Remove View Link in CUP emails

Hi,
  We would like to remove the View link which comes with the emails sent to the approvers. Problem is that this link is taking the approver to the CUP URL and then he/she is asked for username and password. We have created iview for CUP in portal and authentication should be done via portal and want the user to click on the link for Portal. Can anyone kindly suggest as to either how we can remove this link from emails or can modify the URL embedded to this link to the Portal URL instead of CUP.
Regards, Ben

Hello Ranjiv,
I tried to put the following URL in the application URL:
http://SERVER:PORT/irj/portal
However, when the email is sent i get the following link in them:
http://SERVER:PORT/irj/index.jsp?verifyApproverLogin.do%3FQUUuY252QXBwcm92ZVJlcXVlc3Quc2NyUmVxdWVzdERldGFpbHMubG9hZFJlcXVlc3REZXRhaWxzRnJvbUVtYWlsLmRvP3JlcXVlc3RObz00NjUmc3RhZ2VOYW1lPU1BTkFHRVI%3D
http://SERVER:PORT/irj/index.jsp?loadRequestStatusSearch.do
CUP is embedding the additional URL after the Portal URL in the mail.
How can i get the application to send only the Portal URL. or any other way using which the email directs the user to the portal.
Regards, Ben

Similar Messages

  • Need help I have iPhone (iOS x 7 was the last software update ) I need to install a flashplayer to view links in my email but I don't know which product try or which one works for my mobile device iphone 4....plz help

    Need help I have iPhone (iOS x 7 was the last software update ) I need to install a flashplayer to view links in my email but I don't know which product try or which one works for my mobile device iphone 4....plz help

    Hi shannonr98244154,
    Flash player is not supported on mobile devices
    -Varun

  • Add/remove view links at runtime !?

    Hi,
    how can i add/remove a view link to an already published RowSet and make the RowSet adapt to the new condition ??? (without loosing it's own linked Details)
    The scenario: I have lot's of details which are linked to the same master. I remove the details from the session (sessionInfo.removeRowSet) when I don't need them to keep the active number of views in the session as small as possible ! When removing the Details from the Session I also have to remove their links to the master (to avoid exceptions). Further I want to establish the links again when the detail is added to the session again !?
    I add links before publishing:
    ViewLinkInfo view_12aLink = new ViewLinkInfo(master, "package1.LinkDef");
    view_12a.addMasterLink(view_12aLink);
    I can remove links after publishing with:
    view_12aLink.removeViewLink(sessionInfo1.getApplicationModule());
    but how to establish the link again ?:
    ApplicationModule appMod = ....;
    ViewObject vo = appMod.findViewObject(view_12a.getQueryInfo().getName());
    view_12aLink.createViewLink(appMod,vo);
    doesn't work !
    if (view_12a.isOpen())
    view_12a.close();
    view_12a.addMasterLink(view_12aLink);
    works !, but all the links where view_12a is master are broken !!!!
    So what to Do ????
    Thanks for every answer !
    null

    Your results are as expected per the imlementation. Basically you've established (two) ViewLinks between two sets of two instances of VOs.
    Now you try and get an accessor to return a set of details. You need to establish a link between that detail set and it's details to use the accessor on the second detail to get the desired results. Basically you've to establish the chaining between appropriate instances of VOs and not just the outer VOs or VO members of your AM.

  • Remove automatic links in yahoo email

    Skype automatically adds blue links to     Call     Send SMS     Add to Skypeand the black text "You'll need Skype CreditFree via Skype" at the end of my yahoo email signature right after a link to my LinkedIn page. 
     I saw other solutions saying to uninstall the Click to Call Add-on.  When I went to do that the add-on was not installed so I uninstalled skype completly but this did not solve my problem.  Then I loged out of yahoo email and back in but I am still getting the skype links adding themselves to my email even though I deleted Skype!!  How do I remove this?

    mine worked for several days than quit again today? Went to Google Chrome and it works fine.

  • SOA 11.1.1.3 Removing footer link from Email notification

    Hi,
    I need to remove the "Please access the task in the Workspace Application" link in the SOA email notifications.
    I dint find any options to remove this link (checked in email notifications advanced options).
    Any pointers on how to remove this link.
    Regards
    Vicky

    vicky wrote:
    Hi,
    Thanks a lot. This is the one I am looking for.
    vickyBuy me a coffee when you meet me the next time! :-P
    Glad that it helped!

