Removed nas drive error on startup

I have removed a nas drive from my network but everytime I restart my imac I get an error message that it cannot be found. Why can't it accept the fact that it has gone?

Check the list of login items for your account in the Accounts pane of System Preferences.
(58174)

Similar Messages

  • I have a mid-2010 27" Quad Core i5 iMac running 10.8.3.  Startup disk recognizes the primary hard drive as a startup volume but will not boot from it.  Have tried zapping PRAM, ran disk utility.  No errors reported  Any thoughts?

    I have a mid-2010 27" Quad Core i5 iMac running 10.8.3.  Startup disk recognizes the primary hard drive as a startup volume but will not boot from it.  Have tried zapping PRAM, ran disk utility.  No errors reported  Any thoughts?

    My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

  • "Original file not found" error after copying from removable hard drive

    ok, I have all my itunes library on a removable hard drive, and I want to copy it all to my new computer. so, I plugged the hard drive in, copied all the files into itunes, and when I played one of them, it worked. then, I tried to play it again, but an error message came up saying "The song 'Re-hash'could not be used because the original file could not be found. Would you like tyo locate it?" and I clicked 'Yes'. then a browser came up, where i could select either the files itunes music, itunes library, or itunes music library. none of them work. help please?

    This worked although it was very clumsy (we had almost 3,000 files that had to be deleted and redownloaded. I could not figure out a way to sort all of the 'exclamation points' together so it took an hour or so to scan through the entire library list and delete each file individually and/or in small groups.) The download was very straight forward. In my experience (with iTunes match turned on,) we did NOT loose our playcounts.
    Going through all those files I noticed several common themes that may have triggered the problem: 1) multiple artists, 2) special characters in the song title, artist and/or album name - particularly umlauts (we have quite a few german songs in our library.) 3) very long title, artist and/or album names.
    I hope that someone from Apple is aware of these issues and working on them....

  • Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel...

    I have done all the steps that I could find, and I am still having this issue...can someone help me please?
    Here is the diagnostics test I just ran as well. Not sure why it wont read my ipod either.
    Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
    Dell Inc. Inspiron 1525
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver Not Available
    CD Driver DLL Not Available
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00D5BEA809F38F28
    Current user is an administrator.
    The current local date and time is 2014-04-05 12:39:11.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {F45D6408-EDE8-4F4F-8BDF-AE815F918114}
    Description:            Dell Wireless 1505 Draft 802.11n WLAN Mini-Card
    IP Address:             192.168.0.16
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.0.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.0.1
    Lease Obtained:     Sat Apr 05 12:21:08 2014
    Lease Expires:       Sat Apr 05 13:21:08 2014
    DNS Servers:         68.105.28.12
                                    68.105.29.12
                                    68.105.28.11
    Adapter Name:        {8F15FB4D-2EE6-4690-A8E7-82ACBF7A4F1E}
    Description:            Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 17:00:00 1969
    Lease Expires:       Wed Dec 31 17:00:00 1969
    DNS Servers:        
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2014-04-05 12:38:45.
    **** CD/DVD Drive Tests ****
    LowerFilters: PxHelp20 (2.0.0.0),
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
    **** Device Connectivity Tests ****
    iPodService 11.1.5.5 is currently running.
    iTunesHelper 11.1.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod touch (4th generation) running firmware version 6.0.1
    Serial Number:       CCQH8BRSDT77
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    CD Driver Not Available
    CD Driver DLL Not Available
    With that one, I'd start with solution 3 from the following document:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

  • CS3, mac, now opens my NAS drive upon startup of DW

    Just wiped my macbook clean, and did a brand new fresh
    install of OSX, and my new CS3 Design Premium. Now, when I open
    Dreamweaver, my NAS drive mounts ever time. Makes no sense. Why
    would this be?

    answered it myself. I went to PReferences, Preview in Browser
    tab...I deleted the 3 default browsers. Quit, restarted, and the
    NAS drive did not mount. Weird.

  • Mac looking for missing NAS drive upon startup

    Every time I reboot I get a message that an old NAS drive I used to have can't be found. How can I get my Mac to stop looking for that drive when it boots up?

    Check +System Preferences > Accounts > Login Items.+
    If the drive is shown there, highlight it and click the minus sign at the bottom.

  • Recurring Hard Drive Errors/Crashes After Replacing Repeatedly

    I've got a 2007 2GHz Macbook. I've been having repeated hard drive errors for the past few months. First the original hard drive went 100% dead. I replaced it with a Hitachi 350 Gig. After repeated serious hard drive crashes and reformats, I replaced it again with a brand new Western Digital 350 Gig hard drive. However, I am having continued problems with this one now, Invalid Extent entries every couple days, and major errors if I don't run disk utility every other day.
    This is leading me to believe that the issue isn't related to the hard drive since I've had similar problems three times in a row. Has anybody else encountered this? Could the problem be elsewhere?

    +I'm assuming that's a bad ram module, am I correct?+
    Perhaps, but I'm sorry to report there is much uncertainty about this. See the search of these boards I've added at the bottom, and refer to each listing and its resolution (if reported).
    There is usually a "Details" section of the Apple Hardware Test report about the memory - did you see that section of the results?
    If not seen, or if it was not reported, open the utility "System Profiler" and look at the "Diagnostics" section to see general results of that last AHT which you ran, and also you should see there the latest results of the "Power On Self-Test" that runs each time a Mac starts up. The normal "Result" for both lines reads: "Passed"
    Also check the "Memory" section of System Profiler to see the size, type, speed and "Status" of each individual memory module - your MacBook should have two modules in it, and the "Status" report for each should be "OK"
    If your Mac is not covered by AppleCare, it's probably best to use a process of elimination to find the source of the problem.
    Are you using your MacBook without an external keyboard and mouse? Those might possibly be the cause of a problem, if connected.
    As long as you have the original grey-label Install Disc in the optical drive, your MacBook will startup without a hard drive inside, as the Install Disc contains all the operating instructions that are necessary for the MacBook to operate the Install Disc and everything on it.
    It is easy to remove the internal hard drive to eliminate a potential problem source. If corruption of the hard drive is a repeated issue, it would be best to eliminate this hard drive from the mix for testing purposes.
    Just as important, as long as you have the original grey-label Install Disc that contains the AHT, the MacBook will startup to the Apple Hardware Test by pressing and holding the d key, again without a hard drive installed.
    It is very easy to remove RAM modules from a MacBook for visual inspection to see what markings are on the labels as to size, type and speed. Verify that System Profiler is reporting the same info as is marked on the labels.
    Assuming everything is as it should be, replace one module, close up the Mac, and after starting up to the Install Disc, check what the utility "System Profiler" is showing in the "Memory" section of its limited System Profiler. If the Mac starts up cleanly and System Profiler reads "OK" move that module to the other memory slot and same procedure.
    If the Mac again starts up cleanly to the Install Disc and System Profiler again reads "OK" next startup from and run the Apple Hardware Test with only that one module to see if it gets a clean bill of health.
    If it's ok, then remove that module and set it aside as being a tentatively "known good" module.
    Repeat all on the second module by it's self. At this point, you should probably have learned which module is bad - however, if not, go through it all again with both modules installed.
    Hopefully by the end, you will have determined a resolution that doesn't cost an arm and a leg to correct, such as replacing the logic board. Good luck with it:)
    Message was edited by: myhighway
    http://discussions.apple.com/search.jspa?threadID=&q=4MEM%2F4%2F40000000&objID=& dateRange=all&userID=&numResults=30&rankBy=10001

  • Front Row problems with NAS drive (2 of them)

