Removing a Wlan connection

Can anybody tell me how to remove a wlan connection from my E51 phone?
I accidentally tried to connect to a neighbours wifi network instead of mine. Now, when I browse for an available network at home, the phone tries to connect to the neighbours network (that doesn't work) in preference to mine. In the phone's list of available connections, both our wifi and the neighbours wifi have the clover leaf symbol next to them.

Just go to tools->settings-.access points & delete what you think your neigbor's SSID.
Message Edited by android on 25-Mar-2008 01:47 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

  • N95-Continuous "Create WLAN connection in offline ...

    Hello All,
    I tried using the search and could not find anything on this.
    Up until now, i haven't had a problem like this. Upon turning on the phone, i keep getting the "Create WLAN connection in offline mode?" prompt. When i hit "NO", my phone resets! When i hit "YES", sometimes nothing happens and other times, the phone freezes up and then resets.
    I have WLAN scanning set to off by default. I held down the options button to check for any apps running in the background that may be causing this, but none are open. (Just the "Standby" icon is present.)
    Again, this just started happening. I have recently installed programs like Fring, Shozu, and TruPhone. I thought either Fring or TruPhone may have been the culprits so i removed them both, but the WLAN prompt --> restart issue is still present.
    I am curious if others have experienced this. My phone is still V 10.0.018.
    Please help! Any assistance would be greatly appreciated!Message Edited by adamyuki on 14-Jul-200704:50 PM

    I haven't had this happen to me, and I haven't seen any other reports in the forum.
    One thing you can try is to reset the phone using the instructions you can find in this post :
    /discussions/board/message?board.id=smartphones&me​ssage.id=4007
    However please be aware that doing so will wipe ALL the data from your phone such as information in your calendar, contacts and so on.
    In order to save your data you can use the PC Suite application to save and restore the data from your phone - this software can be found here :
    http://www.nokia.com/pcsuite
    One thing to note is that as part of these diagnostics, you should NOT restore any backup or install any software on the phone as you could be putting the problem back onto the phone.
    If this doesn't work then it's likely you have a hardware fault and you should approach your local Nokia Service Centre to get your phone fixed.
    Hope this helps.
    Please let me know how you get on.Message Edited by edwardquan on 16-Jul-200701:16 AM
    Regards,
    Edward

  • The packet data and wlan connection runs automatia...

    guys guys guys i'm having a wiered problem with this rubish E72
    well every time i check my log i find that my phone has used packet data connections and wlan connections for small time intervals and small periods while i haven't used the internet for a long time btw i always make sure to exit all app and also make sure to disconnect my email before exiting so packet data signals and wlan signal are not (on)
    so that means that the phone just uses internet by it's own self also notice that the time that the phone used the internet was during my sleep time
    but it's so weired it has used the packet data for 30 seconds and the wlan fo 1.5 mins by it self ..............is this a virus or that ugly firmware is just full of **bleep**
    please check your phones (log) and reply me back
    thank you
    Nokia E72-1 Black
    firmware : 053.001
    of 26 of nov 2010

    well for the  ovi sync i really use that app to sync my contacts and calender and it set to manual sync so i guess it wouldn't go by it self
    as for the wlan data and packet data , last night was ok withou any connection don't know how
    or what happened it seems the problem is solved but i will also make sure tonight of the problem still exist or not
    all i did last night i have installed 2 app (m.gaurd(netqin) and kaspersky antivirus) to scan my mobile and it did but it seems that its slowind down my already slow mobile
    and removed them today because they corrupted the interface of my snaptu application which i use for facebook (the highlight color disappeared but it was still working) so i had to uninstall it and reinstall back again
    Nokia E72-1 Black
    firmware : 053.001
    of 26 of nov 2010

  • How to close 5800 wlan connection that's "already ...

    plz help me with my nokia 5800Xm with this error: WLAN CONNECTION ALREADY ACTIVE, close it and try it again..   what should I do?? HELP ME..
    5800xm
    version : 21.0.025
    where do i disconnect that unknown running WLAN connection
    edit: topic added.
    Message Edited by vandelay on 11-Aug-2009 11:17 AM

    I fixed  this problem yesterday  it's so simple 
    1-you need to back up you device
    2-remove the memory card
    3- switch off the device
    4- it's kinda tricky but you need two people to do this press the red,green,camera and power button
    if you do it correctly you will feel vibration and then it will start once again .
    And there you have it hope this information was useful

  • Setup Email Using WLAN Connection - E72

    Hi.
    Did anyone manage to setup a Gmail or Windows Live Email using WLAN connection?
    1 - My internet connection has only the WLan connection. I removed my carrier internet connection.
    2 - Using the E-mail option at the menu, I type my gmail user, my password, and then nothing happens.
    3 - I tried doing this procedure without the SIM, using Offline mode. And again, nothing happens...
    Does Nokia want me to use my Carrier Connection just setup an email account using their interface and software?

