Removed FoxyProxy add-on, now cache access denied errors.

I recently removed the FoxyProxy add-on, and now I cannot use Firefox to access the internet. I get the following error:
The proxy moz-proxy://66.197.138.183:33655 is requesting a username and password. The site says: "Private Proxy Access (USA)"

hello fkilic, please make sure that firefox is set to directly connect to the web - in ''firefox > options > advanced > network - connection settings...'' either set '''no proxy''' or use the system default settings.
[[Firefox can't load websites but other browsers can]]

Similar Messages

After updating to Yosemite Server, one client now has Access Denied error on file sharing.

Just updated the law office from a Mavericks site to a Yosemite site. Everything is working fine except that one client now cannot connect to the file shares - Permission Denied, Contact your system administer error. I've looked through the permissions and even completed a Repair Permissions. What else can I do to get this client on-line with file sharing?

Is the client connecting with the same credentials as the others? I tend to doubt it.

Safari will not load pages cache access denied

Hi,
I am on 10.7.5 and a proxy server. While tying to get the server to stop asking for my password every 60 seconds and following advice on this forum, something seems to have happened and safari stopped loading pages. The message regarldless of the page is:
Cache Access Denied.
The following error was encountered while trying to retrieve the URL: http://www.apple.com/
Cache Access Denied.
Sorry, you are not currently allowed to request http://www.apple.com/ from this cache until you have authenticated yourself.
Please contact the cache administrator if you have difficulties authenticating yourself or change your default password.
Firefox and Chrome work fine - except they still ask for my password at regular intervals.
I managed to transfer my bookmarks to firefox and am just wondering if this is worth it anymore. DO I really need safari? You cannot even re-install it! You have to do the whole operating system. Or should I migrate to Mavericks and a new upgraded safari? I am fed up of trying endless work arounds that simply do not work for me. Emptying caches, disabling extensions, dumping prefs etc
Any help greatly appreciated!

Re trying to get the proxy server to stop asking me for the password, all the steps you recommended which I no longer remember. Something about making sure the proxy settings were in the keychain and open to all applications, then coy to the system keychain. Repair permissions. Tons. Oh and in terminal the following:
sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.UserNotificationCenter.plist
which I think had a major negative impact but I do not know how to reverse it.
I guess I am not advanced to fix these things. Have gone to an internet cafe with normal non-proxy high speed internet and am downloading mavericks now because I am fed up with trying to fix something that never fixes. Safari works here.
Hoping that the uptodate safari will be better.

Firefox MAC v30 with proxy needs authenticate"Cache Access Denied" sorry, you are not currently allowed to request: from this cache until you have authenticated

Firefox was working perfectly before we've updated it to version 30.0. It seems that the new version does not like our Proxy setting which needs users to auth with their AD accounts.
In the past version, Firefox will pop-up a box that allow you to type in the username and password, which works perfect. However, it does not pop-up anymore and gives me this error message.
The following error was encountered:
Cache Access Denied.
Sorry, you are not currently allowed to request:
http://www.google.com.au/url?
from this cache until you have authenticated yourself.
I try to manually set up the username in key chain and allow firefox to access it but Firefox seems do not access that key chain at all.
Is anyone have the issue with the proxy which needs authenticate in Firefox30.0? Does anyone know the possible solutions?
Many thanks!
Shuopan
------------------------------------trouble shoot update-----------------------------------------
Quite interestingly, Firefox will work for 1 minute after I am using Safari with that Auth proxy. However, if I am not touching Safari for 1 or 2 minutes, Firefox will stop working and pop up the similar error message.
tried network.http.use-cache = false but not work
Thanks

Quite interestingly, Firefox will work for 1 minute after I am using Safari with that Auth proxy. However, if I am not touching Safari for 1 or 2 minutes, Firefox will stop working and pop up the similar error message.
Thanks

EFS Encrypted Files over home workgroup network via WebDAV avoiding Active Directory fixing Access Denied errors

