Removing an object with BorisFX

The logo of the studio where we filmed is IN the frame and I need to remove it. I tried using BorisFX motion key but the object is not moving in relation to the frame. It's basically a wall with a logo on it and I need to make it a wall without a logo on it. Keep in mind that the camera is moving. The option of just blurring it out doesn't really help in this case. Anybody have any ideas?
Message was edited by: CBeditor

+"If it's basically a still shot"+
It is not a still shot. As I mention in the post, the camera is actually moving so it's making it very complicated. It's basically a wall behind where all the action is taking place and on the wall there is a logo. The camera is moving, the wall and the logo are still (meaning they're only moving within the shot, not on the set). There has to be a way to get rid of that logo somehow. We can think of it as an object within the frame that we want to remove. Does that help?

Similar Messages

Error while trying to remove an object with dsrm command

hello,
i get an error while trying to delete an object computer with the command line tool, DSRM. i get this view:
actually, it's a one of hundreds of commands, that help cleaning the active directory of the obsolete objects. it is saying : "Access Denied" (in french, accès refusé). i say that the account used to execute this command, is a member of domain
admins group, and enterprise admins group too. so i cannot believe it's a mater of some missing rights... :/
thanks in advance, for your help,
regards
Lotfi BOUCHERIT

Hi,
I was able to reproduce your issue when using a non-elevated command prompt in a 2008R2 box. So please try to elevate your command prompt and your command will most likely go through.
In addition to above, I'd suggest you look in to PowerShell instead, which in most cases is more effective.(and doesn't need to run in an elevated prompt to make AD-Changes)
The same as above could be done with the powershell cmdlet Remove-AdComputer.
Remove-AdComputer -Identity "Distinguishedname"
Hope this helps you!
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

Remove unwanted objects with content-aware healing

This question was posted in response to the following article: http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f-1a883eeb12e2803aa4d -7fdd.html

Have no idea what I did, so don't even ask. lol Double clicked on background layer and ended up creating a clipping mask. The using spot healing brush, I was able to remove water hose by the side of the pool, like I originally intended. I finally had upgraded from PSE 7 because of content aware fill and photomerge (and other stuff lol). The only thing was I seem to have lost my background layer. No problem, was working on a test file copy. Worked pretty good though. Not just have to find out what happened to my background layer. It was locked but ????? lol

Remove an object with Photoshop CC

Why do I always receive this message "Not enough source pixels" when using content aware fill?

Hi,
Thank you for your quickly answer. As you requested here is a screen shot.

How to remove an object from session with JSF 2.0 + Faceletes

hi all,
I have a facelets page which calls a backing bean of session scope. Now when ever i click on this page i want the existing bean object to be removed from the session . In my existing jsp i have a logic something like this to remove the object from session
<% if (request.getParameter("newid") != null) {
request.getSession().removeAttribute("manageuserscontroller");
%>
Now i have to refactor my jsp to use facelets and i should not be using scriplets anymore . I did try with JSTL but the <c:remove> tag is not supported by facelets.
Can someone help me how can i refactor this code to work for my facelets?
I really appreciate your help in advance
Thank you

r035198x wrote:
Redesign things so that the remove is done in a backing bean method rather than in a view page.Exactly that. I tend to cleanup session variables at the start and at the end of a page flow; generally the end is some sort of save or cancel action being invoked through a button but that is application specific.

How do i remove an Object (aliens/ bullets) from my Space Invaders game??

