Removed all changes in Java source after installing Release 2 Update 1 Hot

I happened the same problem twice after installing Release 2 Update 1 Hot Fixes:
Operations as followed:
1. Open the project
2. Modify some source code of the backing bean and then save the modifications.
3. Click the design tab to display the UI of this page and click on a button.
4. Click the property 'action' of this button in the property tab.
5. The dialog shows and I choose 'Unset property'.
6. Go back to its backing bean and guess what...
7. All the changes I made in step 1 are all gone. The source code of the backing bean goes back to the status right after I opened Creator2.
I discussed the problem with my colleagues and they have similar situations after installing Release 2 Update 1 Hot Fixes. They may do some other things in the UI Design page and when back to the backing bean, the changes to the backing bean since Creator 2 is opened are all gone and the source code of the backing bean goes back to the status right after Creator2 is opened.

This has been covered....
http://swforum.sun.com/jive/thread.jspa?threadID=105962&tstart=60
:-)

Similar Messages

All application slow to molasse after Installing Security-Update 2010_007

After installing security update, ALL applications, all commands in X11 had response times ALL key strokes of the order of seconds to minutes with >93% of system CPU idle. Console displays the message below ever 60-70 seconds.
11/11/10 4:25:36 PM updatedyld_sharedcache[12] for arch=i386 failed: read failure copying dylib errno=5 for /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib while copying /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib to shared cache
The solution is a modification of this link
http://www.macosxhints.ch/forums/showthread.php?t=15517
Basically, the offending file /System/.../LibLAPACK.dylib is moved from the system directory to a current directory, e.g.,
sudo mv /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib .
and then back to the original directory, e.g.,
sudo mv libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
Problem solved without reboot as system immediately returns to normal. Why would a security update from Apple cause this?

Andreas, do you have this info in english? I'm having a similar problem, and I want to see if I can solve it; or could you tell me what you did to solve it?
Here's the message I'm getting every minute from the console:
updatedyld_sharedcache[1461] for arch=i386 failed: read failure copying dylib errno=5 for /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics while copying /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics to shared cache

How to remove all changes made to an image in Camera Raw -

In CS4 with latest ver. of Camera Raw, I think there is a way to remove all changes previously made to an image while using Camera Raw.
In other words after doing this the little icon in the upper right hand corner of an image in Bridge that indicates changes have been applied to an image, should be gone. Another way of asking this would be to say, how can I start all over again with the original image in Camera Raw by removing all changes prefiously made to it in Camera Raw?
TIA

Sorry, I don't know the answer to that for sure*. As a certified old geezer who avoids cluttering his mind with stuff that can easily be looked up in a menu, I stay away from keyboard shortcuts as much as I can, using only those applicable system wide, the most obvious ones in Photoshop like deselect, etc.
* However, since no such shortcut appears next to the menu command, I doubt there is one.
You could create an action and assign it a key command, though. Doh!
Never mind. That was a total brain short circuit. You can't create actions in Bridge. You'll need a script. Ask in the Bridge Scripting forum.
Message was edited by: Ramón G Castañeda

How to change the Data sources after deploying the application ??

Hi All,
i want to know how to change the Data sources after deploying the application to the application server ???
I'm using Oracle Application Server 10g Release 3 (10.1.3.1.0)

Can you access the Enrprise Manager website of the target Application Server from your location? If so, you can change the datasource in it. If not, yo can bundle the datasource definition in your archive and use that one instead of the one configured in the target OC4J container. Or this will just be the responsability of your customer: whenever you send a new WAR file, they have to modify the datasource if needed and deploy the application?

I'm on Vacation with no access to my Mac. But had tried Sync. My software update is iOS 6.0.1. I've tried another WiFi network. I read your comment of deleting Apps for stuck update. So removed all Apps! Can't even install Free Apps. Now using my Kindle

I'm on Vacation with no access to my Mac. But had tried Sync. My software update is iOS 6.0.1. I've tried another WiFi network. I read your comment of deleting Apps for stuck update. So removed all Apps! Can't even install Free Apps. Now using my Kindle

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

All music links are lost after installing windows 7!!! HELP!!!

