Removing a frame

Hi,
Couple of NEWBIE questions related to selecting frames.
Sometimes, I select start and End point of a sequence by pressing I and O in the viewer. It looks fine when I play it there, but sometimes when I move it into the timeline it shows also another frame (usually the one before the Start) is imported.
I can I avoid it?
Is there any keyboard shortcut to remove a single frame from a sequence?
Thanks.
Patrick

Surely the easiest way to remove a single frame on the timeline is-
1. place playhead on frame to be removed.
2.just press I and O to mark In and Out (you don't even have to move the playhead forward a frame or zoom in to the timeline).
3.press backspace.
Obviously, the appropriate Auto Select tag would be highlighted on the timeline so you get the correct track if there are layers of video...
I suggest zooming right in to the playhead and observing in detail what actually happens when you press I and O, and how they relate to the position of the playhead... this would also give a hint towards the OP's problem.

Similar Messages

Can Compressor 4 remove duplicate frames?

I have some videos which were converted to 30fps from a lower frame count. It was obviously a simple conversion that duplicated frames as needed.
The problem is, when I use these videos for slow motion, the duplicated frames cause the slow motion to "pause". In order to fix this, I have to remove the duplicated frames (obviously I don't care about sound, and I don't care about time sync). Once the duplicated frames are removed, the slow motion is nice and smooth.
In the past, I've always done this with very short clips, so I can do it manually. I open the video in QTP, advance one frame at a time, and when I see a duplicate, I delete it. Since there's always a pattern, depending on what the lower frame rate was, this can be done reasonably quickly, for very small clips. But it's obviously a tedious process.
I was wondering a few things:
1) Can Compressor 4 fix this issue for me? I've tried a few things in Compressor, but no help yet. I'm just a relative newbie, so that's not surprising.
2) Are there any other utilities that might help? Something that removes duplicate frames, for example?
3) These clips were already converted when I received them. However, in the future, when I convert a lower fps to 30fps for the purposes of doing slow motion, how should I do this in Compressor so as to have smooth slow motion at 30fps? Again, I don't care about audio.
I've done a few days worth of searching, but I still havent found the answers. Any help will be appreciated.
Thanks!
Dan

The Reverse Telecine didn't remove the extra frames. Who knows - maybe the frames aren't exact duplicates, although for the most part, they look it to the naked eye, which I realize doesn't mean much.
Oh well, doing it by hand isn't the end of the world. I've probably spent more time trying to figure out an automatic method, than it would have taken to do it by hand. But of course, I'm sure I'm not the only one who's ever done that...
Thanks for trying. As I've been searching for help on other things, it's amazing how many times one of your posts helps. So you've helped me plenty, for which I thank you.
Dan

How to remove the frame from an ActiveX Web Browser window

I'm using a web browser window to display content from a web application in my LV front panel. I'd really like the content to appear as native parts of the front panel rather than being inside a frame. Is there a method that will allow me to hide or remove the frame from the ActiveX control? I've tried to make it a custom control and edit the decoration out but that does not seem to work.
Solved!
Go to Solution.

Quite right, in my 8.2 the web browser is already borderless (probably transparent). If your web browser window doesn't look good you should be able to insert it into the activeX one, the other should be a special case.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Task bar remove the frame box

How can I remove the frame box in the taskbar with the frame still visible?

You mean the in Windows next to the start menu? You can't unless you can do it with JNI and native code. Or use Window/JWindow and draw your own frame decorations (titlebar, icon, control buttons, etc.).

Removing Outer Frame

I dont actually have a problem, i was just thinking
is it possible to remove the frame that surronds the GUI
I mean the one with the minimize, maximise, close button and title bar at the top.
the reason im interested is because i was thinking of changing the shape of the widow (rectangles are boring) and that bar is only suitable for rectangles
i wasnt sure what catergory this came under so if i put it in the wrong one then im sorry, and i like the new forum look when was it changed?
thanks

use C#...
or download this guy... sourceforge.net/projects/skinlf , but I was trying it out and it didn't look too good. so use C#

How do I remove residual frames at the beginning and end of a video?

