Removing 3rd party loops from GB

I've added a folder of loops to my GB loop library by dragging and dropping the folder onto the loop window.
I really hate these loops and now want to remove them (i now realise i should have auditioned them before adding), but can't seem to work out how to do it. Haven't been able to find anything in the forums that explains the process either.
Would really appreciate some guidance on how to do this.
thanks again- Mitch

delete your loops:
http://www.bulletsandbones.com/GB/GBFAQ.html#myloopsstored
(Let the page FULLY load. The link to your answer is at the top of your screen)
then reindex your loop library:
http://www.bulletsandbones.com/GB/GBFAQ.html#reindex
(Let the page FULLY load. The link to your answer is at the top of your screen)
default loop locations:
http://www.bulletsandbones.com/GB/GBFAQ.html#loopsstored
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

Removing 3rd Party Icon from Menu Bar

Just switched from being a PC user for years to Mac. I have a 21.5 in iMac and I thought it was a good idea to install an anti-virus program, in this case McAfee security (Mac Trial Version). I did not like how I could not access some websites (www.cnn.com, www.yahoo.com, etc). I tried to drag-n-drop any files using Finder with the name "McAfee" into Trash, but the old McAfee icon is still sitting on the menu bar. To remove it, I tried the "Command key/drag off the menu bar" move, but it would not work. I tried starting the activity monitor and I noticed a file called McAfee reporter. Even forcing it to close does not work as it reappears on its own after a few seconds. Finally, I attempted to edit the start-up menu (Apple icon--> System Preferences --> Users --> Log-In Items), but the program does not exist in that menu. I also resorted to restarting the Mac three different times, and the dreaded icon still appears. It's not affecting performance, but I hate clutter and I want this icon removed from my menu bar. If anyone has any advice on this issue, please let me know. I have also sent an e-mail in to McAfee, but I doubt they will be able to help unless they are proficient Mac users.

I am not sure if this will help anybody in the future, but here is what I discovered on the McAfee community forums. This worked for me (OS X 7.2), but bring up your Terminal window (Launchpad --> Utilities --> Terminal) and follow these directions. The password they are referring to is the password you set up for your Mac:
To uninstall McAfee Security:
1. In the Terminal window, type the following
command and press "return".
/usr/local/McAfee/uninstallMSC
2. When prompted, type your password and press
"return".
NOTE:
No characters appear when you type your
password.
When the uninstallation process completes, a message
appears in the Terminal window stating that McAfee
Security 1.0 beta 2 version has been uninstalled
from your computer.
I cannot take credit for this fix, but here is where I located the information.
https://community.mcafee.com/message/21696#21696

Calling 3rd party softwar from ABAP

hi all,
I would like to know is it possible, if yes, how to perform a call to launch external 3rd party software from ABAP (example, half way in process of a BDC session) and pass back the information from 3rd party software back to ABAP.
Thanks in advance!
Regards,
JL

Hi,
For that please refer to the following link:
http://help.sap.com/saphelp_nw70/helpdata/en/80/b711d7d6d03d4a956f16bb854a186e/frameset.htm
Regards,
Renjith Michael.

Query: Selective Transferring of old data (3rd party app) from old iPhone

Hello all.
I am collecting my new iPhone 3GS tomorrow
(and) I want only to add some, and not all the 3rd party apps (from App Store) that was with my old iPhone, in particular, Notes+
I know if before I perform a software restore or upgrade, iTunes will perform a back up of the phone, and if I insert a new iPhone, and choose the same name, e.g. "howwow iPhone", it will restore all the apps and data into the new phone.
But if I treat this new 3GS phone as a new phone, e.g. I name it "My 3GS iPhone" and add the Notes+ app, will all the data inside be copied into the new phone?
My main 2 aims are to only add some apps I need (like Notes+) to the new phone and still able to keep the data/notes in it, without re-adding manually.
Thanks and cheers

There is no way to selectively restore certain data from the backup to the new iPhone - it's all or none. If you set it up as a new phone, none of the old data will be transferred. Alternatively, you could set it up from the backup, then delete all of the unwanted stuff.

Deleting 3rd Party Loops... where the freak are they stored???