All music links are lost after installing windows 7!!! HELP!!!
I upgraded my system to windows 7 ultimate from Vista and installed itunes 64px. but when I copy the old itunes folder into D://music and opened itunes, all my music cannot be played. each link shows the mp3 location as: file://localhost/D://music/itunes... ... I ve tried deleting library file and copy/past the original one again. doesn't work. what should I do now. It's 106 GB songs. I cannot locate them one by one nor lose all my ratings and play counts.
please help me!!!!!!!! >_<

Was that Win 7 update from Lenovo, or Microsoft? If Lenovo, it should have installed those missing features. If it was from Microsoft, you have to manually install the Lenovo drivers and software.
The easiest way to do that is to first install ThinkVantage System Update and run it. It should download and install the other drivers and apps. I'm running Win 7 pro 64 on my T400 - a MS upgrade clean install, then TVSU installed the Lenovo stuff. Everything works.
Use the "SUPPORT" button at the top of this page, then "Download drivers and software" enter T400, install TVSU and you should be off to the races.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Best way to remove all changes

What is the best way to remove all changes that were done to an image in Camera Raw, to get the image back to the way it was originally?

Thanks for the suggestion. That would probably work if the file was still open in Camera Raw. But when the file has been opened in Camera Raw, changes are made, then click Done and the image is closed -- the next time it is opened in Camera Raw, Alt/Option clicking the Reset button does not return the image to it's original condition.

Printing problems after installing Security Update 2015-002

After installing Security Update 2015-002 on three separate computers on two different WiFi networks, printers on the network are losing their connections to the computers that can print to them. We have experienced this on a network running a Canon printer and an HP printer - both have disappeared on the network although the printer suggests it is still connected to the network. The same thing has happened on a separate network I manage with a single HP printer on that network. I have tried removing the printers, resetting the printers etc. Nothing is working. I can get one print out of a printer when I turn the printer off and then on. Three minutes later the printer is no longer connected to the computer - although still connected to the network. Please Help.

I think I have figured out that it is in fact the Apple Extreme Base Station that is losing the printer. It is very odd because the printer is connected to the Wifi. My computer is connected to the WiFi and connecting to the internet. The Router for the internet can see the printer. An Apple Extreme is then connected via a network cable in Bridge mode to the router. When I turned the power off the The Apple Extreme and then restored power it all worked. was still working this morning, but again this afternoon I needed to reboot Apple Extreme. It is quite strange that this is happening on two different Networks in different parts of the country at the same time. Maybe the Security Update is somehow affecting/blocking communication with the printer? I just don't know enough. These networks have been up and running with the same printers and computers for years with zero problems - all of a sudden we have the same problem on both Networks.
Any help will be very much appreciated.

After installing several updates, the system is unstable

Hello,
I tried to install my mac mini server several times, all works fine, but after installing the updates from Apple update service, the VPN, Workgroup manager makes problems.
In the last case I installed the last great update for the snow leopard server and the last update was the Safari update. After the Safari update the connection is very slow and I get no VPN connection. Also when I start the workgroup manager for example I need 5 minutes to connect to the server.
thx

Thx for the fast answer....
(Ok tried it once again to install the system with all updates and with the last update (Aiport update for mac mini) the same problem occurs.)
changeip -checkhostname
Primary address = 192.168.1.194
Current HostName = xxxx.local
DNS HostName = xxxx.local
The names match. There is nothing to change.
dirserv:success = "success"
thx

After installing iOS7 update ipad sought passcode disabled restore dead! Now what?

After installing iOS7 update my ipad magically wanted a passcode to open. I tried several of my usual passwords but none worked and it disabled for increasing lengths of time. Eventually after reading up a bit about it I strated to restore it to factory settings but was interupted your this process and was unable to complete it fully (to be honest I'm not keen to do this anyway as I don't want to lose all my data - photos, and fail to see why I should simply becasue of a bug in iOS7). Now my ipad is totally dead and will not respond to anything. What can I do now?

