Remove top/bottom material.

i recentley posted a question on how to bend a wall into a half circle in cs5 extended (3d)
i got no replies, no problem. this is the nearest i can come up with.
3d shape from layer-cross section-offset.
how would i remove the top and bottom material.
regards
phil.

mylenium.
you are a star.
thank you very much for your help and replying.
once again a big big big thank you.
cheers.
phil.

Similar Messages

  • How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard.

    How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard. (I selected 'Fit to scale' and there's a huge gap on the top and bottom).

    Those margins are usually reported from the printer settings to Acrobat. Meansif you have, for example, an inkjet printer and that printer can not print seamlessly, then there will be a minimum margin.
    Check your printer's page settings.

  • IPhoto 09 - iDVD 09: black Borders left/right AND top/bottom

    Setup: Snow Leopard 10.6.3, iPhoto 09, iDVD 09, all patches applied.
    Source Material: HiDef 3:2 pictures in iPhoto, arranged in a iPhoto slideshow.
    Export: "publish to iDVD" in iPhoto - everything works fine.
    Settings in iDVD: professional quality, Always scale slide to TV Safe area: DISABLED. aspect ratio: 16:9
    Target: Full HD TV Screen 16:9
    Result: the image quality is not great, but ok. But: there are huge black borders left/right (which is perfectly fine given the difference between 16:9 and 3:2) AND on the top and buttom of the TV - which is not acceptable by any means.
    When I start the DVD on the Mac DVD-Player, there are no borders in windowed mode, but in full screen too.
    It seems as iDVD 09 simply ignores the uncecked "scale..." preset box.
    Can anyone confirm this, any suggestions? Setting up the slideshow in iDVD/iMovie itself is not an option here, hence my dad is still struggling to get things right in iPhoto

    Bengt Wärleby wrote:
    If You select to play back in a smaller window eg cmd+2 or on a TV (4x3)
    • still got the border all around ? (it's OK on my Mac (cmd+1 or 2) or on TV)
    No, it's just in fill screen mode.
    Bengt Wärleby wrote:
    This is not an iMovie or Apple problem but due to mixing 4x3 and 16x9 material
    It's 2:3 Material (DSLR Pictures), so this won't help.
    Bengt Wärleby wrote:
    You can try to make this the other way around. Start a WideScreen project and
    now You will get the bordet around the 4x3 material instead.
    Only solution is to crop or enlarg one of the material types to get it right.
    As I stated before, there HAVE to be borders for the 2:3 Material on a 16:9 Screen (unless you do some heavy cropping). But I can see no reason why there should be borders on top/bottom of ANY material. As I see it, it's a problem related to a disfuncional "adjust for TV" setting, not the aspect ratio.
    Thanks anyway.
    Any other comments?

  • Top & bottom print ie: date, web page, in margins are illegible. Content of page is fine.

    Have tried changing fonts before printing as well as margins but what prints across the top and bottom is illegible. The page contents is fine. The illegible part is what prints in the top & bottom margins: web page, date, page # etc, This does not happen when printing from Internet Explorer 9. Everything else printed in pdf format from everywhere else comes out fine

    In addition, IE doesn't handle margin: 0 auto; on divs very well. So you have to also add "text-align: center" on the body element, which will center align all elements for IE, then "text-align: left;" on the #wrapper. (It will left justify all elements within the centered wrapper.)
    Here's a very trimmed example. Notice that I also put a border on the "wrap" div, this can be removed.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Untitled Document</title>
    <style type="text/css">
    body {
      text-align: center;
      margin: 0; 
    #wrap {
      border: solid 1px red; /* so that you can see the width */
      text-align: left;    
      margin: 0 auto;
      width: 700px; 
    </style>
    </head>
    <body>
    <div id="wrap">
    </div>
    </body>
    </html>

  • I want list of materails along with approch(Top-Bottom or Bottm-up)

    Hi All,
    I am small requirement below:
    i have materials, plant and Batch nos..
    now i want list of materials , Plant , Batch no, Approch
    Here Approch means is it bottom up or Top to Bottom approach.
    i can get list of materilas from MCHA table , but how do we know this paritculer material has bottom up or Top to Bottom approach,
    Some people told me with use of FM CHVW_EXPLODE_ALL , we can get list of materials for Top-Bottom(value is B) or Bottom-Up(value is T)
    Here what is my doubt is, is there any table which contains all these values.?
    Sri

    Hi,
    Can you please provide what is the exacly name of that field name, because i checked i didnt get other then MATNR,WERKS and CHARG

  • How I add a LIBRARY ITEM to a page layout, top/bottom ?

    how I add a LIBRARY ITEM to a page layout, top/bottom ? in
    dwmr mx 2004 and cs4 ?

