Removing a User From SAP and Webtools

I have recently removed a user from SAP which was a user from webtools
i removed their license and removed them from webtools
My issue is that i now have a Sync Error
-10:Selected user was deleted
   at NetPoint.SynchSBO.WebToolsChildObjects.AccountUser.SynchOUSR(NPUser u)
   at NetPoint.SynchSBO.WebToolsChildObjects.AccountUser.NetPointToSBO(NPQueueObject qData)
   at NetPoint.SynchSBO.SynchObjectBase.Synch()
What can i do to remove this error?
Please notify.
all answers and suggestions will be greatly appreciated

User probably still exists in WebTools. Try to find & remove it.
If this doesn't help, you can remove user from synchronization queue:
1. run SynchManager
2. on page Synchronization click on tab Web tools Queue
3. find row with 'Name' equal NPUser; click on number in column 'Fail'
4. select row containing error message
5. press <Delete>
6. run synchronization

Similar Messages

E payment should be enabled so that the user could make payment directly from SAP and after the payment is verified ,approved and authorized by the concerned users responsible the payment should be electronically transferred to the payee's bank account th

E payment should be enabled so that the user could make payment directly from SAP and after the payment is verified ,approved and authorized by the concerned users responsible the payment should be electronically transferred to the payee’s bank account through our bank.

Thanks,
I usually use the OS connection option. So as you suggest, connect without the ISP connection software. Doing so does not by-pass the sudo command being active in Activity Monitor however.
On reading my post I see my failure to link the concerns of the laptop purchase with the sudo and modem. My thought here is of an intersection of known vulnerability with this widely used modem/software (via permanent sudo process activated) and that vulnerability then being known and utilised by another party(s).
I am pursuing the issue in part with consideration to a broader possible issue of vulnerability.
Thanks again for your thoughts and suggestions. Valued.

Trouble removing a user from creative cloud for teams

I am trying to remove a user from my team, however the X does not show the pop up menu with the option to remove them. Also, when I click on any item on the left hand menu, nothing happens.

Sorry... This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

How to tranport the users from SAP R/3 to portal ?

Hi All,
I had connected to SAP R/3 system from portal. I am trying to tranport the users from SAP development server . So that everyuser can enter through the portal only and work on SAP.
Please guide me the procudure how can i tranport the users from SAP system to portal.
Please urgent replies are appreciated .

Hi Abhishek,
Thanks for your information.
please let me tell you the detailed information. My basis guy had configured the system for me as i didnt have any idea on installation procedure. So i am facing th e fallowing problems.
 First Problem
I am not able to create the user from portal directly. Its showing the fallowing error.
An error occurred in the persistence; contact your system administrator.
so i had created the users in WAS by SU01.
Second
We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
If u dont mine Please provide with me the steps to fallow
Third
i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
Its showing the error
Could not able to look up the system.
And the problem with user mapping also .
For aministrator its working fine .and for a general end user ( created on WAS )
i am not able to provide user mapping. Its showing
There are no systems available for user mapping for the selected principal
wat could be the problem ?
Your solutions will be appreciated .please urgent

Shared Services 11.1.2 Unable to remove assigned user from a security group

In Shared Services 11.1.2 - trying to remove a user from the assigned users list of a security group. Initially, I am able to remove the user and the assigned users total decreases by one - but when I relaunch the group properties - this user is still in there? The change does not hold. Any suggestions would be appreciated - thanks,
Paul

Hello Paul,
Not sure if this is related to yours, but it might be worth having a look at the following articles on Oracle support --
External users in EPM Shared Services (e.g. MSAD users) cannot be removed from Native groups if they have multiple IDs in the external user directory. [ID 1526569.1]
Users from External User Directories Cannot be Removed from Native Groups [ID 1272309.1]
Thanks,
hyperionEPM
Please mark answers as correct or helpful for others to find them easily.

How to delete users from Dev and Testing once it is deleted in Production

Sap Gurus,
Is there any automated way to delete the users from development and testing once it is has been deleted from production. i.e. when the administrator deletes the user from production after logging in then it should automatically delete the users from testing and development without logging on in these 2 systems (development and testing). Can anyone help me in resolving this issue.
I am very much thankful in advance..
Regards,
Kali

Rob,
Ok, you are right in that way I can allow only that person but I have to allow 2 persons at this time. i.e. If at all I have to allow one more person also how should I do it, and also what if the person uses different passwords in development and testing?
Thanks for your response Rob.
Kali.

