Remove Vibration from Alarm

I am new to iOS and using iPhone 4S (iOS: 7.0.3). The phone vibrate when the alarm ring starts and I find no way to disable the vibration from the Alarm.
Also searched on internet and no answer that helps to solve this. Does iOS is designed to force having vibration on Alarm?
Thanks.

Thank ckuan for your input, but that will stop vibrating the phone on ringtone as well, which I dont want. I want it should only stop while alarm.

Similar Messages

  • How to remove switches from a fabric.

    We have a couple of MDS9120's and a SUP1 9509 in our fabric that we want to retire.   I'm pretty sure that I don't want to just shut down these switches, unplug the cables and call it good.   Also the 9509 is the principal for two of our larger VSAN's and one of the 9120's is a principal for another that we are still using.  Also, this same used to have an IVR zoneset which I think is gone, at least I don't see it when I look at IVR.  Current all the switches in the fabric are running 3.31c code.  Since we are planning moving to the 4.x we want remove these since they will not be supported.
    So, what is the procedure to make another switch the principal of a VSAN, and once a switch is no longer a principal what is the procedure for cleanly removing it from the fabric?     If someone has some insights or can point to me to documentation that covers this, it would be greatly appreciated.
    Thanks,
    Jeff Blomendahl
    University of Kansas Medical Center

    In case anyone is still interested,  I opened a TAC case on this because I could see that the information was all out there, but I wanted to make sure that I didn't miss anything that would bite me.  It turnes out that it wasn't that big of a deal if you do it correctly.
    To remove a switch that is the principal for a VSAN, as was mention earlier in this thread, you need to give it a lower priority and give the switch that you want to make the principal the highest priority.  In our case, the "old" switch had a priority of 1 for 3 of our VSANs, so I changed it to the default of 128 and on the switch that was to be the "new" principal, the priority was set to 1.  Assuming that you are in config mode on the switch, the commands from the CLI looked like this:
    On the "old" switch:
    fcdomain priority 128 vsan xx   (xx being the number of the VSAN, this sets the switch priority to the default of 128)
    fcdomain restart xx     (again, xx being the number of the VSAN,  This will non-disruptively restart the vsan on the switch and change the priority.  Be aware that if you are using static domain ID's the restart may be disruptive on the switch, check the documention for more on this)
    On the "new" switch:
    fcdomain priority 1 vsan xx   (xx being the number of the VSAN, this sets the switch priority to the highest priority, 1)
    fcdomain restart xx     (again, xx being the number of the VSAN,  This will non-disruptively restart the vsan on the switch and change the priority.  Be aware that if you are using static domain ID's the restart may be disruptive on the switch, check the documention for more on this)
    Do this for every VSAN that the "old" switch is the principal and also on the "new" switch that is to be the principal.  From what I saw in the Domain Manager this will change the priority but won't necessarily change the principal assignment.  At this point the "old" switch is ready to be removed from the fabric.  Obviously, since this switch was the principal, you'll want to make sure that all of the zoneset information for those zones has been replicated to the other switches in the fabric, particularly to the switch that is to become the new principal.  Other than an ISL to the rest of the fabric and the connections to the management ports, there was nothing connected to the "old" switch. 
    At this point you can shutdown the ISL to the "old" switch from the switch that is on the other end of the ISL.  At this point you will see the fabric segment (as viewed from Fabric Manager)  At this point, I unplugged the management cables from the "old" switch, since I didn't want it talking to the Fabric Manager anymore.  I purged the switch and after about 5 or 10 minutes the segmentation went away and the fabric returned to normal, less the "old" switch.    There was no disruption to any of the 240+ hosts that were on the affected VSANs and the switch with the priority of 1 became the principal just like it was supposed to.
    I think that once the ISL has been brought down, you want to take the switch off of the network or shut it down so that it can't continue to talk to the FM.  If this isn't done, FM will see that there are VSANs on that switch that are disconnected from the rest of the fabric and will show that the fabric is segmented.  I went through this procedure successfully on a SUP1 MDS 9509 and a MDS 9120 that were running 3.3.1 code.  One thing that did make my heart stop for a second was when I went to look at the zonesets after the segmentation cleared up.  The zonesets were there, but the zones were gone!   Since my pager wasn't vibrating out of the holster, I reasoned that the zones were still there.   A quick look at the configs on the switches confirmed this.  What had happened, was that the switch that I removed was the seed switch for FM when it discovered the fabric.  To correct this I restarted FM and rediscovered the fabric using the "new" principal switch as the seed switch, and all of the zones were back were they were supposed to be. 
    Just for your piece of mind (read CYA), I recommend opening a TAC case just to have them look over your configs and make any recommendations.  In our case, we had to remove IVR from one of our switches and the engineer pointed out a bug that can occur when removing IVR, and a work around for this bug.
    Sorry for the long post, but I hope that this information is helpful to someone else that has to do this.
    Jeff Blomendahl
    Enterprise Systems Engineer
    University of Kansas Medical Center