Yes, I know that by default, loops are stored in Library/Application Support/Garageband/Apple Loops, or the similar address under my user library.
And, I know there is another folder close by, for Jam Packs.
However, I have been going INSANE, trying to find old, single-hit files and obsolete loops which i have downloaded from 3rd party sources. They are NOT in the regular places such as the Apple loops folder.
All of them were installed by drag and drop method into the Garageband loop browser, so one would assume they all went to the same place.
How in the world do i find these loops?
The Finder and Spotlight have turned up nothing.
I have about 5,000 i'd like to trash to make room for more important things.
Can Garageband be THIS cumbersome?

HangTime wrote:
yes, that was telling him to not delete it by hand because, as Christoph points out above, you then need to reindex, whereas deleting it through GB takes care of that.
with 5,000, it's probably worth the reindex, deleting one at a time through GB would be ... tiring.
Actually. i like your idea of deleting from the browser. They are scattered in different categories and different folders. I'd have to search and test them anyway... so I might as well just axe them when i come upon them in the browser.
I swear I've tried it that way before, to no avail..
Thanks a lot for you help.

How to uninstall 3rd party app from MacBook Pro?

Does anyone know how to uninstall a 3rd party application (RMSViewer) from MacBook Pro? The app doesn't work and I want to remove it from memory. I can't find an "uninstall" utility on my computer and the 3rd party software doesn't include an uninstall link.

Tap and old the app until it starts to wiggle. Tap the "x" that appears on the corner of the icon.
If that doesn't work, check Settings>General>Restrictions to see if removing apps is restricted.
You may also want to take a read through the manual:
Apple - Support - Manuals

How do you install and delete 3rd party plugins from Logic 9?

I have been trying to install RX2 from iZotope with no success. I can authorize it in the standalone version but not in logic. I had a previous demo version of it installed and everytime I went to authorize it would point to the earlier version and not authorize and run in demo. I removed a number of files pertaining to it from HD & User/ Library/ Preferences and Audio/ Components and tried reinstalling. Now it doesn't even show up in the plugin list. Can anyone tell me how to clear this up? Also, how to deal with 3rd party plugins. What can I say, no problems with Reaper! Appreciate any help with this. Thanks

The Isotope website isn't very clear about it.. It seems to indicate the Windows version is 32 and 64 bit where as the AU version is 32bit and will work/is compatible with Logic 64bit.. which it will as it will run under the 32 to 64bit bridge... when Logic is run in 64bit mode..but as i said, it's hard to tell one way or the other.
The thing is, if you simply reinstall it.. and then run Logic first in 32bit mode and then in 64bit mode.. it should show up.
Where are you looking for it in Logic?
Does it show up in the AU Plugin Manager? (after, that is you have reinstalled it)

3rd party apps from someone other then Apple

Does anyone now if you can get 3rd party apps without jail braking and without using Apples application store. I found a website that offers apps that I really want and was very disappointed to see none of the in the Apps store and dont know why nobody made them or offered them there. For $24.99 I can get all these apps that I was really looking forward to seeing in the apps store but werent:
NES System : Nintendo with all the games
Customization : Were I can custom every aspect of the I-Phone from I-cons to backgrounds
Screen shot : A app where I can take a picture of anything that my I-Phone is viewing at that time like from a game or a website ETC.
Video Recorder : I cant believe there was no video recorder in the apples web app release it is just something every phone should have
MMS : Picture messaging, I mean I dont know how many times I recieve a picture message and have to wait till I get home to go on my computer to go to a website just to see them. How long it takes also with normal broadband just to see a simple picture.........This is a must have app
Ringtone: Now all you have to do is select a song from your music library and put it to you contacts that easy no cutting or editing it down to size, no extra programs to make them with and no money to spend to make them
Also much more that I dont feel like describing like:
Instant Messenger
YouTube Downloader
Books
VNC
<post edited by host>

