Remove white border of Dock windows/replace graphics

Hi, thanks for your time. As you can see on this image, I successfully replaced the Dock background images in Macintosh HD > System > Library > CoreServices > Dock with my own simplified graphics and reloaded the Dock with Terminal: killal Dock.
I would like to now replace the image files that create the white border in the Menu windows of the Dock. (How) can I do this? I already created the replacement files, seen listed in the screenshot.

Is it even possible to do this? I replaced the image files but it still looks the same. Is there a similar killall command for the Terminal to do this as with the Dock background?

Similar Messages

Remove white border around TOC

Hello all, I have set a black background to the HTML page, playback controls and TOC. Yet Captivate draws a white border line 1px wide around the TOC. Is there any way to remove this?

Hi Robert,
I can understand how it feels when something is translated entirely different than what the feature is supposed to do.
This says it....
"For example the new function that moves the recording area following the mouse movement has been translated into a term that describes the balancing of stereo sound."
You can raise this issue, so that the Localisation team can take this up.
Click to report this issue
-Ashwin

Removing white border when publishing in web

Hi
There seems to be a default white border around the web
published version of my CAL metarial. See below
http://www.lshtm.ac.uk/dl/programme/sample/whitegap.gif
How do I remove it so the CAL material is flush against the
corner edge of the web browser
Thanks in advance
Jon

Set the margin and padding on the body tag of the html page
to 0. You can
do this directly in the tag or with CSS.
HTH;
Amy
"webacity" <[email protected]> wrote in
message
news:et3gfp$hgv$[email protected]..
> Hi
>
> There seems to be a default white border around the web
published version
> of
> my CAL metarial. See below
>
>
http://www.lshtm.ac.uk/dl/programme/sample/whitegap.gif
>
> How do I remove it so the CAL material is flush against
the corner edge of
> the
> web browser
>
> Thanks in advance
>
> Jon
>

Removing white border around applet in browser?

Greetings All,
My applets are surrounded by a white border in Netscape and IE. Can I get rid of it so that the applet goes from edge to edge in the browser control? (Looks like default 5 pixel Hgap is in force, is this the case, and if so can it be overridden without access to the source code?)
TIA,
Dave.

Hi, Even when you assign 100% to width and height you will notice one black border around applet in case of IE5.0 When I go in to full srceen mode in IE 5.0 It should not show me scrollbars.
But because of this border scrollbar remains

Removing White Border

Hey, I'm new to Elements 10 and am experiencing my first real problem. I have a fun printer that allows me to print photos onto photo paper and I was experimenting with a couple photos. My problem: They are printing with an annoying white border and I cannot figure out how to get rid of it. If anyone could please shed some light onto this matter, I would greatly appreciate it. Thanks.

To add to Mark's post, not all printers will print borderless, so check the documentation. If your printer is ok for borderless, follow these steps:
Go to File>print in Editor. I never print from the Organizer.
In the dialog that comes up, go to #2 Printer Settings
Click on change settings, then advanced settings
Tick the box for Borderless
Under #3 for Paper type, be sure to select the borderless option for your size paper stock
Crop the picture to the dimensions of the paper stock before you send it to the printer.
This same issue came up yesterday and was resolved by implementing these measures.

Print to File: Removing white border

I have a lot of issues going on here. I'm sure that a lot of my problems are a result of my lack of understanding of file size and print resolution. I'm a newbie to printing with Lightroom, and, to be frank, a newbie to printing in general because I've never understood the terminology and technical aspects. (Reading articles about dpi, ppi, image size, and resolution is a VERY difficult undertaking. There is conflicting information, and it's hard to find someone who can explain it in easy to understand terms.)
I print at Costco, and I use their printer settings. As far as I can tell, the only way to embed the printer profile in an image is to print to file. What I would prefer is to save my image as a .jpg and upload it to Costco.
When I set up a photo for print to file, Lightroom places a white border around it because it's trying to arrange my photo on the printer paper. Even when I change the Print Job to print to .jpg, it does this. The only way to get around this is to check "custom file dimension" under print job, and then select a size. Then, under layout, I'm able to set the margins to zero and the cell sizes to the dimensions of the photo I'm going to print.
I notice that when I use a custom file dimenstion, the size of the image changes. If I choose 8 x 10, it chooses a file size about the same as the original image (8mb). If I'm printing a poster, 20 x 30, it creates a huge 27mb file. At first, I thought I could just use ratios, such as 2 x 3, but it seems like that would shrink the photo down to such a small extent that it would be pixelly.
And how is all this affected by resolution? If I choose 300 ppi how is that affected by whether an image is printed 5 x 7, 8 x 10, or 20 x 30.
Before using lighroom, I simply croppoed a photo, added the printer profile, saved it, and uploaded it. I do not understand why Lightroom is making me choose the paper size.