    OK... having 2 problems with Front Row...
    Background
    First, I should say I'm new to Mac OS X, had early Macs, but went PC a long time ago.
    I burned all of my music from CDs (I own) on my WinXP box, then copied them over to a NAS drive for easy access between computers.
    The NAS is an Infrant ReadyNAS. The drive is shared on my network. The keychain app has the password information to the share. Though I should note, it doesn't matter if I remove the password from the share.
    The ReadyNAS has a nice feature whereas it will act as an iTunes server, this is enabled. I do not have AFP or NFS enabled on the NAS since I regularly access the drive on WinXP machines. All access is SMB/CIFS.
    I mounted the drive and created a link between the iTunes home folder and the network share. Thus, iTunes automatically mounts the share when started and seems to be comfortable that the files are accessible.
    Everything works fine in iTunes.
    Not so in Front Row.
    Problem #1
    Front Row will not read the "Shared Music." When I go this route in Front Row, it finds the NAS iTunes Music Server, but insists on being given a password to access the "Share." Of course, you can't enter a password.
    Again, everything works just fine in iTunes. It shows the server fine under "Shared," and immediately brings up all music and plays it readily.
    Just doesn't work in Front Row.
    Problem #2
    Front Row stopped auto-mounting the NAS share which is linked to the iTunes music folder. iTunes will mount it, if it is not mounted already when it first is asked to play a song. Up until this morning, Front Row would automount it too. This AM, after getting the Apple security update, Front Row would not automount the share. Note, if I automount the share manually, or go to iTunes (which properly automounts) before launching Front Row everything works fine from Front Row.
    It took me a second to figure this out, as Front Row's terribly missleading error message is, you are not authorized to play this song - authorize it (well, that is the point of the wordy message). Of course, this confused me, since these are not iTunes store songs and of course, this worked fine yesterday.
    Anyway, what is really happening, (I surmise) is it is not automounting the share and cannot read the song, and seemingly defaulted to the assumption it is a DRM problem.
    I have to say, this is one out of the old Microsoft handbook. Missleading error messages and broken functionality from (it would seem) rushed out security updates.
    I'm gonna have to tip my hat... some of those Microsoft developers that made the move from Redmond to Cupertino brought their game with them!
    LOL
    Anyway... anyone that can offer a hand would make my wife very happy. She likes Front Row... and now she has to start iTunes to make Front Row work. Sheesh.
    Thanks in advance for the help.
    iMac   Mac OS X (10.4.8)   Nah

    Hi,
    same thing here: I have 3 LCD-screens (30,26,20 Apple Displays) on two graphic-cards (ATI X1900XT, NVDIA7300GT). Front Row does not display any pictures or movies. Menus work like they should, Music also plays fine, but images are not shown. It only shows a white screen on the main screen (30") and the other two are dimmed to black. If i type ESC i get back to the menus...
    Any hint? Regards - Peter

  • Error on startup QuickTime

    Error on startup QuickTime and iTunes: (Windows XP Pro SP2)
    EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.4.1.14 P3 : 47a28143
    P4 : QuickTimePlayer.exe P5 : 7.4.1.14 P6 : 47a28143 P7 : 0000130d
    P8 : c0000409 P9 : 00000000

    What worked for me w/ the 2096 error:
    After removing every trace of itunes & QT, I installed QT 7.2 and made sure QT worked.
    I installed a Feb version of itunes (7.6.1.9) because I was not willing to waste any more time. **Make sure that you deselect the 3rd checkbox that says it will update other Apple software (incl QT). That was the mistake made over and over and over (and over)!
    Now that my ipod is charged, I may try to install the newest itunes as long as I don't let QT update. I don't use QT so I don't care if I'm using a 2007 version.

  • Cannot delete file on NAS Drive

    Hello,
    I was creating a backup of the program VLC on my NAS drive. When copying the file to the drive, it gave an error (which I now cannot recall completely... something about cannot copy certain files). When I went to try and delete the corrupted file, it gave me error: "the operation cannot be completed because the item "lib" is in use". I've tried a lot to delete:
    -restart computer/NAS drive
    -try to delete on another MAC
    -try to delete on Windows
    -hold option delete, ****, command, etc.
    Nothing seems to work. How can I delete this file? Thanks!

    What your going to need to do is c boot and install OS X (10.6) from the disk, onto a blank external drive (format the drive first in Disk Utility: GUID OS X Extended (J))
    Once 10.6 is installed, hold the option key and boot from the 10.6 external drive, go through setup with your same user name, and Software Update to 10.6.8
    Then download and install DataRescue  ($99) onto the external 10.6 drive and attach another blank external GUID OS X extended formatted drive and run DataRescue to recover your files to that drive. There will be a lot.
    Data Rescue will read the 1's and 0's of the files themselves regardless of what your partition map says, before they are overwritten.
    After that's done, access the second external drive and pick though the files to recover.
    Once you have gotten all your data, you need to install all your third party programs on the external drive from original sources and update. Then move your files you've recovered to it.
    Once that' is all done, erase one drive and download Winclone, and clone the Bootcamp Windows to the empty drive.
    Then use Disk Utility to Erase with Zero the entire internal drive of all partitions and everything. (select the drive makers name and size on the far left) Format GUID OS x Extended Journaled like always.
    Use Carbon Copy Cloner to clone the 10.6.8 external drive to the internal drive, disconnect the external drive and boot from the internal drive and then install Lion on the internal drive. You can hold option key, click on Purchases to download Lion again.
    Use Bootcamp to set up Windows partition, then follow Winclones directions to clone Windows back into the Bootcamp partition.