This is for information to help others
KEYWORDS:
- Sharing EFS encrypted files over a personal lan wlan wifi ap network
- Access denied on create new file / new fold on encrypted EFS network file share remote mapped folder
- transfer encryption keys / certificates
- set trusted delegation for user + computer for EFS encrypted files via
Kerberos
- Windows Active Directory vs network file share
- Setting up WinDAV server on Windows 7 Pro / Ultimate
It has been a long painful road to discover this information.
I hope sharing it helps you.
Using EFS on Windows 7 pro / ultimate is easy and works great. See
here and
here
So too is opening + editing encrypted files over a peer-to-peer Windows 7 network.
HOWEVER, creating a new file / new folder over a peer-to-peer Windows 7 network
won't work (unless you follow below steps).
Typically, it is only discovered as an issue when a home user wants to use synchronisation software between their home computers which happens to have a few folders encrypted using windows EFS. I had this issue trying to use GoodSync.
Typically an "Access Denied" error messages is thrown when a \\clientpc tries to create new folder / new file in an encrypted folder on a remote file share \\fileserver.
Why such a EFS drama when a network is involved?
Assume a home peer-to-peer network with 2pc: \\fileserver and \\clientpc
When a \\clientpc tries to create a new file or new folder on a \\fileserver (remote computer) it fails. In a terribly simplified explanation it is because the process on \\fileserver that is answering the network requests is a process working for a user on
another machine (\\clientpc) and that \\fileserver process doesn't have access to an encryption certificate (as it isn't a user). Active Directory gets around this by using kerberos so the process can impersonate a \\fileserver user and then use their certificate
(on behalf of the clienpc's data request).
This behaviour is confusing, as a \\clientpc can open or edit an existing efs encrypted file or folder, just can't create a new file or folder. The reason editing + opening an encrypted file over a network file share is possible is because the encrypted
file / folder already has an encryption certificate, so it is clear which certificate is required to open/edit the file. Creating a new file/folder requires a certificate to be assigned and a process doesn't have a profile or certificates assigned.
Solutions
There are two main approaches to solve this:
     1) SOLVE by setting up an Active Directory (efs files accessed through file shares)
          EFS operations occur on the computer storing the files.
          EFS files are decrypted then transmitted in plaintext to the client's computer
          This makes use of kerberos to impersonate a local user (and use their certificate for encrypt + decrypt)
     2) SOLVE by setting up WebDAV (efs files accessed through web folders)
           EFS operations occur on the client's local computer
           EFS files remain encrypted during transmission to the client's local computer where it is decrypted
           This avoids active directory domains, roaming or remote user profiles and having to be trusted for delegation.
           BUT it is a pain to set up, and most online WebDAV server setup sources are not for home peer-to-peer networks or contain details on how to setup WebDAV for EFS file provision
         READ BELOW as this does
Create new encrypted file / folder on a network file share - via Active Directory
It is easily possible to sort this out on a domain based (corporate) active directory network. It is well documented. See
here. However, the problem is on a normal Windows 7 install (ie home peer-to-peer) to set up the server as part of an active directory domain is complicated, it is time consuming it is bulky, adds burden to operation of \\fileserver computer
and adds network complexity, and is generally a pain for a home user. Don't. Use a WebDAV.
Although this info is NOT for setting up EFS on an active directory domain [server],
for those interested here is the gist:
Use the Active Directory Users and Computers snap-in to configure delegation options for both users and computers. To trust a computer for delegation, open the computer’s Properties sheet and select Trusted for delegation. To allow a user
account to be delegated, open the user’s Properties sheet. On the Account tab, under Account Options, clear the The account is sensitive and cannot be delegated check box. Do not select The account is trusted for delegation. This property is not used with
EFS.
NB: decrypted data is transmitted over the network in plaintext so reduce risk by enabling IP Security to use Encapsulating Security Payload (ESP)—which will encrypt transmitted data,
Create new encrypted file / folder on a network file share - via WebDAV
For home users it is possible to make it all work.
Even better, the functionality is built into windows (pro + ultimate) so you don't need any external software and it doesn't cost anything. However, there are a few hotfixes you have to apply to make it work (see below).
Setting up a wifi AP (for those less technical):
   a) START ... CMD
   b) type (no quotes): "netsh wlan set hostednetwork mode=allow ssid=MyPersonalWifi key=12345 keyUsage=persistent"
   c) type (no quotes): "netsh wlan start hostednetwork"
Set up a WebDAV server on Windows 7 Pro / Ultimate
-----ON THE FILESERVER------
   1 click START and type "Turn Windows Features On or Off" and open the link
       a) scroll down to "Internet Information Services" and expand it.
       b) put a tick in: "Web Management Tools" \ "IIS Management Console"
       c) put a tick in: "World Wide Web Services" \ "Common HTTP Features" \ "WebDAV Publishing"
       d) put a tick in: "World Wide Web Services" \ "Security" \ "Basic Authentication"
       e) put a tick in: "World Wide Web Services" \ "Security" \ "Windows Authentication"
       f) click ok
       g) run HOTFIX - ONLY if NOT running Windows 7 / windows 8
KB892211 here ONLY for XP + Server 2003 (made in 2005)
KB907306 here ONLY for Vista, XP, Server 2008, Server 2003 (made in 2007)
2 Click START and type "Internet Information Services (IIS) Manager"
3 in IIS, on the left under "connections" click your computer, then click "WebDAV Authoring Rules", then click "Open Feature"
       a) on the right side, under Actions, click "Enable WebDAV"
4 in IIS, on the left under "connections" click your computer, then click "Authentication", then click "Open Feature"
       a) on the "Anonymous Authentication" and click "Disable"
       b) on the "Windows Authentication" and click "Enable"
      NB: Some Win 7 will not connect to a webDAV user using Basic Authentication.
        It can be by changing registry key:
           [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters]
           BasicAuthLevel=2
       c) on the "Windows Authentication" click "Advanced Settings"
           set Extended Protection to "Required"