[email protected] wrote:
I have a lot of issues going on here. I'm sure that a lot of my problems are a result of my lack of understanding of file size and print resolution. I'm a newbie to printing with Lightroom, and, to be frank, a newbie to printing in general because I've never understood the terminology and technical aspects. (Reading articles about dpi, ppi, image size, and resolution is a VERY difficult undertaking. There is conflicting information, and it's hard to find someone who can explain it in easy to understand terms.)
I print at Costco, and I use their printer settings. As far as I can tell, the only way to embed the printer profile in an image is to print to file. What I would prefer is to save my image as a .jpg and upload it to Costco.
When I set up a photo for print to file, Lightroom places a white border around it because it's trying to arrange my photo on the printer paper. Even when I change the Print Job to print to .jpg, it does this. The only way to get around this is to check "custom file dimension" under print job, and then select a size. Then, under layout, I'm able to set the margins to zero and the cell sizes to the dimensions of the photo I'm going to print.
I notice that when I use a custom file dimenstion, the size of the image changes. If I choose 8 x 10, it chooses a file size about the same as the original image (8mb). If I'm printing a poster, 20 x 30, it creates a huge 27mb file. At first, I thought I could just use ratios, such as 2 x 3, but it seems like that would shrink the photo down to such a small extent that it would be pixelly.
And how is all this affected by resolution? If I choose 300 ppi how is that affected by whether an image is printed 5 x 7, 8 x 10, or 20 x 30.
Before using lighroom, I simply croppoed a photo, added the printer profile, saved it, and uploaded it. I do not understand why Lightroom is making me choose the paper size.
How you are getting rid of the border is pretty much the way to do it -- you can save this layout as a preset for next time. However, as far as printing to JPEG for printing at a service, I just use the regular export dialogue. Unless you are printing 8x10s with some custom layout of multiple files (e.g., you could print a number of little wallet-size photos, and then cut them out yourself) and don't need the features the print module gives you, this is just easier. But exporting a JPEG from the regular export makes borderless print-ready images if you select the right options.
DPI/PPI can be a confusing subject, but there are tools on the internet that allow you to calculate the number of pixels you need to clearly print at certain sizes. Honestly, for most of us not doing fine prints (and given you are sending these to Costco, I'm assuming this is not the case) just do 240 or 300 for 4x6s and 5x7s, increase this to 600 for 8x10 and similar sizes, and go to 1200 or 2400 when you step up to the really large sizes. Remember, the larger the print, the further back you stand to get the whole thing, so at some point resolution becomes less important.
You can probably export at less than 100% quality and get very good results. There is an article out there that discusses JPEG quality and file size in Lr, which is different than Photoshop. The upshot is that you get very good results at around the 85-90% range. This, of course, depends on the information in the image. You also want to strip most of the metadata from the file. This can account for a large amount of room in the file.
Find out if your service expects sRGB or can accept AdobeRGB (surprisingly, a lot of photo kiosk prefer AdobeRGB) and then you can get your colours closer to what you expect.
Ideally, you want to export at the size you expect to print at. Lr will optimize the sharpening and so on based on the target file dimensions along with the resolution, and you will just get better, sharper results. You will want to crop to the right ratios, too, so that the target dimension makes sense. Lr will never try to distort your image to fit certain dimensions, so some creative sampling will occur, otherwise.
Lr is actually one of the easiest apps I've ever used for getting images print-ready. Between the sharpening, the white and black points (because blow-outs in print look terrible) and so on, it is easy to get pretty good results as amateur. You do have to decide the dimensions and resolution, though, in order for Lr to make the right choices when rendering the final JPEG.

