Remove zeros from right side

Hi all,
I want to remove zeros from right side.
like : if value is '0.055500000000E+04'.
then the output should be '0.0555'.
How can i get such output.
Plz help me....

Hi,
the problem here is u are dealing with a datatype of format F (i.e floating point ) and the output u desire is in packed format .
You cannot delete the zeros of such data typesas type F instead u can move them to the packed datatype and get the result.
do one thing declare a variable of type p and move the value of type f which u have right now to the variable u have declared as type p.
data : v_val type p decimals 4.
v_val = " <------ assign the type f to type p over here .
hope this helps .
regards,
vijay.

Similar Messages

Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation appearing rightside height is more than the left side. In reverse manner from the left side.

Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation bar appearing rightside height is more than the left side. In reverse manner from the left side. I dnt know whether it is default feature of iphone or not but i am really disappointed due to this. So please anyone help me in this issue and let me clear my doubt and make me happy. Thanks in advance.

I believe what you are seeing is an optical illusion when viewing the screen from the side. Try to align one of the one of the options in Settings, like General, with the navigation bar you'll see it does the same thing.
Hope that helps

Move dynpro field text from right side on yhe left.

Hi experts. I have a DDic field (char1 as chebox) on screen. I need to move the DDic text for this field from right side to the left side of the checkbox. How can I do it? Is it neccesary to split this one object into two? To create a new text field and handle it in program?
Thanks for your answer.

hi Mark,
in the Graphical Screen Painter you have to right click on the field and you'll have some helpful options...
ec

Removing zeros from data stream

Hi
I have incoming data (plz see attached diagram which shows the 2 states of the for loop '0' and default) which is a 1-D array of 64 bit real data .....it goes through the loop which removes zeros from the array.
As I have 3 elements in the 1-D array (call them x,y,z ), the loop works very well for all values of 'y' and 'z' .
However when x gets towards 1 and below say 10e-3 (it never is a negative number), the loop is rounding everything to 1 and then when the value gets between 1 and 0 (10e-3 for example) the loop leaves it out altogether and I just get y,z values saved.
Plz help me sort this out .
Cheers
Baz
Attachments:
zeros.PNG ‏25 KB
zeros.PNG ‏25 KB

If you want a tolerance comparison, try the attached VI. I rewrote it from one in vi.lib after an earlier post.
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
CheckForEquality(DBL).vi ‏23 KB

Unable to change Axis y location from right side to left

Hi All,
I am working with OBIEE 11.1.1.1.7.
I am tring to change the location of AXIS Y (in chart) from right side to left.
please help :-)

Hi Tyson,
I did exactly what you have mentioned and it worked fine.
But when I am putting the same thing in my custom.css file as mentioned below, IT's NOT WORKING.
uploaded custom.css at
Application XXX>Shared Components>Cascading Style Sheets
custom.css
.TabHolder,.TabHolderC {text-align:left;}calling custom.css in the Page Template (one level tab)
<head>
<title>#TITLE#</title>
<link rel="stylesheet" href="#IMAGE_PREFIX#themes/theme_16/theme_3_1.css" type="text/css" />


<link rel="stylesheet" href="#WORKSPACE_IMAGES#custom.css" type="text/css"/>
#HEAD#
</head>Any idea why it is not picking up???...
Thanks,
Deepak

How to eliminate or remove zeros from 1D array

How to eliminate or remove zeros from 1D array. Let say I have 1D array having foolowing elements
"0 0 0 0 0 4 0 0 9 0 0 1 4 0 0 0 0 0 0 0 0 10 9 0 0"
So after removing or eliminating zeros it will become as follow
"4 9 1 4 10 9"
So can any body guide me how can I do that? See attached Image for details.
Thanks
JK