Good news! Removing "other user" from login screen.

I got a brand new macbook pro days ago. All are amazing, except the annoying "other user" on the login screen. I have googled and tried every possible solution such as disabling root user, changing user's name, deleting and etc.
Here is the 100% successful solution.
http://www.theseoinfo.com/how-to-remove-guest-user-account-from-login-screen-in- mac-os-x-10-7-2-lion/1673/
Hope this help you all guys.

Google for remove guest user OS X and be enlightened. Alternatively,

Removing Guest user from login screen

Can someone tell me how to remove the Guest user account from the ogin screen and what its login iD and Password? I thought this was not suppose to have a password so as to enable in the tracking of the Mac. I do not have the tracking enabled in my iCloud account and The Guest account is disabled. Can any one help anyone, any Apple tech staff out there?

Google for remove guest user OS X and be enlightened. Alternatively,

Can i recover my all active directory domain computers and users from IFM and in-cooperate them in new forest ??

My only Active Directory Server on win server 2008 R2 with one domain controller crashed today. The only backup that i had was IFM media.
So what i have done till now to recover it is a follow
I reintalled window server but this time it is winserver 2012. I added AD DS role to it. Promoted it to Domain Controller. (functionality level is 2008 R2)
On second server i installed win 2008 R2 and trying to add additional domain controller from IFM to recover all of my domain users,computers and GPO's. but i am getting this error
Could not replicate the directory partition CN=schema, CN= configuration, DC=XXX, DC=com from the remote domain
the naming context specified for this replication operation is invalid
i dont know weather my approach is correct or not
but my simple questions is
Can i recover my all domain computers and users from IFM and in-cooperate them in new forest ?? if yes how can i do that?? urgent help required.

yup exactly i created a new domain(in new forest) with same previous name in window server 2012 on SERVER-1. As ifm file that i had was generated from 2008 r2 so on second server i installed window 2008 r2 and tried to add role of additional domain controller
from ifm file on SERVER-2 using dcpromo /adv . every step went ok but in last step when it starts replicating domain controllers it poup following error
Could not replicate the directory partition CN=schema, CN= configuration, DC=XYZ, DC=com. . .
and roll backs every thing.

How to Extract Data from SAP and Load it into Essbase

Hi All,
Can you recommend some ways to extract data from SAP and load it into Essbase?. I have no knowledge about SAP, not sure how I can perform this task. Can I use ODI for this job?
Thanks

hi,
Not sure if this helps but give a try
you can create connection from EAS to SAP .. using a plug-in .. if you have access to oracle Support go for [ID 968961.1]
or
below are steps
1. In EASPATH\console, open components.xml in a text editor.
2. Under <PluginList>, enter <Plugin archiveName="SAP" packageName="com.essbase.eas.sap.ui"/> before the closing </PlugIn> tag.
3. Save and close the file.
4. In EASPATH\console\bin, open admincon.lax in a text editor.
5. Search for lax.class.path= and append ;..\lib\sap_client.jar;..\lib \sap_common.jar to the entry. Save and close the file.
6. In EASPATH\server\bin, open adminsvr.lax in a text editor.
7. Search for lax.nl.java.option.additional, and append -DRFC_INI=EASPATH\server\saprfc.ini. Save and close the file.
8. Create a new environment variable, RFC_INI, with a value of EASPATH\server\saprfc.ini
9. Copy librfc.dll andsapjcorfc.dll to EASPATH\server\bin. You may need to obtain these files from SAP.
let me know if it works :)

I want to see list of Disabled user from AD and LDAP

Hi
i wan see the list of disabled user from AD and LDAP and it shows in the next page as Tabular format
having all the details of AD (Attributes)

Hi
i wan see the list of disabled user from AD and LDAP and it shows in the next page as Tabular format
having all the details of AD (Attributes)

Restrict users from editing and deleting not owned items

Hello guys.
I'm trying to restrict users from editing and deleting items created by other users. I know, that it can be achieved by using SPList.WriteSecurity parameter, but if I change its value to 2 or 4 - nothing happens...
May be there are some list permissions that can override this security setting? I tried to combine permissions in different ways but users either cannot modify any items or can edit/delete all of them...
By the way, setting ReadSecurity=2 works as it should work regardless of user permissions...
Please help.