    Have you looked at the DW help file - it will explain all
    about library items :-)
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    CSS Tutorials for Dreamweaver |
    http://www.adobe.com/devnet/dreamweaver/css.html
    Book: Ultimate CSS Reference (aff link) |
    http://www.sitepoint.com/launch/005dfd4/3/133
    http://twitter.com/nadiap
    "lse987" <[email protected]> wrote in
    message news:gpsvtt$t5q$[email protected]..
    > how I add a LIBRARY ITEM to a page layout, top/bottom ?
    in dwmr mx 2004 and cs4 ?

  • My macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty.

    my macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty. I had to try myself as I'm overseas for two months and nowhere near any sort of help .

    there was a recent software update that seemed to screw HDV up.  Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
    Worst case scenario, do as Shane suggests.  But might I suggest you take a look at the user tips section of the forum.  there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

  • Premiere Elements 7: share/export DV-PAL in FLV/QT/WMV, black bars on top/bottom

    During export (step "share", export for "PC" - sorry, if I use some wrong terms, got a german interface) of only DV-PAL video to FLV/QT/WMV there are always black bars on top/bottom of the video and the picture is wrong in aspect ratio. I can't help.
    I tried different resolutions (original 720x576, 502x402, 320x240) and, as only possible with QT/WMV, different pixel aspect ratios (PARs), even user-defined PARs and 'wrong' aspect ratios (like 512x402). No chance. (I think precise user-defined data like "1,094" is not possible, because results did not change anyhow and this value is shown as "1".) With e.g. QT, 640x512, PAR 1,067 there are black bars with 6 px each.
    My project settings must be correct I think: DV-PAL, 720x576, 4:3, 25 fps.
    DV-PAL- and MPEG-Export/Share is no problem.
    As a workaround I export DV-PAL and convert with XMediaRecode to FLV. But I want direct and clean export with PrEl. That's what I bought it for recently.
    I wonder why there are only NTSC-setting suggested in FLV-share. I have to change the size by myself.
    And I wonder why Wikipedia says PAR for DV-PAL is "1,0940" and Premiere says "1,067".
    I'm new to Premiere Elements 7 (although I got some experience with Premiere 5/6.5, FinalCut, Cinelerra ...) using Windows XP.

    I posted two videos on muvipix.com:
    WMV cable modem settings PrEl (without audio, fps like original)
    Strange: in VLC media player there are bars on the left and right (and slight faded bars on top/bottom - hope you can see) and in muvipix.com and Media Player Classic there are bars at top/bottom
    http://muvipix.com/cpg/displayimage.php?album=lastup&cat=17219&pos=0
    http://muvipix.com/cpg/albums/userpics/17219/Unbenannt.wmv
    FLV (no resize, without audio, fps like original)
    black bars on top/bottom, but only slight in Media Player Classic
    http://muvipix.com/cpg/displayimage.php?album=lastup&cat=17219&pos=1
    http://muvipix.com/cpg/albums/userpics/17219/Unbenannt.flv
    I had to deactivate sound because this is Creative Commons stuff and I don't want to give credits. And I changed fps to "like original" because 30 fps as standard in PrEl is wrong. It's PAL here.
    Thanks for your efforts.

  • Webdynpro for ABAP - Textdirection top - bottom ???

    Hi all,
    is there any ui-element which enables textdirection top -> bottom or supprts HTML tags to realize this simple requirement ????
    Thx !!!

    I understand this, but if you implement right->Left and Left->Right you should also think about top->bottom & bottom->top, also there is a FormatedTexView with some HTML support but this has no style and can't be embedded as a Celleditor into the ALV... And also the fixed colors for ALV Cells i don't understand why there should be a limitation of colors for cells in CL_WD_TABLE_COLUMN=>E_CELL_DESIGN
    I really like and enjoy the WebDynpro for ABAP concept but sometimes i feel really sad for such limits like i mentioned because that is basic layout stuff.....