  • Edit/remove cards from lock screen - Lollipop update

     Hi, 
    is it possible to edit or remove cards from the lock screen ? ? If so, where do i do it? ?
    Tank you. 

    no that was not it - I eventually found out by a thorough review of the user guide Settings - Sound & notification, When device is locked Don't show notifications at all. However, I came across a new problem: When the setting above is activated the icon(s) from incoming notifications is hidden by the mobile service provider icon in the status bar when screen lock is on. When the screen is unlocked the icon from the incoming notification is showing. It is not possible to manage the mobile service provider icon like fx. alarm, wi-fi, clock etc.. I have tried 'To manage status bar icons' from the user guide Do you know if it is at all possible to remove the mobile service provider icon from the lock screen ?

  • How do i remove money from 1 itunes account to another ?

    How Do I Remove Money From One Itunes Account To Another ?

    See:  More Like This    To the right -->

  • I've had three laptops all connected to my itunes account, one was stolen, the other broke, how can I remove them from my itunes account?

    So, in three years, after getting an iphone and an apple account I've had to replace a laptop twice due to theft or damage. When I link my phone to my new computer, it asks me if I want to connect the computer with the phone and I say yes, but you can only have 5 devices connected to one account, since one was stolen, and the other laptop broke, how do I remove them from my account??

    De-authorise all, then authorise the one you still have.

  • How can we remove items from the VF04 list?

    We have a long list of items in VF04 that, for various reasons (some process related, some due to errors), are not to be billed. We have looked at applying filters to the list but there is nothing really suitable to hide these individual documents e.g. we could filter out some dates where none of the items on that date are to be billed but other dates have a mix of items we want to bill and others we don't.
    I have done a search of this forum but didn't find a previous topic with a quick and simple method to remove items from the list .
    Is there a method, other than billing them or sorting each issue individually, to permanently remove individual documents from the VF04 list?
    Thanks in advance for any help.
    David

    Hi,
    David,
    Download a list of Pending delivers doc form VF04.
    Paste the list in T.Code : VL09 (Delivery reversal) and reverse the delivery.
    Then go to T.Code: VL06G Select the list of deliveries that has been reversed, select/delete all un- wanted deliveries.
    This way you can remove all unwanted pending deliveries forn Billing due list (VF04).
    Thanks & Regards,
    R.Janakiraman

  • What steps do I take to give my husband my older IPAD w/o removing him from my Apple account?

    I recently bought a new IPAD2.  All personal data and APPS were transferred from my older IPAD to my new one at the time of purchase. I'd like to give my older IPAD to my husband w/o removing him from my Apple acct.  Apple's support does not provide instructions for my situation.  Does anyone have suggestions as to what steps I should take?

    What you might need to do depends upon how you want the old iPad to be for him.
    If he will be using your iTunes account for any purchases/downloads from the store then he can continue to be logged in with your account in Settings > iTunes & App Stores. If not then log out of your account by tapping on your id in there, and he can then log in with his own account - any apps and other store downloads that you leave on the iPad will remain tied to your account, so only your account will potentially be able to redownload them and/or download updates to your apps.
    To use his own account for Messages he can log out of your account via Settings > Messages > Send & Receive - tap on your id at the top of that screen and select 'sign out' on the popup. He can then log in with his account. Similarly for FaceTime : Settings > FaceTime (tap on your id on that screen). And (if he wants to back up his content to his own account) : Settings > iCloud > Sign Out
    If you want to remove all content from the old iPad so that he can start afresh with it, then Settings > iCloud > Sign Out, and then Settings > General > Reset > Erase All Content & Settings