  • Getting and fsck error on startup about /bin/plymouth

    Hello,
    Yesterday I was rebooting my laptop when this happened, during the booting up there was an usual filesystem check and the it gave me an error and asked me to enter my root password for maintenance or press ctrl+D to continue I just continued to the DM and did run
    journalctl -xb
    I run openbox with compton and conky and basic apps I do not have KDE installed although I did try installing kde5 but  was unable to install completely due to some depenecides not installing.
    this is the output:
    -- Logs begin at Mon 2014-06-30 10:27:20 IST, end at Mon 2014-07-28 07:02:38 IST. --
    Jul 28 06:47:43 sentinel systemd-journal[118]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.7M free of 491.9M available → current limit 49.8M).
    Jul 28 06:47:43 sentinel systemd-journal[118]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.7M free of 491.9M available → current limit 49.8M).
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys cpuset
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys cpu
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys cpuacct
    Jul 28 06:47:43 sentinel kernel: Linux version 3.14.4-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 20140507 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 13 16:44:54 CEST 2014
    Jul 28 06:47:43 sentinel kernel: e820: BIOS-provided physical RAM map:
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x0000000000100000-0x000000003f6cffff] usable
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x000000003f6d0000-0x000000003f6e2fff] ACPI NVS
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x000000003f6e3000-0x000000003fffffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    Jul 28 06:47:43 sentinel kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    Jul 28 06:47:43 sentinel kernel: SMBIOS 2.4 present.
    Jul 28 06:47:43 sentinel kernel: DMI: LENOVO LENOVO3000 Y410 /IGT30, BIOS 05CN39WW(V1.10) 08/29/2007
    Jul 28 06:47:43 sentinel kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Jul 28 06:47:43 sentinel kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Jul 28 06:47:43 sentinel kernel: e820: last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
    Jul 28 06:47:43 sentinel kernel: MTRR default type: uncachable
    Jul 28 06:47:43 sentinel kernel: MTRR fixed ranges enabled:
    Jul 28 06:47:43 sentinel kernel: 00000-9FFFF write-back
    Jul 28 06:47:43 sentinel kernel: A0000-BFFFF uncachable
    Jul 28 06:47:43 sentinel kernel: C0000-FFFFF write-protect
    Jul 28 06:47:43 sentinel kernel: MTRR variable ranges enabled:
    Jul 28 06:47:43 sentinel kernel: 0 base 000000000 mask FC0000000 write-back
    Jul 28 06:47:43 sentinel kernel: 1 base 03F700000 mask FFFF00000 uncachable
    Jul 28 06:47:43 sentinel kernel: 2 base 03F800000 mask FFF800000 uncachable
    Jul 28 06:47:43 sentinel kernel: 3 disabled
    Jul 28 06:47:43 sentinel kernel: 4 disabled
    Jul 28 06:47:43 sentinel kernel: 5 disabled
    Jul 28 06:47:43 sentinel kernel: 6 disabled
    Jul 28 06:47:43 sentinel kernel: 7 disabled
    Jul 28 06:47:43 sentinel kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jul 28 06:47:43 sentinel kernel: found SMP MP-table at [mem 0x000f70d0-0x000f70df] mapped at [c00f70d0]
    Jul 28 06:47:43 sentinel kernel: Scanning 1 areas for low memory corruption
    Jul 28 06:47:43 sentinel kernel: initial memory mapped: [mem 0x00000000-0x01bfffff]
    Jul 28 06:47:43 sentinel kernel: Base memory trampoline at [c009b000] 9b000 size 16384
    Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Jul 28 06:47:43 sentinel kernel: [mem 0x00000000-0x000fffff] page 4k
    Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x37000000-0x373fffff]
    Jul 28 06:47:43 sentinel kernel: [mem 0x37000000-0x373fffff] page 2M
    Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x30000000-0x36ffffff]
    Jul 28 06:47:43 sentinel kernel: [mem 0x30000000-0x36ffffff] page 2M
    Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x00100000-0x2fffffff]
    Jul 28 06:47:43 sentinel kernel: [mem 0x00100000-0x003fffff] page 4k
    Jul 28 06:47:43 sentinel kernel: [mem 0x00400000-0x2fffffff] page 2M
    Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x37400000-0x377fdfff]
    Jul 28 06:47:43 sentinel kernel: [mem 0x37400000-0x377fdfff] page 4k
    Jul 28 06:47:43 sentinel kernel: BRK [0x01798000, 0x01798fff] PGTABLE
    Jul 28 06:47:43 sentinel kernel: RAMDISK: [mem 0x37958000-0x37ca3fff]
    Jul 28 06:47:43 sentinel kernel: Allocated new RAMDISK: [mem 0x374b2000-0x377fda97]
    Jul 28 06:47:43 sentinel kernel: Move RAMDISK from [mem 0x37958000-0x37ca3a97] to [mem 0x374b2000-0x377fda97]
    Jul 28 06:47:43 sentinel kernel: ACPI: RSDP 000f7050 000024 (v02 LENOVO)
    Jul 28 06:47:43 sentinel kernel: ACPI: XSDT 3f6d7561 00008C (v01 LENOVO CB-01 06040000 LTP 00000000)
    Jul 28 06:47:43 sentinel kernel: ACPI: FACP 3f6dfc3a 0000F4 (v03 LENOVO CB-01 06040000 ALAN 00000001)
    Jul 28 06:47:43 sentinel kernel: ACPI: DSDT 3f6d92a6 006920 (v02 LENOVO CB-01 06040000 INTL 20060608)
    Jul 28 06:47:43 sentinel kernel: ACPI: FACS 3f6e2fc0 000040
    Jul 28 06:47:43 sentinel kernel: ACPI: HPET 3f6dfd2e 000038 (v01 LENOVO CB-01 06040000 LOHR 0000005A)
    Jul 28 06:47:43 sentinel kernel: ACPI: MCFG 3f6dfd66 00003C (v01 LENOVO CB-01 06040000 LOHR 0000005A)
    Jul 28 06:47:43 sentinel kernel: ACPI: TCPA 3f6dfda2 000032 (v01 LENOVO CB-01 06040000 LOHR 0000005A)
    Jul 28 06:47:43 sentinel kernel: ACPI: TMOR 3f6dfdd4 000026 (v01 LENOVO CB-01 06040000 PTL 00000003)
    Jul 28 06:47:43 sentinel kernel: ACPI: SLIC 3f6dfdfa 000176 (v01 LENOVO CB-01 06040000 TBD 00000001)
    Jul 28 06:47:43 sentinel kernel: ACPI: APIC 3f6dff70 000068 (v01 LENOVO CB-01 06040000 LTP 00000000)
    Jul 28 06:47:43 sentinel kernel: ACPI: BOOT 3f6dffd8 000028 (v01 LENOVO CB-01 06040000 LTP 00000001)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d8c57 00064F (v01 SataRe SataPri 00001000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d85c5 000692 (v01 SataRe SataSec 00001000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d7b79 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d7ad3 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d75ed 0004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Local APIC address 0xfee00000
    Jul 28 06:47:43 sentinel kernel: 126MB HIGHMEM available.
    Jul 28 06:47:43 sentinel kernel: 887MB LOWMEM available.
    Jul 28 06:47:43 sentinel kernel: mapped low ram: 0 - 377fe000
    Jul 28 06:47:43 sentinel kernel: low ram: 0 - 377fe000
    Jul 28 06:47:43 sentinel kernel: BRK [0x01799000, 0x01799fff] PGTABLE
    Jul 28 06:47:43 sentinel kernel: Zone ranges:
    Jul 28 06:47:43 sentinel kernel: DMA [mem 0x00001000-0x00ffffff]
    Jul 28 06:47:43 sentinel kernel: Normal [mem 0x01000000-0x377fdfff]
    Jul 28 06:47:43 sentinel kernel: HighMem [mem 0x377fe000-0x3f6cffff]
    Jul 28 06:47:43 sentinel kernel: Movable zone start for each node
    Jul 28 06:47:43 sentinel kernel: Early memory node ranges
    Jul 28 06:47:43 sentinel kernel: node 0: [mem 0x00001000-0x0009efff]
    Jul 28 06:47:43 sentinel kernel: node 0: [mem 0x00100000-0x3f6cffff]
    Jul 28 06:47:43 sentinel kernel: On node 0 totalpages: 259694
    Jul 28 06:47:43 sentinel kernel: free_area_init_node: node 0, pgdat c15fc600, node_mem_map f6cc2020
    Jul 28 06:47:43 sentinel kernel: DMA zone: 32 pages used for memmap
    Jul 28 06:47:43 sentinel kernel: DMA zone: 0 pages reserved
    Jul 28 06:47:43 sentinel kernel: DMA zone: 3998 pages, LIFO batch:0
    Jul 28 06:47:43 sentinel kernel: Normal zone: 1744 pages used for memmap
    Jul 28 06:47:43 sentinel kernel: Normal zone: 223230 pages, LIFO batch:31
    Jul 28 06:47:43 sentinel kernel: HighMem zone: 254 pages used for memmap
    Jul 28 06:47:43 sentinel kernel: HighMem zone: 32466 pages, LIFO batch:7
    Jul 28 06:47:43 sentinel kernel: Using APIC driver default
    Jul 28 06:47:43 sentinel kernel: ACPI: PM-Timer IO Port: 0x1008
    Jul 28 06:47:43 sentinel kernel: ACPI: Local APIC address 0xfee00000
    Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Jul 28 06:47:43 sentinel kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Jul 28 06:47:43 sentinel kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Jul 28 06:47:43 sentinel kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    Jul 28 06:47:43 sentinel kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jul 28 06:47:43 sentinel kernel: ACPI: IRQ0 used by override.
    Jul 28 06:47:43 sentinel kernel: ACPI: IRQ2 used by override.
    Jul 28 06:47:43 sentinel kernel: ACPI: IRQ9 used by override.
    Jul 28 06:47:43 sentinel kernel: Using ACPI (MADT) for SMP configuration information
    Jul 28 06:47:43 sentinel kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Jul 28 06:47:43 sentinel kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    Jul 28 06:47:43 sentinel kernel: nr_irqs_gsi: 40
    Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
    Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
    Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
    Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
    Jul 28 06:47:43 sentinel kernel: e820: [mem 0x40000000-0xdfffffff] available for PCI devices
    Jul 28 06:47:43 sentinel kernel: Booting paravirtualized kernel on bare hardware
    Jul 28 06:47:43 sentinel kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    Jul 28 06:47:43 sentinel kernel: PERCPU: Embedded 14 pages/cpu @f6ca0000 s33792 r0 d23552 u57344
    Jul 28 06:47:43 sentinel kernel: pcpu-alloc: s33792 r0 d23552 u57344 alloc=14*4096
    Jul 28 06:47:43 sentinel kernel: pcpu-alloc: [0] 0 [0] 1
    Jul 28 06:47:43 sentinel kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257918
    Jul 28 06:47:43 sentinel kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=45e3c622-e8c8-40b6-be7c-0c847fe91502 rw quiet
    Jul 28 06:47:43 sentinel kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
    Jul 28 06:47:43 sentinel kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Jul 28 06:47:43 sentinel kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Jul 28 06:47:43 sentinel kernel: Initializing CPU#0
    Jul 28 06:47:43 sentinel kernel: allocated 2078328 bytes of page_cgroup
    Jul 28 06:47:43 sentinel kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jul 28 06:47:43 sentinel kernel: Initializing HighMem for node 0 (000377fe:0003f6d0)
    Jul 28 06:47:43 sentinel kernel: Initializing Movable for node 0 (00000000:00000000)
    Jul 28 06:47:43 sentinel kernel: Memory: 1016448K/1038776K available (4445K kernel code, 470K rwdata, 1280K rodata, 568K init, 956K bss, 22328K reserved, 129864K highmem)
    Jul 28 06:47:43 sentinel kernel: virtual kernel memory layout:
    fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc160f000 - 0xc169d000 ( 568 kB)
    .data : 0xc1457b12 - 0xc160eb40 (1756 kB)
    .text : 0xc1000000 - 0xc1457b12 (4446 kB)
    Jul 28 06:47:43 sentinel kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
    Jul 28 06:47:43 sentinel kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Jul 28 06:47:43 sentinel kernel: Preemptible hierarchical RCU implementation.
    Jul 28 06:47:43 sentinel kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jul 28 06:47:43 sentinel kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jul 28 06:47:43 sentinel kernel: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    Jul 28 06:47:43 sentinel kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    Jul 28 06:47:43 sentinel kernel: NR_IRQS:2304 nr_irqs:512 16
    Jul 28 06:47:43 sentinel kernel: CPU 0 irqstacks, hard=f6408000 soft=f640a000
    Jul 28 06:47:43 sentinel kernel: Console: colour dummy device 80x25
    Jul 28 06:47:43 sentinel kernel: console [tty0] enabled
    Jul 28 06:47:43 sentinel kernel: hpet clockevent registered
    Jul 28 06:47:43 sentinel kernel: tsc: Fast TSC calibration using PIT
    Jul 28 06:47:43 sentinel kernel: tsc: Detected 1463.025 MHz processor
    Jul 28 06:47:43 sentinel kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 2927.96 BogoMIPS (lpj=4876750)
    Jul 28 06:47:43 sentinel kernel: pid_max: default: 32768 minimum: 301
    Jul 28 06:47:43 sentinel kernel: ACPI: Core revision 20131218
    Jul 28 06:47:43 sentinel kernel: ACPI: All ACPI Tables successfully acquired
    Jul 28 06:47:43 sentinel kernel: Security Framework initialized
    Jul 28 06:47:43 sentinel kernel: Yama: becoming mindful.
    Jul 28 06:47:43 sentinel kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    Jul 28 06:47:43 sentinel kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys memory
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys devices
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys freezer
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys net_cls
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys blkio
    Jul 28 06:47:43 sentinel kernel: CPU: Physical Processor ID: 0
    Jul 28 06:47:43 sentinel kernel: CPU: Processor Core ID: 0
    Jul 28 06:47:43 sentinel kernel: mce: CPU supports 6 MCE banks
    Jul 28 06:47:43 sentinel kernel: CPU0: Thermal monitoring handled by SMI
    Jul 28 06:47:43 sentinel kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
    tlb_flushall_shift: -1
    Jul 28 06:47:43 sentinel kernel: Freeing SMP alternatives memory: 16K (c169d000 - c16a1000)
    Jul 28 06:47:43 sentinel kernel: ftrace: allocating 18913 entries in 37 pages
    Jul 28 06:47:43 sentinel kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
    Jul 28 06:47:43 sentinel kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jul 28 06:47:43 sentinel kernel: smpboot: CPU0: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz (fam: 06, model: 0f, stepping: 0d)
    Jul 28 06:47:43 sentinel kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    Jul 28 06:47:43 sentinel kernel: perf_event_intel: PEBS disabled due to CPU errata
    Jul 28 06:47:43 sentinel kernel: ... version: 2
    Jul 28 06:47:43 sentinel kernel: ... bit width: 40
    Jul 28 06:47:43 sentinel kernel: ... generic registers: 2
    Jul 28 06:47:43 sentinel kernel: ... value mask: 000000ffffffffff
    Jul 28 06:47:43 sentinel kernel: ... max period: 000000007fffffff
    Jul 28 06:47:43 sentinel kernel: ... fixed-purpose events: 3
    Jul 28 06:47:43 sentinel kernel: ... event mask: 0000000700000003
    Jul 28 06:47:43 sentinel kernel: CPU 1 irqstacks, hard=f64cc000 soft=f64ce000
    Jul 28 06:47:43 sentinel kernel: x86: Booting SMP configuration:
    Jul 28 06:47:43 sentinel kernel: .... node #0, CPUs: #1
    Jul 28 06:47:43 sentinel kernel: Initializing CPU#1
    Jul 28 06:47:43 sentinel kernel: CPU1: Thermal monitoring handled by SMI
    Jul 28 06:47:43 sentinel kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Jul 28 06:47:43 sentinel kernel: x86: Booted up 1 node, 2 CPUs
    Jul 28 06:47:43 sentinel kernel: smpboot: Total of 2 processors activated (5854.93 BogoMIPS)
    Jul 28 06:47:43 sentinel kernel: devtmpfs: initialized
    Jul 28 06:47:43 sentinel kernel: PM: Registering ACPI NVS region [mem 0x3f6d0000-0x3f6e2fff] (77824 bytes)
    Jul 28 06:47:43 sentinel kernel: pinctrl core: initialized pinctrl subsystem
    Jul 28 06:47:43 sentinel kernel: RTC time: 1:17:37, date: 07/28/14
    Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 16
    Jul 28 06:47:43 sentinel kernel: cpuidle: using governor ladder
    Jul 28 06:47:43 sentinel kernel: cpuidle: using governor menu
    Jul 28 06:47:43 sentinel kernel: ACPI: bus type PCI registered
    Jul 28 06:47:43 sentinel kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Jul 28 06:47:43 sentinel kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jul 28 06:47:43 sentinel kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    Jul 28 06:47:43 sentinel kernel: PCI: Using MMCONFIG for extended config space
    Jul 28 06:47:43 sentinel kernel: PCI: Using configuration type 1 for base access
    Jul 28 06:47:43 sentinel kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Jul 28 06:47:43 sentinel kernel: mtrr: probably your BIOS does not setup all CPUs.
    Jul 28 06:47:43 sentinel kernel: mtrr: corrected configuration.
    Jul 28 06:47:43 sentinel kernel: bio: create slab <bio-0> at 0
    Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(Module Device)
    Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(Processor Device)
    Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jul 28 06:47:43 sentinel kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d8307 0001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 0001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d7dd8 0004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 0004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d84fd 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d8282 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Interpreter enabled
    Jul 28 06:47:43 sentinel kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    Jul 28 06:47:43 sentinel kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    Jul 28 06:47:43 sentinel kernel: ACPI: (supports S0 S3 S4 S5)
    Jul 28 06:47:43 sentinel kernel: ACPI: Using IOAPIC for interrupt routing
    Jul 28 06:47:43 sentinel kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    Jul 28 06:47:43 sentinel kernel: ACPI: No dock devices found.
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
    Jul 28 06:47:43 sentinel kernel: PCI: root bus 00: using default resources
    Jul 28 06:47:43 sentinel kernel: PCI host bridge to bus 0000:00