Creating Space Invaders game and im getting confused on removing objects from my game. How do you actually remove an object (i.e bullets and aliens).
I know this isnt the right way to do it, but for the bullets i had an array of the Objects bullets[] and set the x and y coordinates off screen so u cant see then wen they are painted you cant see them, then wen the player fires them, the x and y coordinates change so they come from the players ship till it hits an alien or goes off screen, then i reset the coordinates so they are pasted off screen again. Im relatively new to this so i would appreciate any help. Im going to have to do the same with aliens wen a collision is detected. Is there a way of actually removing an object?
Here is sum code incase you need to see it:
public void checkCollision()
          Rectangle playerRec = new Rectangle(player1.getBoundingBox());
          for(int i=0; i<alienRow; i++)
               for(int j=0; j<alienCol; j++){
                    if(playerRec.intersects(aliens[i][j].getBoundingBox()))
                         collisionDetected();
                    for(int k=0; k<bulletNum; k++){
                         Rectangle bulletRec = new Rectangle(bullets[k].getBoundingBox());
                         if(bulletRec.intersects(aliens[i][j].getBoundingBox()))
                              removeBullet(bullets[k]);
                              collisionDetected();
     public static void collisionDetected()
          System.out.println("COLLISION");
private void removeBullet(Bullets bullet){
          bullet.fired=false;
          bullet.setX(-10);
          bullet.setY(-10);
     }Edited by: deathwings on Nov 25, 2009 8:20 AM

deathwings wrote:
I was thinking bout that arraylist angle before, but it makes sense now so i think that will work ok. Thx kevin.Not a problem.
Taking the List idea one step further, you could have a parent Object/Interface that all of your game objects extend/implement. Let's call it GameObject.
A GameObject would have a draw(Graphics g) function that you call from your paintComponent( ) method, and for example an act( ) function as well.
You'd have a single List of GameObjects that you add everything in your game into. Now painting is simply a matter of looping over a single List. And in your game logic loop, you could do a similar thing with the act( ) function: your bullet's act( ) would simply move it forward and check for collisions and going off screen. An alien's act( ) function would move it around and maybe shoot a weapon every so often.
Just an idea.

Can't remove ghost object in Pages doc imported from Word

Hi there,
I imported a Word .docx into Pages '09 for it's better layout and figure handling capabilities.
I ran into a few issues with page numbers from Word being converted to background/master objects, but overcame that pretty easily.
The problem I now have, is that it seems one of the figures from the Word document has become some kind of unselectable ghost object. Which is only apparent because text is inexplicably wrapping around an empty space.
I've tried all the tricks I've found to select background and master objects with no luck. Has anyone encountered this before?
I'm attaching a jpeg of a screenshot of what the document is doing. Invisibles are on, so you can see that there aren't spaces, tabs, etc or an object. Yet the text is wrapping as if an object were there.
I've already made edits to the file, so I would really prefer not to have to delete figures from the Word file and re-import to Pages to fix this...
Any help would be much appreciated. Thanks very much!

Ah great, it worked!
A warning to others, exporting to Rtfd and re-importing to Pages seems to have removed many of my tables and figures from the original document, in addition to the weird ghost figure. I was planning on cleaning up the figures anyway, so this is not a problem for me, but others who try this should be prepared to lose many (but not all, oddly) of their inserted objects.
Thanks very much Fruhulda!!
eebick

Remove supporting object in Deinstallation Script

Hello.
I want to define a deinstallation script for my application. It should remove all created database objects and the supporting objects.
I can remove the database objects with SQL statements. But what is the command to remove supporting objects?
Maybe you can give me an example to remove an icon called delete.gif. (I think static items and images are handled in the same way, aren't they?)
Thank you very much.
Stephan

begin
wwv_flow_api.create_or_remove_file(
p_location => 'WORKSPACE',
p_name => 'image.gif',
p_mode => 'REMOVE',
p_type => 'STATIC');
end;

How do I do to add and remove Shape3D objects dynamically from TransfGroup?