       NB: Extended protection enhances the windows authentication with 2 security mechanisms to reduce "man in the middle" attacks
5 in IIS, on the left under "connections" click your computer, then click "Authorization Rules", then click "Open Feature"
       a) on the right side, under Actions, click "Add Allow Rule"
       b) set this to "all users". This will control who can view the "Default Site" through a web browser
       NB: It is possible to specify a group (eg Administrators is popular) or a user account. However, if not set to "all users" this will require the specified group/user account to be used for logged in with on the
clientpc.
       NB: Any user account specified here has to exist on the server. It has a bug in that it usernames specified here are not validated on input.
6 in IIS, on the left under "connections" click your computer, then click "Directory Browsing", then click "Open Feature"
       a) on the right side, under Actions, click "Enable"
HOTFIX - double escaping
7 in IIS, on the left under "connections" click your computer, then click "Request Filtering", then click "Open Feature"
       a) on the right side, under Actions, click "Edit Feature Settings"
       b) tick the box "Allow double escaping"
     *THIS IS VERY IMPORTANT* if your filenames or foldernames contain characters like "+" or "&"
     These folders will appears blank with no subdirectories, or these files will not be readable unless this is ticked
     This is safe btw. Unchecked (default) it filters out requests that might possibly be misinterpreted by buggy code (eg double decode or build url's via string-concat without proper encoding). But any bug would need to be in IIS basic
file serving and this has been rigorously tested by microsoft, so very unlikely. Its safe to "Allow double escaping".
8 in IIS, on the left under "connections" right click "Default Web Site", then click "Add Virtual Directory"
       a) set the Alias to something sensible eg "D_Drive", set the physical path
       b) it is essential you click "connect as" and set
this to a local user (on fileserver),
       if left as "pass through authentication" a client won't be able to create a new file or folder in an encrypted efs folder (on fileserver)
             NB: the user account selected here must have the required EFS certificates installed.
                        See
here and
here
        NB: Sharing the root of a drive as an active directory (eg D:\ as "D_Drive") often can't be opened on clientpcs.
      This is due to windows setting all drive roots as hidden "administrative shares". Grrr.
       The work around is on the \\fileserver create an NTFS symbollic link
          e.g. to share the entire contents of "D:\",
                on fileserver browse to site path (iis default this to c:\inetpub\wwwroot)
                in cmd in this folder create an NTFS symbolic link to "D:\"
                so in cmd type "cd c:\inetpub\wwwroot"
                then in cmd type "mklink /D D_Drive D:\"
        NB: WebDAV will open this using a \\fileserver local user account, so double check local NTFS permissions for the local account (clients will login using)
         NB: If clientpc can see files but gets error on opening them, on clientpc click START, type "Manage Network Passwords", delete any "windows credentials" for the fileserver being used, restart
clientpc
9 in IIS, on the left under "connections" click on "WebDAV Authoring Rules", then click "Open Feature"
       a) click "Add authoring rules". Control access to this folder by selecting "all users" or "specified groups" or "specified users", then control whether they can read/write/source
       b) if some exist review existing allow or deny.
           Take care to not only review the "allow access to" settings
           but also review "permissions" (read/write/source)
       NB: this can be set here for all added virtual directories, or can be set under each virtual directory
10 Open your firewall software and/or your router. Make an exception for port 80 and 443
       a) In Windows Firewall with Advanced Security click Inbound Rules, click New Rule
             choose Port, enter "80, 443" (no speech marks), follow through to completion. Repeat for outbound.
          NB: take care over your choice to untick "Public", this can cause issues if no gateway is specified on the network (ie computer-to-computer with no router). See "Other problems+fixes"
below, specifically "Cant find server due to network location"
       b) Repeat firewall exceptions on each client computer you expect to access the webDAV web folders on
HOTFIX - MAJOR ISSUE - fix KB959439
11 To fully understand this read "WebDAV HOTFIX: RAW DATA TRANSFERS" below
      a) On Windows 7 you need only change one tiny registry value:
           - click START, type "regedit", open link
           -browse to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\MRxDAV\Parameters]
           -on the EDIT menu click NEW, then click DWORD Value
           -Type "DisableEFSOnWebDav" to name it (no speech marks)
           -on the EDIT menu, click MODIFY, type 1, then click OK
           -You MUST now restart this computer for the registry change to take effect.
      b) On Windows Server 2008 / Vista / XP you'll FIRST need to
download Windows6.0-KB959439 here. Then do the above step.
         NB microsoft will ask for your email. They don't care about licence key legality, it is more to keep you updated if they modify that hotfix
12 To test on local machine (eg \\fileserver) and deliberately bypass the firewall.
      a) make sure WebClient Service is running
            (click START, type "services" and open, scroll down to WebClient and check its status)
      b) Open your internet software. Go to address "http://localhost:80" or "http://localhost:80"
            It should show the default "IIS7" image.
            If not, as firewall and port blocking are bypassed (using localhost) it must be a webDAV server setting. Check "Authorization Rules" are set to "Allow All Users"
      c) for one of the "virtual directories" you added (8), add its "alias" onto "http://localhost/"
                e.g. http://localhost/D_drive
            If nothing is listed, check "Directory Browsing" is enabled
13 To test on local machine or a networked client and deliberately try and access through the firewall or port opening of your router.
      a) make sure WebClient Service is running
            (click START, type "services" and open, scroll down to WebClient and check its status)
      b) open your internet software. Go to address "http://<computer>:80" or "http://<computer>:80".
              eg if your server's computer name is "fileserver" go to "http://fileserver:80"
              It should show the default "IIS7" image. If not, check firewall and port blocking.
              Any issue ie if (12) works but (13) doesn't, will indicate a possible firewall issue or router port blocking issue.
     c) for one of the "virtual directories" you added (8), add its "alias" onto "http://<computername>:80/"