  • How to remove Userscripts from Greasemonkey without enabling Greasemonkey? (I have deleted files from user/gm_scripts/ didn't help)

    I installed an addon named Chat Resizer, which is for Kongregate, restarted to finish the install and firefox would not open.
    Clicked it and clicked it nothing, Opened Task Manager, Ended the firefoxes and tried to open it again but nothing again.
    Started FF in safe mode, cannot remove chat resizer with greasemonkey disabled, trying to enable it to remove it firefox refuses to start.
    Uninstalled greasemonkey, FF works as normal, install it and it freezes once more.
    Removed files from user/appdata/roaming/mozilla/profile blah blah/gm_scripts which had files for all of my scripts in them,
    Firefox still won't start, uninstall greasemonkey, works again, install, doesnt work even with files for the scripts gone.
    Any more suggestions?

    Hello,
    I found this tutorial, i think must works:
    [http://ooiks.com/blog/mousehunt-autobot/install-uninstall-user-script-on-firefox How to Install and Unistall User Scripts Greasemonkey]

  • How can i update/Remove Items from AR Invoice using SDK?

    Hi All,
    I have 1 problem with update or remove item from sales order. here is the source code of mine.
    If inv.GetByKey(DocumentNumber) = True Then
                        inv.CardCode = cardcode
                        Dim ercode As Integer
                        Dim ind As Integer = 1
                        For Each drow As DataGridViewRow In gv.Rows
                            If gv.Rows.Count = ind Then Exit For
                            ercode = drow.Cells("No").Value
                            inv.Lines.SetCurrentLine(ercode)
                            'inv.Lines.ItemCode = drow.Cells("itemcode").Value
                            'inv.Lines.ItemDescription = drow.Cells("itemname").Value
                            inv.Lines.Quantity = drow.Cells("qty").Value
                            inv.Lines.Price = drow.Cells("price").Value
                            ind = ind + 1
                        Next
                        errorcode = inv.Update
                        If errorcode <> 0 Then
                            PublicVariable.oCompany.GetLastError(errorcode, errorsms)
                        Else
                            errorcode = 0
                        End If
                    Else
                        errorsms = "Not found Invoice Document Number"
    End If
    After update, it error "[INV1.Quantity][line:1],'Field cannot be updated (ODBC -1029)'"
    Does anybody know about this?
    Thanks
    TONY

    Hi $riniva$ Rachumallu,
    This is my mistake that not test manually in application.
    Thanks
    TONY

  • Best app to remove duplicates from iTunes 2014

    Hi All,
    I've been trying to research the best application to sort and remove duplicates from my iTunes library. I have over 7000 songs and iTunes built in duplicate finder doesn't look at the track fingerprint, which is useful for those songs which are labelled "Track_1" etc.
    Has anyone reviewed any recent products? I was looking at TuneUp, but after reading so many negative comments, I've decided not to go down that path. I would prefer a program that did most of the work for me, due to the amount of songs. Happy to pay for a good product...
    I do have MusicBrainz Picard, which has done a great job of tagging, but don't remove duplicates.
    Thanks in advance :-)

    Tune up is a great app.  When they moved from version 2 to version 3 is when it went to crap and all heck broke loose.  They shut their doors  but they have since re opened and went back to developing  version 2.  I use that version and I am pretty happy with it as being an overall cleanup utility.  I also use Musicbrainz and a couple of other utilities but in the end if you have an enormous library 20k plus then you are going to have a few slip through.  I would probably go with Tuneup if I were you and a thorough third party duplicate finder.  Dupe Guru's music edition seems to do a pretty good job.

  • How do I remove pictures from my iPhone that can't be deleted?

    How do I remove pictures from my iPhone that can't be deleted?

    What pics?
    This is very vague.
    If you mean pics that you synced to your iphone form your computer, then delete them the same way. Open itunes, connect iphone, select what you want to be on your iphone, sync.

