Remove vocal from a song. E

Can you remove the vocal content from a song with GarageBand?
Thanks

http://www.bulletsandbones.com/GB/GBFAQ.html#removevocals
*I may receive some form of compensation, financial or otherwise, from my recommendation or link.
Message was edited by: Host, Disclaimer added

Similar Messages

Removing voice from a song?

Does anyone know if you can remove the voice in a song to make it an instrumental??? Thanks

In general, there is a certain way to do that. There are programs that can remove the vocals from the song if the song is in stereo, and the voice is mixed "in the middle" and the rest of the instruments are not. The programs calculate the wave that is common between the two channels and remove it. I do not know if GB can do that, and I am almost certain that it can't.

Removing Vocals from an iTunes track

is there a way to remove the vocals from a song?

There are a few options:
1. Download Audacity (http://audacity.sourceforge.net/), open the song in Audacity, Select All (CMD + A), and select Effect >> Utillity >> Vocal Remover in the menu bar. You can mess with the settings if you know what your doing or just select OK.
Note: this method works decently, but not perfectly depending on the song.
2. Google the name of the song followed by "instrumentals" to see if you find anything.

Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ? o mixdown ,

Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ? What are some other editing allowed on a stereo import (polyphonic mix) Thanks, Sploink.

Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ?
If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
1. Import a Stereo mix into a Logic Stereo track.
2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
3. Hard Pan L/R both stereo tracks.
4. Insert an EQ and Gainer plugins into the duplicated track (R).
5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
6. Open the Gainer plugin and thick the "Phase Invert" Right button.
7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
P.S Click the image below to show its real resolution!
Regards,
A.G
======================================
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
======================================

REMOVE VOCALS FROM TRACKS

DOES LOGIC PRO 8 HAVE A PLUGIN FOR REMOVING VOCALS FROM TRACKS?
Thanks.

Sample if I'm not mistaken that was a tongue in cheek comment, and I got it... so you know it wasn't lost on everyone. As far as the VS880... I'd like to hear the "stunning' results I had one of those way way back and the bottom line is you are taking out frequencies that are panned centre, so ... as pointed out the reverbs and delays are almost never panned centre and won't get removed... but there are a lot of other instruments that suffer from the removal of said frequencies and to my ear ... the results always suck... DNA is just new and even though a revolutionary break-through, I seriously doubt it's anywhere close to that. I mean he did have a break through playing with the math of frequencies but when it comes to trying to separate formants all those other unique elements that distinguish between the sounds of different instruments including voice .. forget it...
At this point DNA won't even separate drums, and for all intents and purposes you could argue that each drum in a kit is pitched differently ... They are sooooo far from separating instruments sharing frequencies not worth mentioning...

Remove music from a song

im working on a 27 inch imac and i was wondering if there was any way that i could remove the music from a song and just keep the vocals.

Updated: 2015-06-30Hello and thanks for the feedback!
A similar idea has also been suggested here:
https://community.spotify.com/t5/Live-Ideas/Your-Music-Make-it-harder-to-remove-music/idi-p/863473
Add your kudos and comments there please! ;)

How Can I remove the vocals from a song i havent made myself.

By that queston, I mean the I maybe wanna remix a song and only need the vocals or the instruments. How can I separate them or only get either one of the without the annoying sounds in addition to the sounds i add.

Yes, actually I have. Recently, The Black Eyed Peas posted a contest on YouTube, about other users making a remix of "I gotta feeling", and I was gonna compete just for fun, and I dont think I would win, so I thought that since I am kinda interested in music and making of it (though I dont know so mutch of it). So this could maybe be good practise.
But thank you
PS. I'll remember that next time

Remove Folder From iTunes Songs

I wish to replace my large database of music on the HDD of my DVD player/recorder and to do this I need to remove the folder from the various albums and songs held in iTunes. Does anyone have an easy answer to this problem that iTunes has created for me?

When I transferred my music collection from Windows Media Player to iTunes it consisted of one folder with thousands of individual files with the track name and composer or singer etc. In this format I was able to upload to my LG DVD player/recorder HDD.
I now wish to add more tracks to my LG machine and have discovered that iTunes has placed each track into a folder and each album into a folder as well. My LG player cannot read the songs because of the folder. It cannot see the tracks to be played.
I am looking for a way to strip the tracks from the folders so that each track can be seen in one long list.
I hope this explanation is clearer.

Is there any way to remove artwork from all songs on iPod?

I need to clear all the artwork from my iPod so I can put them back on, as right now they are all mixed up for some reason. Any way to remove all the artwork? I unchecked the display artwork button under my iPod preferences in iTunes preferences, but even after updating the album artwork is still there...