               eg if alias is "C_driver" and your server's computer name is "fileserver" go to "http://fileserver:80/C_drive"
               A directory listing of files should appear.
--- ON EACH CLIENT ----
HOTFIX - improve upload + download speeds
14 Click START and type "Internet Options" and open the link
      a) click the "Connections" tab at the top
      b) click the "LAN Settings" button at the bottom right
      c) untick "Automatically detect settings"
HOTFIX - remove 50mb file limit
15 On Windows 7 you need only change one tiny registry value:
      a) click START, type "regedit", open link
    b) browse to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters]
       c) click on "FileSizeLimitInBytes"
       d) on the EDIT menu, click MODIFY, type "ffffffff", then click OK (no quotes)
HOTFIX - remove prompt for user+pass on opening an office or pdf document via WebDAV
16 On each clientpc click START, type "Internet Options" and open it
         a) click on "Security" (top) and then "Custom level" (bottom)
         b) scroll right to the bottom and under "User Authentication" select "Automatic logon with current username and password"
         SUCH an easy fix. SUCH an annoying problem on a clientpc
   NB: this is only an issue if the file is opened through windows explorer. If opened through the "open" dialogue of the software itself, it doesn't happen. This is as a WebDAV mapped drive is consdered a "web folder" by windows
explorer.
TEST SETUP
17 On the client use the normal "map network drive"
            e.g. server= "http://fileserver:80/C_drive", tick reconnect at logon
            e.g. CMD: net use * "http://fileserver:80/C_drive"
         If it doens't work check "WebDAV Authoring Rules" and check NTFS permissions for these folders. Check that on the filserver the elected impersonation user that the client is logging in with (clientpc
"manage network passwords") has NTFS permissions.
18 Test that EFS is now working over the network
       a) On a clientpc, map network drive to http://fileserver/
       b) navigate to a folder you know on the \\flieserver is encrypted with EFS
       c) create a new folder, create a new file.
           IF it throws an error, check carefully you mapped to the WebDAV and not file share
              i.e. mapped to "http://fileserver" not "\\fileserver"
           Check that on clientpc the required efs certificate is installed. Then check carefully on clientpc what user account you specified during the map drive process. Then check on the \\fileserver this
account exists and has the required EFS certificate installed for use. If necessary, on clientpc click START, type "Manage Network Passwords" and delete the windows credentials currently in the vault.
       d) on clientpc (through a webDAV mapped folder) open an encrypted file, edit it, save it, close it. On the \\fileserver now check that file is readable and not gobble-de-goup
       e) on clientpc copy an encrypted efs file into a folder (a webDAV mapped folder) you know is not encrypted on \\fileserver. Now check on the \\fileserver computer that the file is readable and not gobble-de-goup (ie the
clientpc decrypted it then copied it).
        If this fails, it is likely one in IIS setting on fileserver one of the shared virtual directories is set to: "pass through authentication" when it should be set to "connect as"
        If this is not readable check step (11) and that you restarted the \\fileserver computer.
19 Test that clients don't get the VERY annoying prompt when opening an Office or PDF doc
      a) on clientpc in windows explorer browse to a mapped folder you know is encrypted and open an office file and then PDF.
            If a prompt for user+pass then check hotfix (16)
20 Consider setting up a recycling bin for this mapped drive, so files are sent to recycling bin not permanently deleted
      a) see the last comment at the very bottom of
this page:
Points to consider:
   - NB: WebDAV runs on \\fileserver under a local user account, so double check local NTFS permissions for that local account and adjust file permissions accordingly. If the local account doesn't have permission, the webDAV / web folder share won't
either.
- CONSIDER: IP Security (IPSec) or Secure Sockets Layer (SSL) to protect files during transport.
MORE INFO: HOTFIX: RAW DATA TRANSFERS
More info on step (11) above.
Because files remain encrypted during the file transfer and are decrypted by EFS locally, both uploads to and downloads from Web folders are raw data transfers. This is an advantage as if data is intercepted it is useless. This is a massive disadvantage as
it can cause unexpected results. IT MUST BE FIXED or you could be in deep deep water!
Consider using \\clientpc to access a webfolder on \\fileserver and copying an encrypted EFS file (over the network) to a web folder on \\fileserver that is not encrypted.
Doing this locally would automatically decrypt the file first then copy the decrypted file to the non-encrypted folder.
Doing this over the network to a web folder will copy the raw data, ie skip the decryption stage and result in the encrypted EFS file being raw copied to the non-encrypted folder. When viewed locally this file will not be recognised as encrypted (no encryption
file flag, not green in windows explorer) but it will be un-readable as its contents are still encrypted. It is now not possible to locally read this file. It can only be viewed on the \\clientpc
There is a fix:
      It is implimented above, see (11) above
      Microsoft's support page on this is excellent and short. Read "problem description" of "this microsoft webpage"
Other problems + fixes
PROBLEM: Can't find server due to network location.
     This one took me a long time to track down to "network location".
     Win 7 uses network locations "Home" / "Work" / "Public".
     If no gateway is specified in the IP address, the network is set to '"unidentified" and so receives "Public" settings.
     This is a disaster for remote file share access as typically "network discovery" and "file sharing" are disabled under "Public"
     FIX = either set IP address manually and specify a gateway
     FIX = or force "unidentified" network locations to assume "home" or "work" settings -
read here or
here
     FIX = or change the "Public" "advanced network settings" to turn on "network discovery" and "file sharing" and "Password Protected Sharing". This is safe as it will require a windows
login to gain file access.
PROBLEM: Deleting files on network drive permanently deletes them, there is no recycling bin
       By changing the location of "My Contacts" or similar to the root directory of your mapped drive, it will be added to recycling bin locations
      Read
here (i've posted a batch script to automatically make the required reg files)
I really hope this helps people. I hope the keywords + long title give it the best chance of being picked up in web searches.