  • GRC CUP how can i remove  auto link "view" display from email configuration

    Hi,
    When approver/manager gets email.They get display "view" as a link to process the request. How can i remove this and put a full link in email configuration of stages workflow.
    Thanks
    Yakoob.

    Hi,
    I have a similar query on this. We have a clustered environment for our production GRC CUP system. Access to the CUP system is via a load balanced Webdispatcher.
    My question is, when a notification e-mail is sent out from CUP, the "View" link is showing a direct link to one of our clustered server instead of the Webdispatcher link. How can we customize the "View" link?
    We need to ensure the approvers are able to access the link via the webdispatcher so that when a failover in the cluster occurs, they are not affected.
    Thanks.
    Regards,
    Daniel Wong

  • How can I print out CC invoices ? I receive a link in an email from Adobe but I am not allowed to view my invoices ???

    I receive a personal link in an email from Adobe telling me that my account has been charged, but I am not allowed to view my invoices ???

    Go to adobe.com. If you're not already logged in with your adobe id, log in. Under your name you should see a small button that says "manage account." Click it. Next select "Plans & Products." Under the Plans section, click "Manage Plan." On the new page, on the right is a "Billing History" section (it may take a second or to two to load to invoice info). Click the small print icon all the way to the right. You'll get a PDF form that you can download or print. Good luck.

  • The message cannot be seen on incoming emails.  I can only view the message if I click on reply.  Also any links attached to email will not open.  I have tried everything to solve the problem but not able to.

    A message cannot be seen on my incoming emails.  I can only view the message if I click on reply.  Also any links attached to email will not open.  I have tried everything to solve the problem but not able to.

    Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • CUP email message link 5.3 GRC

    Hi,
    I have another problem setting up the CUP, this time with the link that CUP sends the user, directing the user to the "Request status search" link. The exact link is:
    http://cvifxpsol.ks.franke.world:54000/AE/index.jsp?loadRequestStatusSearch.do
    However, if the user clicks on this link, they are directed to a version of CUP, which to my eyes looks to be slightly different than the one in which I am working (below). None of the requests work from this link such as firefighter etc. The actual link I want to direct the users to is:
    http://cvifxpsol.ks.franke.world:54000/AE/index_apr.jsp
    Now, I was not involved with the set-up of this GRC system, but does anyone know:
    1. What the difference is between the _apr link and the first one. It may sound crazy but I believe the first link is possibly an older version of GRC that does not work properly. The strange this is when you log off from the 2nd link (the correct one), it redirects to the 1st link(the wrong one), which gives me a problem again as if a user is following my documentation and then logs out, he will be redirected to the wrong area.
    2. How can I change the link in the email to direct the user to the correct area of GRC?

    Sorry to say Ben, but this links have nothing do with Workflow. The following link is sent to requestor so that they can check the request status. You are not suppossed to create request from that link.
    http://cvifxpsol.ks.franke.world:54000/AE/index.jsp?loadRequestStatusSearch.do
    The link below is for approvers to approve request so requestors do not need to and would not know about it.
    http://cvifxpsol.ks.franke.world:54000/AE/index_apr.jsp
    The main link to AE/CUP is http://cvifxpsol.ks.franke.world:54000/AE/
    You won't be able to change the email link send out by CUP as these links are hard coded into the tool.
    Alpesh

  • Unable to view links in email. Email is defined as 'Hotmail'. My IPhone 4S works fine. Both devices has been upgraded to IOS7.

      Unable to view links in email. Email is defined as 'Hotmail'. My IPhone 4S works fine. Both devices has been upgraded to IOS7.

    Calendars (and contacts) can "sync" between your MBP and your iPhone through iCloud because they really live on the iCloud servers and the two devices are clients. iCloud can accomplish much the same trick for email messages because the email really resides on iCloud email servers.
    If the email resides on some other server, that server is responsible for whatever syncing will be done. IMAP servers like the iCloud servers are built for such syncing; other mail servers may or may not be. iCloud would not be involved with email other than iCloud email.
    I understand Hotmail has been changing how their email servers are accessed. Check with Hotmail support for any changes you may need to make to keep up.

  • When I close a link in an email I'm taken out of the email program and safari.  To view t  To view the next email I have to open Safari and the email program each time.

    When I close a link in an email,  I am also taken out of the email program and Safari.  To view the next email I must reopen Safari and the email program each time.

    Empty the Safari cache by pressing Command + Option + E on your keyboard.
    Quit and relaunch Safari.
    See if that made a difference.
    If not, from the Safari menu bar click History > Clear History
    Quit and relaunch Safari to test.