I'm making a short clip with black slugs at the beginning and end. But there are two or three residual frames from the incoming clip after the black clip that stay at the beginning and end of the video and I can't remove them. I've tried trimming the beginning and end of the video several different ways, and the frames won't disappear. They stay in the video when I make a DVD. The very first and very last frame have sprocket holes in them on the edge of the frame. I'm baffled. Is this an artifact of using the trial version?

chances are they are from a fade. have you zoomed in really really close and checked if there is a small fade in or fade out? happens to me all the time, and with the fade out, you can't do anything to fix it (that I've found) except replacing the clip from your Browser. See my similar question here:
https://discussions.apple.com/thread/3589714
Hope that helps.

Remove blank frame in swf file?

Hi. I made a simple swf file in flash lite 1.1 with clock. But when i open it after publishing, it has that ''blank frame'', which is refreshing constantly and flikrers between my image and white background. Does anyone know how to remove it, and/or how to insert my image into the stage without being that blank frame visible? I use macromedia flash 8... In case someone wants to look at it, heres the code i used to create the clock, and my swf:

Ok, i'll try to explain. When you open Macromedia Flash, it automatically creates white stage/document. But i dont need it, so i import my own image to the stage, then i make that clock and publish swf file. Then when i open swf it blinks between white frame and my image. So im pretty sure this white frame is that white stage, created at the beginning. I just dont know how to get rid of that whit stage before i open my image, or maybe i just import my image in the wrong way, i dont know. And, no, it doesnt affect the clock, its working fine, except that it never shows the right font (if i create clock with lets say Verdana, when i open swf its always Arial). About code, i found tutorial by google, that tutorial gives me that code. I have no idea how its made and whats wrong with it, im just a beginner and trying to learn all that stuff. I attached swf in my first post. Thank You.

FCP5 removes last frame from any 23.98fps movie

I'm having an issue with 23.98fps Quicktimes in FCP. When I play the clip in Quicktime, the frame count is correct. When the same movie is opened in the FCP viewer or dropped in a bin, FCP removes the last frame. For example, say I have 2 clips, identical in every way except for frame rate:
Clip A - 720p Photo-JPEG 120 frames 24fps
Clip B - 720p Photo-JPEG 120 frames 23.98fps
In QT7, both clips play correctly, contain all frames, and are reported in the info window to be 5 seconds exactly. In FCP Clip A, plays correctly, contains all frames, and has a reported length of 00:00:05:00. Clip B is missing the last frame and has a reported length of 00:00:04:23.
I have done this same test with a 480 frame clip as well with the same results. QT7 reports 20 seconds, FCP reports 00:00:19:23.
I have had this problem with quicktime movies from different sources as well, not just QT movies I have created. It is imperative that I find out what is causing this issue. If anyone can offer any suggestions/answers at all, it would be much appreciated.
PowerMac Dual G5 Mac OS X (10.4)

hello anthony.
i can't offer any explanation, but i can offer what might be a work around. i am assuming you need to work at 23.98 and that you are receiving exact frame count files.
if you receive files @ 24fps which are correct, try using cinema tools to "conform" these files to 23.98 ... just open the file from within cinema tools and hit the conform button. i'd be interested to know if these conformed files maintain the correct frame count.
a guess might be that the export or transcode process might be the source of the error.
R.

Removing text frames from rdf export format

After a report has been exported in rdf format, can anyone tell me if there is a way to remove the text frames from the document, so that the formating is retained but by using word's tabs etc.
Our client needs to manually add sections to the document after the report has been generated and we find that because of the text frames the document formatting gets ruined when new sections are added to the file.

I don't know whether any of this will help?
According to the manual there are only a very limited range of adjustments you can make to iMovie projects.
Turn iMovie adjustments on or off
When editing a project in iMovie, you can adjust several video attributes, such as exposure, brightness, and saturation, in the Project Browser. If you import an iMovie project that has these adjustments into Final Cut Pro, the adjustments are retained and appear in the Color area of the Video inspector as an iMovie item.
Although you cannot modify the adjustments added in iMovie, you can choose whether they are applied to the clip or not.
Note: Video adjustments you make to clips in the iMovie Event Browser are not retained and do not appear in Final Cut Pro.
Turn a clipʼs iMovie adjustments on or off
In the Timeline, select a clip with iMovie adjustments applied, and select or deselect the iMovie checkbox in the Color area of the Video inspector.
Note: The iMovie adjustments appear only in the Timeline, not in the Event Browser.

