Removing a failed Norton AV 10 coporate install.

Hi I'm supporting a osx 10.4.5 xserve, and the client has installed Norton AV 10 coporate server console. However when they installed the mysql wasn't configured correctly.
There is no uninstaller and I have tried to manually remove the files.
I must be missing something as the installer keeps failing now, with the message "There were errors installing the software, please try again"
Any tips on how to completely remove the application and start from scratch. I have logged this with Symantec and am awaiting a call back.

just because you get errors doesnt mean there are some files left.
You could always log in and install from root?
There might be some issues where it's not compatible with your 10.4.5 install,
what does Norton say about it?
Usually it takes awhile before they support the latest upgrades.

Similar Messages

  • How do I remove one failing hard drive from raid set and replace with new one

    Last Friday apparently one of my raid drives started failing.
    As I mentioned on this forum I started getting continous beeping.
    I was finally able to get the raid working at a degraded level.  I ordered a replacement hard drive which is arriving today.
    (In the meantime I made twice daily backups of my work.....)
    Below was the message I got from the browser based raid software:
    Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
    Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
    (See this earlier thread if you wish!)
    http://forums.adobe.com/thread/727867?tstart=0
    At one point when I did the checked the browser interface I saw the message Failed and Degraded
    As I said, I was able to work over the weekend on the degraded system.
    This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
    In any case, the new hard drive is arriving today.
    What steps should I take to incorporate the new drive into the raid system.
    I have one OS drive
    and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
    Thanks
    Rowby

    Harm,
    Regarding your comment:
    Re: How do I remove one failing hard drive from raid set and replace with new one
    Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
    If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
    Step 1: Identify bad drive serial number using Areca's tools
    Step 2: Turn off the computer
    Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
    Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
    Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
    Cheers,
    Jim

  • How do I delete Norton so I can install Trend Micro?

    How do I delete Norton so I can install Trend Micro?

    Norton Removal Tool (Symantec Uninstaller):
    http://www.symantec.com/business/support/index?page=content&id=TECH103489&locale =en_US
    How to uninstall Intego products:
    http://support2.intego.com/kb/index.php?x=&mod_id=2&id=214

  • Server 2012 R2 - The Request To Add Or Remove Features Failed

    I am having a frustrating time adding Remote Access role to my 2012 R2 domain controller (HyperV VM)...
    It keeps failing with THE REQUEST TO ADD REMOVE FEATURES FAILED
    I've tried repairing my component store with no luck...it keeps telling me the server requires a restart.
    Could this have ANYTHING to do with the host machine needing a reboot? That is one thing I've not tired yet.
    I've checked and followed this as well with no luck:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/24ab19c2-84de-4b89-beea-b0e3053c2e61/cannot-install-due-to-pending-reboot-prerequisite-check

    Hi Brian,
    Check the below points regarding this issue,
    - Make sure there are no entries in HKLM\System\CurrentControlSet\Control\Session -Manager\ PendingFileRenameOperations.
    - If there are, reboot to get them processed. Or do the renames manually and delete them.
    - Run DISM /Online /Cleanup-Image /RestoreHealth to clean up the component store.
    - Don't install on a Domain Controller.
    Once you have checked the above points try to add the role again.
    Checkout the below thread on similar discussion,
    http://serverfault.com/questions/524762/cannot-install-rds-web-access
    Regards,
    Gopi
    www.jijitechnologies.com

  • Disable or Remove the Xfinity Norton antivirus

    I use VPN to log onto my company network.  My Norton DAT files are up to date.  My company now detects that my AV program does not meet their criteria (it worked 2 days ago). A message says I must get Microsoft Security Essentials.  When I D/L the Microsoft program and try to install it, it says I must remove all other AV programs.
    So my question is, do I need to totally remove all the Norton Suite that Comcast gave me? Can I just temporarity disable Norton?
    I realize this is a Norton forum, but what else do I need if I have to uninstall Norton in order to install Microsoft Security Essentials?  I know it is not good to run multiple AV programs.

