Removing a head with lightroom 4

I have several pictures from a dance recital. I have the top of someones head in many of the pictures. I know photoshop had a tool that would sample the surrounding part of the photo to mask what ever you wanted removed. Is this possible lightroom 4

It might be possible with the spot removal tool, but I'm sure the results would be better in Photoshop.

Similar Messages

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo.

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo. Is it possible to simply delete this blue color of the sky?

Make your selection and then use Refine Edge.
See this video tutorial from Bob Gager.
https://www.youtube.com/watch?v=xrl3Qwg6zSc

Removing the header and footer in Pages

I just began to use Pages after purchasing a new ibook. In AppleWorks, headers and footers were never inserted by default. In Pages, how can I remove the header and footer in Pages so I can have more space for the body section of the document?

I had already set page margins to zero, and I disagree with you: Headers and footers still appear with a height of approximately 1/8 inch.
SInce I posted my previous message, I have experimented a bit. I was able to (almost but not quite) totally eliminate the header and footer by clicking into the header and footer area and reducing the font size to the absolute minimum. After having done that, the body was basically in-line with 0" on the vertical page ruler.
Also, in my opinion, whether or not most printers do a full page bleed is irrelevant. I should be able to work with the page body without its being offset from the page ruler if I don't want to employ a header or footer.
Rusty

How to remove the header in Report from SQVI

Folks,
I created a report by joining 4 tables in SQVI, the output data is around 200 pages. I need to remove the header from the report so I can down load to a excel.
Can some tell me how to switch of the header in SQVI ( Layout Mode). I did this before using Legend on/off but I quite didn't remember how I exactly did it.
Thanks,
Kumar

Hi,
It is not about the thing that, whether your source is XML or flat file. If you dont want some thing in your source file , dont consider it and dont map it with your target structure. think that, your not getting the header in your source. What is the header here.
<Emp_details>
<Emp_Id> Employee No </Emp_Id>
<Emp_Name> Employee Name </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 1234 </Emp_Id>
<Emp_Name> xxxx </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 5678 </Emp_Id>
<Emp_Name> yyy </Emp_Name>
</Emp_details>
you have two fields under node Emp_details. What do u want to avoid here?
Regards,
Reyaz

Synching comments with Lightroom/Smugmug

I have been in discussions with a developer at Smugmug about a problem I'm having with the Publish module. When I publish even 1 new photo to Smugmug, the process first publishes the photo, then syncs comments. Lightroom takes FOREVER to sync comments.
For example, I have a gallery with 46 photos in it. It's a private gallery, and the person depicted has left comments on about 1/2 the photos. I am trying to sync these comments with Lightroom, then remove the photos from Smugmug that have no comments, and then change the gallery to public so she can share it. I started the sync about 20 minutes ago[1], and the progress bar is less than 25% of the way across. I only have 3 galleries on Smugmug that were Published from Lightroom at this time, and I'm publishing from a Lightroom catalog that only has the last 6 months of photos in it - not my master catalog that has photos going back to 2000.
There seems to be a very poor method of communication between Lightroom and Smugmug about which photos have new comments on Smugmug. The Smugmug developer says he is limited in what he can do with the SDK functions he can access. He writes:
Unfortunately, I am constrained by the LR SDK in many ways and retrieving comments is one of those cases. Within the method in LR that requests comments, I have no access to the publish collection that they are contained in, so there is no way for me to easily grab all the image comments for a given album. I know how painful this process is, and I have tried to tackle the problem from a number of different ways. I have made some requests to the LR development team to improve this, but I doubt we'll see anything until LR4.
I'm quite concerned about his belief that you won't fix this in the current 3.x release. Please fix this in 3.x! IMHO it's a really poor business practice to force users to pay you more money (e.g. to pay for an upgrade) to get a fix for serious usability issues in a current program. Upgrading should be something users gladly do to get new features, not something users reluctantly do in order to get something fixed that was badly broken in the previous release. The former has been (until now) Adobe's practice, the later has been seen far more often in Microsoft's practice. Please don't emulate Microsoft's practice here!!!
jc
[1] Is there a log file I can look at to determine exactly how long it takes to sync comments?

