    Any suggestions will be appreciated.

    I have now created a smart mailbox as described above (good idea), and although I have some 50 messages in my Sent box, all with attachments (waiting to be removed so I can store the messages in the proper mailboxes), the smart mailbox is empty. So, Mail doesn't recognise these messages as containing attachments.
    This led me to think that maybe Mail has been redesigned to work the way you would expect it to, at last; to contain a link to attachments instead of including them in all their bits and bytes. That would mean that the messages in my Sent box - with attachments - could be stored in local (or server-side) mailboxes without taking up extensive space.
    But then I checked the size of my Sent Messages folder inside the Mail Folder in Finder, and - whoops - it's 50+ MB. So the sent messages do contain attachments all right. And Mail doesn't recognise these, since a) the smart mailbox trick says that the messages are free from attachments, and b) the Remove Attachments menu option is disabled.
    I will have to wait for the next Mail update, and my Sent box will grow accordingly ...

  • How do I remove text highlight box in the Notes panel in Presenter 8?

    How do I remove text highlight box in the Notes panel in Presenter 8?  It moves at a different speed than the voice and is distracting.  Better not to have it at all.

    Hi,
    To disable higlighting text in notes pane is not possible in presenter 8.
    However it is possible to disable in presenter 9. 
    Thanks
    Sunil
    Adobe Presenter Engg Team

  • [svn:fx-trunk] 5140: Removing [ExcludeClass] from classes outside the package.

    Revision: 5140
    Author: [email protected]
    Date: 2009-03-02 12:09:24 -0800 (Mon, 02 Mar 2009)
    Log Message:
    Removing [ExcludeClass] from classes outside the package.
    QE Notes: None.
    Doc Notes: None.
    tests: checkintests
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/layout/HorizontalLayout.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/layout/VerticalLayout.as

  • How do I sort clips in the Project panel library (bin) alphabetically by file name?

    Two questions: How do I sort clip thumbnails in the Project Panel library (bin) alphabetically by file name?
    How do I "select" a group of 25 consecutive clips on the time line to form a group without having to click on each individual clip one at a time. The method in the Help menu about "alt" click does nothing for me.

    Sorry, I missed part 2. Unless CS4.2 has added a true "Group" function, like in InDesign, Illustrator, etc., there is not a direct way to keep Selected Clips together. However, you can put them on their own Sequence and then Nest that Sequence with others. This is often done, so that one can apply Effects "globally" to that Nested Sequence. [Note: there is no real Group function in Titler either, but for many operations, one can Select multiple Text Blocks, Shapes, Lines, etc., but there is no way to permanently "hold" that group.]
    The Alt-click in the Project Panel, for instance, will allow one to drag all to the Timeline, and the Shift-click (or lasso w/ Cursor) in the Timeline will allow one to apply certain things to that group, but the moment that any other Clip is Selected, that "group," does not exist.
    I can see a use for a real Group function, but for things like the application of Effects, one would still need to do the Nesting. Test this out by Selecting just two Clips, and go to apply an Effect - you cannot do that. OTOH, one can apply an Effect to one Clip, Rt-click it and choose Copy, then Select multiple Clips and Rt-click on those, where you would Paste Attributes. Not exactly what I think you are asking about, but the results, with just a few clicks, should be the same.
    If I missed your intent and need, let me know where I went wrong.
    Good luck,
    Hunt

  • FCP is adding clips into existing clips on the sequence?!

    This is a bizarre thing that has just been occurring since the latest update. While looking over unrendered scenes I noticed little chunks of blue (rendered) bar. Keep in mind that this is a one clip scene and there is absolutely no other video clip on the timeline. I scrub through and there is a random (or not so random, but I'll get to that) part or another clip from a completely other scene added into the clip. If you remove the clip, it is no longer there, so it has definitely embedded itself onto the clip. If you go back to the source video and look through it it is clean. So you drag the in/out selected point back onto the timeline and the phantom clip is there again.
    I had found a solution though, by removing the clip and therefore emptying the timeline I would save the project and quit FCP. Upon reopening FCP and reinserting the clip it would be 'clean'. But on revisiting the project this morning I have found the phantom clip has found its way back into the sequence. One difference I have noticed is that is has been placed a few seconds earlier than it was before.
    On a bizarre note, the phantom clips spookily have a fitting context to the clips it haunts.
    has anyone else experienced this? And do you have a reasoning why it occurs and a permanent solution to fixing/preventing it?

