Removed unneeded languages - now can't run Device Central?

Hi there,
I can't run Device Central at all - I get the following error (attached as image)
I suspect this is because I removed some unneeded languages using Monolingual.
Surely if I'm developing for the English-speaking market, DC shouldn't fail to start at all because I don't have Thai script, for example.
Urgent help required as I now have a mobile project to complete!
Sincerely,
Luke Munn

Some quick additional notes.
I'm running Mac OSX 10.4
I have DC CS3 and DC CS4, the first from a Photoshop Elements install I believe and the second from Flash CS4, my main workspace.
I've just tried running the CS3 version of Device Central and this seems to work fine.
But obviously I'd like to run the CS4 version for it's new features, for better integration with Flash, etc.

Similar Messages

  • Upgraded to lion but now can not run parallel desktop.

    upgraded to lion but now can not run parallel desktop. The message show can not load parallel drivers.
    Anyone can solve it?

    Do you have Parallels Desktop 6?  That is the version you need to have it run under Lion.

  • Had to remove firefox and now can't download to re-install

    Due to 'someone' downloading something and getting malware, which should now be gone, but to clear completely removed firefox. Now using IE (yuk) tried to download FF. The firefox setup screen comes up and the rolling progress bar is going across the page but for 20 mins nothing more.

    hi again, please perform all these steps if you suspect that you have malicious software present:
    # [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
    # afterwards go to the firefox menu ≡ > addons > extensions and in case there are still extensions listed there, disable them.
    # finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
    [[Troubleshoot Firefox issues caused by malware]]

  • I installed framemaker 12 and now can't run acrobat

    i downloaded trial version of framemaker 12 and now can't access my acrobat 8

    Hello chrisd52733482,
    Could you please let me know what version of OS are you using.
    Also, tell me what exact error do you face when you try running Acrobat.
    Please ensure that you are logged in as administrator and anti-virus is disabled on your machine.
    Hope to hear from you.
    Regards,
    Anubha

  • I installed a new vision of Itunes that was sent to me but now can not run ITunes

    I tunes was working great up to today when I installed the new vision sent to me now I can not open Itunes I get this message Itunes was not installed correcly. Please reinstall Itunes Error 7 windows error 126. I try to reinstall Itunes but it does not help not sure what to do next.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Removed Safari and now can't install it.

    For some odd reason, Safari stopped autofilling email addresses in Yahoo mail. I'm not sure if it was something I did, but it definately happened. The first thing I did was to "reset" Safari. That didn't help. So, I decided to download Firefox to see if autofill worked in Firefox. It did. So, I had the bright idea that I must have inadvertently done something to Safari to make it stop autofilling. In continuation of this bright idea, I decided to remove Safari and reinstall it to see if that fixed the problem. It didn't. So, then I thought, "well, perhaps there were some files or other things hidden deep in the emac that I needed to remove in order to completely get rid of Safari". So, I went into spotlight and got rid of every last thing that had the word Safari in it.
    I went to apple.com and downloaded Safari 2.0.1. When I tried to install it, I got to the part where you choose where you want to install it and I got the message "You cannot install Safari onto this drive, it requires MacOS 10.4.2. I find this odd, since I have 10.4.6.
    I DO NOT have my emac reboot/startup disk. I have somehow lost it.
    Does anyone have any recommendations for me?
    Thanks, Rich

    smithsfan,
    Welcome to the Apple Discussions!
    It sounds as if you trashed some of the Library and even framework files, not just the user preferences. Do you have a separate Restore DVD or an Applications disk? If so, you can use that to reinstall Safari including it's library files, then use the 2.0.1 installer.
    General Safari troubleshooting is in Safari quits unexpectedly
    You can call Apple and ask about ordering a replacement OS disk; with proof of registration (i.e., the serial number inside the optical drawer cover) you can order a replacement for considerablly less than buying a new Tiger Install disk. That would let you use Custom installs in Mac OS X 10.4 to reinstall Safari.
    (Worst case, you can always use Firefox as your normal browser --- I do, since I prefer it's sidebar for viewing bookmarks, plus it's a consistient interface when using Firefox on that other computer OS.)

  • Loaded latest version of itunes now can't find device for ipod to enable dragging tunes?

    Just loaded latest version of itunes but can no longer see ipod device in left column to enable dragging tunes?

