Remove UWL information areas under preview

Hi UWL Experts
I need to remove some of the information which is shown when a preview of a workflow item is displayed like “Attachments” and “You can also – links”.
This part is easily fulfilled by use of the ivew parameters; but is this possible to customize on work item level instead? Because I only need to remove these information from some of the items and not all?
Thanks in advance
Cheers
John

Hi Kai
Thanks for the input, we have some tasks form the backend which is actually does not contain attachments but are displayed in the portal as attachments.
I have looked into the standard uwl.webflow configuration and found an item called “uwl.task.webflow” is guess that this is the one which the rest of my tasks receive the standard configuration from; if I want to create a new set of settings for some specific tasks then I need to copy this ad add a new prefix like “costumized.webflow” and add this prefix to the specific task that I want to change?
From this configuration I can see that it is possible to remove links from the “you can also” section, but is it also possible to remove informations from the details display of items as well (in the same way as it can be controlled globally from iview parameters)?
Thanks in advance
Cheers
John

Similar Messages

  • My Apple ID and my iCloud id are under different emails how do I change my iCloud email to my apple email

    help I have a new email address which I have changed on my Apple ID but my iCloud email is under my old email so can't sign in, how do I change it so my Apple ID and my iCloud id are under the same email and password

    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • Remove Hidden Information tool

    Hi,
    I would have a question regarding Acrobat's 'Remove Hidden Information' tool. Under Tools, Protection there is the 'Remove Hidden Information' tool. When I click it the results can be seen on the left side. Under 'Comments and markups' the sum of objects can be seen. I figured out that it detects bookmarks, links (internal, external) and objects described here: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7e7f.w .html.
    But it also detects some other objects as well which I am not aware of (based on the number of objects detected). I also know that it counts 2 objects when using 'Replace text' from the link above.
    Does anybody happen to know what additional types of objects does this tool detects and how to search for them in the document?
    Thanks for your help,
    Csanad
    I use Acrobat version 10.1.5

    The hidden text is the collection of glyphs on the PDF page that use text rendering mode 3 (no stroke, no fill). 
    Any links placed in association with such hidden text are not "hidden" (that is not how it works with PDF Link annotations - see ISO 32000-1:2008). 
    Any Link annotation placed in a PDF are the same as any other Link annotation (with the exception, of course, of whatever the link's Action happens to be).
    So, no special sauce for links that were placed in association with now removed "hidden text".  
    In context of what you've written it may be that you will have to select - Ctrl+click the Link annotations of interest then tap the Delete key. 
    Be well...

  • Website pdf's won't open under Preview...?

    I have to save copies of documents that are on websites as .pdf files.  They always used to save to my desktop and then subsequently open under Preview.  This is not the case now - nor can Adobe Reader access them.  Any hints?

    Back up all data.
    Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
    /Library/Internet Plug-ins
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Remove hidden information without converting to RGB

    I'm preparing a PDF for one-color printing, and it has some color data off the page that's messing up our prepress process. So I ran "remove hidden information" to cut that data out, but it converted the entire file from CMYK to RGB. I obviously need the file to stay CMYK (getting it down to just K was the whole point). Is there any way to remove cropped/overlapping data without converting to RGB?

    You might try running the Preflight single fixup under Pages to "Remove page objects which are completely outside of page area" instead.

  • 'Remove Hidden Information' Message

    Hi,
    I've seen this message a couple of times, each when I tried to close my work.  That's the message box that has 3 options: 
    *close without removing info
    *remove info but do not close
    *remove info then close.
    That does that message box and the options mean?
    How can I 'see' what 'hidden' informations are??
    Hope someone can explain to me.
    I'm using Acrobat X.
    Thanks,

    The ability to remove the cropped areas used to be and option in the Reduce File Size, but it was removed several versions ago. I think it only lasted through the version that introduced Reduce File Size (AA7?). I typically refry such systems as TSN mentioned, but it is not generally a recommended technique. If you do not have any tags or markup, then the refry is fine -- a process that would remove all tags and other markup. It might be possible to put them back with replace pages, but never tried.
    I have read the redact bit in another post. I think that will remove the content of the areas, but does not reduce the size of the actual page. It is still cropped as such. I would suggest trying it on a test file and see what happens.

