Removed usb without ejecting first, now that port will not recognize a usb card. how do i reset?

I had a usb memory stick that I removed without ejecting it first. Now that port will not recognize a usb memory stick. How can I reset this port?

How do i reset my Iphone 4 password without restoring to default?
If you don't remember it, you can't.

Similar Messages

  • HT4061 I bought my mom an iPad for Christmas this year.  We can't use it as it will not recognize her passwords.  How do I reset it without using passwords.  I want this thing wiped clean, just like it came from the store so that I might start over.

    I bought my mom an iPad for Christmas this year.  We can't use it as it will not recognize her passwords.  How do I reset it without using passwords.  I want this thing wiped clean, just like it came from the store so that I might start over.  This is very frustrating!

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
     Cheers, Tom

  • In the middle of restoring my iphone 3Gs in itunes, some kind of error occurred and now my iPhone is stuck on just the factory setting of "connect to itunes" screen. Now my computer will not recognize the usb port. I tried other computers. What can i do?

    I really need help, i had just finished activating my iphone, and now im loosing money because i cannot use it.

    What was the error number?  That would be very useful since the following gives actions for various errors.
    http://support.apple.com/kb/TS3694
    Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes.  See:
    http://support.apple.com/kb/HT1808

  • How can I get back my Word docs now that Pages will not open them?

    How can I retrieve my Word docs now that Pages will not open them in Mavericks.  I have a brand new iMac with my evolving manuscript for a book transsferred from my now defunct MacBook Pro by external drive.  Pages tells me that "PowerPC apps are "no longer supported" and Mavericks will not open Microsoft Office, though it is still in Applications.  Would really appreciate ANY help!

    You will have to have an app that will open them first, you can upgrade to Office for Mac 2011 which is an Intel based app then open the docs and retry. Your docs were created with extremely old version of Office for Mac, version 2004!
    Another possiblity is  using a web based compatible MS Office for Mac app and see if it will open your doc and then save it, then attempt to re-open in Pages.

  • My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

    My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

    I'd start by looking in system profiler.
    the blue Apple icon > About this Mac > More info...
    goto the hardware section. Scroll down and click on  USB
    See what happens when you have the device plugged in & not plugged in.
    Move keyboard & mouse around to verify that ports work. Plug device in a port that worked with keyboar or mouse.  Keyboard usb ports are rather low power.
    Perhaps device is taking too much power.  Are devices power or unpowered?  Try connecting devices to a usb hub.
    Which mac do you have?
    What iMac do you have?
    Report system info
    Blue apple > about this Mac
    click on more info
    click on hardware
    do not copy your serial number

  • I am currently in my free trial of photoshop elements. I would like to purchase but Im using a computer now that i will not be using in a few months. How would I get that to transfer over? Thanks,

    I am currently in my free trial of photoshop elements. I would like to purchase but Im using a computer now that i will not be using in a few months. How would I get that to transfer over? Thanks,

    Hi Jtomanek,
    Open the Editor on your old PC and on the menu bar click Help and Deactivate or Sign out.
    Thanks & Regards,
    Sanjeeta

  • HT5622 I set up a passcode that will not unlock the screen. How do I reset the passCode?

    I set up a passcode that will not unlock the screen. How do I reset the passCode?

    If the passcode will not unlock the screen you are entering the wrong passcode. To change or remove the passcode you can use the settings app.
    Settings > General > Passcode Lock
    The caveat here is that to make changes to the passcode lock you need to enter the correct passcode lock.
    If you do not know your passcode you'll have to restore your iPad by connecting it to iTunes on your computer.

  • Switched MB Pros, Used TMachine to Migrate NOW New MB Will Not Recognize ..

    Just switched from previous gen MB Pro to new MB PRo...Used TMachine to back up and Migrate NOW new MB will not recognize my "old" MB archive and wants to start a new TMachine archive.
    New machine has name "name (2)" and old machine was "name". Is there someway to let T Machine "know" that I want to use the same archive to maintain continuity?