altenbach a écrit :
hchiam wrote:
Here are 2 example .vi's I made based on altenbach's removeZeroes.png in this discussion thread:
It seems pretty pointless to post those because no new useful information is given.
Currently, only the input is defined in the connector pane, making them useless as subVIs.
unlike my example using integers, an "=0", like any "equal" comparison, is potentially dangerous with DBLs.
Reshaping a 2D array to 1D before removing zeroes is pretty pointless because a 2D output cannot be recovered. A more interesting scenario would be to remove some columns or rows (e.g. that are all zeroes) from a 2D array.
You should also clean up the front panel, e.g. properly zero the upper left corner, make the controls/indicators nicely labeled, sized and arranged, and maybe even add scrollbars to the arrays.
Thank you for those comments.
Now the input and output are defined (in the updated attachments) for use as example subVI's. I also cleaned up a few visual details, but I leave the rest for others to cater to their specific uses if they don't want to use this as a subVI (or at least as-is), such as changing the icons or changing to integers instead of doubles.
I'm not sure about what you mean exactly with "=0" being "potentially dangerous with DBLs". I'm guessing you had a certain case scenario in mind. Although the subVI's seem to work fine within my larger program and situation, my situation may not generalize with regards to this point.
I reshaped from 2D to 1D, with a 1D output, because it could be helpful for things like when later processing just needs a 1D array. For example, in my situation I had to remove a huge spike of unnecessary "0"'s from a previous subVI that were affecting the output display of a certain histogram. So it turned out a 1D array output was helpful, and you never know what problems come up, so I included the 2nd example.
Hopefully if someone is looking for this, they can just use or play with an example subVI (granted that they know how to plug things in for their context). I was hoping to post a subVI people could put to direct use.

Two noise from right side when open the mbp

Every time when I open the laptop, there are two sound like zi zi from right side of it, before the opening music, it sounds like reading the disc, is there something wrong with the computer?

No. The OS, when the MBP is started does a diagnostics check, testing the optical drive as a part of same. That is the sound and it is normal.
Ciao.

Removing border / browser fill from right side of screen

I'm currently creating my very first website with Adobe Muse, the parallax scrolling effects work perfectly but i'm having the following issue:
When i'm previewing my website in the browser i can scroll to the right side and there is a 5cm/10cm grey border, i would like to get rid of it. "Horizontal scrolling must be disabled".
I think it has something to do with the rectangles/frames (1920x1080) i'm using for the images, but that is just speculation.
Any help would be greatly appreciated : )
Here are some screenshots:
Full website:
The Grey Border/Area:
My Page Properties:

Welcome to the forum!
I don't believe that there's a cheap fix for an expensive machine such as T43p. Do you have any warranty left?
Have you run PC-Doctor on all video aspects of the system?
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Remove icons from right end of menu bar

On the Apple site I saw this procedure to remove icons from the right end of the menu bar : To rearrange the menu bar icons on the right end of the menu bar, hold down the Command key while dragging the icons. To remove them, hold down the Command key and drag them out of the menu bar.
It does not work with 10.6.8. As soon as I approach an icon it opens a menu wether I use the right or left hand side of the mouse. I cannot simply drag, as suggested.
Any other suggestion?
Thank you in advance

Some can't be moved or removed.
Check their respective System Preference, perhaps there is a option there to remove it from the menu bar.

Has any one seen a very slim blue line suddenly apear vertically on monitor, about 5" from right side of laptop screen?

I very thin blue line has suddenly appeared vertically on the right side of screen, about 5 or 6" from the edge. It's going right through everything including the upper menu. What is going on here? Anyone have ideas? I was just looking at some email at the time. I restarted computer, but the line reappeared.

Hello,
Mine had a vertical line running through the center of the display. Didn't look too bad until another line appear some time after.
I replaced the display myself, but didn't bother with taking the actual display panel from the housing.
It's lot more easier to replace the screen with the housing intact. I got one that was working from eBay for £50 ($76) It was a simple case of removing the top cover (keyboard), unpuagging the monitor cables (Airport cables) and unscrewing the display. Lift away the old one and replace with the replacement one.
Display removal instructions can be found here:
http://www.ifixit.com/Guide/Installing+PowerBook+G4+Aluminum+17-Inch+1-1.67+GHz+ Display/258/1
With the right tools and careful attention, your PowerBook G4 display can be easily fixed for less than $100 (£60)
Since then I've had no further problem with my PowerBook.
Hope this helps.