    I believe we use Juniper but not real sure. I work for CenterPoint Energy in Houston and I use the VPN to remotely use my Workstation after I have accessed the network. It is just like I am sitting at my desk.
    I needed to log on so I had to uninstall my Norton suite and install MSE so I could get connected. I did talk to our IT help desk and they said they use MSE on our servers and he said when I try to access our network with the VPN it looks on my home PC for some file and if the DAT is out of date or it does not see an approved AV software, it throws up a message that my AV is not approved.
    I was running fine earlier last week and when I tried Thursday night, it said my AV was not approved and I had to get MSE.

  • ITunes 11.2.2 for Windows x64 will not successfully install.  Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2.  Any Thoughts?

    iTunes 11.2.2 for Windows x64 will not successfully install.  Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2.  Any Thoughts?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
    If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
    tt2

  • Root.sh failed on second node while installing CRS 10g on centos 5.5

    root.sh failed on second node while installing CRS 10g
    Hi all,
    I am able to install Oracle 10g RAC clusterware on first node of the cluster. However, when I run the root.sh script as root
    user on second node of the cluster, it fails with following error message:
    NO KEYS WERE WRITTEN. Supply -force parameter to override.
    -force is destructive and will destroy any previous cluster
    configuration.
    Oracle Cluster Registry for cluster has already been initialized
    Startup will be queued to init within 90 seconds.
    Adding daemons to inittab
    Expecting the CRS daemons to be up within 600 seconds.
    Failure at final check of Oracle CRS stack.
    10
    and run cluvfy stage -post hwos -n all -verbose,it show message:
    ERROR:
    Could not find a suitable set of interfaces for VIPs.
    Result: Node connectivity check failed.
    Checking shared storage accessibility...
    Disk Sharing Nodes (2 in count)
    /dev/sda db2 db1
    and run cluvfy stage -pre crsinst -n all -verbose,it show message:
    ERROR:
    Could not find a suitable set of interfaces for VIPs.
    Result: Node connectivity check failed.
    Checking system requirements for 'crs'...
    No checks registered for this product.
    and run cluvfy stage -post crsinst -n all -verbose,it show message:
    Result: Node reachability check passed from node "DB2".
    Result: User equivalence check passed for user "oracle".
    Node Name CRS daemon CSS daemon EVM daemon
    db2 no no no
    db1 yes yes yes
    Check: Health of CRS
    Node Name CRS OK?
    db1 unknown
    Result: CRS health check failed.
    check crsd.log and show message:
    clsc_connect: (0x143ca610) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db2_crs))
    clsssInitNative: connect failed, rc 9
    Any help would be greatly appreciated.
    Edited by: 868121 on 2011-6-24 上午12:31

    Hello, it took a little searching, but I found this in a note in the GRID installation guide for Linux/UNIX:
    Public IP addresses and virtual IP addresses must be in the same subnet.
    In your case, you are using two different subnets for the VIPs.

  • Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

    Hi,
    I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
    Anyone else had problems or success with this?
    Thanks in advance.

    9thdoc wrote:
    I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
    Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
    You need the Snow Leopard installation disk or a replacement for it.

  • Getting an "installer failed to initialize" error when installing CS5 from CD

    Getting an "installer failed to initialize" error when installing CS5 from CD
    Mac OS X Version 10.7.5

    Try using the Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html
    If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    CS5:
    http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  • My app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

    my app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

    HI ..
    The only way to reinstall OS X on a Mac already running v10.9 is to use OS X Recovery.
    Starrtup your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities to repair the startup disk and reinstall OS X.
    Please read >  OS X Recovery

  • Plug ins for adobe after effects failed to upload, please re-install.

    Yesterday 1/21/15 when I started up adobe after effects I got an error message that said plug ins failed to upload, please re-install plug ins.  I am on a PC windows 8.  I am a subscriber to after effects and have been for more than a year.  This is the first error I have encountered. Can anyone tell me where to find the plug ins and how to install them?
    Thanks,
    Shannon

    Sorry, I was at work, now I am back at my computer.  This is the error..sorry it picked up the picture from the other monitor, of course I never tire of the grand

  • Error. This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again.