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf8000000-0xf80fffff 64bit]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.1: reg 0x10: [mem 0xf8100000-0xf81fffff 64bit]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.1: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: reg 0x10: [mem 0xf8504000-0xf85043ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xf8300000-0xf8303fff 64bit]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xf8504400-0xf85047ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: [8086:2828] type 00 class 0x010180
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x24: [io 0x18d0-0x18df]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: PME# supported from D3hot
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: [8086:4222] type 00 class 0x028000
    Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: reg 0x10: [mem 0xf0000000-0xf0000fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: PCI bridge to [bus 04]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: acpiphp: Slot [1] registered
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: PCI bridge to [bus 05]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: [14e4:1713] type 00 class 0x020000
    Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: reg 0x10: [mem 0xb8000000-0xb800ffff 64bit]
    Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: PME# supported from D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: PCI bridge to [bus 06]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xb8000000-0xbbffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: [1180:0832] type 00 class 0x0c0010
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: MMC cards are now supported by standard SDHCI controller
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: reg 0x10: [mem 0xf8200000-0xf82007ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: supports D1 D2
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: [1180:0822] type 00 class 0x080500
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: reg 0x10: [mem 0xf8200800-0xf82008ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: supports D1 D2
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: [1180:0592] type 00 class 0x088000
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: reg 0x10: [mem 0xf8201000-0xf82010ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: supports D1 D2
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: PME# supported from D0 D1 D2 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: [1180:0852] type 00 class 0x088000
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: reg 0x10: [mem 0xf8201400-0xf82014ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: supports D1 D2
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: PME# supported from D0 D1 D2 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [mem 0xf8200000-0xf82fffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: on NUMA node 0
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Jul 28 06:47:43 sentinel kernel: ACPI: Enabled 4 GPEs in block 00 to 1F
    Jul 28 06:47:43 sentinel kernel: ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    Jul 28 06:47:43 sentinel kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    Jul 28 06:47:43 sentinel kernel: vgaarb: loaded
    Jul 28 06:47:43 sentinel kernel: vgaarb: bridge control possible 0000:00:02.0
    Jul 28 06:47:43 sentinel kernel: PCI: Using ACPI for IRQ routing
    Jul 28 06:47:43 sentinel kernel: PCI: pci_cache_line_size set to 64 bytes
    Jul 28 06:47:43 sentinel kernel: e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    Jul 28 06:47:43 sentinel kernel: e820: reserve RAM buffer [mem 0x3f6d0000-0x3fffffff]
    Jul 28 06:47:43 sentinel kernel: NetLabel: Initializing
    Jul 28 06:47:43 sentinel kernel: NetLabel: domain hash size = 128
    Jul 28 06:47:43 sentinel kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jul 28 06:47:43 sentinel kernel: NetLabel: unlabeled traffic allowed by default
    Jul 28 06:47:43 sentinel kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Jul 28 06:47:43 sentinel kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Jul 28 06:47:43 sentinel kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Jul 28 06:47:43 sentinel kernel: Switched to clocksource hpet
    Jul 28 06:47:43 sentinel kernel: pnp: PnP ACPI init
    Jul 28 06:47:43 sentinel kernel: ACPI: bus type PNP registered
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:01: [dma 4]
    Jul 28 06:47:43 sentinel kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    Jul 28 06:47:43 sentinel kernel: system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x0680-0x069f] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x0800-0x080f] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x1000-0x107f] could not be reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x1180-0x11bf] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0xfe00] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0xff00-0xff7f] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
    Jul 28 06:47:43 sentinel kernel: pnp: PnP ACPI: found 9 devices
    Jul 28 06:47:43 sentinel kernel: ACPI: bus type PNP unregistered
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: BAR 0: assigned [mem 0x40000000-0x400000ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: PCI bridge to [bus 04]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: PCI bridge to [bus 05]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: PCI bridge to [bus 06]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xb8000000-0xbbffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: PCI bridge to [bus 08]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [mem 0xf8200000-0xf82fffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf7ffffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:05: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:06: resource 1 [mem 0xb8000000-0xbbffffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:06: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:08: resource 1 [mem 0xf8200000-0xf82fffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:08: resource 5 [mem 0x00000000-0xffffffff]
    Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 2
    Jul 28 06:47:43 sentinel kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    Jul 28 06:47:43 sentinel kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    Jul 28 06:47:43 sentinel kernel: TCP: Hash tables configured (established 8192 bind 8192)
    Jul 28 06:47:43 sentinel kernel: TCP: reno registered
    Jul 28 06:47:43 sentinel kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
    Jul 28 06:47:43 sentinel kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 1
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: Boot video device
    Jul 28 06:47:43 sentinel kernel: PCI: CLS 64 bytes, default 64
    Jul 28 06:47:43 sentinel kernel: Unpacking initramfs...
    Jul 28 06:47:43 sentinel kernel: Freeing initrd memory: 3376K (f74b2000 - f77fe000)
    Jul 28 06:47:43 sentinel kernel: Simple Boot Flag at 0x37 set to 0x1
    Jul 28 06:47:43 sentinel kernel: apm: BIOS not found.
    Jul 28 06:47:43 sentinel kernel: Scanning for low memory corruption every 60 seconds
    Jul 28 06:47:43 sentinel kernel: futex hash table entries: 512 (order: 3, 32768 bytes)
    Jul 28 06:47:43 sentinel kernel: bounce pool size: 64 pages
    Jul 28 06:47:43 sentinel kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
    Jul 28 06:47:43 sentinel kernel: zbud: loaded
    Jul 28 06:47:43 sentinel kernel: VFS: Disk quotas dquot_6.5.2
    Jul 28 06:47:43 sentinel kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Jul 28 06:47:43 sentinel kernel: msgmni has been set to 1738
    Jul 28 06:47:43 sentinel kernel: Key type big_key registered
    Jul 28 06:47:43 sentinel kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jul 28 06:47:43 sentinel kernel: io scheduler noop registered
    Jul 28 06:47:43 sentinel kernel: io scheduler deadline registered
    Jul 28 06:47:43 sentinel kernel: io scheduler cfq registered (default)
    Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    Jul 28 06:47:43 sentinel kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Jul 28 06:47:43 sentinel kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Jul 28 06:47:43 sentinel kernel: vesafb: mode is 1280x800x32, linelength=5120, pages=0
    Jul 28 06:47:43 sentinel kernel: vesafb: scrolling: redraw
    Jul 28 06:47:43 sentinel kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Jul 28 06:47:43 sentinel kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 4032k, total 4032k
    Jul 28 06:47:43 sentinel kernel: Console: switching to colour frame buffer device 160x50
    Jul 28 06:47:43 sentinel kernel: fb0: VESA VGA frame buffer device
    Jul 28 06:47:43 sentinel kernel: intel_idle: does not run on family 6 model 15
    Jul 28 06:47:43 sentinel kernel: GHES: HEST is not enabled!
    Jul 28 06:47:43 sentinel kernel: isapnp: Scanning for PnP cards...
