Removing an unwanted Menu from project PE4

Hi.  This probably seems like a strange question but I have put together my project and used a Menu template where I browsed and imported a photo as the main background of the Menu.
When I play the through my DVD player, the image (only on the Menu) appears stretched and out of proportion in comparison to the other photographs.  As I could not see anywhere to change the ratio of the Menu photograph, I decided I would go without and not have a Menu (as it is only a 10 minute montage).
Now I cannot find where to delete the Menu so that it doesn't appear at the commencement of my project.
Can you please advise how I remove the Menu that I created and/or how to adjust the settings so that the ratio appears correct.
Thanks very much,
Rach

That might not be the most intuitive action, but it does just what you want.
As I author in another Adobe program, I do not spend THAT much time in the Create Menus area of PrE, and when I do, I will add the same Menu Set, as a poster, just to test. First time I was there, I wondered - how do I now clear my Project, so that it will work for the next poster? There, right in front of me was that AutoPlay toggle - done!
Good luck,
Hunt

Similar Messages

  • How do I remove an unwanted update from the App Store?

    Ok,
    So I open the App Store and there's a update awaiting me. Some App called CodeBox by one Vadim Shpakovski version 1.6 Released 7 April 2012
    So I check it over, check the app out and what it's all about. The App costs £6.99 and it's designed for developers. Simply I don't want the **** thing and I never applied or activated the app for purchase.
    I've looked everywhere and there's no delete update or remove update.
    Can anyone enlighten me as to how to remove the unwanted update?
    Thanks All.
    <Edited by Host>

    You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
    Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    In the Finder, press command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select  Other...
    A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
    Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
    The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
    Log out and log back in. Test.

  • How can I remove dropdown calendar menu from date/time field.

    I set up a javascript calculation based on the input of a date field. As long as the user enters the date manually the script works fine. If user attempts to select date by drop down menu then script will not work. How can I remove the calendar feature from the Date field?

    You may have to wire custom script to get you what you need. That would probably work on 'exit' event.
    Just you give you better Idea here is some thing I have on a date field. If user types his own date instead of picking from calendar this code checks whether it is valid date or not and returns to the same field either they enter valid date or clear the field.
    This is FormCalc script. You may get the idea how this works and make it work for you using the same logic either in FormCalc or JavaScript.
    ----- form1.SOF.Head.Table1.Row1.ReqDate.Date_ReqDate::exit: - (FormCalc, client) ------------------
    if (HasValue($)) then
    if (Len($.rawValue) == 10) then
    var S1
    var MM
    var DD
    var YYYY
    var Derror
    var D1
    var D2
    var S2
    Derror = 0
    D1 = 0
    D2 = 0
    S1 = $.rawValue
    D1 = At(S1, "-")
    S2 = Right(S1, 5)
    D2 = At(S2, "-")
    if (D1 > 0 and D2 > 0) then
    if (D1 == 3 and D2 == 1) then
    MM = Substr(S1, 1, 2)
    DD = Substr(S1, 4, 2)
    YYYY = Substr(S1, 7, 4)
    elseif (D1 == 5 and D2 == 3) then
    MM = Substr(S1, 6, 2)
    DD = Substr(S1, 9, 2)
    YYYY = Substr(S1, 1, 4)
    else
    Derror = Derror + 1
    endif
    else
    Derror = Derror + 1
    endif
    if (Oneof(MM, "01", "02", "03", "04", "05", "06", "07", "08", "09", "10", "11", "12")) then
    Derror = Derror
    else
    Derror = Derror +1
    endif
    //xfa.host.messageBox("MM"+ Derror, "Incorrect Date", 1, 0)
    if ((Oneof(DD, "01", "02", "03", "04", "05", "06", "07", "08", "09")) or ((DD >=10) and (DD <= 31))) then
    Derror = Derror
    else
    Derror = Derror + 1
    endif
    //xfa.host.messageBox("DD"+ Derror, "Incorrect Date", 1, 0)
    if ((YYYY >= 1975) and (YYYY <= 2050)) then
    Derror = Derror
    else
    Derror = Derror + 1
    endif
    //xfa.host.messageBox("YYYY"+ Derror, "Incorrect Date", 1, 0)
    if (Derror > 0) then
    xfa.host.messageBox("Preferred valied date between Jan 01, 1975 and Dec 31, 2050. ", "Incorrect Date", 1, 0)
    xfa.host.setFocus($.somExpression)
    else
    //good
    $.formattedValue = Format("MMM DD, YYYY", Concat(YYYY, MM, DD))
    if ($event.shift) then
    //xfa.host.messageBox("Shift")
    var sh
    sh = 1
    //xfa.host.setFocus("xfa.form.form1.SOF.Head.RadioAttachTo.RadioAttachTo3")
    else
    if (xfa.event.commitKey == 1) then
    var A
    A = 1
    else
    xfa.host.setFocus("xfa.form.form1.SOF.Head.Table1.Row2.CustName")
    endif
    endif
    endif
    else
    xfa.host.messageBox("Preferred valied date in format MMM DD, YYYY.", "Incorrect Format", 1, 0)
    xfa.host.setFocus($.somExpression)
    endif
    endif
    Good luck,
    SekharN