Hi, everyone,
How do I do to add and remove Shape3D objects dynamically from TransformGroup?
I have added two Shape3D objects in the TransformGroup and I wanted to remove one of it to add another. But, the following exception occurs when I try to use �removeChild� :
�Exception in thread "AWT-EventQueue-0" javax.media.j3d.RestrictedAccessException: Group: only a BranchGroup node may be removed at javax.media.j3d.Group.removeChild(Group.java:345)�.
Why can I add Shape3D objects and I can�t remove them? Do I need to add Shape3D object in the BranchGroup and work only with the BranchGroup? If I do, I think this isn�t a good solution for the scene graph, because for each Shape3D object I will always have to use an associated BranchGroup.
Below, following the code:
// The constructor �
Shape3D shapeA = new Shape3D(geometry, appearance);
shapeA.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeA.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeA.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeA.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
Shape3D shapeB = new Shape3D(geometry, appearance);
shapeB.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeB.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeB.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeB.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
BranchGroup bg = new BranchGroup();
bg.setCapability(ALLOW_CHILDREN_READ);
bg.setCapability(ALLOW_CHILDREN_WRITE);
bg.setCapability(ALLOW_CHILDREN_EXTEND);
TransformGroup tg = new TransformGroup();
tg.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
tg.setCapability(TransformGroup.ALLOW_TRANSFORM_READ);
tg.setCapability(TransformGroup.ALLOW_CHILDREN_READ);
tg.setCapability(TransformGroup.ALLOW_CHILDREN_WRITE);
bg.addChild(tg);
tg.addChild(shapeA);
tg.addChild(shapeB);
// The method that removes the shapeB and adds a new shapeC �
Shape3D shapeC = new Shape3D(geometry, appearance);
shapeC.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeC.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeC.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeC.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
tg.removeChild(shapeB);
tg.addChild(shapeC);Thanks a lot.
aads

�Exception in thread "AWT-EventQueue-0"
javax.media.j3d.RestrictedAccessException: Group:
only a BranchGroup node may be removed I would think that this would give you your answer -
Put a branch group between the transform and the shape. Then it can be removed.
Another thing you could try: This doesn't actually remove the shape, but at least causes it to hide. If you set the capabilities, I think you can write the appearance of the shapes. So, when you want to remove one of them, write an invisible appearance to it.

Need to control rendering resolution when removing overlapping objects in Acrobat X Pro

When removing hidden information from a PDF using the Acrobat X Pro function Tools | Protection | Remove Hidden Information or Tools | Protection | Sanitize Document, Acrobat appears to remove overlapping objects by rendering the entire page into an image at, from what I can tell, 144 dpi. This resolution is too low for my purposes as small text becomes hard to read both on screen and when printed. Is there a way to control the rendering resolution?

What I was refering to by flattening is the "flatten image" function in Photoshop. As in the option directly below merge visable and merge down in the layers flyout menu. For some reason running that function or the rasterize function in the object menu in illustrator is the only way I can make sure transparecny boxs dont show up when I print through my Fiery Rip software. Like I mentioned this method works well with individual pages in multiple page pdfs, but I often have to do this for many images at a time. It would be nice to be able to do the same thing in Acrobat to the whole pdf all at one time.( Of course what would really be nice would be if people would submitt their files correctly to avoid this problem in the first place but that is asking way to much)

How to remove the Object from memory.

Hello.
Flash file that i made with Flex Builder uses memory too
much.
Look at the next example source code.
var testCan:Canvas = new Canvas();
this.addChild(testCan);
this.removeChild(testCan);
testCan = null;
but just memory usage still goes up, is not freed instantly.
so if i load the large flash files on my web browser,
after 5 munites or something, the web browser is down.
How to remove the object from memory immediately without
delay?

It's all about the Garbage Collector ..
There is a nice write up here :
http://www.gskinner.com/blog/archives/2006/06/as3_resource_ma.html

Objects with invalid references

hello everybody,
since 1 month in our PI dev we have a strange situation.
Inside every SC we see a tree named "objects with invalid references" that inside cointain the Namespace.
I notify we have this situation after a massive transport from PI prod to PI dev .
we decide to do this because no more develop are necessary and we decided to sincronizate the 2 systems.
It's possible remove this ?
thanks
Alessandro

Hi
Please check if the Prod and Dev SLD is sync and has all the SWC with same configuration.
Please also check the dependency maintain in Prod and Dev SWC.
refer the below discussion
SWCV deleted from SLD accidently
regards,
Harish