Updating table from right side of shuttle

I have a situation where I have a many to many relationship with 2 tables and an intermediate table. I am trying to create a shuttle item to be able to bring the two tables together. I have been reading the posts regarding populating the right side of the shuttle. That works now, but I have no idea how to take that and update the intermediate table with the values from the right side of the shuttle.
I tried using APEX_APPLICATION.G_F02, but that only seems to work, if the values in the right side are highlighted.
I can't seem to figure out what the name of the right hand of the shuttle is.
Any help would be very welcome.
Thanks, Greg

Greg,
Are you processing on submit? If so then the values would be avaialble by simply referencing the item. Each return value would be separated by a colon as in:
1:2:3
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
You can reward this reply by marking it as either Helpful or Correct ;-)

Subtle knocking sound coming from right side of MacBook

Since a few weeks my MacBook makes a very subtle but hearable knocking noise coming in irregular intervals from the right side (I put my ear on the MacBopk and waited). Coincidentally I did two things around the time the noise started: I bought a new hard drive (Western Digital Scorpio, 2.5", 8MB Cache, 250GB) and installed Leopard. Since the sound definitely comes from the right side it can't be hard drive related. According to Disk Utility the hard drive seems to be okay too.
Since the only component with moving parts is the optical drive I suspect that this might be the source of the noise. The problem is, that it's not reproducable and only occours irregularly. Plus every disk I insert plays fine (there was one incident with a DVD of "Lost" which went to pause every minute or so without pressing any button though).
Any suggestions? Thanks!

Thanks for your answer, impulse_telecom. Unfortunately I really can't tell these operations apart (especially since this noise comes and goes without any special action ...) so I don't really know what the drive is doing when it's making the noise. The (relatively) good news is that it's been making this noise for about a month now and I haven't noticed any data loss or read/write errors. But it could also be that since my hard drive is 250GB it might take a while for these errors to pop up. Since Leopard my boot caches had to be updated twice (never saw that under Tiger) when rebooting and I don't really know if that's a good thing and/or related to this.
I'll try and record the noise today and post it.
(I wanted to mark your comment as helpful too but there seems to be a limit per thread/day ... sorry).

Tactic 3D Sigma - No audio from right side using USB?

Just got my new Creative Sound Blaster Tactic 3D Sigma (phew, that's a mouthful) headset in the mail today. When I connect it to my laptop using the USB adapter, there is no audio from the right side, only the left. When I connect using analog, though, the headset works fine.
I'm on Windows 7 Professional 64-bit, and I have the latest Creative software and headset drivers installed.

Hmmm... sounds like something is wrong with the USB adapter. Did you purchase the headset direct through Creative Online Store or from your local electronics store? If you bought the headset from your local electronics store, please get in touch with them right away, these stores usually have a 30 day exchange policy.
If you purchased this through the Creative Online Store, please write to our Customer Support and ask for an RMA (Return Merchandise Authorization).

3 beeps from right side of HP dv7-6178

I am hearing three beeps periodically coming from the right side of the
HPdv7-6178
Is this an alarm?
Does this have a meaning?
The AC is hooked up permanently.
This computer is about one month old.
It has Win 7.
This question was solved.
View Solution.

I would recommend looking at this document and checking out the beep code section:http://goo.gl/1WnH0
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Only hearing from right side on my head set

I can only hear from the right side on my head set. I have tried several different headsets and songs get the same result. Help???

You have a broken headphone jack, you will need to get it replaced or replace it yourself.

Remove zeros from right side

Similar Messages

Maybe you are looking for