  • How do I remove an unwanted app from my ipad

    Can anyone help me to work out how to remove unwanted apps from my Ipad, I loaded one or two free apps and can't work out how to delete them. thanks

    Have you read the User Guide?
    http://support.apple.com/manuals/#ipad
    In particular, page 25

  • TS1702 I need to remove one unwanted application from my account totally ( iCloud & Ipad). As my ipad will be handled by my kids Ido not want them to see. Please help me to remove my purchase. thanks.

    I need to remove one purchased app from my iCloud and ipad. Needs  solution
    immediately.

    You cannot delete past purchases from your iTunes account. You should delete it from your iPad and then use Restrictions to stop kids from downloading without the pass code. See http://support.apple.com/kb/ht4213
    You can also hide things from your iTunes account by following these steps http://support.apple.com/kb/HT4919

  • Remove an unwanted app from Itunes account - ipad 1 - IOS 5.1.1

    How can I remove an app from my Itunes account? I have deleted it from my Ipad but it still shows in the list on ITunes. I read some other helps that said press delete with the app highlighted but that just causes the computer to beep and nothing happens.
    Larry

    You should be able to delete the app in iTunes.
    Launch iTunes. Click on Apps under the Library heading. Find the app in the window on the right, right click on and select delete from the contextual menu. Follow the prompts to totally delete it.
    Do this without connecting the iPad to your computer.

  • Removing unneeded configuration files from project (in configuration folder)

    Last week, I took the LabView basics I and II class.  During the class, I created a project with a pre-existing vi of mine (that I had previously written).  When I arrived back at work, I load the vi and the vi is looking for configure waveform.vi, configure waveform format.vi, and the read waveform.vi.  These waveforms must have been on the computer during the class, and are unneeded. 
    Is there a way I can prevent the project from trying to load these files?
    Mark
    metzler CLAD

    never mind, I had an off the page sub vi that needed those files.
    metzler CLAD

  • How do I remove an unwanted server from the console window?

    Hi all, hope someone can help, as I'm rapidly running out of hair to pull out :-(
    I have one upstream server, set up perfectly on Windows Server 2012, and six downstream servers all running Windows Server 2008 R2 Enterprise. Five of my downstreams are set up and working as expected, but one is behaving a little strangely.
    Here is an example of one of my downstream servers which is configured correctly:
    Just showing the upstream server, as you would expect.
    Now here's my problem downstream server:
    As you can see, not only does it list the upstream server, as expected, it also shows itself as a server. I have tried right-clicking it and choosing 'Remove from Console', but it just comes back after closing and reopening the console.
    Any advice would be greatly appreciated,
    Carl...

    On all downstream servers, except ServerDOWN4 only the ServerUP01 is seen in the WSUS console. On ServerDOWN4, you can see ServerUP01 and ServerDOWN04 in the WSUS console.
    Is this normal?
    No, and the short answer here is that apparently the consoles were configured to connect to the wrong server, and on 'DOWN4', TWO servers were configured in the console.
    But here's a more significant question....
    Why, on WS2012 and WS2008R2 servers are you using the standalone console anyway? If you use
    SERVER MANAGER, which is the expected behavior, the *LOCAL* server will be automatically displayed.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • HT4859 How do I remove old unwanted applications from my app store tracking?  I removed from the phone, but still showing and reinstalling from the App Store screen.