It is still not working. I have had Apple support on the phone twice as each time I get through the restore process it comes up with an unexplained error (3194) which they keep telling me is because I have a firewall preventing it from happening. This is wrong because I have removed the firewall and it still comes up with the error message and will not restore. I now have to take it to the guys I have had look at my computers from time to time to sort it out (presumabley at my cost). If and or when it gets to the point to restore, yes I can restore from iCloud an should get all my data ok but I shouldn't really have to go through all this drama as the iPad is only very new and still under all of it's warranties etc Completely unimpressed with this whole thing.

Podcasts not downloading after installing iTunes update

I just installed the new update, and now NONE of my podcast sources are downloading. I have tried rebooting, and got the same result. I have never before had all of my regular sources unavailable at the same time. Anyone else having this problem after installing the update on a Mac?

ME TOO. Now I want to know how I can DOWNgrade iTunes.
Also, when I have left iTunes open for a while, I come back to it, and the window is all indecipherable garbage.
And don't waste your time. I have done it all, and nothing has helped. I either download podcast by painful podcast or I don't get anything at all.
G4 Mac OS X (10.4.9)

HT201366 CAC readers not working after installing security update 2013-003?

Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

For CAC issues, see:
MilitaryCAC's Mac OS X support landing page
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

After installing an update (on an iMac), can the installer (.dmg) be moved to the trash?

After installing an update (on an iMac of any sort), can the installer (.dmg) be moved to the trash?

If the update is an OS installer, you might want to consider moving it to a folder of an external backup drive for safe keeping. Why? Because Apple removes earlier OS versions when a new one is introduced; there are several threads here about not being able to download Mavericks.
Just a thought. I keep copies of all OS installers. That will come in handy shortly as I just purchased a refurb 2012 iMac because it can run/boot with Mountain Lion which I need for a couple of (important to me) software applications. I have a copy of an ML installer tucked away and ready to go.

MacBook Pro hanging with blue screen and spinner after installing Software Update

Hi I was wondering if someone could help me with this current issue. Just a few hours ago I finished reinstalling Mac OS X Snow Leopard in my MacBook Pro. I performed a clean installation as part of a yearly spring cleaning that I do on all my systems to keep them optimized. So there was I downloading some software updates which included the combo update of OSX 10.6.8 and others. The updates finished downloading and the system logged out to install the updates, when the updates finished installing my MacBook proceeded by logging out into a blue screen and show a gray spinner similar to the one seen when you start your Mac. Here's the problem after 2 hours the system is showing the spinner and the blue screen, I think that my computer has just hanged in the reboot process.
I was wondering what should I do? Do a force restart? Or leave it overnight?
Also, where can I find any information on what error is causing this issue?
I appreciate your responses and help.
By the way, I installed Mac OS X from a USB stick that has the original image of the disk installer that came bundled with my computer.

Kappy wrote:
Force a shutdown. Do not restart yet, but first do the following:
Repair the Hard Drive
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Next, boot into Safe Mode then restart normally.
Hi Kappy,
Checked the hard drive after forcing a shutdown and booting from my Snow Leopard Installer USB Key and the status of the HDD says "Verified". I ran the repair and the volume was repaired successfully. Clicked on "Verify Disk" and it says "Macintosh HD appears to be OK". So I ran a second repair and again no errors were reported.
As suggested I booted back again in Safe Mode and restarted normally. All software appears to have been installed successfully. But I don't understand why my computer hanged and showed the spinner after installing the updates in the blue screen that appears just before rebooting. I am aware that the system shows that spinner after a OS update but the longest it lasts is 30 seconds at the most in my previous cases.

After installing the update I get this message on an app from facebook "502 Bad Gateway nginx" what is the issue and what do I need to do to solve the issue?

after installing the update I get this message on an app from facebook "502 Bad Gateway
nginx" what is the issue and what do I need to do to solve the issue?

Hi there, harleygirl.
A look around the internet and my previous knowledge indicates this is not an issue with firefox, but with how the server that the app is run on is incorrectly configured. To test this, please install an old version of firefox. You can download an older version from http://www.mozilla.org/en-US/firefox/all-older.html then try to visit the website again. Please let us know if it turns out that it works with version 3.6

Removed all changes in Java source after installing Release 2 Update 1 Hot

Similar Messages

Maybe you are looking for