What probably happens is that processes are using those mounts. And that those processes are not killed before the mounts are unmounted. Is there anything that uses those mounts?

I get an access denied error when logging into extension builder 2.1 on Flash Builder 4.6

I get an access denied error when logging into extension builder. The error is: You are not eligible to use CSIDE1 services due to the Service Eligibility Requirements.. Very frustrating since there is no other option than to read the adobe legal docs.
Before this started happening I was prompted to put in my birthday (WHO KNOWS WHY ADOBE NEEDS MY BIRTHDAY). I filled it in wrong and now this....
PLEASE HELP

Ok this problem is fixed.
Info for anyone else who faces this problem.
Apparently when adobe designed the extension builder installer package, they decided to get cute and try to figure out what version of the software, the extension builder package files should be installed into. So if you have FB4, FB4.6, and FB.7 there is no telling where it will go. Also if you try moving these folders somewhere else out of the applications directory, the installer will still find them on the system. I finally figured this out by watching my system log and seeing
11/22/13 12:13:46.258 AM cp[70909]: Cannot make directory /Applications/Adobe Flash Builder 4.6/Adobe Flash Builder 4.6.app
Location: /Users/myuser/Downloads/Adobe Flash Builder 4.6-adobegarbage/plugins/com.adobe.cside.ui_2.1.0.201304282312/icons: No such file or directory
After removing every single instance of places the package installer was trying to use. It finally resolved to the correct FB4.6 location. Why adobe could'nt spend a little extra time add a destination selector in the package installer is beyond me, but hey i only wasted 3 days trying to figure this out.... Sadly it isnt the first time i've wasted copius amounts of time fighting Flashbuilder problems.
Halligrimur, thank you for your help. It did lead to me solving the problem.