Can't remove white border/line on left & top of Swiftweasel [Solved]

As the title states; I cannot remove this persistent white line/border thing at the top and left side of my Swiftweasel (Firefox) web browser. I know there must've been a post about this before but with such familiar/vague keyword combinations such as "white line border swiftweasel / firefox", etc, I couldn't find anything in the Forum or on Google except something to do with certain webpages (which in my case is on ALL pages). Here's a screenshot of what I'm talking about:
(Swiftweasel is at the top of the screen, in case you couldn't tell. See the white line/border at top/left?)
I disabled all my extensions and Stylish styles and the white line/border on top & left side are still there. This was an issue on my previous Arch installation as well (not that it has anything to do with Arch itself) but I'm just saying that it's been an issue before for me. Any ideas? It's just very annoying.
EDIT: Solved: read my last post.
Last edited by milomouse (2009-09-21 21:24:10)

Thanks for the response. As far as renaming ~/.mozilla, it kept regenerating itself each time I opened Swiftweasel, so I moved ~/.sw35 to ~/.sw000 and then opened it and there was no white line. So I went through one by one installing my add-ons again and, even though I had disabled it and restarted earlier, it turns out that if I don't install "NumExt" it wont have the white line. That's so weird that it didn't do it earlier when I disabled it. Sad, though, since I really liked that extensions. Maybe I'll see if I can edit the file somehow.

How to remove white question marks on Windows desktop icons?

For a few weeks now, most of my desktop icons (Windows system) have been covered with a white question mark within a blue circle. It's more of a nuisance than a severe problem. Today I noticed that the HP Support Assistant on my desktop is the one and same white question mark within a blue circle. So finally I hoope I have found the cause. But now what is required to remove these marks?

What is the exact model # or product #?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

[solved] White border around urxvt (Openbox / Dyne)

Hi, dear community.
I'm using Openbox and urxvt as console terminal. Everything is fine but white border around urxvt window is really annoying.
Screenshot:
Notice, there are no white border around another application window.
.Xdefaults:
! c o l o r - s e t t i n g s
*background: #222222
*foreground: #EEEEEE
! Default
! 0: black
*color0: #222222
*color8: #222222
! 1: red
*color1: #9f6767
*color9: #9f6767
! 2: green
*color2: #92ac68
*color10: #92ac68
! 3: yellow
*color3: #d0d293
*color11: #d0d293
! 4: blue
*color4: #9aacc3
*color12: #9aacc3
! 5: magenta
*color5: #bb77a4
*color13: #bb77a4
! 6: cyan
*color6: #77bbb5
*color14: #77bbb5
! 7: white
*color7: #777777
*color15: #777777
! u r x v t
urxvt*geometry: 130x45
!URxvt*font: xft:terminus:size=8
urxvt*saveLines:32767
urxvt*internalBorder: 0
urxvt*externalBorder: 0
urxvt*scrollBar: false
urxvt*scrollColor: #EEEEEE
urxvt*scrollBar_right: true
urxvt*scrollColor: #000000
urxvt*externalBorder: 0
urxvt*internalBorder: 0
urxvt*borderless: 1
urxvt*perl-lib: /usr/lib/urxvt/perl
urxvt.perl-ext-common: default,tabbed,matcher
urxvt*urlLauncher: firefox
urxvt*matcher.button: 1
As you can see - no white color usage, and options that probably turning border off are on.
Can someone help with it, or suggest where to search for solution?
Last edited by kvictor (2009-10-22 07:39:15)

skottish, thank you so much! At least I found where to search thing to fix.
There was one problem with you solution - if you change window.client.padding lines to the zero, you will lost ability to resize terminal window. The best fix is to change this lines:
window.active.client.color: #XXXXXX
window.active.client.color: #XXXXXX
and set #000000 or what would you like.
Anyway, thanks again, you gave me a key to solution!

Removing a white border around the Extension I'm building

Hi,
I have a CS Extension that I'm building, and while working on the UI I have noticed that there is a white line all around the extension, which I cannot get rid of. I've attached a screenshot showing an example of this white border.
See under the PUBLISH button is this white border. I have set the height and width in the Application tag of my app to 100%, but this does not remove the border. Does anyone know what the problem could be and how to get rid of it?
Stephen

Yes. There's a couple of pixels arounf the swf that you can't do much about.
Make the background color of your extension match the color of the panel, and noone will notice...
Harbs

Black window with white border and cursor location - how do I get rid of it?