Wow don't try to send a MMS to someones cell phone from the e-mail option this was a nightmare. I tried it to see if it would work and I received a message that the attempt didn't succeed so it kept trying and trying automatically. Then I get a phone call from the person I sent it to telling me it work but for me to quit sending it. I said I only sent it once then he said I have like 15 already so I check out my phone and it is really warm I looked at it and the battery went from fully full to a little less then half empty. So I am like what the heck so I go into my e-mail account and I see there is an e-mail demon meaning there was an attempt to send a e-mail but it didn't succeed. Normally when this happens it will make another try just to make sure it wasn't a service error well apparently my cell phone is continuing to retry to send the message so I have the phone trying my e-mail account trying while the person who the message is being sent to is receiving everyone........So I had to delete every message being sent on my e-mail account, I had to delete my E-mail account on my phone, and I had to shut it off for 30 minutes to see if this works it not I don't know what to do and my nightmare continues as well for the person who's phone keeps blowing up with the MMS message and I am wasting all of his text on his plan.......
Thanks for the bad advice

Distribute different versions of data to 3rd party systems from SAP ERP2004

Dear fellow SDN users
I am working in a large retail company where we are about to implement a new store system. The new system should be implemented in phases, where each phase covers one or multiple countries. Until the implementation is complete, our old store system should still be supported.
My problem is that we also need to support multiple versions of the systems, which is something we have never done before. Do any of you guys have any experience in how to differentiate versions of the data being sent from SAP to 3rd party systems? The scenario today is:
SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1
And the scenario we would like in the future:
SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1/STORE SYSTEM2
(Where it is possible to send several versions of data: e.g. ARTMAS ver. 1 to SYSTEM1 and ARTMAS ver. 2 to SYSTEM1 and ARTMAS ver. 1 to SYSTEM2)
The first thing that came to my mind was to differentiate on IDOC extension and then program different routines per extension when sending the idocs, but I guess there should be an easier way.
Any idea is greatly appreciated.
Best regards,
Chris

Hi Chris
I guess it depends on how the information you want to send to various partner systems differs, but have you considered using reduction?
I am at a client currently where we need to send similar information to a number of systems - for example Customer information using the DEBMAS message type, is going to three seperate systems.
To do this we defined 3 reduced messages - Tcode BD53. This not only reduces the load placed on PI/whatever middleware system is used by eliminating unnecessary data from each message variant, but allows the message to be treated differently by PI, using different data mappings, distribution models etc.
Hope this helps

Problems connecting 3rd party webservices from workerrole

Hello,
I have the problem that since 2015.01.28 ~22:00, my service deployed as a workerrole in an Azure instance cannot reach 3rd party webservices. This was a sudden issue as it worked for half a year without any changes.
The 3rd party webservices work fine, I can reach them from my development environment without any trouble, the provider of these webservices also could assure me that it works fine for others.
The call that fails is a simple WebClient call (with credentials) to a URL in order to read a (tiny) file and take followup actions.
The call fails with the following error:
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond
after a period of time, or established connection failed because connected host has failed to respond <ip:port>
The question: have there been any changes recently, either in the Azure services environment or networking that could explain this?
If i connect remotely to the instance and attempt to make the calls manually via IE, they succeed, but very slowly.
I have deployed the service to another datacenter as a test, so right now I have one running in East US and Western Europe, but both face the same issues. The service is running on Azure SDK 2.1, the instance is running on windows server 2012R2.
The service works fine when I run it on my development environment via compute emulator. No connection issues.
Any help is welcome, thanks ahead.

Looks like a timeout issue. Try to increase timeout of your call to see if you get any success. If OK, then for sure it is timeout problem. Then check if it is DNS problem. Use IP address to call instead of hostname. You mention it is slow in IE. Where
is IE located? You can also try to call using IP address instead of hostname to see if it speeds up. Is it slow only the first call?
Frank

Interfacing to 3rd Party tools from BW

I realize Open Hub is the SAP solution to interfacing BW data to 3rd Party tools.
However does anyone see a problem in general with the approach of developing custom web services on the BW box that would be called by a third party tool and in turn return Master Data and ODS objects?
Wardell

Hi
You can also use direct SQL reads to the BA DB (for ODS only), Also ABAP code.
If you want to manipulate the data (transactional and Master data) you can use BAPI functionality.
In our company we used BAPI to manipulate SD data from a third party tool (Web based) but not on BW.
Edan

Allowing 3rd Party Cookies from Specific Sites?