Access Denied error on Registry Key with CRXIR2A SP6

We ship now the latest CRXI version (2ASP6) with our application. One of our users (Win7 Home SP1) gets an error on instantiating a report. Using ProcMon.exe this seems to be caused by an Access Denied error when accessing the HKLM\Software\Wow6432Node\Business Objects\Suite 11.5\Crystal Reports key. What can be the cause?

Hello Ludek,
I had to take ownership and then change persmissions to full. The problem did not go away however. As I noticed that the register key mentioned did not contain any subkeys I tried to remove it. This again failed because of persmission denied error. Funnily some subkeys suddenly showed up. I took ownership, changed permissions and tried again. Lo and behold the subkeys I tried to delete (and in which no subkeys were visible) suddenly showed more subkeys. At this point I stopped fearing that I was damaging the client's computer. The subkeys were related to the RAS server. Does that say anyting to you?
André

Access Denied Error while accessing "Site Settings Access requests and invitations"

Hi,
I am getting Access Denied Error while accessing "Site Settings > Access requests and invitations" in SharePoint 2013 online. Currently I am the owner of the site and have "FULL CONTROL" access. I am able to access using
site collection account. So, what permission I have to give my regular account to access this page?
Thanks, Pal

Hello,
Have you recently changed the Owners group of the site collection or removed the user from the original owners group?
The reason I am asking is when the Access requests and invitations list are created, the permissions are given only to the default owners group at the time that the Access Request list was created. If this "regular account" is not part of that owners
group, the user will receive access denied. Site Collection Admins always have permissions for the Access Request List.
A workaround for the Access Denied issue is listed in the KB article http://support.microsoft.com/kb/2911390/en-us. By giving the correct group or user the permissions to this list, the users will not receive
the Access Denied issue anymore.
Preferably, in order to grant the user the full permissions ( you will see features like resending invitations may still fail after implementing the above workaround) there is one other workaround that may be required depending on what the original issue
was. Below are additional steps to restore full functionality.
1)Access the /_layouts/15/permsetup.aspx of the site collection, make sure the default Owners Group
is set correctly. (There is a group selected)
2) Add user to that Owners Group. (Issue may be resolved at this step if the site collection Owners
Group was never changed, if not continue to next step.)
3) Implement workaround on http://support.microsoft.com/kb/2911390/en-us, by adding that owners
group as Full control on Access Request list Permissions.
Let me know how this works out for you.
- Shpendi Jashari

Access denied error in feature receiver code when deploying-activating custom timer job feature

hi,
am creating a sp timer job for a updating a list.when i write this code in a the event receiver featureactivated method, and when i activate this feature , am getting access denied error.
but, when i deploy this timer job [ without feature receiver] through powershell, it works.
i didnt run this feature receiver with runwithelevatedprivileges delegate - i think this wlll NOT solve the issue.
from one of the posts i seen that, current logedin user needs to be part of config database roles. i didnt understand this point. how can i add my current loge din user into the sp_config database roles? is it through SSMS 2012?
or
is there any way to achieve without feature event receiver?
otherwise i will be forced to write my business logic in a console appln and add this exe in a windows scheduler.!
help is appreciated!

hi Waqas,
i have ran that powershell script you have pointed to me.
function Set-RemoteAdministratorAccessDenied-False()
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") > $null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Administration") > $null
# get content web service
$contentService = [Microsoft.SharePoint.Administration.SPWebService]::ContentService
# turn off remote administration security
$contentService.RemoteAdministratorAccessDenied = $false
$contentService.Update()
now i need to test the functionality from the event receiver after Activate feature button click.
BTW, i have written a console appln for my business logic and created an exe.
also, should i test it with a web application levels coped feature instead of site collection level feature? this thread talks abt the same:
http://social.technet.microsoft.com/Forums/en-US/f41810ec-2348-436d-a574-c29656f3a567/access-denied-error-when-running-timer-job-from-feature-activated-event?forum=sharepointgeneralprevious
thx