  • Hi I am having problems removing mail from trash folder. Can anyone help please

    Hi I am having problems removing mail from trash folder. I can send mails to the folder but cannot delete them permanently from the trash folder. I am using Iphone 3G and anm up to date with OS. Can anyone help please

    Check that there isn't a different Trash folder to the one with the proper Trash symbol on it.
    If you see one in your list of folders rather than a separate one, highlight it, then click on Mailbox...Use this mailbox for...Trash

  • Updated iTunes and now can't remove songs from my iPod - please help

    I've updated iTunes to version 11.0.0.163 and have an iPod Nano 16gb 5th generation.
    In iTunes, I'm no longer able to manually select songs to remove them from my iPod - I can't even see the list of music that's on my iPod. The only option it gives me is to sync, and I don't want to do that. Before I upgraded iTunes, it was easy to move music between my iPod and iTunes, now I can't - what's happened?
    My iPod is full so I want to remove some music, not all of it. Any advice? Please help - I'm going round in circles!
    Thanks

    Ctrl + B for show Top Menu
    View > Show Sidebar
    itunes will now look more like itunes 10.
    You can click on your device in the lefthand window as before
    You may prefer to use the Music Sync page to select or deselect Playlists, Artists, Albums etc and click apply.
    Delete your files is enabled by ticking the Manualy manage music option on the Device Summary page. You may have to scroll down to find it

  • I am having trouble removing songs from my iPhone.  i have unchecked songs in the library on my mac, but they still show up on phone after syncing.  how do I remove them?

    I am having trouble removing songs from my iPhone.  i have unchecked songs in the library on my mac, but they still show up on phone after syncing.  how do I remove them?

    Hi asims01,
    Welcome to the Support Communities!
    The information below may be able to answer your questions about how to delete songs from your iPhone:
    Deleting songs downloaded to your device
    Tap the Music app.
    Tap More > Songs at the bottom.
    Scroll or search for the song you would like to delete from your device.
    Swipe right to left on the song, and then tap Delete.
    Note: You must be in Artists, Songs, or Albums view to delete songs from your device. Deleting from a playlist won't remove a song from your iOS device.
    Also, this information can be found on page 64 of the iPhone User Guide for iOS 7
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
    If you have iOS 7, this will delete the song from local storage, but the song will still appear with a cloud symbol in the Music app, as you've noticed. To hide the iTunes in the Cloud purchases, navigate to Settings > iTunes & App Store, and disable "Show All: Music”
    There may be a few orphaned songs on your iPhone that were partially downloaded or corrupted in some way. If that is the case, you can erase all of the music from your phone.  Follow the instructions below and select the Music app under Usage:
    iPhone, iPad, and iPod: Understanding capacity
    http://support.apple.com/kb/ht1867
    I hope this information helps ....
    - Judy

  • I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?

    I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
    Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
    This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
    This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
    The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
    If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
    I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
    I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
    https://support.apple.com/en-us/HT201322
    A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
    In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
    Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
    If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!

    My apologies for the lack of photos, here is my post again with photos.
    I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
    Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
    This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
    This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
    The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
    If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
    I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
    I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
    https://support.apple.com/en-us/HT201322
    A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
    In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
    Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
    If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!
    iPhone 6, iOS 8.3, Also an issue on my iPad mini iOS 8

Maybe you are looking for

  • How to create a record of quiz takers details

    I am new to Captivate 5 and have created a quiz. How do I record the quiz takers details and have those details sent to me via email on the complection of the quiz so I can record who has taken the test. Thanks for any help in advance.

  • My iTunes Library is arranged with Artist as "Last Name, First Name"

    So John Mayer songs have the artist field as "Mayer, John" (without quotes). I have a large physical CD collection arranged this way and it is the way I think. I have 10K+ songs tagged this way (although it doesn't impact a band name like The Beatles

  • Converting PDF to Word document help

    I created a fillable PDF form for others in the office to fill out. When I get all the forms back I need to combine them all into one Word document. I am able to Save As a docx but when I import the form into Word I get the blank form, no data comes

  • Status blocked with workflow in purchase order

    hi colleagues I have a purc.order with status blocked at release indicator I don´t know why is 'blocked , and not released or rejected the release code says sap workflow what should I do? thanks

  • The woes of multithreading and writing a scheduler

    Hi Gurus I had no idea where to put this particular question but i fugured this should be the best place( moderators if this is not so please transfer this to the appropriate forum) My problem is that of writing an age old task of a schedualar and ju