Is there a way to allow specific sites to use 3rd party cookies or is it all or nothing?
Safari 7.0 (9537.71)

All or nothing for Safari but Firefox cookies preferences allow enabling or disabling cookies for individual sites > Block websites from storing site preferences or login status in Firefox | Firefox Help
Download Firefox — Free Web Browser — Mozilla

FInal Cut X and 3rd Party Plugins from Previous Versions

will they be compatible?
i've got plenty of 3rd party plugins i've normally used with fcp 6.
will i be able to use them with fcp x ? or is it a completely new platform?
cheers.

I've said it elsewhere, but using FCX is like being asked to carve a roast and being handed knife purposely dulled to keep me from hurting myself.
However, while it is not a viable tool for the broadcast professional, I am sure there are many professionals who can use it to do their job.
To the OP, FCP 6 plugins, will work in FCP 7.
BenB wrote:
...snip...
As for plugins, FCP X uses a whole new underlying framework, totally, radically different technologies under the hood than legacy FCP 7 versions. So those plugin developers will have to port their wares over to the new platform.
...snip...
This is in fact, largely untrue. FCX effects are Motion wrappers, often interfaces directly to FxPlug plugins that have been around since Motion started. The FxPlug plugins developed for earlier versions of the software need to be rebuilt with the new frameworks and Motion wrappers constructed, but FxPlug 2 is not radically different technology from FxPlug 1.2.5.
Patrick

Removing the master loop from the menu

I am trying to make a simple template with none of the design elements from the canned templates.
I cant figure out how to start a new clean one and I cant figure out how to eliminate all of the elements, mainly the
Bluemaster_loop_NTSCv2.mov (Video)
thanks.

The only way to get rid of it is by resetting your phone, you will need to backup first.
Try the first code but it's more likely to be the second one that gets rid of it.
Reset to factory defaults (*#7780#) : Restores settings but preserves user data (photos, 3rd party apps etc)
Reset (*#7370#) : This reformats completely the C: drive. All applications and files stored on this drive will be lost and clean default files will be rewritten.

Accessing 3rd party jars from ear.

I was able to create a war with the 3rd party jars in webinf/lib, register it with weblogic and access them from webapps another ear, after specifying this reference in EACH of the webapps.
However if I want to just make the ear reference these jars, ie., all the webapps in the ear access these jars, without individually specifying the reference, then it gives me an error.
What is different with providing a reference from an EAR ? I added it to the weblogic-application.xml as the docs suggested....

http://www.jcp.org
Cheers
mbg
"joe" <[email protected]> wrote in message news:[email protected]..
>
what do you mean by "to integrate this back into the specifications"? whatis the
J2EE way to achieve it if there is one? Thanks
"Mark Griffith" <[email protected]> wrote:
Nope, embrace and extend. We are working to integrate this back into
the
specifications.
cheers
mbg
"Joe" <[email protected]> wrote in message
news:3e77c70d$[email protected]..
Is that part of J2EE or weblogic's implementation?
"Mark Griffith" <[email protected]> wrote:
Upgrade to 8.1 and stick the jar's in myEar/APP-INF/lib
cheers
mbg
"Jen" <[email protected]> wrote in message
news:3e724f46$[email protected]..
Is there a way to put in one shot instead of modifying every .jar
and
..war's manifest
file.
Philip Strube <[email protected]> wrote:
Hi Sudhindra,
you can put them in your EAR (on top level or you can create a
directory
for them, like "libs" or sth.), and then create class-path entriesin
the manifest files of your WAR and ejb-jars.
Example: if myApp.war needs myUtil.jar, then write a line
Class-Path: myUtil.jar
in the manifest file of myApp.war. If myUtil.jar is in libs, write
libs/myUtil.jar and so on.
-- Philip
Sudhindra wrote:
Hi
I have some common 3rd party jars and zips that are accessed
by
my
WARs and EJB
JARs. Where in my EAR structure do i place them so that these
common
jars like
classes12, formulaone etc can be accessed from within my WARs
and
EJB
jars?
Regards Sudhindra

Removing 3rd party loops from GB

Similar Messages

Maybe you are looking for