Removing Apples address entry

Sorry if this has been asked before, but searching for this title gives more than many answers (apple and address book gives tons of entries)
I bought my computer in Sweden, Apple Sweden's HQ address was in the address book, deleted it and it was gone (10.4 back then)
Then I moved to Denmark and Apple Danish's HQ address popped up, deleted it, but it kept reappearing after updates (10.5), annoyed me back then, but didn't ask about it.
Then I'm now in Germany, with the above pattern you should expect that Apple Germany's HQ address would pop-up (when I upgraded to 10.6 it did, deleted it..gone)...but the danish one keeps coming in, after every reboot, and now it's getting kind of annoying, esp. since I started using the address book a lot more moving down here.
Where do I find this "auto update" "feature" so I can switch it off ?

When I have imported a project it always pops up with
the message that it will be removed from aperture,
and deleted from the harddrive. The last part bothers
me. To me this means that I have to first copy all
the files I want to work with in a separate directory
before I can import them into Aperture, because
otherwise when I want to remove them from Aperture
they will be deleted... not good...!
So, can anyone tell me if there may be a way around
this issue. Is there a way to import files (etc) and
later remove them from aperture without having them
removed from existence?
I am not quite sure I follow what you are seeing from your description - I import files into Aperture by dragging them into the project/library pane. After import my original image are still where they started from...
It's possible you are using the Import dialogue, and that it deletes files after import - though I did not think it did that. I ahve not used it much though so I could not yet say for sure. Possibly ou are importing directly from a memory card or camera?
In any case simply dragging files into Aperture from the Finder will leave them where they are.

Similar Messages

  • Removing Auto Complete Address Entry

    For Mail, I set Compose preference to auto complete address entry. At some point, I have entered an incorrect email address. Now, when I start to type that person's email address, I am presented with both the incorrect and correct address -- and I can never remember which is correct.
    How can I remove an auto complete address entry forever?

    LCR,
    To remove an old address go to Mail>Window>Previous Recipients...select and "Remove From List" for the one you no longer want.
    ;~)

  • Unable to remove Static Drop entry | 2960 Cam Table

    Hi all,
    I am facing a strange issue here on a production switch (Cisco 2960 IOS 12.2(55)SE5)
    I have the following entry in my cam table:
    switch#show mac add int gi0/10
              Mac Address Table
    Vlan    Mac Address       Type        Ports
    123    1234.1234.1234 STATIC      Drop
    Although this mac-id has not been statically entered in any way it shows up as static and I can't remove it. I tried all possible clear commands without success. As a last step I reset the interface to the default empty config just configuring it as access port in an office vlan.
    I am trying to avoid having to reload the switch to clear the related memory as this generates downtime. Has anyone ever faced such an issue and can advise me?
    Logs:
    switch#show mac add add 1234.1234.1234
              Mac Address Table
    Vlan    Mac Address       Type        Ports
    123    1234.1234.1234    STATIC      Drop <-- note the "interface"
    Total Mac Addresses for this criterion: 1
    Current configuration : 47 bytes
    interface GigabitEthernet0/10
    shutdown
    end
    switch#conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    switch(config)#int gi0/10
    switch(config-if)#sw mod ac
    switch(config-if)#sw ac vl 123
    switch(config-if)#no sh
    switch(config-if)#do sh mac add int gi0/10
              Mac Address Table
    Vlan    Mac Address       Type        Ports
    123    1234.1234.1234    STATIC      Drop
    Total Mac Addresses for this criterion: 1
    switch(config)#clear mac address-table static 1234.1234.1234 vlan 123 drop
    MAC address could not be removed.
    Address is not user configured
    switch#clear mac add dynamic address 1234.1234.1234
    switch#sh mac add add 1234.1234.1234
              Mac Address Table
    Vlan    Mac Address       Type        Ports
    123    1234.1234.1234    STATIC      Drop
    Total Mac Addresses for this criterion: 1

    Hi Umesh,
    Of course there is nothing with this mac in the config. That was like the first thing that has been checked. There was dot1x running on this and all the other ports which of course has been disabled and cleared accordingly.
    The problem is that there is some sort of cam table holding the Drop entries and although it should the memory is not being freed up when using the commands according to the documentation.
    This is definitely a question for an IOS geek or someone who already had a similar issue once. If I open a TAC case they will tell me to reboot so the only hope is really someone who had this issue already once and resolved it without reboot.
    Anyone with experience in this?