Access denied error while trying to install graphics drivers

Hello,
I have a new toshiba laptop P70-A. I have installed windows 7 and the pc was working excellent up until now. Noticed yesterday that the nvidia automated system failed to install the new update. When I tried to install the new driver manually, even from the
device manager, I got the access denied message.
A day now wasted reading all the possible causes and solutions but with no luck. Read all the forums and all the posts, tried almost everything. Below youll find everything I tried as a solution and failed.
1.Disabled UAC
2.Enabled the administrator account and trying to take control from there
3.Run the subinacl and the reset.cmd
4.Tried manually to take control the folder windows (and access denied while changing the rights)
5. Scanned the system with everything there is available ( Kaspersky, MalwareBytes, RegCurePro, Tuneup Utilities, CCleaner) The system came out clean.
6. Tried restoring the system to an earlier time (got again access denied error code 0x80070005)
7. Checked all the group policies (all seem to be fine)
8. Run a script to take immediate ownership over all of C:
TAKEOWN /A /F C:
then the next one
TAKEOWN /F C:
9. With subinacl I run all the above scripts... (still nothing changed)
@echo off
title Resetting ACLs...
echo.
echo Determine whether we are on an 32 or 64 bit machine
echo.
if "%PROCESSOR_ARCHITECTURE%"=="x86" if "%PROCESSOR_ARCHITEW6432%"=="" goto x86
set ProgramFilesPath=%ProgramFiles(x86)%
goto startResetting
:x86
set ProgramFilesPath=%ProgramFiles%
:startResetting
echo.
cd /d "%ProgramFilesPath%\Windows Resource Kits\Tools"
echo.
echo Resetting ACLs...
echo (this may take several minutes to complete)
echo.
echo IMPORTANT NOTE: For this script to run correctly, you must change
echo the values named Athena to be the Windows user account that
echo you are logged in with.
echo.
echo ==========================================================================
echo.
echo.
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators > %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
echo System Drive...
subinacl /subdirectories %ProgramFilesPath%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo Windows Directory...
subinacl /subdirectories %windir%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo ==========================================================================
echo.
echo FINISHED.
echo.
echo Press any key to exit . . .
pause >NUL
Im frustrated really... ANY help at all would be really appreciated.
Thanks in Advance and sorry for the long post
Athena

Hello,
Thanks for the replies, i much appreciate it. I tried all of the above with no luck again. Safe mode allows me though to install drivers but thats reverting the moment im entering windows. Im always running commands and programs as a administrator or in
the Admin enabled account.
It seems the problem is solved today. Via tune up utilities I disabled most of the startup programs and services and it seems that 1 service is causing this issue. Although I havent played much with the disabled services but 3 remain to be checked. One of
the three is causing this.
Thanks again guys and Ill keep you posted about the soft. conflict.
Athena

Access denied error for Java application on 2630

Hello!
I have bought a 2630 recently. Now I have installed a small Java application that tries to store some data in the phones memory. However, each time the application tries to do so, I get a "java.lang.SecurityException Access denied" message and the application states that it could no save its data. I have set the security settings for that particular application so that the phone should ask before each access to the file system. In fact, before I get the error message, the phone asks whether the application may write data to the file system. But still answering that question with "yes" I get the Access denied error message. Now I am puzzled. By the way, the application uses JSR-75 which the 2630 should support.
Anybody any ideas?
Regards,
Volker

RESOLVED!
I was able to create file from java application on Nokia 2630. Here is how:
1. root C:/ is mapped to folder "Downloads"
2. The folders does not show with their names
3. there are 2 folders in C:/ predefgallery and predefjava
4. in predefgallery there are several predefined folders e.g. predefrecordings is one of them
5. I am able to create file inside predefrecordings, creating file in upper folders is denied
6. user created folders aro NOT shown at all
7. I had to manualy confirm reading of data many times and writing data once.
I hope this can help to other Nokia users since I did not find this anywhere.
Luke

Error "creating file: 1008:5, -5000 Access Denied Error"

I'm unable to install Flash Player 9 in OS X (10.4.8). I
followed the following tech note:
http://www.adobe.com/go/4aa64290
* I uninstalled Flash Player using the uninstaller
* I repaired disk permissions
* I tried re-installing Flash Player
I still get the error message saying I don't have the
appropriate permissions.
Some background: I'm upgrading from a G5 tower to a new Mac
Pro. I ran the migration utility to copy over my user settings,
apps, etc. I noticed that pages with Flash were crashing the
browser(s) instantly. Of course, that's because the PowerPC version
was previously installed. I uninstalled and tried to re-install.
When I got the above error, searched the support area and found the
tech note saying to uninstall (done), repair permissions (done),
then re-install (fails.)
I'm stumped.
Any suggestions?