    Hello remslicer, I just did this and it seems to work, I had the exact same problem and I just read what to do on another users reponce,
    I re-set my phone
    hooked up the phone to my computer,
    let it do its syncing, 
    then I went to podcast page and un-sync and I did this with music as well, and hit apply.
    go back and re-sync and hit apply again.
    I went to the app and it started playing the podcast I have saved on my desk top.
    I  hope this works for you too. Good luck

  • What is the best way to find and remove unneeded language files from Mac OS X 10.8.4?

    I have tried Spring Cleaning and it finds the files and then quits!

    You can do this with a *FREE* utility called Monolingual.  Another app that apparently does all the work for you.  I’ve used it since Tiger w/never any problems.  Just make sure you read all of the instructions.
    However, there is a warning for *native English speakers*. Make sure you keep BOTH English and English (United States).
    Works on OS X 10.8 (Mountain Lion)

  • Loaded lion and now can not run microsoft office. Any help

    need help figuring out why my office programs will not work with lion

    Go to Microsoft's web site and you can download it.
    http://office.microsoft.com/en-us/buy/

  • TS3274 I have downloaded the latest version of Itunes to my laptop, but now can't see my iPad and iPhone in iTunes.  any ideas?

    Can anyone give me advice about the question above.  I have downloaded ios7, have downloded latest iTunes and now can't see devices in iTunes.  Using Windows 8 (horrible), which just jumps me into questions about pictures

    Are you saying that when you connect your iPad to your computer an application starts on your computer to download photos? This is how you copy photos from your Camera Roll on your iPad to your computer. You may have the photo capture application to run automatically when a camera is connected to your computer. Your iPad is recognized as a camera and this is normal behavior depending on the settings on your computer.
    You can either change the settings to not have the image capture application run automatically or you can just quit that application manually. You might want to copy the photos to your computer first so as to have a backup of the photos.
    If you quit the image capture application you can then run iTunes. I suggest, in iTunes that you use the View menu to View Sidebar. Your iPad will then appear in the left sidebar of iTunes. Select your iPad in the left Sidebar of iTunes and then you will be ps enter with a row of tabs allowing various choices.

  • Can i run windows live messenger

    i got a brand new macbook pro and im updating it now, can i run it and download it or is there a way to put all my contacts on i chat

    Look here.
    Regards.

  • Does Device Central accepts input from Flash Catalyst?

    I'm a newby, and thinking of buying CS5. But I first want to know if I can check in Device Central if the SWF's and RIA's from Catalyst function properly on all kinds of phones.
    Is that possible??
    Gr Willem

    Flash Catalyst produces content based on Flash Player 10. So only phones that are capable of displaying Flash Player 10 or higher content could run the project in their phone's browser. Currently the Flash Player 10.1 plugin for mobile is in beta. For more information on that visit http://labs.adobe.com/wiki/index.php/Flash_Player_10.1_for_Android
    My Android phone has not been upgraded to FroYo, so I can not test this. Given the nature of mobile development and the current weight of the Flex Framework, I would not recommend this as a solution for anything other than initial proof of concepts.
    Hope that helps!

  • Device Central and Dreamweaver

    Hello,
    Can I use Device Central with Dreamweaver 8? Also, can i use
    itr to develop (either in DW 8 or CS 3) WAP site withoiut using
    Flash, or does the site needs to use Flash?
    Thanks,
    Ray

    Device Central only works with DW CS3 (not DW 8 or earlier).
    You don't need to use Flash to use Device Central. You can make a
    WML page in DW CS3 and then preview it with Device Central. Here
    are the steps:
    In DW CS3, choose File > New > Other > WML.
    The WML file will only display in DW's code view.
    Enter some text between the <card> tags.
    Save the file and then choose File > Preview in Browser
    > Device Central.
    The WML code displays in the selected phone emulator.
    There are some existing posts about WAP/WML on the DW forum
    that you might want to read:
    http://groups.google.com/groups/search?q=group%3A*dreamweaver*+wml&start=0&scoring=d&
    You may also want to post this question on the main DW forum
    to get more feedback from DW users who may not be following the
    Device Central forum:
    http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=12&catid=189&entercat= y
    David Alcala
    Adobe Tech Support

  • HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

    After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

    Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
    Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
    Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

  • My I phone is missed and by mistake i remove this mobile from I cloud device list now how i can restore this device in i cloud as now mobile is not with me

    My I phone is missed and by mistake i remove this mobile/device from I cloud device list now how i can restore this device in i cloud as now mobile is not with me

    Once removed, you can turn on Find My iPhone on the device remotely.

Maybe you are looking for