Removed Lion Recovery Partition!

I have removed the Lion Recovery partition and shat should I do now to get that back again?

Download Carbon Copy Cloner and WinClone 3
Get two blank external drives, make sure they are formatted GUID and OS X extended journaled in Disk Utility (actually check Winclone for their external drive format requirments for Windows)
Use CCC to clone the OS X partition to one external drive.
Use Winclone to clone the Windows Boot Camp partition to the other external drive.
Disconnect all drives.
Now the problem is how to get Recovery HD back onto the machine.
If you upgraded 10.6 to 10.7/10.8, then hold option/alt and boot off the 10.6 disk, use it to erase the entire internal drive of everything, then install 10.6, upgrade to 10.6.8 and reinstall 10.7/10.8 from AppSore by option click on Purchases or whatever it uses, that will put the Recovery HD back on the machine.
If your machine came with 10.7 or 10.8, then hold the command option and r keys down and boot the machine on a fast Internet connection (Ethernet the router preferred) and this will load Internet Recovery from Apple's servers. Use Disk Utility there to erase the entire drive of everything and quit, then reinstall OS X from Apple's servers, it will recreate the Recovery HD partition that way, as it's assuming it's a new drive it's installing on.
When you have your machine in order, go to BootCamp and set up your partition again, then quit.
Hold the option/alt key down and boot off the OS X "CCC" clone you made, now use CCC to reverse clone OS X back onto the internal drive.
Connect the Winclone drive, run Winclone and clone that back onto your BootCamp partition.
When done, reboot and disconnect all drives, head to System Preferences > Startup Disk and set it to either OS X or BootCamp as the default boot. As you know if you change your mind to hold option key at boot to go to the other instead.

Similar Messages

Recover the lion recovery partition?

Hi all,
After removing bootcamp partition my lion recovery partition is missing. Is there any way to recover the recovery partition?
Thanks..

You might get a better answer if you post in the OS X Lion forum...

How do I install just the Lion installer via the lion recovery partition.

I am trying to bootcamp windows 7 on my new macbook pro (early 2011), the installation was successfull but i am missing drivers on the windows side and cannot access the internet until i install them. I installed all the bootcamp updates and put them on a usb to transfer to windows partition but windows kept telling me i need an earlier version of bootcamp which is not available from the update support downloads section of the apple website.
After some research i realized i needed the mac boot disc for lion, which doesnt exist so i need to create my own. I was told i could install lion from the lion recovery partition.
here is my question....If i install lion onto my mac partition that currently has lion, can i stop the download after the initial 4 gb installer and not go through with the full re-installation of lion? so that i can then take the installesd.dmg (i think thats right) file and put it on a dvd to install from the windows partition and finally get the drivers i need to get it running.
Comment: based on what i have read on how you used to bootcamp a mac, apple has made it very difficult, unneccesarily difficult it seems.

Before you do anything else, I suggest a thorough read of this:
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

How can i completely remove the recovery partition?

Hi, i own an HP notebook model Pavilion 15-e070sl and i want to know how i can remove the recovery partition. I just performed a clean install from my System Recovery DVDs and i don't need the recovery partition anymore (since i got those DVDs), so i decided to delete it from the HP Recovery app; now the data has been deleted but i have a 17GB circa unallocated space on the disk, and i'd like to merge it with C to get some more space, but i don't know how to do it. I tried with thw windows disk management and i can't, i tried with easeus partition master but after moving those two little partitions before the unallocated space or even deleting them (see the pic http://img850.imageshack.us/img850/6928/1lge.png) i can't expand C: to get rid of the unallocated space.
Any suggestion?
This question was solved.
View Solution.

Hi,
Assuming E: is the Recovery Partition. Please try:
Right-click Computer > Manage > Storage > Disk Management, then right-click the graphic of the E partition and select Delete. The partition returns to Unallocated for a Primary Partition or Free Space if it‘s a Logical Drive within an Extended Partition. Delete the partition if it is an Extended partition.
Now right-click the graphic of the C partition and select Extend.
Note: C and E must be sitting next to each other.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Will reinstalling Lion via the Lion recovery partition cause you to loose all of your applications, documents, etc or does it just replace the Lion operating system and leave everything else untouched?

Will reinstalling Lion via the Lion recovery partition cause you to loose all of your applications, documents, etc or does it just replace the Lion operating system and leave everything else untouched?

