Remove user on my hp 2000 laptop without the users info

Im trying to remove my ex from my laptop Can anybody help me please

You're very welcome.
If you are not set up as an administrator on the notebook, then you won't be able to delete the account.
Did you try a factory reset? Assuming you don't care if the files on the notebook are erased?
Reboot the PC, tap the F11 key at the beginning of the HP welcome screen and follow the instructions to do a factory reset.
If you can, then the notebook can be set up to your liking.

Similar Messages

One user unable to login to OWA - error :" The user name or password that you entered is not valid. Try entering it again." exchange 2007 SP3

Hello Guys,
exchange 2007 SP3
windows 2008 r2
we have one user who unable to login to owa with error -"The user name or password that you entered is not valid. Try entering it again."
we checked mailbox feature in EMC and owa is enable
checked adsiedit - looks good
we checked allow inheritance - checked
we reset the password and try to login to owa from exchange server , no luck
user can login to her computer and outlook without any issue
we also moved her mailbox to another server
user facing the same issue from office and VPN
any suggestion ?
Thanks
Sandip
sandip

Hello Lynn
thanks for the reply. but I already checked that and allow inheritance already checked .
when user unable to access webmail with error "The user name or password that you entered is not valid"
will it generate any event id on exchange server or domain controller ?
in our case we have mailbox and CAS on different servers
any suggestion .
Regards
Sandip
sandip

How can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvo

Hi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

Date modified of user profile can be considered as date the user last accessed the server?

Hi,
I have a terminal server with large number of old profiles.what is the Microsoft way to clear these?
Is the last modified date of user profile can be considered as date the user last logged in to this server?
Regards,
Arun
Best Regards, Arun http://whynotsql.blogspot.com/

Hi Arun,
For deleting old profiles please test the following group policy setting using gpedit.msc:
Computer Configuration\ Administrative Templates\ System\ User Profiles\
Delete user profiles older than a specified number of days on system restart Enabled
Delete user profiles older than (days) 30
It is applicable to Windows Server 2008 and later. You may need the following hotfix if you are running Server 2008 R2 (no SP1):
http://support.microsoft.com/kb/983544
Thanks.
-TP

How can I stop Photoshop CS5.5 taking control of html and pdf files without the user's consent?

Our client uses CS 5.5, and Photoshop will continuously take control of pdf and html files. This is without any interraction from the user, and after setting it back to the desired settings (pdf - Reader, html - Chrome), after some time (and doesn't seem to be related to anything the user does, restarting machine etc), Photoshop will snatch control of either or both of these extensions.
Could you please advise on how best to deal with this issue? Resetting Photoshop preferences does work for a time but it is not long before the issues arise again.

Thank you for the link, it is an encouraging read as I have not yet found anything even similar to my issue via searches.
The machine has never had a previous version of Photoshop installed, but it does have Elements, which is used for scanning documents (which are then edited in photoshop and converted to pdf there). It is an involved process.
Although I appreciate the link and your time, I'm afraid the issue in the link is the opposite issue - the other user cannot set the default, whereas my user cannot unset the default.

I bought an iPod 5 on ebay, it's iCloud locked, how can I remove it from original owners Apple ID without the owners information?

I bought an iPod on eBay, without knowing that it was iCloud locked. I contacted the seller and he said he bought it iCloud locked, and did not know the original Apple ID or password. Is there a way I can remove the iPod from the original owners ID without the original owners information?

The only way is to have the AppleID and password of the ptrvious owner.
Without that information, it is totally worthless to you. think iPod shaped brick,
Return it to eBay and ask for a refund.

Hello, I am trying to build a pizza menu where i can click on a pizza pic or link and than this selction is added to a muse email form, without the users need to retyp it. Anybody know how to do that? thank you for your help Peter

I would like to know how to add a selection form a website to an muse email form with out the user to having to enter it but only clicking on the selected item. This is for a pizza menu.