If you are in Windows, you can try this...
Close iTunes.
Go to the folder that contains your music. Select TOOLS then FOLDER OPTIONS from the menu at the top. Pick the VIEW tab. Change the appropriate opttion to "SHOW HIDDEN FILES". Click apply and close...
Now scroll down through your music and you should see files named "Album Art.....". Drag all of them to the trash or some other folder. If you are not sure about all this, just don't empty the trash.
When you run iTunes again, it should not be able to find the artwork. I'm not sure what you would do next but this gives you a start!
Proceed at your own risk. Good luck!

How can i remove videos from my song list?

and put them away in a folder but not in my songs?
Basically what i want is Songs go to songs and vids to vids

Currently it cannot be done.

Removing someone from purchased-songs-list

A friend of mine had me listed as someone who could share her purchased music. When I fixed my computer and reopened iTunes, it didn't recognize my computer, and won't let me listen to her songs. How can I get them back?
Thanks.

Hi, overbay.
You can create create a smart playlist that will Match the following rule: Kind is Protected AAC Audio file.
That should do the trick.

How to remove vocals

Can someone tell me how to remove vocal from a song in Garageband?
Thanks

Satya1 wrote:
Can someone tell me how to remove vocal from a song in Garageband?
http://www.bulletsandbones.com/GB/GBFAQ.html#removevocals
(Let the page FULLY load. The link to your answer is at the top of your screen)

How can I extract vocals from a track to use as an acapella?

Hi, just as the title suggests I would like to know how to extract vocals from a song so I can then use it as an acapella using Audition CS5?
Also whilst I'm here, again using audition CS5, how can I determine the bpm of whatever sound file I have open, and furthermore how can I then match the bpm from another sound file to match the bpm of the track I'm working on?
Thanks for your time
Dan

Your success with isolating vocals from a song depends almost entirely on how the song was mixed, and will vary greatly. There is no perfect solution, though many times the artifacts that remain can be minimized within a mix. Generally, you'll have the best success with music where the vocals are panned to a specific location in the mix - usually dead center, but the tool can be used to isolate any position in the stereo field - without too much instrumentation spreading into this area. Bass sounds are usually mixed center as well, so you may need to to some additional EQ or Spectral removal of low frequencies after you complete the extraction step.
The tool you'll want to use in Audition is the Center Channel Extractor effect, located under the Effects > Stereo Imagery menu. Start with the Acapella preset, then change the Extract parameter to Custom for some additional control. Select the region you wish to isolate (it's often better to isolate passages separately as, for example, verses can be mixed very differently from a chorus) and begin playback with the effect open. Use the Power button to temporarily bypass the effect so you can note the differences.
Adjust the Phase Angle and Pan parameters to maximize the vocals while minimizing the instrumentation. Use the Frequency Range parameters to help reduce some of the low-end and high-end mix that is not associated with the vocals. The two vertical controls on the right allow you to adjust the levels of what's being isolated vs. everything else. (Flip-Flop these to make a Karaoke mix.) Under the Discrimination tab, the most important parameters will be the Crossover Bleed and Phase Discrimination controls. You can adjust the FFT parameters under the Advanced tab, though I wouldn't recommend it until you're comfortable with the tool. You don't necessarily need to know exactly what ever parameter does, but listen closely while you make adjustments and you'll begin to understand how each parameter affects the result.

Removing vocals with wavepad

Hello everyone!
I had downloaded Wavepad to remove vocals from songs, I had already removed vocals once but I forgot how to do it again WITHOUT USING "EFFECTS>SPECIAL EFFECTS>REDUCE VOCALS".
I remember I learnt from a video on YouTube but I do not find that tutorial video again!
Please help me or teach me again how to remove vocals from songs with Wavepad, or with any other FREE application, NOT AUDACITY (it never worked for me!!) :'(
Merci beaucoup !

Thank you very much for that link ****!
In case that anyone have any idea how to remove vocals from songs using Wavepad (without using "effects>special effect>reduce vocals", or remove vocals using something else (NOT AUDACITY)
Please let me know...
Cheers

Logic express 8 - removing vocals

Hi
Does anyone know how to remove vocals from audio tracks like making kareoke versions of existing tracks?

Hi,
you could try VoxReducer. See http://primo-media.com/?page_Request=Products
But dont expect miracles! It's principally impossible to remove the vocal without damaging the rest of the song.
Regards,
Jaap

Remove vocal from a song. E

Similar Messages

Maybe you are looking for