Hi,
I understand that you want to change the write security for the document library. You can try the PowerShell script below:
$web = Get-SPWeb http://serverURL
$list = $web.Lists["Document library"]
$list.ReadSecurity = 2
$list.WriteSecurity =2
$list.Update()
$web.Dispose()
This setting will not affect the site collection administrator, he will always be able to edit the documents. You need to sue another account to have a test. If this still doesn't work, I think you need to manually edit the permission for each documents.
Thanks,
EnTan Ming
Entan Ming
TechNet Community Support

Extract data from SAP and send to external system via Webmethods & IDOC's

Hi,
We need to Extract data from SAP and send to an external system via Webmethods middlewear using IDOCs. I have never used webmethods before and would like to know more about how to implement this scenario. I have used IDOCS in an EDI scenario before but not used it along with WebMethods.
Any pointers would be of great help. Thanks

If you have already ABAP programs /BAPI's in place then try to develop RFC interface and write some back ground programs to scheudl BAPI's and develop scenario but you need to implement error handling , data validation in PI mapping level.
or
take help from ABAPer to design in ABAP like writing Proxy program to pull data and send it PI.
if you are dealing with master data bit risky(correctness) but can be achived using PI.

Is it possible to prevent a user from creating and approving a JV

Hi,
Is it possible to prevent a user from creating and approving a JV. We have a rule that one user cannot do both. What happens is user#1 creates the JV, then some other user#9 approves the JV. Both user#1 and user#9 need to be able to create a JV and approve someone else's JV.
The transactions in question are...
F-02 General Posting - enter Journal Voucher (create & post)
F-65 Enter General Document - Parking (create)
FBV0 Post or Delete a Parked Document (approval)
Please let me know the details.
Thanks in advance,
regrads,
Chaks

Hi,
Requisition is submitted.....it means Requisition is saved or it means Requisition is Released..?
Regards,
manish

Exchange 2010 disconnect AD user from mailbox and reconnect the mailbox to a new copy of the same user with a different username

How can i get the following done:
Exchange 2010 disconnect AD user from mailbox and reconnect the mailbox to a new copy of the same user with a different username?
i nmust do this for 16 users TODAY, SO PLEASE HELP ME OUT HERE.
Thanks in advance!!
kind regards,
Rene Veldman
System Administrator Teidem bv, The Netherlands.

Rene,
Why are you not changing the username of the existing account, instead of deleting the existing one and creating a new one?
If you truly need to delete and create new, you can save the GUID for the mailbox (Get-MailboxStatistics <mailbox alias> | Fl MailboxGuid), mail disable the existing account (Disable-Mailbox <mailbox alias>
will work), clean the mailbox database it was hosted on (Clean-MailboxDatabase
<database name>), then create your new account and recover the existing mailbox to that new account (Connect-Mailbox -Identity <Guid from before> -Database <Database name> -User <SAM account name of new account> -Alias
<what you wish to set the alias to>). In PowerShell, for all steps, you would do the following:
$MbxAlias = <mailbox alias>
$NewMbxAcct = <SAM Account Name for new account>
$NewMbxAlias = <new alias for mailbox>
$DomCtrl = (dir env:\LOGONSERVER).Value.Substring(2)
$MbxGuid = (Get-MailboxStatistics $MbxAlias -DomainController $DomCtrl).MailboxGuid
$MbxDb = (Get-Mailbox $MbxAlias -DomainController $DomCtrl).Database
Disable-Mailbox $MbxAlias
Clean-MailboxDatabase $MbxDb
Connect-Mailbox -Identity $MbxGuid -Database $MbxDb -User $NewMbxAcct -Alias $NewMbxAlias -DomainController $DomCtrl
You will need to supply the information in bold in the above commands, and you will need to create the new account before you run the above commands. I include direct use of a specific domain controller so you won't need to worry about replication.
If you are changing the account from one domain to another, this will not help, and you will need to wait for replication throughout the process, running the commands individually.

Removing a User From SAP and Webtools

Similar Messages

Maybe you are looking for