You can try this :
http://www.qooqee.com/adobe-muse-widgets/astrolabe-muse-menu
Thanks,
Sanjit

Display the shopping cart details via Monitor shopping cart without the user being mapped in organizational structure

Dear Experts,
I have a scenario where the Project/Support team members won't be mapped into the organizational structure. But they must be able to view the shopping cart details. Could you please help me in providing some clue to achieve this.
As of now, I am getting the below error if the user is trying to view the shopping cart details when the user is not mapped into the organizational struture.
Thanks in advance for your help.
Best Regards,
Bharathi

Hi Bharathi,
Make it more simple. Create a separate organizational unit for the Support/Admin team and intergrate the users there.
It's the common practic.
Regards
Konstantin

When logging on to Windows 7 user gets a second mapped drive to the users home folder

Morning,
I'm working through an issue we've discovered whilst trialing Windows 7. Our environment is setup as follows.
Domain Controllers are Windows Server 2003
Clients are Windows XP and Windows 7
Windows XP and Windows 7 Clients are in seperate OU's
All Windows XP Group Policies apply to Windows XP And Windows 7 clients, Windows 7 policies are then applied to Windows 7 clients after
Windows 7 policies are setup such that any setting defined in a Windows XP Group policy is left unconfigured in the Windows 7 Group policy and only new Windows 7 settings have been set in Windows 7 Group Policies.
We have users home folders mapped in their Account Directory account setting and set to H:\   to connect to
\\domainname\dfs\home\username
In addition we also as a fail safe map the drive via a login script using net use
This has worked fine for years in windows XP, if Active Directory failed to map the drive for any reason then the login script would then map the home drive.
In Windows 7 we have noticed a curious error. We found after a period of a couple of weeks we suddenly started getting a new drive mapped. This was identical to the H:\ drive mapping but was instead under drive Z:\. In other words, the
users home folder is mapped twice on h:\ and z:\. This is not affecting any of the Windows XP users.
I have gone through several logic reasons to ascertain why this has happened with the following findings.
1. Originally we thought the error appeared when we tried out mapping the home drive using the mapped drives functionality new in Windows 7 group policy under preferences > windows settings > drive maps. However, after forcing it to delete the
Z:\ drive using this functionality we only succeeded in removing it with a group policy present to do it. As soon as we removed that group policy the Z:\ drive came back
2. Secondly i thought the reason we would be getting a z:\ drive when we haven't specified it anywhere is because active directory is trying to map to the H:\ Drive but it is already present therefore in Windows 7 it tries to map to a different drive.
Using Windows logic it tries the highest letter first which is unlikely to be in use i.e. z:\. This makes sense because our logon script uses a net use h:\ command to map the drive and i believe by default these are set to perisistent. Therefore
the next time the user logs on H:\ is already mapped so the logic in Active Directory accounts maps the drive to Z:\ instead hence we end up with two mapped home drives. To test this i altered the login script to set the drive maps to
non persistent using persistent:no. The logic here was that when the user logged off the drive would become unmapped so that when Active Directory tried to map the drive it would be able to use H:\. Unfortunately this was not the case and
Z:\ remains.
3. Here is where i resolve the issue but i don't know why and is the bit i need answering. If i go into my account on Active Directory and go to Profile and set the home folder drive letter to another letter i.e. change from H:\ to U:\,
i get prompted to set full control etc and apply. I then set the drive back from U:\ to H:\, again i am prompted for setting full control which i accept.
NOW when i login i no longer receive a Z:\ drive and only get an H:\ drive. YAY, thats what i want, however, i do not understand why this is the case. At first i thought it might be something in the active directory logic when i login to an XP
machine and then login to a windows 7 machine.  IF you bear in mind that although i get a new profile in Windows 7 i still retain the same home folder setting. However, after logging on an XP machine logging off then logging
on a Windows 7 machine i still didn't get the Z:\ drive back.
I have tried creating a new user that ONLY receives our Windows 7 Group Policies and still they receive both an H:\ and a Z:\ drive which rules out the Windows XP policies conflicting with the Windows 7 policies.
Does anyone have any ideas why i would get a second drive mapped to Z:\ logging into Windows 7 on a Windows Server 2003 domain?
Can anyone explain in more detail exactly how the Active Directory functionality works when you specify a connect to Drive letter for a users home folder?
My current workaround is simply to add a net use command to remove the Z:\ drive. I do not want to use Mapped Network drives using the new policy settings in Windows 7 RSAT because we have already found issues with it.
<input id="3daf20bf-4f4d-4a05-86da-2c30c205d580_attachments" type="hidden" />