  • Can't open CUP link directly from email notification ( GRC 5.3 )

    Hi Everybody,
    I am working for a client where GRC 5.3 is installed.
    When we submit a user request in CUP , a link is automatically generated in a mail and send to the manager/ approver based on the workflow. But the problem is that client is not able to open the link directly from the mail. They need to open it everytime manually through browser. This happens in Dev system only. Where as in Prd system they do not face any issue. They can directly open link from mail automatically send from CUP.
    Can someone guide where is the problem in terms of setting because Dev and Prd is behaving different way.We are unable to find exact location where we need to make change in Dev grc. Please help.
    Regards,
    Kakali

    Hi Kakali,
       You must have different configuration Dev and Prd. Can you check the application and redirection URL link under SMTP server link? I think the problem resides there as CUP uses those links in the email.
    Regards,
    Alpesh

  • Disable or Hide "View" Link in Reports

    Hello,
    Is it possible to disable or hide the "View" link from the Reports listing?
    I will schedule the reports and the users should only be able to login, go to the History and download the report and not login and click "View" from the Reports listing page.
    Thank you.
    rkingmdu

    Tim,
    I read through your blog. It talks about "run report online" option. But, I still can't seem to find it. My BIP version is 10.1.3.3.1.
    Is it under Runtime Configuration-->Properties link? I do not see any "run report online" property under that. Also, the delivery options I have are
    Printer, FAX, Email, WebDav, FTP and CUPS server. Where is the HTTP option?
    Thanks
    rkingmdu