I must have inadvertently hit some key or combo of keys and now I have an oblong black window with white border that is annoyingly telling me what the cursor is over and where I can go/ what I can do from there.
How did I manage to turn this on and more important, how can I turn it off?
Thanks.

oops, never mind, found it - VoiceOver .... solved

My new iMac with Yosemite displays photo icons with a white border. How can I remove this border?

How can I remove the white border/'frame' around the photo icons, which I store in folders other than iPhoto?
My computer is an iMac 27" (Late 2014 5K Retina display) with Yosemite 10.10.3.
The border does not exist on any photos /images created on my MacbookPro (Lion) or any earlier computers. It appears after importing to the iMac and only then after saving in either Preview or Photoshop Elements.
I have looked in all "Preferences" but could not find how to remove the border.
Any advice will be gratefully received.

Thank you for the reply. I wanted to wait awhile in order to ensure that this corrected the issue. For a brief while, it did! However, it did not take long before the screen began once again hijacking my home button presses. This occurs even with Firefox removed from default applications ( triple-checked ).
This never happened before version 35.

Replacing Graphics w/ White Boxes For Printing?

Hey!
Is it possible to replace graphics/images with white boxes when exporting/printing? Using the "Omit for OPI" option produces black boxes - even worse for saving ink!
Thanks and Merry Christmas!
Lars

You can use the Attributes panel to make individual items non-printing or you can put them all one one non-printing layer. When you print proofs or make proof PDFs for the client you can include non-pri ting objects. Turn that option off for the final output/PDF.

Thin white border around graphic

I created a rectangular black box in photoshop and brought it into FCP as a PNG. When I lie it down to the timeline, a thin white border is created around it. I want it to be a clean edge of just black. Can someone please tell me why this is happening...
thanks

Most Photoshp people assume ink is being placed on a white paper background. In video, everything is transparent or over black. How you saved yoru image in PS will affect how it gets presented in FCP because of this inability of most PS wonks to understand video.
If you build your PS stuff on black, the pixels around the edges will not be white.
But this begs the bigger question, why would you build a black box in PS when you can do simple stuff like that directly in FCP or otion?
bogiesan

Cannot edit keywords - white border on box

I have an issue which emerges intermittently & I do not know what causes it or how to escape it once it has occurred....
The keyword box for an image suddenly shows a white border and its contents cannot be edited. Keywords can only be added through the input box below the main box, keywords cannot be removed once input and cannot be edited.
If anyone can explain what brings this on and how to escape it then I would be very grateful.
Thanks
Scott

I just created the white border. Quitting and coming back into Lightroom cleared the issue.
Prior to me noticing the border I did a lot of events that may or may not be associated.
I searched for "Christopher", added photos to a quick collection, selected all of them and exported photos from Lightroom as email size and full resolution. Used Photoshop to convert some Microsoft Paint images to PDF then used Lightroom to Synch the folder and import 2 Photoshop documents which I keyworded. Of course, the customer wanted more screen shots captured and converted so I did the convert to Photoshop and synch/import to Lightroom. I pulled the MS .BMP files directly into Photoshop from Explorer without going through Lightroom. The Photoshop documents were discovered and imported.
The immediate actions just prior to the problem.
Photoshop was open with no open documents. I started key wording raw files that had minimal previews. I completed a series of about 10 photos with the keywording menu (right side menus) open. The photos were in loupe view. Just prior to noticing the white box I had zoomed into a photo to identify a person. I started typed his name "parker" which contains a lot of Lightroom hot keys. I noticed the white box after the computer returned to normal and I was back to the keywording screen.
My crappy computer may be to blame
It is fairly slow (looking to replace it). Sony Vaio VGN-CR410E, Intel Core2 Duo T5550 @ 1.83Ghz (2 core processor), 3GB RAM, Windows Vista 64. Photos on an external HDD (USB 2.0), previews and catalog on local drive.
Lightroom
Lightroom version 3.4.1 [729592] Built-in memory and Real Memory available to Lightroom 3061.6MB. Real memory used by Lightroom 464.5 (variable). Application, Library Path, and Settings folder are all on C: drive in default locations.
Hopefully that helps someone figure out the cause. I don't do a lot of software testing but it is in my past.

Remove white border of Dock windows/replace graphics

Similar Messages

Maybe you are looking for