  • Where do I go to remove email address suggestions when posting?

    in email when you type the first letter for the person you are sending, it gives you choices of what matches it. I see old addresses that I would like to delete and not have them keep popping back up.
    Where is that kept?

    The address autofill feature pulls from the Address Book and the list of Previous Recipients in Mail (this list is stored in the primary Address Book database).
    You answered yes to George's question so if you removed a contact or email address from the list of Previous Recipients in Mail but this contact's incorrect email address remains in the Address Book, the incorrect address will still come up with the autofill.
    Since you answered yes, you need to remove this address from the contact's entry in the Address Book.

  • My wife somehow removed the address bar/toolbar from the page - i cannot figure out how to get it back

    my wife somehow removed the address bar/toolbar from the page - i cannot figure out how to get it back

    In Firefox 3.6 and later on Windows you can hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu on a toolbar.
    Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
    Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
    See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

  • TS3999 how to remove duplicate Birthday entries in icloud on my PC

    how to remove duplicate Birthday entries in icloud on my PC
    The Birthday entries on my iPad are ok.

    Welcome to the Apple Community.
    The following article(s) may help you.
    Resolving duplicate calendars

  • How to remove the row entries

    HI,
    I have a row entry which contains radio button,dropdown,input field,calender.All the fields are dynamic
    All these fields(UI elements) are in one line and these are not in the table.If I add new entry(by clicking NEW ENTRY button),then a new row will be added dynamically with the same UI elements in the new row.Means every new row entry contains radio button,dropdown,input field,calender.
    Problem :- I want to delete one row entries.Means if I delete the 5th row entries,then it should remove all the UI elements(radio button,dropdown,input field,calender) from that 5th row entries only.
    I think I am clear about the requirement.
    Please suggest me how to remove a row entry.These UI elemenets are not table entry.
    Regards
    -Sandip

    Hi Sandeep,
    You can use the below code for deleting a row from table.
    int n = wdContext.nodeProducts().size();//size of node binded with table
    int leadSelected = wdContext.nodeProducts().getLeadSelection();
    // loop backwards to avoid index troubles
    for (int i = n - 1; i >= 0; --i)
    if (wdContext.nodeProducts().isMultiSelected(i) || leadSelected == i )
    wdContext.nodeProducts().removeElement(wdContext.nodeProducts().
    getElementAt(i))
    Hope this will help.
    Regards
    Narendra

  • I need a fix from HP which outlined how to remove the registry entries which were stopping recognition of the cd/dvd reader but then itunes cannot find the reader.

    I need a fix from HP which outlined how to remove the registry entries which were stopping recognition of the cd/dvd reader but then itunes cannot find the reader.

    Thanks for pointing that out, it was not apparent on the day i used them and wrote the How-To. The links have been replaced with the SID# (Solution ID #) and the title given for the Article.
    Have fun

  • Mail 2.1--remove old addresses?

    Using Mail 2.1...how can I delete old addresses from the cache? For example, if "[email protected]" has changed his address to "[email protected]", both addressed still appear in the auto-fill-in list if I type "c..." I'd like to able to delete the old one and other addresses that I no longer use. I can easily reset Safari, but I don't see what I need under Mail Preferences.

    Doesn’t typing remove old address (or remove address, or just address) in Mail Help’s search box return any useful information?

  • How to remove Navigation Bar entry

    Hi,
    Is it possible to remove navigation bar entry 'Welcome: USERNAME'?
    Can any one help with this please?
    Kind Regards
    Rana
    Edited by: Rana007 on Sep 29, 2011 5:51 PM

    Rana,
    Check out the Body of you standard page template. Make a copy of this code prior to experimentation !
    Within the Body you may see something like this:
    <div id="header">
      <div id="logo"><a href="#HOME_LINK#">#LOGO##REGION_POSITION_06#</a></div>
      #REGION_POSITION_07#
      <div id="navbar">
        #NAVIGATION_BAR#
        <div class="app-user">#WELCOME_USER#</div>
        #REGION_POSITION_08#
      </div>
    </div>Removing the line with <div class="app-user">#WELCOME_USER#</div> should do it.
    Jeff

  • How to remove qualified lookup entries

    Hi All,
    My scenario is as explained below:
    Main table: Customers
    Qualifeid lookup table: Customer_Brands
    Qualifer: Form_action (this is a Lookup field and the lookup table is Form_Action)
    Form Action table has an entries called "CR" and "MO"
    What I need to do:- There is a set of customers with form action value as CR. I need to remove this value (essentially make it null) for all those customers using MDM Java API.
    So the question in short is how to remove qualified lookup entries?
    NB: I am able to replace CR with MO and vice versa since these entries are in Form_Action table, but unable to remove these entries.
    Please give some inputs on this. Sample codes are appreciated.
    -Thanks,
    Padmarajan.