How to remove unused objects from the webcatalog In OBIEE11g

Hi,
I want to delete unused objects from obiee11g catalog, i know in obiee10g it's working fine (i.e: we can do it via manage catalog then delete the unused objects) is there any way to do it automatically like RPD utility --->removing unused objects from Physical layer in RPD
fyi: I don't want to delete manualy. i need somethink like button/link to find unused objects(report,filter,folder..etc) from my obiee11g catalog.
Thanks
Deva
Edited by: Devarasu on Nov 29, 2011 12:06 PM
Edited by: Devarasu on Nov 29, 2011 3:15 PM

Hi,
Checked with Oracle Support team and confirmed below points
--> incorporated into the Current product and consider as BUG it may resolve future release
--> Currently there isnt any automatic method to remove the unused objects like reports, filters,folder etc from catalog.
Treated as Bug
Bug 13440888 - AUTOMATICALLY REMOVE OF UNUSED CATALOG OBJECTS FROM WEBCATALOG
FYI:
SR 3-4984291131: How to remove unused objects from the webcatalog in obiee11g
Thanks
Deva

How can I remove an object using Photoshop Elements 7?

How can I remove an object using Photoshop Elements 7?

You could probably use the 8 point garbage matte in this situation. I personally think the 8-point garbage matte is a bit cumbersome, but it should get the job done.
1. Use the Razor Blade tool to place a cut before and after the shot with the bottle.
2. Select the bottle clip.
3. Press and hold Shift + Option, then drag the bottle clip up one track. This should create a duplicate clip directly above your original clip. (I'll refer to this duplicated clip as bottle2.)
4. Locate the 8-point Garbage Matte filter and apply it to bottle2.
5. Locate the Gaussian Blur filter and apply it to bottle2.
6. Control click bottle1, and uncheck the "Clip Enable" setting from the shortcut menu. This will disable that clip.
7. Double click bottle2 to load it into the Viewer. Then select the Filter tab.
8. For the Garbage Matte filter, you'll notice 8 rows of numbers, these are the current locations for the control points, which you should be able to see in the Canvas. Start with point #1, and click the "+" button in the filters area, then in the Canvas click and drag to move the point. When you release the mouse button, you'll need to reclick the "+" button in the filters tab. Repeat these steps until you've isolated the bottle.
9. Feather the edge of the matte.
10. Adjust the Blur amount.
11. Reenable bottle1. Playback the clip and make any necessary adjustments.
Depending on your experience with Motion, you might also want to try sending bottle1 to Motion, then use Motion to control the layering.

Why does Livecycle Designer need to lock scripting on objects with children that are fragments??

Can someone tell me why Livecycle need to lock scripting on objects with children that are fragments??
I mean, just because I have a fragment (which you can't edit the script for), why does Livecycle need me to NOT edit say the initialise event on the Main form.
Yes, I can remove my fragments, edit and reinsert. Also if the event already has a script, I can edit the xml. But neither of these are terribly convenient.
Couldn't there be a better way?

The purpose of the fragment is to create re-usable or standard components. In most cases the fragment is not created by the same person designing the form and they do not want the from designer to modify any part of the fragment (it is a separate XDP file). There may be code in that fragment that relies on the structure that exists. If you have the rights you can always edit the fragment and when your PDF is created the changes will be picked up.
If you want to be able to modify the fragment while it is in Design mode sounds to me like you want to add a component to the object library. This will allow you to have a reusable piece of a form that you can modify on a form by form basis. To do this simply build the piece that you want. Lasso the entire form and drag it onto the Custom library. When you release it a dialog will pop up allowing you to name your component. Now on any form design you can drag your new component onto the canvas and all methods/properties and code will come with that component (allowing you to modify it for that form as you see fit).
Note that you can create your own libraries to hold your components if you see fit. Also if you put your libraries on a shared drive, you can share components between Designers.
Paul

Removing an object with BorisFX

Similar Messages

Maybe you are looking for