Removed PS CS3; now CS5 says there is a file missing.....

I used the Adobe CS3 uninstaller to remove PS CS3. When I start PS CS5, I get an error message that there is a file missing from Application Support and telling me to reinstall CS5. Before I go ahead and uninstall CS5 and then reinstall it, I want to be sure that is the right thing to do. Help appreciated!
Jeff

Or.... use AppZapper and it will remove the app and relevant files without touching the CS5. files.
But in all honesty, your better off folowing the advice posted above.
Remove CS5
Remove CS4
Reinstall CS5
In that order...
I have CS4 and CS5 running side by side right now, but I just got a new 320 gig HD and space is not at a premium anymore for this MacBook. I still don't have 64 bit filters from Flaming Pear and Alien Skin, and I don't see the point of running PS CS5 (a 64 bit app) in 32 bit mode on a 64 bit OS, so I keep CS4 for quick edits. Otherwise I use CS5 almost exclusively.

Similar Messages

My vreative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?

my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls

I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls

I did call apple care and they guided me through everything.. they said it was the hardware
I was given this phone last year as a present
i know, it was not new.. so it could have been on an other cell provider i am not sure if it was so at the moment that is all i can do

I updated itunes now itunes says there is a problem and shuts down the program everytime I open it.

I updated itunes now itunes says there is a problem and shuts down the program everytime I open it.

Hello there, cskilli.
The following Knowledge Base article offers up some great, in-depth and practical steps for troubleshooting the issue you're describing:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

IPhoto won't recognize my iPhone 3Gs. just says there's an apple iPhone, instead of the device name, and says there are no files to download, but there are 62 items on my phone... what's going on?

iPhoto won't recognize my iPhone 3Gs. just says there's an "apple iPhone" instead of the device name, and says there are no files to download, but there are 62 items on my phone... what's going on? as far as I can tell I have everything up to date and it's always worked in the past.

Have you already confirmed your Mac as a trusted device? Try this:
Lauch iTunes.
Connect the Phone/iPad
When it asks you to trust it, say yes.
Now try again to import.

I have a avchd file approx 15min in lenght on a sdhc card. My camera says there is one file. When I put the card in the PC ( Win8.1), the PC says there are 2 files,

I have a avchd file approx 15min in length on a sdhc card. My camera says there is one file. When I put the card in the PC ( Win8.1), the PC says there are 2 files, one is 11mins approx and the other is 4mins long approx. If I bring these files into premier CS6 they are both identical length of 15mins What is going on here??

Hi and thanks... kinda getting there but still unsure WTF. I have found that the files are split at 197gb (consistent with other uses on the web), however when I import them into premier cs6 they are 15mins and 29secs, on the SDHC card the file size is 197gbfor the larger, then the shorter one is 634mb. BUT when I import both files into premier cs6 they are identical size and length both are 15.29.19 or 15mins 29sec and 19frames. I have put the card in the camera and run that as an external and it sees the files as 2 split files while if I view the files straight off the camera there is only 1 file. Why it says there are 2 files of different sizes and premier imports them as 2 identical files is a mystery to me! I have also gone back and looked at some archived footage on another card and yes there was one split file when the size exceeded 197gb but of course when I imported that footage nothing was missing because cs6 imported the file as a complete 'take' of the whole length

When I try to take photos off my ipad it says there are no files

I'm trying to take the photos off of my ipad and put them onto my pc that is running on windows 7.
When I connect my ipad to my laptop it shows it as a camera device but when I click internal storage and then the DCIM folder there are no photos there.
I also tried right clicking on my ipad and clicking import pictures and videos but it says there are 0 files.
All of the photos have been taken on my ipad and are definetly there.
Help?

I'm In the same situation.
sms does not appear to work in the UK

Please help!!! FCPx every time I import a video clip, it says that there is 1 file missing and it turns red.

Hi everyone,
I really need some help!!
I have started a new FCPx event (saved to my external hard drive) and every single time I upload video clips (.MOV) to Final Cut Pro, everything looks normal and great but within a minute or less, it says that there is a file missing (for each clip that i have imported) and the clip turns red. The clips still play fine and I can continue editing, but I don't understand why it keeps saying the file is missing??? I have tried relinking these clips with their originals found on my external harddrive, but again, after a few seconds, it says "1 file missing".
Am I importing these clips incorrectly? Are they corrupt files?
I appreciate any advice.