    Jul 28 06:47:43 sentinel kernel: isapnp: No Plug & Play device found
    Jul 28 06:47:43 sentinel kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: RTC can wake from S4
    Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    Jul 28 06:47:43 sentinel kernel: ledtrig-cpu: registered to indicate activity on CPUs
    Jul 28 06:47:43 sentinel kernel: TCP: cubic registered
    Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 10
    Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 17
    Jul 28 06:47:43 sentinel kernel: Using IPI No-Shortcut mode
    Jul 28 06:47:43 sentinel kernel: registered taskstats version 1
    Jul 28 06:47:43 sentinel kernel: Magic number: 6:931:256
    Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: setting system clock to 2014-07-28 01:17:37 UTC (1406510257)
    Jul 28 06:47:43 sentinel kernel: PM: Hibernation image not present or could not be loaded.
    Jul 28 06:47:43 sentinel kernel: Freeing unused kernel memory: 568K (c160f000 - c169d000)
    Jul 28 06:47:43 sentinel kernel: Write protecting the kernel text: 4448k
    Jul 28 06:47:43 sentinel kernel: Write protecting the kernel read-only data: 1284k
    Jul 28 06:47:43 sentinel kernel: random: systemd-tmpfile urandom read with 0 bits of entropy available
    Jul 28 06:47:43 sentinel systemd-udevd[47]: starting version 215
    Jul 28 06:47:43 sentinel kernel: ACPI: bus type USB registered
    Jul 28 06:47:43 sentinel kernel: usbcore: registered new interface driver usbfs
    Jul 28 06:47:43 sentinel kernel: usbcore: registered new interface driver hub
    Jul 28 06:47:43 sentinel kernel: usbcore: registered new device driver usb
    Jul 28 06:47:43 sentinel kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jul 28 06:47:43 sentinel kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: detected 2 ports
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
    Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Jul 28 06:47:43 sentinel kernel: ehci-pci: EHCI PCI platform driver
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: detected 2 ports
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
    Jul 28 06:47:43 sentinel kernel: SCSI subsystem initialized
    Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: debug port 1
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: irq 18, io mem 0xf8504000
    Jul 28 06:47:43 sentinel kernel: sdhci: Secure Digital Host Controller Interface driver
    Jul 28 06:47:43 sentinel kernel: sdhci: Copyright(c) Pierre Ossman
    Jul 28 06:47:43 sentinel kernel: sdhci-pci 0000:08:06.1: SDHCI controller found [1180:0822] (rev 22)
    Jul 28 06:47:43 sentinel kernel: sdhci-pci 0000:08:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Jul 28 06:47:43 sentinel kernel: sdhci-pci 0000:08:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Jul 28 06:47:43 sentinel kernel: mmc0: SDHCI controller on PCI [0000:08:06.1] using DMA
    Jul 28 06:47:43 sentinel kernel: libata version 3.00 loaded.
    Jul 28 06:47:43 sentinel kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jul 28 06:47:43 sentinel kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    Jul 28 06:47:43 sentinel kernel: hub 3-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 3-0:1.0: 4 ports detected
    Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: debug port 1
    Jul 28 06:47:43 sentinel kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8504400
    Jul 28 06:47:43 sentinel kernel: firewire_ohci 0000:08:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Jul 28 06:47:43 sentinel kernel: hub 4-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 4-0:1.0: 6 ports detected
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: detected 2 ports
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
    Jul 28 06:47:43 sentinel kernel: hub 5-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 5-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: detected 2 ports
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
    Jul 28 06:47:43 sentinel kernel: hub 6-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 6-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: detected 2 ports
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
    Jul 28 06:47:43 sentinel kernel: hub 7-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 7-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: ata_piix 0000:00:1f.2: version 2.13
    Jul 28 06:47:43 sentinel kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    Jul 28 06:47:43 sentinel kernel: scsi0 : ata_piix
    Jul 28 06:47:43 sentinel kernel: scsi1 : ata_piix
    Jul 28 06:47:43 sentinel kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
    Jul 28 06:47:43 sentinel kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
    Jul 28 06:47:43 sentinel kernel: usb 4-4: new high-speed USB device number 2 using ehci-pci
    Jul 28 06:47:43 sentinel kernel: ata2.00: ATAPI: MATSHITADVD-RAM UJ-85JS, FYX4, max UDMA/66
    Jul 28 06:47:43 sentinel kernel: ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
    Jul 28 06:47:43 sentinel kernel: ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Jul 28 06:47:43 sentinel kernel: ata2.00: configured for UDMA/66
    Jul 28 06:47:43 sentinel kernel: ata1.00: configured for UDMA/100
    Jul 28 06:47:43 sentinel kernel: scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0000 PQ: 0 ANSI: 5
    Jul 28 06:47:43 sentinel kernel: scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-85JS FYX4 PQ: 0 ANSI: 5
    Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jul 28 06:47:43 sentinel kernel: sda: sda1 sda2 sda3 sda4
    Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jul 28 06:47:43 sentinel kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    Jul 28 06:47:43 sentinel kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jul 28 06:47:43 sentinel kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jul 28 06:47:43 sentinel kernel: tsc: Refined TSC clocksource calibration: 1462.999 MHz
    Jul 28 06:47:43 sentinel kernel: firewire_core 0000:08:06.0: created device fw0: GUID 00023f79af40a4d3, S400
    Jul 28 06:47:43 sentinel kernel: Switched to clocksource tsc
    Jul 28 06:47:43 sentinel kernel: random: nonblocking pool is initialized
    Jul 28 06:47:43 sentinel kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    Jul 28 06:47:43 sentinel kernel: EXT4-fs (sda2): re-mounted. Opts: data=ordered
    Jul 28 06:47:43 sentinel systemd-journal[118]: Journal started
    -- Subject: The Journal has been started
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- The system journal process has been starting up, opened the journal
    -- files for writing and is now ready to process requests.
    Jul 28 06:47:43 sentinel systemd-udevd[141]: starting version 215
    Jul 28 06:47:44 sentinel kernel: Monitor-Mwait will be used to enter C-1 state
    Jul 28 06:47:44 sentinel kernel: Monitor-Mwait will be used to enter C-2 state
    Jul 28 06:47:44 sentinel kernel: Monitor-Mwait will be used to enter C-3 state
    Jul 28 06:47:44 sentinel kernel: tsc: Marking TSC unstable due to TSC halts in idle
    Jul 28 06:47:44 sentinel kernel: ACPI: acpi_idle registered with cpuidle
    Jul 28 06:47:44 sentinel kernel: Switched to clocksource hpet
    Jul 28 06:47:44 sentinel kernel: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    Jul 28 06:47:44 sentinel kernel: ACPI: Lid Switch [LID0]
    Jul 28 06:47:44 sentinel kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    Jul 28 06:47:44 sentinel kernel: ACPI: Power Button [PWRB]
    Jul 28 06:47:44 sentinel kernel: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    Jul 28 06:47:44 sentinel kernel: ACPI: Sleep Button [SLPB]
    Jul 28 06:47:44 sentinel kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    Jul 28 06:47:44 sentinel kernel: ACPI: Power Button [PWRF]
    Jul 28 06:47:44 sentinel kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Jul 28 06:47:44 sentinel kernel: wmi: Mapper loaded
    Jul 28 06:47:44 sentinel kernel: ACPI: Battery Slot [BAT1] (battery present)
    Jul 28 06:47:44 sentinel kernel: ACPI: AC Adapter [ACAD] (on-line)
    Jul 28 06:47:44 sentinel kernel: Linux agpgart interface v0.103
    Jul 28 06:47:44 sentinel kernel: ACPI Warning: SystemIO range 0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x0000107f (\PMIO) (20131218/utaddress-258)
    Jul 28 06:47:44 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jul 28 06:47:44 sentinel kernel: ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20131218/utaddress-258)
    Jul 28 06:47:44 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jul 28 06:47:44 sentinel kernel: ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20131218/utaddress-258)
    Jul 28 06:47:44 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jul 28 06:47:44 sentinel kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
    Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    Jul 28 06:47:45 sentinel kernel: ACPI: Invalid active0 threshold
    Jul 28 06:47:45 sentinel kernel: thermal LNXTHERM:00: registered as thermal_zone0
    Jul 28 06:47:45 sentinel kernel: ACPI: Thermal Zone [TZ00] (44 C)
    Jul 28 06:47:45 sentinel kernel: ACPI Warning: SystemIO range 0x00001c00-0x00001c1f conflicts with OpRegion 0x00001c00-0x00001c0f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
    Jul 28 06:47:45 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jul 28 06:47:45 sentinel kernel: [drm] Initialized drm 1.1.0 20060810
    Jul 28 06:47:45 sentinel kernel: ideapad_laptop: timeout in read_ec_cmd
    Jul 28 06:47:45 sentinel kernel: input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input6
    Jul 28 06:47:45 sentinel kernel: cfg80211: Calling CRDA to update world regulatory domain
    Jul 28 06:47:45 sentinel kernel: pps_core: LinuxPPS API ver. 1 registered
    Jul 28 06:47:45 sentinel kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    Jul 28 06:47:45 sentinel kernel: r852: driver loaded successfully
    Jul 28 06:47:45 sentinel kernel: PTP clock support registered
    Jul 28 06:47:45 sentinel kernel: [drm] Memory usable by graphics device = 512M
    Jul 28 06:47:45 sentinel kernel: checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
    Jul 28 06:47:45 sentinel kernel: fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    Jul 28 06:47:45 sentinel kernel: Console: switching to colour dummy device 80x25
    Jul 28 06:47:45 sentinel kernel: i915 0000:00:02.0: irq 44 for MSI/MSI-X
    Jul 28 06:47:45 sentinel kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    Jul 28 06:47:45 sentinel kernel: [drm] Driver supports precise vblank timestamp query.
    Jul 28 06:47:45 sentinel kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    Jul 28 06:47:45 sentinel kernel: [drm] initialized overlay support
    Jul 28 06:47:46 sentinel kernel: tg3.c:v3.136 (Jan 03, 2014)
    Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:98:bc:f2
    Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
    Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    Jul 28 06:47:46 sentinel kernel: iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
    Jul 28 06:47:46 sentinel kernel: iwl3945: Copyright(c) 2003-2011 Intel Corporation
    Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
    Jul 28 06:47:46 sentinel kernel: snd_hda_intel: unknown parameter 'vid' ignored
    Jul 28 06:47:46 sentinel kernel: snd_hda_intel: unknown parameter 'pid' ignored
    Jul 28 06:47:46 sentinel kernel: fbcon: inteldrmfb (fb0) is primary device
    Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
    Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
    Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: irq 45 for MSI/MSI-X
    Jul 28 06:47:46 sentinel kernel: r592: driver successfully loaded
    Jul 28 06:47:46 sentinel kernel: input: PC Speaker as /devices/platform/pcspkr/input/input7
    Jul 28 06:47:46 sentinel kernel: media: Linux media interface: v0.10
    Jul 28 06:47:46 sentinel kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
    Jul 28 06:47:46 sentinel kernel: microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
    Jul 28 06:47:46 sentinel kernel: microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
    Jul 28 06:47:46 sentinel kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Jul 28 06:47:46 sentinel kernel: Adding 2000088k swap on /dev/sda3. Priority:-1 extents:1 across:2000088k FS
    Jul 28 06:47:46 sentinel kernel: iTCO_vendor_support: vendor-support=0
    Jul 28 06:47:46 sentinel systemd-udevd[152]: renamed network interface wlan0 to wlp4s0
    Jul 28 06:47:46 sentinel kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    Jul 28 06:47:46 sentinel kernel: iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    Jul 28 06:47:46 sentinel kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Jul 28 06:47:46 sentinel kernel: Console: switching to colour frame buffer device 160x50
    Jul 28 06:47:46 sentinel kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    Jul 28 06:47:46 sentinel kernel: i915 0000:00:02.0: registered panic notifier
    Jul 28 06:47:46 sentinel kernel: Linux video capture interface: v2.00
    Jul 28 06:47:46 sentinel systemd-udevd[148]: renamed network interface eth0 to enp6s0
    Jul 28 06:47:46 sentinel kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    Jul 28 06:47:46 sentinel kernel: ideapad_laptop: timeout in write_ec_cmd
    Jul 28 06:47:46 sentinel kernel: acpi device:09: registered as cooling_device2
    Jul 28 06:47:46 sentinel kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
    Jul 28 06:47:46 sentinel kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    Jul 28 06:47:46 sentinel kernel: snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    Jul 28 06:47:47 sentinel kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
    Jul 28 06:47:47 sentinel kernel: uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b008)
    Jul 28 06:47:47 sentinel kernel: input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/input/input11
    Jul 28 06:47:47 sentinel kernel: usbcore: registered new interface driver uvcvideo
    Jul 28 06:47:47 sentinel kernel: USB Video Class driver (1.1.1)
    Jul 28 06:47:47 sentinel kernel: input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    Jul 28 06:47:47 sentinel kernel: input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    Jul 28 06:47:47 sentinel systemd-fsck[178]: /dev/sda4: recovering journal
    Jul 28 06:47:47 sentinel kernel: input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input12
    Jul 28 06:47:47 sentinel kernel: input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
    Jul 28 06:47:47 sentinel kernel: mousedev: PS/2 mouse device common for all mice
    Jul 28 06:47:47 sentinel kernel: usb 1-2: new full-speed USB device number 2 using uhci_hcd
    Jul 28 06:47:48 sentinel systemd-fsck[178]: /dev/sda4 contains a file system with errors, check forced.
    Jul 28 06:47:48 sentinel kernel: Bluetooth: Core ver 2.18
    Jul 28 06:47:48 sentinel kernel: NET: Registered protocol family 31
    Jul 28 06:47:48 sentinel kernel: Bluetooth: HCI device and connection manager initialized
    Jul 28 06:47:48 sentinel kernel: Bluetooth: HCI socket layer initialized
    Jul 28 06:47:48 sentinel kernel: Bluetooth: L2CAP socket layer initialized
    Jul 28 06:47:48 sentinel kernel: Bluetooth: SCO socket layer initialized
    Jul 28 06:47:48 sentinel kernel: usbcore: registered new interface driver btusb
    Jul 28 06:47:48 sentinel kernel: hda-codec: out of range cmd 1:a:100:fffffffe
    Jul 28 06:47:50 sentinel systemd-fsck[178]: /dev/sda4: Inode 2753367, i_blocks is 1552, should be 1536. FIXED.
    Jul 28 06:47:50 sentinel systemd-fsck[178]: /dev/sda4: Inodes that were part of a corrupted orphan linked list found.
    Jul 28 06:47:50 sentinel systemd-fsck[178]: /dev/sda4: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
    Jul 28 06:47:50 sentinel systemd-fsck[178]: (i.e., without -a or -p options)
    Jul 28 06:47:50 sentinel systemd-fsck[178]: fsck failed with error code 4.
    Jul 28 06:47:50 sentinel systemd-fsck[178]: Running request emergency.target/start/replace
    Jul 28 06:47:50 sentinel kernel: EXT4-fs (sda4): warning: mounting fs with errors, running e2fsck is recommended
    Jul 28 06:47:50 sentinel kernel: EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
    Jul 28 06:47:51 sentinel systemd-journal[118]: Permanent journal is using 520.1M (max allowed 2.8G, trying to leave 354.1M free of 18.5G available → current limit 2.8G).
    Jul 28 06:47:51 sentinel systemd-journal[118]: Time spent on flushing to /var is 509.727ms for 733 entries.
    Jul 28 06:47:50 sentinel systemd[203]: Failed at step EXEC spawning /bin/plymouth: No such file or directory
    -- Subject: Process /bin/plymouth could not be executed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- The process /bin/plymouth could not be executed and failed.
    -- The error number returned while executing this process is 2.
    Jul 28 06:48:05 sentinel dbus[241]: [system] Successfully activated service 'org.freedesktop.systemd1'
    Jul 28 06:48:05 sentinel systemd-logind[240]: New seat seat0.
    -- Subject: A new seat seat0 is now available
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/multiseat
    -- A new seat seat0 has been configured and is now available.
    Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event4 (Power Button)
    Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event7 (Video Bus)
    Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event2 (Power Button)
    Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event1 (Lid Switch)
    Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /

    I'm not a hardware person, but I doubt it can be repaired.
    You might put it in a USB enclosure and try to access the data from another computer. Some have had luck with this treatment.
    -Jerry

  • Regarding Artwork and managing of iTunes Movie files on a NAS Drive

    My Macbook hard drive was virtually full so like many other people in my situation I made space by moving my Movies and TV folders from iTunes media to a NAS networked hard drive connected to my network router at home.  That's great, freed up loads of space and when I'm home my iTunes wirelessly finds it and can even stream the content via my Apple TV.  My question now though is how do I add artwork to movie files that I have ripped from my DVD's?  I've been going into the info pane and adding artwork as I normally do and clicking ok, but then nothing changes.  It's as if iTunes cannot write the artwork image to the file on the NAS drive, or connect the thumbnail to it.
    This has led me to question how do I now add a new movie file to my iTunes if the folder is located on a NAS drive now.  I also normally add a movie file to my iTunes library and then amend it's metadata i.e. the video type (movie/TV Shows), add artwork etc.  My concern is that I'm not sure how to add more files and also once I do I cannot seem to amend the metadata.
    Does anyone have experience in this and can they explain how best to do it.

    I have a similar setup with an iMac and media library on a TC and can add some converted movies but not all and changes to metadata don't save.  Files aren't hidden somewhere in Home movies.  I thought it was a format issue so switched to m4v Apple format and found that i can add some to the library but not others.  Any that do add, don't take changes to the metadata - no error message, just doesn't process.  Interestingly, I recently upgrades from a Windows pc to the Mac and under Windows it worked perfectly!

  • Visual C++ runtime error on startup audition cs5.5 win8.1

    After reinstalling Audition cs5.5, I get a visual C++ runtime error at startup.  I have never had a problem before on a reinstallation.  I have tried uninstall and reinstall without any success.  Is their a version of Visual C++ that is needed here?  Is this an incompatibility problem with Win 8.1?  Has anyone else had this problem?  I haven't had any luck in the FAQ section.

    The only issues I've ever heard about involving this appear to have been caused by having too many versions of the run-time on a machine. I'm not entirely sure what the situation with software only running properly with the version it was intended to is, but apparently clearing out older versions (you can check this out and remove them if you want using the normal uninstall routine) has fixed this particular problem on at least one occasion. It's worth investigating, anyway.

  • T60p Hard Drive Errors in Diagnostics Test

    I recently started having problems with my internal hard drive. It is just over 1 year old, a Western Digital Scorpio Blue 320GB 5400rpm, 8MB cache.. While trying to extract a few zips, I started getting an I/O Device Error message. I ran a CHKDSK and fixed all the bad sectors. However, even after running the checkdisk, I am still getting errors in the ThinkVantage Diagnostic Tool.
    I have a T60p, model 8743-CTO. Running Windows 7 with 2x1GB RAM.
    Here are the hard drive errors I found with the diagnostics tool.
    FAILED: Targeted Read Test - Error Code WHD20-P5V
    Error while reading sector 6033483899
    FAILED: Surface Scan Test - 2: Error Code WHD08-HMV
    There were over 10 sectors with errors
    Is my hard drive really failing? Like I said, its a WD Scorpio Blue that I bought just over a year ago, I think they should last longer than a year.
    Any thoughts? 

    Hello,
    Sometimes hard disk drives fail prematurely. 
    Just to verify the issue is with the hard disk drive, you might want to remove it from the ThinkPad and connect it to another computer.  The data and power connectors are standard, so this should not be a problem, as long as there is another computer with available connectors.  From there, you can check the drive further, as well as back up any valuable data which might be on the hard disk drive.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Use of a NAS Drive, iTunes, Movies and Apple TV - Help please

    I have an IMAC and i have a number of movies stored there within Itunes.
    My Mac is operated in a Wireless Environment and when using Apple TV sometimes the IMAC cannot be located despite home sharing being on both devices and when it can be located and I watch a movie that is stored there sometimes the signal drops off which interrupts the movie.
    The Apple TV is connected in a wired environment.
    SOmeone has suggested that I should move my Itunes library music and movies to a NAS drive and connect that to my router which is hard wired,
    Suggestions help and guidance welcomed

    Update: I've found a work-around that lets me watch the movies, although it disables the iTunes Extras content (but it's not deleted).
    While looking through the files for the Extras content, I noticed that for the two films I've had trouble with (X-Men Origins and Twilight), the Extras content was located in a separate folder from the actual mp4 movie files. For all my other movies that have the Extras content (and that were working), the content was in the folder with the movie. I tried moving the content into the movie folders, but that didn't help. Eventually, I removed the extras content from my iTunes library, without actually deleting it.
    This caused the Apple TV to pick up the movies as if they were by themselves without the Extra features, and allows me to play them directly without going through the Extras menu. Something about the way that the Extras content was downloaded and associated with the movies seems to have gone wrong with those two movies, whereas for the others it worked correctly.
    This is obviously not a long-term solution if you want to watch the Extra content, but at least this way the movie is streaming correctly on the ATV.
    PS: for those two movies I mentioned above, the Extras content was listed separate from the movie itself in the iTunes library; whereas for the correctly functioning movies with Extras, the content was listed as another "track" under the movie.
    Message was edited by: natec16

Maybe you are looking for

  • How to "Add" a combo key of 3 fields from a page into other pages ?

    Folks, Hello. My PeopleSoft component has 5 pages. Its layout looks like below: AddJournal     Header          Lines          Total           Error "AddJournal" is the first page that has 3 fields: OperatingUnit, ID, Date. The 3 fields is also a comb

  • HTC Sensation not able to open text messages sent from iPhone4 iOS6

    Up until I installed iOS 6, my friend had no trouble receiving and opening a standard (green) text message sent from my iPhone4. After the new install, his phone receives the message but as a text file that won't open. He hasn't changed anything on h

  • Problem navigating article with prev next buttons

    I place a next and previous button to navigate between pages in the same article using gotonextpage but it stops working after a few times navigating the article. I tried with navto://article# but it did not worked either

  • BPM task header issues on the task page.

    Hi, we are placing just the data header on the ADF page for the task, and after deployment its failing and throwing the below error. We have nothing on the page apart from the task header. Task is totally failing due to this object. Feb 18, 2013 6:02

  • JPY and HUF currecny issue

    Hi Experts, I have a requirement where I have to display currencies according to TCURX table. Ex- Current display - HUF 12.000,00 expected o/p - 12000 As in the above table for this currency no decimal places require as maintained in TCURX table. Let