    The project file may be corrupted. Try opening a new project and importing the files there to see if the problem persists.
    -DH

  • Saving Clips to the Project Panel

    When I was working on a video on another machine, I was able to dragon clips from a sequence into the project panel, allowing me to save subclips for later use. But now that doesn't seem to work. I get a little + below my mouse, but it doesn't add the clip.
    I am using the trial version. Is this feature not available to me?

    If you click on the text it will bring the playhead to that position.

  • Return removed audio from clips

    I added clips to the videotrack, removed the audio from it. How to return the audio back? Thx. Sorry for eng.

    Select clip and position playhead over clip, hit F for Match Frame.
    Source clip will open in Source Monitor.
    Now you can drag the audio or do an overwrite.

  • How do you remove/add a program in the Control Panel that does not respond to the command?

    Without being installed (by me) this "Dictionary.com" toolbar that appeared and is taking up a whole line of space across the top of my desktop monitor! I followed the procedure on how to remove the toolbar precisely... Start> Control Panel > Add/Remove Programs>
    then clicked on the program > Remove which is "Dictionary.com" and the computer would not respond to the command. I cannot get it to respond to any program that I clicked on. When I clicked the "Remove" button , the area or line darkens to a light tan. and I cannot even close the menu.
    This very strange and frustrating and I don,t know what to do.
    I just want it removed or go away.
    Thank you,Jeanette Gonzales

    Try to remove some of Firefox plugins or addons, maybe there is Babylon toolbar.

  • Can't stop still images from scaling in the sequence.********

    I've tried everything at this point.
    Baffled.
    If anyone can help me figure this out.
    please do.
    I cannot get any image to come into the sequence without scaling down to 28%.
    images are 4368 x 2912 and being brought into a sequence that is 1920x816. (cinemascope)
    Help!

    FCP will automatically scale your images down to fit the dimensions of your sequence.
    You could either scale the images to sequence size before importing, (you could export using QT conversion to a form of still image, but probably better off doing it in Photoshop or wherever the images originated from)
    If you want to do any pan/scan with the images, you'd be best served to resize them to slightly larger than your sequence settings, so you've got room to move them around and scale them a bit.
    Or you could change your sequence settings to match the image dimensions (but that would affect what I'm guessing your intended output is to be)
    Hope that helps,
    K

Maybe you are looking for

  • After Effects CS5 will not open

    Hi - I've been looking through the forums trying to find my specific problem and solution, but so far no luck. I've just installed CS5 Production Premium on a Core Duo MacBook Pro that I'm pretty sure meets minimum CS5 requirements - running Snow Leo

  • Forgot my iCloud email password how do I get it reset

    When I set up my new iCloud email I thought I used my apple I'd but when I go into setting the password has less characters than my apple I'd password and I can't remember what I put (even though it was only 2 days ago) how do I reset it?

  • How do I delete images from iphoto after I export them to make room on my hd

    I have exported images from iphoto onto an external hard drive to make room for more images on the macbook pro - whenI deleted the files from iphoto page they still seem to be sitting somewhere on the laptop, number are still high and I need to delet

  • Restrict PO creation as material blck for quality reason in other plant

    Hi QM Experts, one material (say MAT-1) in maintained in  two plants (Say- X & Y). qm in procurement active in material for both the plants. created two Q-info records with material MAT-1, vendor ( Say- V-1). one info record for plant X & other for p

  • Downsizing a fat ODS to optimaze the processing time!

    Hello all, Working with SAP NetWeaver BI 7.0, a customizing FI_CO OPC ODS with 300.000.000 records extracted from Sap R/3, was enhanced with 2 new fields and since then it has generated big processing time – about 20 hrs and same times basis team nee