As the developer in question, I'm adding some additional technical info.
Unlike the majority of other methods related to PublishedCollections in the LR SDK, the method for syncing comments (publishServiceProvider.getCommentsFromPublishedCollection) doesn't actually provide the PublishCollection instance as a function argument.
The method provides an array of PublishedPhotos for the PublishedCollection, but the LR SDK doesn't provide any way to determine PublishedCollection given a PublishedPhoto that is contained within it.
Given that there is no way (that I am aware of) to derive the PublishedCollection that these PublishedPhotos are contained within, I have no option but make a single request to API for each image to retrieve the comments, which could result in hundreds of API calls where I could achieve the same thing with a single API call if I had access to the PublishedCollection object.

Edit in external editor with lightroom adjustments issue LR5 and PS CC

Since several days when I try (in Lightroom) 5 to edit an adjusted file (NEF, JPEG or TIFF) in Photoshop CC as external editor (with the option "edit a copy with lightroom adjustments") in many cases the adjustments ar not visible in photoshop CC, or only partial visible, and sometimes the file opens not at all. Removal of the preference files of LR 5 and PS CC and a whole new installation of LR 5 didn't resolve the issue. I have a macbookPRO with Mac OS 10.8.5 and the most recent versions of LR 5 and PS CC. Has anyone experienced this problem and what can be a solution.

I have no idea, but have you tried File / Catalog Settings/ General tab: Relaunch and Optimize. Relates to the database.

Issue using Photoshop together with Lightroom - "Could not save because..."

I have a really annoying issue with Lightroom and Photoshop CS3. When I use Photoshop as my external editor for Lightroom, Photoshop opens up nicely and I am able to edit. However when I go to save I get the following message "Could not save because the file is already in use or was left open". The only way I'm able to save then is to shut down Lightroom. Then I can save in Photoshop and after that I launch Lightroom again to continue working in there.
I don't know if this has anything to do with this issue, but I do have all my images on a network drive which I access exactly the same way as any external drive.

Online chat with Adobe staff member helped solve the issue.
A corrupted preferences folder was removed, a new one automatically created solved the issue.
New folder was then deleted and old folder reinstated with the original name (if that makes sense).
Sorted.
THANK YOU Gokul!

How to remove the header tag in the XML data ?

Hi All,
I am sending an XML data from SFTP to Proxy, in that I want to remove the header tag (first tag) from the xml, while loading the data. how to do that ?

Hi,
It is not about the thing that, whether your source is XML or flat file. If you dont want some thing in your source file , dont consider it and dont map it with your target structure. think that, your not getting the header in your source. What is the header here.
<Emp_details>
<Emp_Id> Employee No </Emp_Id>
<Emp_Name> Employee Name </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 1234 </Emp_Id>
<Emp_Name> xxxx </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 5678 </Emp_Id>
<Emp_Name> yyy </Emp_Name>
</Emp_details>
you have two fields under node Emp_details. What do u want to avoid here?
Regards,
Reyaz

Remove DataGrid Header Separator dynamically

Hello,
Scenario: I have a DG with 3 static columns and many dynamic columns added at run time.
I want to have one and only one header for all the dynamic columns.
In a way it can be seen as multiple datagridColumns (without headers) in a single dataGridColumn (with only a header). Now there is a heavy traffic between static columns and the dynamic columns. So I dont think it is possible to have two different DG's.
My Attempts: I tried to use the HeaderSeparatorSkin to remove the header separators so as to give a feel of one single header. But since the headerseparatorskin is removed at DG level it can be either removed for all columns or for none.
My Question: I will have to create a custom DG so as to draw separator skin for few columns and remove for others. But I am not sure how can I do that since using "headerSeparatorSkin" removes it for all columns. Can some one show me a path as to how I can accomplish this?
A very bad way of accomplishing the above is to remove all the header separator skins and then use headerRenderer for the static columns to show a line similar to separator skin. But that is a bad way of coding I guess.
Thanks in advance,
Bhargav