I have the same problem, after trying more than a few times
to install the
player, uninstall it, uninstall the Firefox 2, reinstall
Firefox... with the
same result : it says that I need a plugin, and put me to the
page of the Flash
player installer...
I had this new error message after erasing, as it was
proposed on a forum, the
Internet plug-ins directory... "creating file: 1008:5, -5000
Access Denied
Error"
I never had this message before. I have all the rights and
have installed lots
of softwares. I tried to use the terminal way... but this is
a long way for me
on a Mac... I would be able on a PC but I can't even
"navigate to this
directory"...
Do I have to say that this Flash player is now quite
important for lots of web
sites... This is really the first time I have a problem with
Flash. Is it the
Intel Mac ?? No, it seems Windows have also its probs. Thanks
for a reply... or
a solution !

403 Access Denied Error

Dear SAP Experts,
We have an inbound scenario, which uses AS2 adapter connectivity.
Trading Partner AS2 --> Seeburger AS2 (SAP PI 7.1)
SAP PI uses HTTPS protocol, while Trading Partner uses HTTP protocol.
Our trading partner is using Mozilla Firefox, and they tried pinging the inbound URL of SAP PI, but they encountered 403 Access Denied Error. They already loaded the SSL certificate of SAP PI in their server.
Is Mozilla firefox application is not advisable for the connection?
I've tried pinging the inbound url in public internet, and it was successful. (405 Status)
Kindly advise.
Thank you..
Gerberto

Hi Gerberto,
Pls check the following:
1) AS2ID of the party for you partner in PI is the correct.
2) AS2ID of the party which is receiving messages is the correct.
3) whether the the AS2 certificates updated properly or not (might be cache issues) either at your end or the third party's end.
4) the path that you mention in the Receiver/ Sender Agreement for the certoficate location might be wrong.
the other reasons for 403 errors and eliminate one by one.
403.1 - Execute access forbidden.
403.2 - Read access forbidden.
403.3 - Write access forbidden.
403.4 - SSL required.
403.5 - SSL 128 required.
403.6 - IP address rejected.
403.7 - Client certificate required.
403.8 - Site access denied.
403.9 - Too many users.
403.10 - Invalid configuration.
403.11 - Password change.
403.12 - Mapper denied access.
403.13 - Client certificate revoked.
403.14 - Directory listing denied.
403.15 - Client Access Licenses exceeded.
403.16 - Client certificate is untrusted or invalid.
403.17 - Client certificate has expired or is not yet valid.
Also you can refer the following thread...
Seeburger AS2 Sender Adapter : http: 403 error
Regds,
Pinangshuk.

Access Denied Error when Installing Suitcase

I am encountering an Access Denied Error when installing Suitcase X1 on a 600 MHz G3 ibook running 10.4.3 with all updates and it gets to 2 items remaining to be installed and I get access denied error and then another screen pops up and says "You do not have enough access privileges for this installation". I am logged in as an administrator, I tried creating a new Administrator account, I have repaired permissions, I have tried downloading a new file, all with no luck and now I am stuck. Any ideas?
G3 Pismo, G4 Desktop Mac OS X (10.4.3)

Hi,
Firstly, please let us know if it is a workgroup or domain environment.
Also, please let us know more details about the configurations of the server and clients.
Meanwhile, you can check the settings by referring to the following:
Allow someone to connect to your computer using Remote Desktop Connection
http://windows.microsoft.com/en-HK/windows7/allow-someone-to-connect-to-your-computer-using-remote-desktop-connection
Remote Desktop Connection: frequently asked questions
http://windows.microsoft.com/en-hk/windows/remote-desktop-connection-faq#1TC=windows-8
If issue persists, please provide us the unedited error message or screenshot for further research.
Thanks.
Jeremy Wu
TechNet Community Support

Random Access Denied Errors in Document Library

We have an issue ongoing in our environment where randomly a user will be attempting to upload a document to a document library that they have appropriate contribute rights to, and they will receive an access denied error. This happens to external customers
who are authenticating via LDAP credentials that they have been provided. I am seeing no errors in the logs that show the users actually receiving an Access Denied error.
The users are uploading 1-3 pictures or pdfs one at a time. The error will occur randomly during the upload process.
Any help with this matter is appreciated.
Thanks,
Chad

Prasath,
Thanks for the reply. It is random users, right now its about 5 people it is happening to. When I say it is random, I mean that they may be able to upload 2 out of their 3 pictures or .pdfs and then on the third the error occurs (Just an example).
I have not used fiddler and I have not checked IIS Logs but I will do so, the next time it occurs.
What specifically would I be looking for in our AAM settings? I can't think of anything that would cause the issue to behave so intermittently.
Thanks,
Chad

Removed FoxyProxy add-on, now cache access denied errors.

Similar Messages

Maybe you are looking for