How can I remove the frame?

(i'm using iTunes 12 on Yosemite)
How can I delete this annoying frame/ change it back to the normal look??? (command-i; song/album information)
My iTunes:
http://imgur.com/bmRh11n
Normal iTunes:
http://imgur.com/cgMeTdC
Thank You!

Hello Styrman,
The help document linked below details how to manipulate tables in Pages for iCloud beta, which includes adding and removing rows and columns.
Pages for iCloud beta Help - Add, remove, resize, and arrange table rows and columns
http://help.apple.com/pages/icloud/1/#/gila327dd07c
Cheers,
Allen

How to remove the frame decoration of a InternalFrame

Hi,
Can I easily remove the decoration of an internal frame?
I know only the JFrame.setDefaultLookAndFeelDecorated()
method. It seems that there is nothing simillar at the JInternalFrame.
regards,
Olek

camickr wrote:
Well the point of using JInternalFrames on a desktop is so that you can minimize/maximize and drag then around using the decorations. If you don't want the decorations then just add a JPanel to the desktop.Yes, but I don't like the style of the decoration ... is there an other way than to create an own UI?
Olek

Removing faulted frames in a video

Hi,
I have a video recorded from a conversation by Fraps. However, the video is blinking please check these 2 frames:
http://i.imgbox.com/advDizY4.jpg (good frame,sensored for privacy, sorry about that)
http://i.imgbox.com/abfLJ77o.jpg (error frame)
These 2 kinds of frame keep alternating so as a result, my video is blinking.
I guess the faulted frame is because of the framerate number (the red number shown at the bottom left). Is it possible to remove all of these frames in after effect?
Is it possible to use some kind of mask to remove them? I am dont know much about masking so if anyone confirm, I can learn it.
Thank you for your help.

If they occur at regular intervals, a simple footage interpretation change will suppress them, i.e if you have a 30fps comp, setting the footage to 15fps and then doing a time stretch by 50% will effectively hide every 2nd frame...
Mylenium

How do I remove the frame that pops up around boxes I can type in?

I am new to MAC,
For exaple: When on Face book a black frame pops up around the serch box at the top of page and if I scroll down reading post say at the bottom of the page and there is a pic i want to see when I click on it I dont see the pic it flips all the way back to the top of the page where the frame was then I scroll all the back down to the pic click on it again I now can see the pic, any one help? this frame or box may not be the issue.
Thanks
Toddr111

If you have a pascode on your iPone remove it or unlock it prior to conneting to your Mac
This computer is not a computer
Exactly what do you meant with this statement?
LN

How can I remove black frames on both sides of the clip?

Here you can the see the frames on both sides of the picture. They remain the whole video and I want to remove them.

Start by being sure that your project matches your video
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086

Remove last frame after live stream

Hi,
How can I remove/reset the last frame sent by a live streaming client? I'm using FMS 3.5.
It can be a server or client side solution. any ideas?
tks.

Hi,
What do you mean by removing the last frame from live stream?
A live stream that is published to the server and there is a client which is subscribing to that live stream. And you dont want to send the last frame of the stream to the subscriber, is it? Or something else?
Regards,
Janaki L

Premiere Elements auto removing black frames?

I edited a file in Premiere Elements, inserting 15 frames of black at stratgegic points, and exported as Quicktime. I then ran the resulting file through a professional transcoder to convert to an MPEG-2 transport stream. When played back on an MPEG player (i.e., VLC) the .5 sec of black is where it's supposed to be, but if I reimport it back into Premiere Elements the black frames are mostly removed (2 out of 15 remain at each point). Why does it do this and how to prevent it? (I imported the MPEG back into Premiere to verify that there was no drift in the timeline caused by the export and transcoding process, since the black frames need to be synchronized with an ad inserter, but Premiere is removing the black frames.)

Did you Import the MPEG-2 Video? If so, it's most likely a GOP thing, when PrE internally converts to I-frame for editing. For a bit more background on GOP, see this ARTICLE.
I hope that is all that is happening and good luck,
Hunt

Removing a frame

Similar Messages

Maybe you are looking for