The latter. I cant tell you how many times I've reinstalled lion! all your apps will be fine!
Things that will change are system graphics if you altered them with something like candybar or did it manually.
Having said that, you should always backup your stuff with time machine incase something does happen.
This is a very important step which will insure the safety of your files while doing things like updating or installing the OS.
Please exercise caution when doing things with a Hard Drive.

How to rename a hidden Lion recovery partition?

I want to put a Lion recovery partition for each post Snow Leopard computer I'm supporting, but can't find a way to rename them, so that I don't have a bunch of identically named partitions to choose from. Any ideas?

First enable Disk Utility's Debug menu by entering this in Terminal:
defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool YES
Then relaunch Disk Utility. Under the Debug menu, select "Show Every Partition". The Recovery HD will appear in the sidebar. Click it once, and then click "Mount" in the toolbar. The Recovery HD will then mount on the Desktop, where you can rename it like any other Finder item.

File Vault 2 and Lion Recovery Partition

Has anyone noticed that the Lion recovery partition disapears after enabling File Vault 2? I don't have one anymore. It's Gone!

Check out the OS X Lion: About FileVault2 kb.
Starting from the Recovery HD partition after FileVault 2 is enabled
When FileVault 2 is enabled, Recovery HD does not appear in the Startup Manager (which is accessed by holding Option during startup). However, you can select the Recovery HD by holding Command-R as Lion starts up.

Lion Recovery partition on 2011 MacBook Airs

I did a post for my blog yesterday concerning the use of the Lion recovery partition in solving the problem of turning on Find My Mac. I've had a very positive response from readers, most reporting success. But one has raised a question I cannot answer.
Here is the original article
http://www.macfilos.com/home/2011/10/16/icloud-cannot-turn-on-find-my-mac-recove ry-system-update-req.html
My reader maintains that the Lion recovery partition is not active on her 2011 MacBook Air. She has the latest OS X build and has also installed the Lion Recovery update. I can't really believe this, but I only have a 2010 Air to play with. Can someone confirm or deny?
The problem I (and many others) had was that the recovery update was not being recognised, the reason being a corrupt volume. After repairing the volume using the recovery partition it was then possible to reinstall the recovery update and subsequently turn on Find My Mac. It could be that my reader has a more intransigent version with the same cause that needs additional work.
Michael

If she enters in Terminal
diskutil list
if there is a Recovery Partition, she'll see:
Apple_Boot Recovery HD 650.0 MB disk0s3
as the last partition.
See also: https://discussions.apple.com/message/16417843#16417843
Tony

How to delete lion recovery partition

i have mac book air 13inch with 128g hdd
when i install lion, it creats lion recovery partition on my HDD
and it does not clear out and stays all the time
i want to delete the lion recovery partition and make my HDD united to only one partition
how can i do this?
it there any way to do this?
help me~~~

You could, but not recommended. The recovery partition is
there so that you can repair or re-install Lion if necessary.
I don't recall, but I think some people have had issues with
some Mac models booting Lion if a Recovery HD is not
present. Not sure if the Air is one.
First, to be safe, you should probably make a USB stick
installer or DVD for Lion should things go south on you and
have to reinstall from scratch.
Next,the simplest approach would be to clone your Lion
install to an external, bootable hard drive using either
Carbon Copy Cloner or Super Duper. When that is
complete boot to that volume then reformat the internal
volume, then clone the external volume back.
Don't interrupt any of the processes or you could
end up with a MacBrick.

How do I install a Lion Recovery Partition

I recently installed a new Hard Drive in my Early 2011 Macbook Pro, and I was wondering if there was any way I could out the Lion Recovery Partion on it.
Thanks In Advance