    Yes for initial setup must use GPRS/3G from your provider. After the inital setup, it may or may not work with WiFi depending on your location.
    Was this post helpful? If so, please click on the white "Kudos!" star to the left. Thank you!

  • C3-00 Wlan Connection Failed (but not before)

    Hi!
    I bought a C3-00 today, at the begining, I could connect on my access point, but after charging my Nokia, I could'nt attach to the access point. This message appears now: "Wlan Connection Failed". I read some stuff about firmware update but I can't update my firmware because the 7th version is not available in my region (I'm belgian).
    Someone have an idea of the problem?
    Thanks.
    Edit:
    My router is a Bbox2 (Belgacom Box)
    Edit2:
    I've just try and it's work, it pretty weird. Do you thing problem comes from my router?

    Hi babyhedgehog,
    Thank you for your post and welcome to the forums!
    The security code is tied to the phone, not your SIM card. So, we would advice you to soft reset your phone again and try the default security code, which is 12345.
    If restoring factory settings does not resolve your issue, you can also try to hard reset your phone. This will remove all settings and personal data from your phone, so we recommend that you first back up your phone with Nokia Suite.
    To hard reset your phone, just dial *#7370#. 
    Let us know if this helps,
    Puigchild
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Gprs used instead of Wlan connection

    Hi,
    when I start nokia maps on my N95 8GB, it uses the gprs connection instead of the wlan connection.
    The wlan works fine, because if I remove my sim then it works ok (via wlan).
    When I put back my sim card and start nokia maps again then the data is downloaded through gprs.
    Is there a way in nokia maps, or anywhere else in the phone, where I can be warned if a gprs connection is opened?

    Hi,
    Thank you for your posting in Windows Server Forum.
    As per your comment, I can say that if you want to deploy RDS server 2012 HA then you need to deploy DNS RR for your environment. It depends on the company requirement whether which one you need to use. It’s not compulsory that you need to use DNS RR, but if
    you will access with DNS RR you don’t need to setup any Hardware LB. You can also use Hardware LB to load balance different RDSH server. 
    Please refer below articles for more information:
    1. Remote Desktop Server farms explained (Part 1)
    2. Remote Desktop Services 2012 | Remote desktop Connection broker High availability 2012
    3. RD Connection Broker High Availability in Windows Server 2012
    Hope it helps to understand! 
    Thanks,
    Dharmesh

  • How do I remove the wireless connection from my Apple TV 2.

    I have an Apple TV 2 and I want to sell it. Before selling it, I want to remove my wireless connection which has my home network password from the Apple TV. How do I do it ?
    Thanks for helping me.

    Put it in DFU and do an update. This will not only update it, but it will remove all settings. DFU =  hold menu+play while plugging it in.

  • Thinkpad X220: bad wlan connection when docked and lid closed

    Dear forum
    I use a Lenovo ThinkPad X220. I have no trouble with the wlan connection when i use the notebook alone. The wlan connection is also stable when i use the notebook plugged in the dockingstation with the lid open. But when I use the notebook plugged in the dockingstation with the lid closed my wlan connection drops regularely to about 2 Mbps and gets very unstable.
    The ThinkPad uses the Intel Centrino Advanced-N 6205 wlan network controller:
    $ lspci | grep 6205
    03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
    The network controller uses the iwlwifi driver, that comes with the current linux-firmware package:
    $ pacman -Ss linux-firmware
    core/linux-firmware 20150206.17657c3-1 [Installiert]
    Firmware files for Linux
    I didn't change any options of the kernel module, everything runs in default mode:
    $ modinfo -p iwlwifi
    swcrypto:using crypto in software (default 0 [hardware]) (int)
    11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
    amsdu_size_8K:enable 8K amsdu size (default 0) (int)
    fw_restart:restart firmware in case of error (default true) (bool)
    antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int)
    wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1) (int)
    nvm_file:NVM file name (charp)
    uapsd_disable:disable U-APSD functionality (default: Y) (bool)
    bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
    led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
    power_save:enable WiFi power management (default: disable) (bool)
    power_level:default power save level (range from 1 - 5, default: 1) (int)
    fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool)
    At first I thought, the problem could be caused by the KDE power saving settings. I changed the settings, so nothing happens when I close the lid (no hibbernation or screen lock or something like that), but without success (the wlan connection is still unstable under the described circumstances).
    Also dmesg shows nothing that points out a problem (as far as I can see):
    $ dmesg | grep iwlwifi
    [ 19.688522] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 19.688679] iwlwifi 0000:03:00.0: irq 31 for MSI/MSI-X
    [ 19.696095] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 19.718023] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 19.718027] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 19.718028] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 19.718029] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
    [ 19.718145] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
    [ 19.753757] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
    [ 20.128443] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
    [ 20.128652] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 20.403905] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
    [ 20.404212] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 68.922975] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
    [ 68.923192] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    So I have no idea where this strange behaviour comes from (only wild guesses: buildfactor, antenna orientation,...).
    Any help would be really appreciated.