We had the exact same issue happen to us. No issue on Windows XP but Windows 7 mapped two home drives (F and Z). F was mapped during the login script and Z was being mapped by some unknown reason.
We use Netapp for our storage and home drives and use a feature called CIFS Home Drive Mapping. This essentially maps a user to a folder not available through normal CIFS methods causing AD to error when setting the home drive. To get around this we use
dsquery and dsmod to modify this attribute in the user account. This is the command we used...
dsquery user -name %UserNameX% | dsmod user -hmdrv F -hmdir \\filer\$username$
Notice there is no ":" after the F
We determined the root causewas the value for the
homeDrive attributefor the user account was set to "F" instead of "F:"
When we updated our users to reference "F:" instead of "F" in their user, this problem was resolved.
Use LDP or some other method to verify that the homeDrive attribute is set to "F:" (or any other letter) or you will have this issue.

Acrobat 11 pro (Creative Cloud master collection licence) doesn't save files changes only from the network and a user profile. We can't recreate the user profile due other programs setting

Steps to reproduce bug:
1. edit .pdf file from MS network (i.e a share).
1.1 Browsing the network.
1.2 Once that the file is found.
1.3 Select the file, right click and select edit with Adobe Acrobat".
2. save changes.
Results:
I get message box "document could not save because write access was not granted. only read"
Expected results: I have to save the file because the user has all rights file’s security.
Can you help me ?
Thanks in advance
Enrico

First, you should ask in Acrobat
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Second, different program, but what helps with SOME permission errors is in the link below
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)

How to find user's owner or who has created the user?

Hi all,
I want to find out owner of user or who has created the users?
example:
system has created test user.
test has created xyz user.
so i want to find out who has created xyz?
Thanks in Advance,
Sandeep.

Read below thread:
Re: is there a way to find out who created a user account?
But if you have enabled auditing then its easy one option.
Regards
Girish Sharma

User dose not have Administrative rights, however the user is set as admin

Just did an Archive & Install of a MacBook Pro 3.1, upgraded from Tiger to Leopard , original thread (http://discussions.apple.com/thread.jspa?threadID=2309825&tstart=0). I did all available updates, added it to an active directory and set all network admins to be administrators (did in root admin account). I even had the user log in and manually set their account to be administrator. Yet the user tried to update their Itunes and was prompted to submit account information, the machine didn't take their info nor did it take mine, i had to use the root admin account to upgrade the software. Is there something i'm missing here? Open to any suggestions.

no one posted to this thread
i ended up making the user a new profile and manually pulling over the users documents and files

HT201240 why are my users grayed out? I cannot edit the users

I have set up my users with their respective passwords but i am not able to delete or edit the users because they are grayed out and it shows managed on each of them.

Did you click the padlock at the bottom?

I need to get my scanner to install on my laptop without the disc.

My laptop doesn't have a disc drive so i can't install the scanner function of my printer.
This question was solved.
View Solution.

You can download the full product installation software here. No CD drive needed.
Click 'Software and Drivers' then select your version of Windows then choose "Product Installation Software" then "HP Deskjet Full Feature Software and Drivers"

Remove user on my hp 2000 laptop without the users info

Similar Messages

Maybe you are looking for