  • ABAP routine for Top 10 material

    Hi All,
    I want to write an ABAP routine to get the Top 10 material as per their sales data.
    I have written a query where I have put condition (for Top 10).
    But I need to create an APD taking this query as base query. But conditions fail to filter data when it comes into a transactional ODS via an APD.
    So, I want to write a routine for transaformation of data (to get top 10 material based on their sales data) from base query to the transactional ODS.
    Please help me in writing this code.
    I am an amatuer in ABAP.
    Thanks,
    SB

    Hi ,
    You Need to read Data from the ODS for Top 10 Materials. I can give you the Logic but you would need to take the Help of an ABAPPER to convert this into the code
    Lets consider an ODS : ZODS which has a KF for Sales Data (ZKF)
    *****Define Internal Table ****************
    TABLES :
    /BIC/AZODS
    DATA:
    BEGIN of ITAB OCCURS 0,
        0material(18)       TYPE c,
        ZKF           like /bic/AZODS-/bic/ZKF,
    END OF ITAB.
    DATA:
    BEGIN of ITAB1 OCCURS 0,
        0material(18)       TYPE c,
        ZKF           like /bic/AZODS-/bic/ZKF,
    END OF ITAB1.
    Select MATERIAL, /BIC/ZKF from /BIC/AZODS into corresponding fields of ITAB1.
    LOOP AT ITAB1
    ITAB-MATERIAL = ITAB1-MATERIAL
    ITAB-ZKF= ITAB1-ZKF
    COLLECT ITAB.
    ENDLOOP.
    SORT ITAB ZKF.
    ************this will have the materials sorted take the first 10 Material Nos*****

  • How to snap to top/bottom of mail?

    How do we get to the top/bottom of list of emails in Mac Mail?

    This was answered here: https://discussions.apple.com/message/16046210#16046210
    Thanks to the original person.

  • Keyboard shortcut for top/bottom of mailbox list

    Hi,
    I have some large mailboxes, and when in the middle of the listing it is a pain to have to scroll all the way to the top/bottom to get to the most recent messages (mailbox ordered by date).
    Home and end keys don't seem to work - is there another keyboard shortcut that can jump to top or bottom, or is it possible to do something with applescript to enable this? (I am a mac beginner so would appreciate any help)

    Is there a solution for this? I too have several people with large mailboxes who regularly need to jump to the top or bottom.
    Control/Page Up or Down scrolls the mailbox by a page, but I can't find the shortcut to jump to the top or bottom. Does anyone know what it is?
    Thanks,
    -Terry

  • When I play an iMovie at full screen, how can I remove the bottom toolbar

    When I play an iMovie at full screen, how can I remove the bottom toolbar?  It shows up on the projector screen and I don't want my audience to see those tools at the bottom quarter of the screen.

    Do a malware check with a few malware scan programs.
    You need to use all programs because each detects different malware.
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Firefox is filling the entire screen so that the controls are off the top & bottom of the screen, & I have to log off the computer to get out of Mozilla.

    Usually, there are controls at the top & bottom of the screen, & I can log off whatever program I'm in, but now Firefox is filling the whole screen: I can go from one tab to another within Firefox; however, I can't get out of Firefox without logging off the computer.

    It is possible that the screen is too high and that the title bar and status bar do not show.
    Open the system menu via Alt+Space and see if you can resize that window.
    If that works then close Firefox to save that setting.
    See also http://kb.mozillazine.org/Resizing_oversize_window
    Also make sure that you are not in "View > Full Screen" mode.
    Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
    See http://kb.mozillazine.org/Corrupt_localstore.rdf<br />
    (caution: do not delete the localstore.rdf file in the Firefox program installation folder)

  • How can I remove Top Sites button from Favorites?

    Hi!
    How can I remove Top Sites button from Favorites bar?
    There is no problem to remove it in previous Safari.
    But I cant find how to remove it in Safari 7.0.

    >>Ok, but they dont have solution.
    Correct - there's not been one found so far, that we've seen here, anyway.

Maybe you are looking for