    hmmm...
    how about checking both your wired and wireless nic drivers in device manager to make sure that the "allow computer to turn off this device to save power" checkbox on the power management tab is deselected.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • What is WLAN connectivity, how to use it for inter...

    hi all
    i have nokia n79, i have know about WLAN connectivity, i mean how to use it. i just check it in my office it shows WLAN network found, i opend it and select start web browsing, then it asked select WLAN network there it already shows hidden WLAN, then i connected it through hidden WLAN then it asked WLAN network name, what is WLAN network name and how to use WLAN network for internet browsing. pls suggest me
    thanks/regards
    Chandrakant Rajolkar

    This will get you started.
    http://en.wikipedia.org/wiki/Wireless_LAN
    Check your user manual.
    http://europe.nokia.com/get-support-and-software/product-support/nokia-n79/guides
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • N95 WLAN Connection problems - Orange Livebox (UK)

    I am trying to get the N95 to connect to the internet wirelessly through Orange Livebox (UK). I have run the WLAN wizard and the phone has identified it. I have input the WEP key and thats worked fine.......except everytime I try to connect to the net via this method I get a connection error. Has anybody else had WLAN connection problems? Can anybody help?

    hi,
    did you press "1" button at the back of the Livebox before pairing ?
    what kind of error message do you get on the N95 ?
    does it fail the same way when you go through the homescreen "WiFi scanning / Start Web Browsing" or through Tools / WLAN Wizard ?
    Cheers,

  • Firefox with wlan connect on laptop gives no connect what I need to maake wlan connect, network is ok

    have a bought a hp pavilion g series. had trouble with installation and updates. now problem that firefox with wlan has no connection. suse linux 12.1, wireless lan 802.11, FRITZ!Box Fon WLAN 7270, find no setup for wlaan in firefox that over the laptop wlan connection will work

    In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
    See "Firefox connection settings" in [[Server not found]]
    You can find the connection setting here: Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select ''No Proxy''

  • WRT54GL loses Wlan connection

    Hi
    I have a problem with an WRT54GL Router. It keeps losing the Wlan connection. Then I have to reboot the router to get it working again.
    On some days everything works fine, and the other day I have to reboot every 5 minutes. 
    I don´t use P2P. So there are not many simultaneous connections. Mostly there are only one or two Wlan Clients active.
    Between the Router and the Client is only one Wall. Signal Strenght is at all times above 85%.
    Does anyone have an idea what might cause this?

    Try upgrading your router's firmware and reconfigure it from the scratch.
    Click on this link for the instruction.

  • Help!!!!!!!! WLAN connection E71

    I have a problem with WLAN connection (E71), when I access my wlan, i receive a message saying " WLAN is already active, close it and try again".

    Please, have someone any solution?

  • How to execute "netsh wlan connect SSID", but SSID has space and quotation marks?

    Dear all:
    I have a wifi roruter with SSID test "3"
    But when I execute following command netsh wlan connect "test \"3\""
    the netsh reply: 未將設定檔 "test " 指派給指定的介面。
    Sorry my windows7 is chinese version, but as you can see, netsh detect my SSID as
    test, not test "3".
    Does everybody know how to use netsh to connect to a SSID, and these SSID has space and quotation mark both?
    Regards,
    Joseph

    Hi Joseph,
    Firstly, please modify your SSID name to make sure it do not contain spaces or special characters. SSID name is the router setting. please go there to change SSID name.
    In addition, If only one SSID is specified in the profile, then the specified SSID is used to connect, and the ssid parameter is not required. If the profile specifies multiple SSIDs, the ssid parameter is required.
    Therefore, I would like to suggest you run command as this syntax:
    netsh wlan conncet ssid=Your SSID of the unsecured wireless network name=Your current profile name
    To do this, please refer to the section “connect” in the following document:
    Netsh Commands for Wireless Local Area Network (WLAN) Preliminary
    http://technet.microsoft.com/en-us/library/cc755301.aspx#bkmk_wlanConn
    Karen Hu
    TechNet Community Support

Maybe you are looking for