    When I try to install GuideGuide extension this error message popups " This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again."
    Photoshop CC

    Hi,
    Have you ever uninstalled Photoshop CC and installed Photoshop CC 2014, or uninstalled Photoshop CC 2014 then installed Photoshop CC?
    If that, please re-install you uninstalled Photoshop, and remove GuideGuide from Extension Manager before uninstall.
    Another option is remove extension manager database file, then launch Extension Manager to install it.
    C:\ProgramData\Adobe\Extension Manager CC\Configuration\DB\ExMan.db (Windows)
    /Library/Application Support/Adobe/Extension Manager CC/Configuration/DB/ExMan.db (MAC)
    But please notice that all your previously installed extensions will not be shown in Extension Manager after you removed database file.

  • I'm on Vacation with no access to my Mac.  But had tried Sync. My software update is iOS 6.0.1. I've tried another WiFi network.  I read your comment of deleting Apps for stuck update. So removed all Apps! Can't even install Free Apps. Now using my Kindle

    I'm on Vacation with no access to my Mac.  But had tried Sync. My software update is iOS 6.0.1. I've tried another WiFi network.  I read your comment of deleting Apps for stuck update. So removed all Apps! Can't even install Free Apps. Now using my Kindle

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • I purchased a new camera with an Adobe Photoshop Lightroom 5 disk.  I have a windows pc with windows 8.1.  I have downloaded and removed about 5 times.  It says installed correctly but every time i hit the icon the pc freezes and I have to reboot  HELP

    I purchased a new camera with an Adobe Photoshop Lightroom 5 disk.  I have a windows pc with windows 8.1.  I have downloaded and removed about 5 times.  It says installed correctly but every time i hit the icon the pc freezes and I have to reboot  HELP

    uninstall your lr 5.
    install lr 5.7.1 and use your serial number to activate.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • PS or LR ACR 7.3 will support the D800 raw files, how do you remove ACR 7.3 so you can install ACR 7

    PS or LR ACR 7.3 does not support the D800 raw files, how do you remove ACR 7.3 so you can install ACR 7.1 ?

    Mylenium wrote:
    Uninstall PS/ LR completely and reinstall from the original media/ download. Run the Creative Suite Cleaner Tool if necessary.
    Mylenium
    Not so, Mylenium. It's relatively quick to downgrade Camera Raw with a download and a bit of fiddling. See http://forums.adobe.com/thread/1143545

Maybe you are looking for

  • ITunes 10.6.1.7 stops working in Windows 7

    Starting iTunes with my existing iTunes library crashes. I can start iTunes with a new (empty) library and it does not crash. If I try to add any music (Add file to libarary) or go to iTunes store it crashes ("iTunes has stopped working"). I have tri

  • Do I build my site in Edge or Muse?

    I am new at this and don't know anything about writing code. I am using PhotoShop CS6, Edge, and Muse to build a website. I have built a 60 second, interactive home page but I don't know how to make the navigation buttons work for other pages that I

  • Temporary file Generation issue - file Receiver Adapter(NFS)

    Hi Experts, We are using Dynamic Configuration for generating the Dynamic File name as per the requirement in the File receiver communication channel with transport protocol NFS. As, per the requirement we need to use the "Use Temporary File" in writ

  • Flash CS4 Link to a printable pdf file

    First of all, I am having trouble importing a pdf file into my Flash CS4 project's library. I need assistance making a link to a pdf file that is not currently on the internet. That is, the end result I am looking for, is for someone to mouse click o

  • IPTC Metadata not appearing in 'Get Info' - exported JPG?

    I've just exported a bunch of images (versions) from Aperture to JPG.  I have selected 'Include Metadata' and yet when I open the image and select 'Get Info' the only info being displayed is the info of least importance (to me, with these images), su