Thank you for the reply Flex harUI.
If I understood right the renderer will extend a DG and will have columnns and only one row. But the row color will not match the the row of the main DG.
Secondly I have using a checkbox renderer to be displayed in the columns created dynamically. The data of this renderer is changing with users interaction. Thus I am not very sure if implementing a renderer inside a renderer should be a good idea.
But I will try and use your suggestion to see if it can be used for my implementation.
Thanks again,
Bhargav

Raw files imported distorted with Lightroom 3

Hey,
In the last months I started experiencing an issue with Lightroom 3 (is the software that came with my camera) that didn't have at the beginning and AFAIK nothing has changed after I isntalled the lastest version of lightroom 3 and the camera raw plugin.
Recently pretty much every picture I import comes with shifted bands. I know the raw files are ok because other computers load the file correctly. You can see in the car wheel the kind of shifting I am suffering.
Exporting the file to a different format will save the file with the distortion, so it is not just visual.
In all honesty, I don't know how to tackle this, I tried to install any possible updates for camera raw which didn't work and I fear that reinstalling the software might not work or just do temporally till it breaks again. Any tips will be greatly appreciated. Thanks!
Message was edited by: hitonme

When you compare the files on other computers and they are ok, are you reading them onto the second computer from the camera memory card in a card-reader or USB-cable attached to the camera, or from some other step further along in the transfer process, such as from one computer’s hard-drive to another?
Anything that happens after the last shared step is suspect.
If you are reading them from the memory card again and they are ok on the second computer, then what happens if you copy the photos, again, onto the first computer? Do the same ones have the same faults in the same locations or are the faults different? If the latter, then something in the transfer process (USB drivers/cable) or the computer, itself (memory, hard-drive), is bad.
If you remove and re-import the files do they still have the same faults in the same locations? If you purge your camera-raw cache and re-develop do the same faults show up? If not then perhaps wherever your raw cache is, is corrupted.
If you want you can try posting one of the files that has been imported into LR and is bad, here, and others can try it on their systems, to make sure the data in the file is bad.
By “posting one of the files” I mean upload it to a large-file-hosting service like www.dropbox.com and then post the public download link, here.

Can you export a raw file photo with Lightroom adjustments attached?

Can you export a raw file photo from Lightroom with Lightroom adjustments attached in some way? If not what is the equivalent? There are some individuals I would like to send the full data of the raw file, but with the non-destructive Lightroom adjustments layered on top.
--Gerry

You can select "Original" as the file type, in Export. This saves out a copy of the imported source file into the selected location, labelling the current adjustments onto that image. When this is sent to somebody and imported to LR / opened in ACR, these metadata will be found and used automatically, with the exact same outcome as within your own LR Catalog - provided the LR / ACR versions are sufficiently compatible, and provided camera and lens profiles applied to the image, are present in both contexts.
LR uses whatever method is normal when writing metadata, for each file type involved. So, if one imported file is a proprietary Raw file, LR will write an XMP file alongside. If another is capable of having metadata written into its file header, LR will do that instead.
One important difference between doing this, vs writing LR metadata out to your original imported file, and sending that: the Export Original method will work in the same way, just as successfully, for one or more Virtual Copy versions (duplicating physically as needed), as it will for the primary Master version - relating to a given imported file.