CCC Carbon Copy Cloner has a utility called "Disk Center" that is included with CCC that will create a Recovery Partition for you. I understand that CCC is not free, but it does have a free 30 day trial.
The "Disk Center" in CCC Carbon Copy Cloner is not obvious or easy to find, unless you know where to look for it (in the Window menu pulldown)... it's easy to miss. Once you find it in the CCC menu system, it is a quick (<5min) turnkey way to create a Recovery HD Partition on any disk, internal or external.
I thought I should share this, since I burned several hours of pain-staking research and experimentation in search of how to create/re-create a "Recovery HD" Partition for my MacBook Retina Mavericks laptop. My journey was varietal, including:
Successfully using a manual set of instructions with Terminal to execute a multi-step approach that worked ( http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html )
As well as a utility from musings.slivertooth.us that worked for me as advertised. Only problem is that while I appreciate and respect the great utility that guy created, my risk-averse nature prevents me from using a non-commercial utility to muck with the low-level details of my boot drive. Great job, but I prefer CCC since it's backed by a commercial SW company. Here's his great uility, as referenced in Apple discussion threads like this one: ( http://musings.silvertooth.us/2012/03/restoring-a-lost-recovery-partition-in-lio n/ )
Therefore, I was relieved to discover that CCC has a utility specifically designed to do this for me.
FYI: How did I find myself in this position? I lost my Recovery HD partition because I used Super Duper to Clone my HD/SSD, and subsequently restored my MacBook at one point. Super Duper has worked awesomely well for me for several years. It clones HDs/SSDs without a glitch, and makes them bootable automatically. The only gap or lack of function I have discovered is that "Super Duper" does not Clone the "Recovery HD" Partition. CCC Carbon Copy Cloner does. So, while I like Super Duper, I'm switching to CCC Carbon Copy Cloner for my backups from now on.
Disclaimer: I don't work for CCC. I'm just an I/T Professional that needed to figure out how to create/re-create a Recovery HD Partition...

Problem creating Mtn Lion Recovery partition on external drive.

USB external. Newly erased, three partitions: one 2GB for Recovery HD, other two backups of my old SL machine and new ML machine (Mini). Those work and their respective machines fine. Drive seems OK.
    Used Recovery Disk Asst v. 1.0 to create Recovery HD on the small partition while booted into 10.8.2 (the brand new Mini). Factory installed Mtn Lion Recovery HD exists on internal drive and it works— when starting with command-R or command-shift-R, not with Option key.     Install of Recovery HD to external seemed to go fine and doing a "diskutil list" in Terminal showed both the internal and external Recovery HD's, properly named as such.   However, when restarted with Option down the recovery partition showed up named the same as my internal— at that point "Macintosh HD" but later when I changed the internal's name, reinstalled the Recovery HD, and restarted with Option key the recovery partition now was named the same as new internal drive name.   Both times choosing the recovery partition resulted in booting into internal drive.
Was wondering if anyone had a similar problem— and found solution/reason.   Apple Tech Support particularly not helpful/knowledgeable on this subject.

Hi Baltwo
   Really appreciate the help.   Many thanks.     Finally seems to be working.     Not sure exactly what worked but in case you're interested I'll give you a, hopefully, short summary:
Using DU (after copy/paste of the command you wrote above into Terminal) I cloned the working internal drives RDH to the partition for it on the ext.   Failed— still seemed to work as almost an alias pointing at the boot volume on the internal.
So, erased the external again; didn't partition, did a reinstall of ML from DU while booted into RDH of internal. Then started from that new ML partition on external and let Setup Asst migrate everything over from the internal to keep Users/Permissions from being a problem.
    When that finished I tried to restart w option key.   Got a recovery HD that was called exactly that but, again, booted into internal boot drive.   Booted into internals RHD just to make sure it was OK and it was.
   For whatever reason again restarted w option key.   This time I got four choices: the boot volume of internal and external, an ext volume called Recovery HD (the trickster), and another volume called Recovery 10.8.3.   Something new— and, as Bill Murray said in Ground Hog Day, "anything new is good."   So I tried booting into that new RHD 10.8.3. (Note, I'm still running 10.8.2 on boot volumes.)
And that worked— booted into Recovery HD but no way that I could figure to see for sure that it was the Recovery HD on ext vs. on internal.   I think I need to activate the Debug menu on the RHD DU so I can choose the 10.8.3 recovery and see if I have the option of Repairing the disk or it's greyed out. If greyed, then proves I'm booted into it.   Might be a more elegant way to see that but it's the one I know.    Still, I assume I was in the RHD on the external.
Then made a second partition for the old mac's backup and that initially resulted in the boot volume of the internal backup not be mountable but after a restart or two testing the two RHD's, the mini decided to see all the volumes and things are, for the moment, copacetic.
Hope that wasn't too long and boring.    From my experience and reading on the 'net, my general sense is that there are a bunch of variables that all have to be right for this process to work. Probably less is more and just installing ML on a disk by itself will be the most reliable method, if most wasteful of data storage.
Regardless, couldn't have done it without you, baltwo.   I don't use this forum enough to know what the etiquette and protocols are but I marked all of your posts as useful, which they were, and, finally, as solving my issue, which they did.
Thanks again

USB disk with Lion recovery partition + storage partition shared by Mac & Windows: Windows can't read it.