    Bob Adler wrote:
    Just switched from previous gen MB Pro to new MB PRo...Used TMachine to back up and Migrate NOW new MB will not recognize my "old" MB archive and wants to start a new TMachine archive.
    New machine has name "name (2)" and old machine was "name". Is there someway to let T Machine "know" that I want to use the same archive to maintain continuity?
    As Mr. Boyd says, TM has been enhanced in Snow Leopard to let you do this easily, but it's a problem in Leopard.
    Some folks have tried the procedure in #C8 of the Time Machine - Troubleshooting *User Tip* at the top of this forum. It may not work well, or at all, in this case, since it's two rather different Macs, not the same Mac with a new logic board.

  • No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

    No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

    Most likely the phone is locked to a carrier that you haven't tried yet.

  • My mac has had refresh and install now my password will not work on the hardrive how do i change this?

    my mac has had refresh and install now my password will not work on the hardrive how do i change this?

    Boot from your install disk and when you reach the Install screen choose Change Password from the Utilities menu.
    Also check this Apple article http://support.apple.com/kb/HT1631

  • I have a tungsten e2 that will not recognize the sd card. I have tried multiple cards and none work

    I bought a older tungsten e2 for use in the field but it will not recognize the sd card!  Any ideas?  I have tried multiple cards and it will not recongize any so far!

    PalmBlue wrote:
    775boomer,
    There is a SD card size limit for Palm Devices. 
    What is the smallest size you have tried?
    http://h30434.www3.hp.com/t5/Palm-OS-WinMo-Hardware-and-Software/Maximum-quot-Tested-quot-Expansion-...
    Please visit this linked thread.  I have updated the link contained in the first post to the Palm Powerups site where there is a utility available which allows the use of larger capacity SDHC cards in Palm OS devices.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Disc in drive that Mini will not recognize, will not eject. Is there any way to force eject?  The computer says it's empty, but it's not.

    I have a disc in the super drive but cannot eject it because the Mini does not recognize that it's there. I've tried the eject button on top of the screen and in the dvd player controls. I wish there was an eject button on the machine. Is there any way to force eject?
    Thanks.

    RGA,
    Unfortunately, I do not believe that it is possible for a DAQ board to generate an AI Start Trigger from an analog trigger, but not be triggered itself until it receives a digital trigger.
    Spencer S.

  • The Ethernet Port will not recognize that my line is plugged in... Help!

    Hello... My modem recently died on me and my internet service provider installed a new one. Since then, my Airport will not recognize the ethernet line coming from the modem. I have access to the internet only by a direct plug-in to my mac from the modem.
    I have shut it down, restarted, re-installed and keep getting the same response from the airport: no ethernet found.
    Any ideas on how I can get my wireless back?
    Thank you in advance.

    Try turning off the wireless on your computer and temporarily connect it to one of the LAN <-> ports on the AirPort Extreme to see if you can get an Internet connection that way.
    What happens when you try this?

  • I have a new wireless router and now my laptop will not recognize the printer.

    I recently installed a new wireless router,Linksys E2500, and now my laptop will not connect to my OfficeJet 4500 wireless printer.  Operating system is Windows XP.  Says it does not recognize the printer.  It was working fine with my other Linksys router and I have been able to connect all of my other electronic equipment.  Thanks.

    You must reinstall the full feature software and drivers again to be sure it will work with the new router.  This is the fastest way.  Simply follow the instructions that came with the printer.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HT2954 I changed my email address on Gmail and now my computer will not recognize the new password when I modify my account?

    I changed my email password on Gmail last night.  I then went into settings on my MAC to reflect the changes but it will not recognize it.  I double checked to ensure I had the right password and it is. I can log into my email from safari with no issues.  I have varified that all account information is correct but its still not working.  I have also lost notes and contacts.

    Keychain is no longer able to update itself when I upgrade an application...
    http://unsanity.org/archives/2007_01.php
    Mail passwords not holding...
    If Terminal doesn't scare you, you might try this line in Terminal...
    sudo mv /var/db/CodeEquivalenceDatabase /var/db/CodeEquivalenceDatabase.old
    Carefully type your admin password when asked & hit enter, as it won't be echoed, then restart the Mac.
    The Password rejection can confuse people since it's a catch all meaning...
    This Password, Username, Authentication method... is not recognized on this Port to this Server.
    So since WebMail works it's not Name or Password, but one of the other ones.
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.
    Is it POP or IMAP?

Maybe you are looking for