  • Remove Hidden Information

    Hi! I am using Adobe Reader XI and can't find the QuickTool menu on teh right side of the document. I need it because I want to use the command Remove Hidden Information from a PDF file which keeps on giving me the error code 135 whenever I edit it and try to save it. I tried to save it under a different name but didn't help! I've read in the forum to try using the Remove Hidden Information, but didn't find it Any help will be appreciated.

    May be that this function is not available in Adobe Reader.

  • When I remove all website data under settings safari advanced website data, it comes back a day later.  How do I fix this?, When I remove all website data under settings safari advanced website data, it comes back a day later.  How do I fix this?

    When I remove all website data under settings>safari>advanced>website data (remove all), the websites reappear when i check a day later.  How do I stop this?

    HI,
    Wow you must have been watching me type and hit send since it took about 1 minute for the reply. Thanks.
    Yes i understand the purpose however i still feel as though i should be able to decide for myself if i want to use them as an "option" or turn them off entirely. It's sort of akin to the "trash bin" that's not really trash, though in that instance at least microsoft and Apple listened to consumers (eventally) and allowed users to make the choice. Hey there's a thought how about Apple points the delete to the trash bin and looses the annoying popup, that way we can restore cookies? Sorry, i'm being sarcastic but in my view, if i delete a cookie or a cached web icon it's not exactly the same thing as "saving us" from deleting a spreadsheet or system files. Oh but wait in that instance i CAN delete them without having to endure the annoying "are you sure" pop up. it looks like someone missed the bus on this one. Thanks again I'll check the web for the terminal command and try and edit the tag myself.

  • How do I chat between users that are under one .mac/MobileMe family acct?

    How do I chat between users that are under one .mac/MobileMe family acct? We are all under one account, but in different locations, using iChat 4.0.5 and OS 10.5.4. Thank you.

    The only way is to create separate accounts under either AIM or Jabber (for example Googletalk). Then everybody logs into iChat with a different user and you can have full iChat functionality (except encryption which works only if you have different .mac accounts). If some members of your family have already a gmail/googlemail account then they can use this account information to log into iChat if you create a Jabber account with the gmail user information. Otherwise go to www.aim.com, request a screen name and use this user information to create an AIM account in iChat.
    Have fun.

  • I am using a 5D Mark II and I am getting a series of three curved lines on the photos that are under

    I am using a 5D Mark II and I am getting a series of three curved lines on the photos that are under exposed only.  Can anyone help me figure out why it is doing this?

    Everything on the sensor is going to be organized in rows and columns. You can get a bad pixel or a column of bad pixels... or perhaps even a block ... but not a curve. If you're seeing a curve then certainly there must be something else causing this.
    The camera does have two internal filters in front of the sensor, but those are flat and would probably not be the source of a curved reflection.
    If you are confident this happens with more than one lens, then I might remove the lens and use the menu system to put the camera into manual "sensor cleaning" mode. This really just causes the mirror to swing clear (to the roof the chamber) and also causes the shutter door to open and expose the sensor (although the sensor is actually powered down when in "cleaning" mode). This would allow you to visually check to make sure nothing is hanging in the light path.
    I would normally suspect the problem is caused either by the lens or possibly by a filter mounted on the front of the lens (do you use any type of UV filter or other filter when this happens?) The lens itself is curved glass... but since a "filter" would be flat glass in front of the curved glass, a reflection off the curved glass can bounce back off the filter and into the camera. Many "ghosting" problems are caused by the use of filters (and these can be eliminated by removing the filter or reduced by using filters with anti-reflective coatings.)
    Hopefully you can the solution -- but I would probably be looking at the optics as I suspect this is not related to the camera body.
    Tim Campbell
    5D II, 5D III, 60Da

  • Want to remove debug information

    Hello everyone,
    I am wondering how to remove debug information (for example, System.out or System.err) automatically when I build/compile a Java project? Does Java compiler or build tool has such options when we build/compile a Java application?
    Thanks in advance,
    George