Removing columns heading for a perticular page in ALV list display

Dear All,
For last page of my ALV list display i need to remove columns heading (Strictly for single page only).
Kindly help me with possible solution.
I am triggering page break by using group attribute in the sort catalogue.( l_v_sortcat-group = '* '. )
Best Regards
Ravishekar Thallapally

if u can catch the page number,
while building fieldcat, put the condition
if sy-page = (page number)
ls_fielcact-fieldname = fieldname.
ls_fieldcat-tech = 'X'.
LS_FIELDCAT-NO_OUT = 'x'.
modify lt_fielcat from ls_fieldcat.
but how r u catching page number?? can u pls tell
endif.
Message was edited by: Hymavathi Oruganti

How to remove the header name in KM navigation iview

Hi,
I have an KM iview with linklistexplorer as layout.
It is displaying "Name" as header along with all the files.
I want to remove this header "Name" from the iview.
Can anyone help me on this.
Raghu

Hi Raghu,
The layoutset you are referring to is using the collection renderer LinkListCollectionRenderer. This defines the properties to be rendered for each resource, which in the standard are
"rnd:image,rnd:displayname(contentLink)"
Change this to
"rnd:image,rnd:displayname(contentLink/noTitle)".
See http://help.sap.com/saphelp_nw70/helpdata/en/79/a1d23e6b2c3d67e10000000a114084/frameset.htm for an overview over these modifiers.
Hope it helps
Detlev

Remove response header

Hi,
Can anyone please show me how to remove a header from a servlet response? I use tomcat so if tomcat special features needed can be done with it... Can anyone please show me a small example of how to do it?
10x
Tomer

A response is worthless without a header.
What exactly do you want to do finally?

Howto proces SOAP Header with security info

My incoming Soap messages contain security info in the soapenv:Header part.
However, I only need the contents of the Body element.
If I do NOT handle the Soap Message, then an Exception is thrown: something like: 'Do not know how to handle MustUnderstand'.
So something must be done with the Security info in the header, but I do not know how. Do I have to remove the header completely in the Soap handler, after checking the singning? If somebody can point me to some examples of Soap header processing for this case it would be helpful.
kind regs.
Harry

Hi Harry
The header in Soap Messages is optional. Is is used to carry security information, that is security on the level of the Soap message. So when the header of an incoming Soap message is 'handled', the header is of no use any longer and can (must) be discarded. Indeed discarded, because the rest of the handlers don't expect a header in the Soap message. They extract the 'contents' from the body of the Soap message, and deliver that to you backend system.
I will describe the header handling in the webservice: to get access to the Soap message in your code, you have to write a 'handler' Class. This Class should implement the Handler Interface or extend the abstract GenericHandler Class. To handle only the incoming Soap messages, the 'Requests', the method 'handleRequest' should be implemented. This handleRequest method has 1 parameter (mc) with type MessageContext. This parameter contains the original Soap message in Object format. You can access the original header information via:
SOAPMessageContext smc = (SOAPMessageContext)mc;
SOAPMessage message = smc.getMessage();
SOAPPart part = message.getSOAPPart();
SOAPEnvelope envelope = part.getEnvelope();
SOAPHeader header = envelope.getHeader();
With: Iterator iterator = header.getChildElements();
you can navigate through the header elements and do whatever you like. If you decide that security info in this header does not match the contents of the body for instance, you can issue an Exception and log it.
After processing the header you have to discard it with:
header.detachNode(); and let your handleRequest method return 'true'.
The rest of the webservice processing takes the contents from the body element, and delivers that to your application.
To let you webservice make use of your Handler, you have to name it in the web-services.xml as follows:
<webservices>
<handler-chains>
<handler-chain name="myChain">
<handler class-name="a.b.c.MyHandler" />
</handler-chain>
</handler-chains>
<web-service name="MyService">
<operations>
<operation ... handler-chain="myChain" .... />
</operations>
When the webservice 'MyService' gets a request, the handler 'MyHandler' is automatically invoked. you can have more handlers in a chain. Also you can declare more chains in your <webservices> section and refer to them from the <operation> elements.
Items of interest:
javax.xml.rpc.handler.soap.*
javax.xml.rpc.handler.*
javax.xml.namespace.*
javax.xml.soap.*
May be this of use for you :).

Removing a head with lightroom 4

Similar Messages

Maybe you are looking for