Hi amnolan,
Thanks for visiting Apple Support Communities.
If Final Cut Pro is unexpectedly prompting about clips missing from your project, start with steps 5, 8, 9 and 10 from this troubleshooting guide:
Final Cut Pro X 10.1: Troubleshooting basics
http://support.apple.com/kb/ts3893
All the best,
Jeremy

I lost my itunes on my computer it tells me there is a file missing for it to work

I lost my itunes on my computer, it tells me there is a file missing. I uninstalled it and re-downloaded it and not it tells me that it cannot be installed because I may not have sufficient administrative rights on my computer

See the user tip https://discussions.apple.com/docs/DOC-6562 for the most thorough discussion of resolution of the iTunes issues.

I had a book on my iPad 2 and now it says there is an error on the page and there are no words, although it still shows up on my iPhone fine

I had a book on my ipad 2 and all of a sudden it's saying there's an error on the page and all the pages are blank. It still shows up fine on my iphone. Any ideas how to get it back on my ipad without rebuying it?

As long as it is still available in the store then you can re-download it for free - you will need to delete it from iBooks on your iPad before you can try re-downloading it. You could also try copying it from your iPhone to your computer's iTunes via File > Transfer Purchases (assuming that it's not already on there), and then sync it to the iPad.

I updated my iPhone 4S and it completely restored my phone and now it says theres no sim card in it when there is

My iPhone cant do anything without the sim

Does the message say there is no VALID sim in the phone or that there is no sim at all ?

How come most of my songs i purchased on itunes don't work? It says there is no file found for it when I bought the songs. I need help!

I bought many songs from Itunes and when I went to plug in and download my songs onto my laptop it only downloaded 20 songs that I purchased and the rest were counted as "There was no file to support this song" And I don't know how that even happened and now on my ipad none of the cover art for the purchased songs show up and none of the songs I bought on itunes are shown and play when I go to the purchase part of the music itunes store and its really ******* me off making me feel like I just wasted money on buying songs I can never listen too! I need to know how I can fix it ASAP.

You can redownload the songs as many times as you want, the "one time regrant" no longer exists. Make sure you are using the same apple id on both your dead itouch and your iphone 4. On your iphone 4 go to the itunes app > Purchased (may be under more based on your settings) at the top click not on this iphone, click all songs then click the little cloud next to each song you want to redownload. It will prompt you for your id and password and the begin your download

My lap top wont import pictures from auto play. it keeps saying there is a file error and a device connected to the computer isnt working properly. i have tried going into the internal storage to copy and paste the pictures but this wont work either.

my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

USB not loading and saying there are no files...

My USB has content but won't load properly: the drive shows on the desktop but with no name - just quotation marks when referenced.
When i open it the folder it says it's empty, but when I 'get info' there is over 12gb taken up.
I tried to use disk utility but it say it "error:live file system repair is not supported"
Despite the fact that it won't load properly, it won't let me eject as it says its in use - however I have closed every possible programme that could be using it and restarted my macbook several times.
When I try to use the USB on a Windows PC pretty much the same happens - showing empty even though it says half of the space is taken up.
So do I need to look at trying to recover the files that are on there or is it not too late to get this sorted? I'm very new to using Macs so any help would be much appreciated!

Pics synced to your iphone from your computer are one way- computer to iphone.
If these are the pics to which you are referring then copy them from your old computer or your backup copy of your computer, to your new one.

Keeps hanging up saying there are duplicate files, then stalling out

Compressor will compress my video all the way to half way, then red exclamation marks will appear next to the two files saying that there are duplicate files with the same name... to preserve the original files change the name of the file I'm compressing. So I change the name, and then the progress line stalls out forever like it gets stuck after it tells me to change the name.

Actually, this sounds like normal behavior.
When you click the submit button, Compressor passes the encoding job to QMaster. QMaster then starts writing the necessary files in the destination that you set with the filename that you set.
Compressor sees the new files being written into your destination, and puts up the alert. This is standard behavior. There is no need to change the output filename in Compressor once the job has been submitted.
Compressor doesn't need to be kept open once you submit the job. To monitor the encoding, open Batch Monitor.

Removed PS CS3; now CS5 says there is a file missing.....

Similar Messages

Maybe you are looking for