    The resource you recommended is very helpful. If I
    can not use 3rd party libraries in my application,
    are there any other approaches to remove debug
    information?
    regards,
    GeorgePls be forewarned that this is not perhaps the cleanest way to do it, but it will work.
    //begin with writing our own utility that prints to the console
    package com.mylogger;
    class MyLog
       private final static Printwriter out = new PrintWriter(System.out, true);
       private static boolean shouldPrint;
       static
              //read a property from a config file
              //the property should be set to true for say development
              //and false for say production
              Properties props = new Properties();
              props.load(ClassLoader.getSystemClassLoader ().getResourceAsStream("path to your config file"));
              boolean shouldPrint = Boolean.valueOf(props.get("shouldPrint")).booleanValue();
       public void log(String str)
              if(shouldPrint)
                      out.println(str);
              else
                     //do nothing, no output statements to console
    }hope this helps.
    tx,
    ram.

  • Hi, I had registered my credit card a week ago on Apple.and then that day  I remove all information about credit card off  my apple acount.but today i learned that  2 dollars payment has been given off my credit card.but I never  buy any paid apps.Each ti

    Hi, I had registered my credit card a week ago on Apple.and then that day  I remove all information about credit card off my apple acount.but today i learned that  2 dollars payment has been given off my credit card.but I never  buy any paid apps.Each time I was looking up my Itunes on pc , but there was always a 0.00$.so I do not know what to do now.please help me.check it . what happened and where is the 2 dollars? Please .

    Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
    The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
    Its a shame you have to go through what you going through.
    Good Luck

  • I have applied the icloud on my sisters id accidently. How can I no w remove this information and set up my own Icloud on another computer with out loosing either of our information from the phone

    I have applied the icloud on my sisters id accidently. How can I no w remove this information and set up my own Icloud on another computer with out loosing either of our information from the phone.

    Please read before going through with this procedure.
    If you really want your contact back and you did not do another iCloud backap since you deleted some of your contacts, you can do a hard reboot on both devices with iClouded contacts by holding down the home and lock buttons on each of them for 10 seconds ignoring the slide to turn off thing. Make sure you have iCloud contact services off before doing so. You can then go through the whole set up process until you get up to the backup part. You then press to restore from an iCloud backup (make sure you choose the right backup for the right phone). If you didn't make an iCloud backup before the contact incident, you will have to use your two-month-old iTunes backups. Each phone should have their contacts the way they were from your last backup. You then go into Settings>iCloud>and turn off contacts. You then can choose if you want to keep your current contacts or not. Turn this off on both phones just incase you add another iCloud device to the mix later on. Now your contact lists are no longer linked (Caution: side effect may include lack of edit button). You may now add and delete contacts as you please without it happening on your other phone.
    Thank you for choosing Apple.

  • What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple. We want to host the app elsewhere. How do we host our DPS app on our client's website?

    What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple to approve. We want to host the app elsewhere. How do we host our DPS app on our client's website? Thanks.

    Unless I misunderstand the question, you can't do what you're asking to do. Apple doesn't allow you to bypass their store and host public apps on a website. The exception is an enterprise app, which requires an Enterprise account with both Apple and Adobe. This type of enterprise app can be distributed only within the company. If that's what you want to do, you can learn more here:
    Digital Publishing Suite Help | Creating viewer apps for private distribution
    Distributing enterprise iOS viewer applications with Digital Publishing Suite | Adobe Developer Connection
    Another option is to add the development app to several devices and use those for your demo.

  • Removing the business area from the WBS element

    Hi Experts,
    I have created the WBS element with business area. Then created the PR against that WBS element , converted the PR's to PO's.
    Now I want to remove the business area from WBS element.
    Now as Business area field become grayed out hence I canot remove the Business area from WBS element.
    Hence I have cancelled the PO's then Cancelled the PR's. So now there is no actual cost & no commitment exists against the WBS element.
    But still Business area field is grayed out for that WBS element.
    Could you please let me know how to remove the business area in this case ???
    Regards,
    Pradip

    Hi,
    Once BA is grayed out then you can not change the same, this is sap std. behavior. Here you can lock the existing wbse which having wrong BA to avoid further actual postings.
    Create new wbse with correct BA & then create pr & po.
    Regards,
    Sandeep

Maybe you are looking for