I have a Lexar Express Card flash drive (16GB). It works the same as any USB flash drive.
I use it to move files between Mac OS and Windows 7/Bootcamp: Drag files to it in one OS, reboot in the other OS, take the files back off.
Recently, I discovered the Lion Recvoery Disk Assistant, which allows you to create a Lion Recovery Disk on an external drive (just in case). So, I decided I would use a ~1GB partition on the express card for the recovery disk, and leave a ~15GB partition for the same file sharing I am used to.
This setup requires that the disk use a GUID Partition Map with a HFS+ file system for the recovery partition, and I use a FAT32 file system for the shared partition. The partitioning was done in Mac OS Disk Utility, and then I think the Recovery Disk Assistant modifies it further by adding an EFI partition.
When I try to access the disk in Windows 7, it says it needs to format the drive first (which it shows to be a ~200MB "volume" on a disk with ~15.4GB "capacity"). From what I have been able to find on my own, Windows 7 should be fine with a disk using a GUID Partition Map, and both OSs can use a FAT32 file system. So why does Windows only see the 200MB EFI partition at the first section of the disk, and not the other partitions, particularly the FAT32 file sharing partition?
The last thing I will mention is that the disk is being seen by Windows as a MBR/Master Boot Record partitioned device. I'm assuming this is the GPT/GUID Partition Table's protective partition's fault; the one MBR partition that keeps the GPT partitioning safe from software that doesn't recognize or know about GPT.
I'm asking on the Apple discussions because it's in Boot Camp and I'm primarily a Mac user. If anyone knows a better, Windows-focused place to ask, please say so!

You really need to search first as there are A LOT of post's with the same question. Different issues with different Models.
What model/year do you have and what OS were you using first? Snow Leopard (10.6) is the last one that came with a CD/DVD with the computer.
You insert the disk when it's done installing W7 and reboots into Windows then you insert the 10.6 MacOS Installer disk for the Windows drivers. Lion does it a different way.
PR7 wrote:
...........because I lost the OS X Lion install disk that came with my Mac)..........
Lion (10.7) is only a download now, there are no more physical disk's, (unless you pay the extra money for the USB installer thumb drive directly from Apple). So if your computer came with 10.7 Lion installed then you will not have a physical disk. There should be a "Repair Partition" that you use to boot to if you need to repair or to reinstall the Lion OS.
PR7 wrote:
However, when I log on my Windows account and I insert the bootable OS X Lion install disk, Windows doesn't read it. I can't even find the disk in Windows Explorer or even Right Click on the disk.
Please Help!
Thank You!!!
I don't believe the Boot Camps drivers are in the Lion download anymore, ( to keep the download smaller?), the only way you get them now is when you start BCAssistant, it will prompt you to download them onto a CD, or USB drive. You have to download and install the Boot Camp drivers separately. You then insert it when it's done, when Windows boots.

Restoring from Lion Time Machine backup and keeping Lion recovery partition

I am installing a new hard drive in my MacBook Pro. I have a Time Machine backup of everything, but I'm aware that just restoring the Time Machine backup to the new drive will not restore the Lion recovery drive/partition. What is the best way to move my data to the new drive? Am I best doing a clean install and moving everything over by hand from the Time Machine backup?

I've just done this. I booted from a Lion Recovery USB stick then restored from a Time Capsule. I had no RecoveryHD partition after it.
However, if you download and run the Lion installer once you log in to your desktop it will re-create the RecoveryHD partition. Long way round though.
Best solution is to make a bootable USB (8GB) or DVD from the Lion installer App. Then do a new install of Lion to get the Recovery HD partition created. Once installed you can restart and boot up using the newly created Recovery HD and restore your entire computer from the Time Capsule. Hey presto, your computer should be back to the way it was.

Mac OS X Lion Recovery partition lost

For whatever reason, the recovery partition on my mac is not showing up. Find My Mac requires a recovery partition to run.
I was wondering if there is a way I can create/recreate a recovery partition in lion.
Thanks,
Matt

i forgot to mention that i use Filevault 2

Can one add apps to a lion recovery partition on external hd?

OK, so Lion Recovery Disk Assistant "lets you create Lion Recovery on an external drive that has all of the same capabilities as the built-in Lion Recovery." But can I add utility/diagnostic apps to the external drive, such as Disk Warrior?

If you want to have a fully bootable and functional backup OS, clone your internal drive to a partition on an external drive. Use a utility such as Carbon Copy Cloner to do it. This clone will have all apps and docs installed and usable if you need to boot to it, current as of the date the last clone was made.

Removed Lion Recovery Partition!

Similar Messages

Maybe you are looking for