    I'm trying to remove old apps off my phone, and they keep showing up.  How do I get rid of them?

    i was losing temper looking for an answer for this. at the end the trick is that you need to show the side bar then only your library will list the apps menu for you to access & start doing the deletion huhhhhh..
    Itunes > view (menu bar) > show side bar > under library select apps > all apps list either active & deleted on your device will be displayed in tile view > then you start to delete by right clicking> finally empty recycle bin >

  • Removing add-on menu from the Main menu in SAP B1

    Hi ALl
    I developed an ADD-ON for SAP B1. It starts and stops properly.
    But When I stop Add-On it still appear in the main menu as a menu which not desirable, I want to remove that menu also when I stop it.Pls help me on that matter
    Thanks
    Padma

    Hi Padma,
    You have to catch the Application event and in the aet_ShutDown event put the michel's code
    public static void Init()
    oApplication.AppEvent += new SAPbouiCOM._IApplicationEvents_AppEventEventHandler(OnApplicationEvent);
    static void OnApplicationEvent(SAPbouiCOM.BoAppEventTypes EventType)
                if (EventType == SAPbouiCOM.BoAppEventTypes.aet_ServerTerminition)
                    //Remove the menu
    SAPbouiCOM.Menus oMenus;
    oMenus = SBO_Application.Menus;
    oMenus.RemoveEx("MenuUID");
                    Application.Exit();
                else if (EventType == SAPbouiCOM.BoAppEventTypes.aet_ShutDown)
                    //Remove the menu
    SAPbouiCOM.Menus oMenus;
    oMenus = SBO_Application.Menus;
    oMenus.RemoveEx("MenuUID");
                    Application.Exit();
    Best regards,
    Jesús Medina

  • How to remove the app-toolbar from projects?

    hi all.
    i know there was somewhere a tutorial-part on how to make the app-toolbar invisible in the layout, but i can't find it anymore.
    i mean the toolbar with
    edit application : edit page X : new : session : debug : show edit-links
    thanks for hint!

    Joshua,
    You only see the toolbar when you are logged into a workspace as a developer. You don't really have to remove it for end users. Try this: make sure you're not logged into a workspace and run your app directly:
    http://<host>:<port/pls/DAD/f?p=<your app ID>:<page ID>
    Sergio

  • How do I remove an unwanted city from the weather app?

    I would like to be able to add and remove cities in the weather app and none of the intuitive iOS methods I've tried so far seem to work.  How do I remove a city?

    OK, I'm an idiot.  I finally got the correct English on my right-to-left swipe and the red 'delete' button came up.  All better now!

  • I have purchased too many application, now I want to remove some unwanted application from my iCloud backup storage. How can I remove those unwanted application from iCloud backup?

    Please If anybody know this answer, please post me.

    Welcome to the Apple Community.
    Your apps are not in your back up file, only your app data.

  • Removing access from Project creator by admin account

    We are working with Microsoft Project Server 2013 installed with Sharepoint server 2013 
    We have two users U1 and U2 and Admin account as A1
    U1 created a Project P1 and gave owner access to U2
    after that Admin A1 removed U1 from owners list but still U1 is able to browse project with same access level.
    We want to Remove access of U1 from Project P1 with help of admin account.
    Tech Learner

    Change the project owner from U1 to U2 in the project information page in PWA. From the project center, click on the project P1, go to the project detail page and update the "project owner" field for U2.
    Already Did
    Then U2 must set himself as the status manager of the project. Ask the user U2 (be aware that this operation CANNOT be done by the admin) to open the project in MS Project, insert the status manager column and set his name (U2) for all tasks of the project.
    Save and publish the project.
    What is Status Manager ? I can't find such permission level anywhere in Project Server 2013
    See this blog
    from EPMA which explains the procedure very well.
    Not exactly for Project server 2013 
    In case U1 still has the same access to the project, it might be due to your RBS/categories configuration. 
    what is RBS/Categories Configuration n PS 2013 ?
    Tech Learner

  • Cannot remove file menu from split screen monitors.

    Hello, I installed the latest update from Apple which was the new Safari 7. I run 2 added monitors with my iMac being the primary. After update installed, both of my split monitors have the file menu on the top of the monitors. I went into the system menu under display and everything is as it should be yet I cannot remove the file menu from my secondary monitors....

    Thanks for the info however this still didnt solve the issue. I unselected and closed window but no changes were detected. I re opened the mission control and the box was selected again. I still have the file menues on both secondary monitiors. After i installed the latest update from apple, the one with the new safari update, is when i started having this issue. Everything worked fine before. My computer seems to be runing much slower now and when i click to open safri, it takes about 40 seconds to open safari..On both secondary monitiors, the file menues operate as if they are the main monitor, which my imac should be operating as the main....This is anoying...

Maybe you are looking for