  • View Link on two programmatic view objects

    Hello,
    I use Build JDEVADF_11.1.1.1.0_GENERIC_090615.0017.5407
    I have two programmatic View Objects with data from other sources (an ArrayList in my example).
    Now I would like to create a View Link on it. How can I do this?
    I'm quite new on Java and ADF...
    I know it is possible because I already found Steve's example 132 here [http://blogs.oracle.com/smuenchadf/examples/|http://blogs.oracle.com/smuenchadf/examples/]
    But could somebody create a simple example based on my example classes below (which is understandable for a newbie like me ;-) ?
    Has been asked already here, but I did not found a solution as yet.
    Error with view link and ADF table Tree
    This is my example code for the view objects:
    Employee.java:
    private Number empno;
    private String ename;
    private Number dept;
    with getters and setters...
    Department.java
    private Number deptno;
    private String dname;
    with getters and setters...
    public class StaticDataDepartmentsImpl extends ViewObjectImpl {
    int rows = -1;
    private List<Department> departments = new ArrayList<Department>();
    protected void executeQueryForCollection(Object rowset, Object[] params,
    int noUserParams) {
    // Initialize our fetch position for the query collection
    setFetchPos(rowset, 0);
    super.executeQueryForCollection(rowset, params, noUserParams);
    // Help the hasNext() method know if there are more rows to fetch or not
    protected boolean hasNextForCollection(Object rowset) {
    return getFetchPos(rowset) < rows;
    // Create and populate the "next" row in the rowset when needed
    protected ViewRowImpl createRowFromResultSet(Object rowset,ResultSet rs) {
    ViewRowImpl r = createNewRowForCollection(rowset);
    int pos = getFetchPos(rowset);
    populateAttributeForRow(r, 0, departments.get(pos).getDeptno());
    populateAttributeForRow(r, 1, departments.get(pos).getDname());
    setFetchPos(rowset, pos + 1);
    return r;
    // When created, initialize static data and remove trace of any SQL query
    protected void create() {
    super.create();
    // Setup string arrays of codes and values from VO custom properties
    initializeStaticData();
    rows = (departments != null) ? departments.size() : 0;
    // Wipe out all traces of a query for this VO
    getViewDef().setQuery(null);
    getViewDef().setSelectClause(null);
    setQuery(null);
    // Return the estimatedRowCount of the collection
    public long getQueryHitCount(ViewRowSetImpl viewRowSet) {
    return rows;
    // Subclasses override this to initialize their static data
    protected void initializeStaticData() {
    Department d1 = new Department();
    d1.setDeptno(new Number(10));
    d1.setDname("IT");
    Department d2 = new Department();
    d2.setDeptno(new Number(20));
    d2.setDname("HR");
    departments.add(d1);
    departments.add(d2);
    // Store the current fetch position in the user data context
    private void setFetchPos(Object rowset, int pos) {
    if (pos == rows) {
    setFetchCompleteForCollection(rowset, true);
    setUserDataForCollection(rowset, new Integer(pos));
    // Get the current fetch position from the user data context
    private int getFetchPos(Object rowset) {
    return ((Integer)getUserDataForCollection(rowset)).intValue();
    public class StaticDataEmployeesImpl extends ViewObjectImpl {
    int rows = -1;
    private List<Employee> employees = new ArrayList<Employee>();
    protected void executeQueryForCollection(Object rowset, Object[] params,
    int noUserParams) {
    // Initialize our fetch position for the query collection
    setFetchPos(rowset, 0);
    System.out.println("in executeQueryForCollection");
    super.executeQueryForCollection(rowset, params, noUserParams);
    // Help the hasNext() method know if there are more rows to fetch or not
    protected boolean hasNextForCollection(Object rowset) {
    System.out.println("in hasNextForCollection. Rows:" + rows);
    return getFetchPos(rowset) < rows;
    // Create and populate the "next" row in the rowset when needed
    protected ViewRowImpl createRowFromResultSet(Object rowset,ResultSet rs) {
    ViewRowImpl r = createNewRowForCollection(rowset);
    int pos = getFetchPos(rowset);
    System.out.println("in createRowFromResultSet. Pos=" + pos);
    populateAttributeForRow(r, 0, employees.get(pos).getEmpno());
    populateAttributeForRow(r, 1, employees.get(pos).getEname());
    populateAttributeForRow(r, 2, employees.get(pos).getDept());
    setFetchPos(rowset, pos + 1);
    return r;
    // When created, initialize static data and remove trace of any SQL query
    protected void create() {
    super.create();
    // Setup string arrays of codes and values from VO custom properties
    initializeStaticData();
    rows = (employees != null) ? employees.size() : 0;
    System.out.println("in create(). Rows=" + rows);
    // Wipe out all traces of a query for this VO
    getViewDef().setQuery(null);
    getViewDef().setSelectClause(null);
    setQuery(null);
    // Return the estimatedRowCount of the collection
    public long getQueryHitCount(ViewRowSetImpl viewRowSet) {
    return rows;
    // Subclasses override this to initialize their static data
    protected void initializeStaticData() {
    Employee e1 = new Employee();
    e1.setEmpno(new Number(2333));
    e1.setEname("Emp1");
    e1.setDept(new Number(10));
    Employee e2 = new Employee();
    e2.setEmpno(new Number(1199));
    e2.setEname("Emp2");
    e2.setDept(new Number(20));
    Employee e3 = new Employee();
    e3.setEmpno(new Number(3433));
    e3.setEname("Emp3");
    e3.setDept(new Number(10));
    Employee e4 = new Employee();
    e4.setEmpno(new Number(5599));
    e4.setEname("Emp4");
    e4.setDept(new Number(20));
    Employee e5 = new Employee();
    e5.setEmpno(new Number(5676));
    e5.setEname("Emp5");
    e5.setDept(new Number(10));
    Employee e6 = new Employee();
    e6.setEmpno(new Number(7867));
    e6.setEname("Emp6");
    e6.setDept(new Number(20));
    employees.add(e1);
    employees.add(e2);
    employees.add(e3);
    employees.add(e4);
    employees.add(e5);
    employees.add(e6);
    // Store the current fetch position in the user data context
    private void setFetchPos(Object rowset, int pos) {
    if (pos == rows) {
    setFetchCompleteForCollection(rowset, true);
    setUserDataForCollection(rowset, new Integer(pos));
    // Get the current fetch position from the user data context
    private int getFetchPos(Object rowset) {
    return ((Integer)getUserDataForCollection(rowset)).intValue();
    Who can help?
    Thnx in advance!
    Rolf

    Rolf,
    I guess when we try to do it for you, we end up with almost the sample code provided by Steve Muench.
    So there from my point of view it doesn't make sense to do it all over.
    Take some time and study the sample code, run it without changes and after that try some changes which suits your use case better.
    If you don't understand what's going on in the sample post the question here and we try to help you.
    Timo

  • Ince updating my firefox browser whenever i click on an internet link in an email it does not open on firefox although my mac switches to the firefox window as this is my default browser- what to do? Previously this has always worked without a hitch...

    ince updating my firefox browser whenever i click on an internet link in an email it does not open on firefox athough my mac switches to the firefox window as i have this set to be my default browser- what should i do?

    I have the same problem, and I also wondered if Google toolbar has anything to do with it. There GMAIL was set as the default mail application at first. I have removed that setting, but Firefox 4.0.1 continues to use GMAIL instead of Outlook which is my selection for mailto handling.

Maybe you are looking for