    Hi Adhappan,
    My code snippet to set the value is as below:
    A2iFields formFields = new A2iFields();
    A2iField intField = new A2iField("Form_Action");
    Value val = new Value(ValueType.ValueNull);
    intField.SetValue(vall);
    formFields.Add(intField);
    But the ValueType.ValueNull returns an integer (in my case 17) and the form action field of the customer gets set with the value at that row of the form action table once I execute a modify query.
    Please advice as to how to code it correctly.
    -Thanks,
    Padmarajan.

  • Removing the Delete Entry (Shift+F2) in SM58 through authorization object

    Dear All,
    Please guide me how to remove the delete entry (Shift+F2) from the following tcode SM58, SMQ1, LBWQ.
    The above said tcode having the S_ADMI_FCD with NADM check.
    I know to edit or copy the standard reports which is used to do the activity.
    But I would like to implement this to the functional Users only to avoid deleting all the TRFC logs.
    Please suggest ASAP.
    Cheers..
    Khadar

    Hi,
    I Appreciate your response.
    Actually my issue was, once you execute the SM58 it will list all the TRFC logs with the criteria of all or mentioned users.
    There you could find the delete icon and in the Edit menu --> Delete Entry (Shift+F2).
    I want to disable this function for all the users except System Administrators.
    Cheers..
    Khadar

  • BAPI to Insert new Address entry to a Customer

    Hi,
      I am working in ECC 6.0 and i am looking for a BAPI/FM to insert a new Address Entry in ADRC table   by passing address number or customer number as an input parameter to the BAPI...for example Nation = 'A' (Arabic) should be the new entry ... Please help me out in this regard ..
    Thanks & Regards,
    PSK

    Hi,
    If i understand your requirement right, i think the BAPI BAPI_BUPA_ADDRESS_ADD will help you add an address against a customer / business partner.
    Please check the same, and remember to call BAPI_TRANSACTION_COMMIT after this if you use it.
    Hope this helps.
    Regards,
    Chaitanya

  • Format address panel in iCal to show Department from the address book. At the moment it is showing 'Job Title' even though that has been removed in Address Book.

    Can anybody help please How do I Format address panel in iCal to show Department from the address book. At the moment it is showing 'Job Title' even though that has been removed in Address Book.

    I have a similar problem. I actually spoke with a Paypal customer Representative a few months back who informed me that they had deleted all of my previous *Hidden* Address but when I just purchased an item today on a online merchant's site that I had never been to before and checked out using their Paypal option, I noticed that my default shipping address was in fact my old address and when I went to change the address to my current address, I noticed all of the old addresses I ever used were still there. I've just spoken with 2 separate paypal representatives who confirmed on their end that all of the old address have been deleted and the only one they have on file is my current address. Can anyone provide me an explanation as to why the old hidden address can still be showing up when I check out on merchant's sites using paypal even after they've seemingly been deleted? The last Representative suggested clearing out my browser's cache, but I don't believe that will resolve my issue. Thank you in advance.

  • Remove Email Addresses From a Formatted Excel File

    I have an excel file that has some formatting in it that I
    would like to preserve (some cells have background color, etc). I'd
    like to remove a list of email addresses from this file. My first
    thought is to use cffile with action read, use the following in a
    cfloop: replace(emailAddressToDelete,
    excelFileVarCreatedFromCffileRead) and then save it back to excel
    format with cffile using action write. I tried this and the Excel
    file would not open. The error was:
    test.xls cannot be accessed. The file may be read-only, or
    you may be trying to access a read-only location. Or, the server
    the document is stored on may not be responding.
    I'm guessing something went wrong in the process of reading
    and writing the files contents and it's not as simple as I want to
    make it. Anyone have something to tell me that might help me remove
    email addresses from a formatted Excel spreadsheet?

    jqcf wrote:
    >
    > I'm guessing something went wrong in the process of
    reading and writing the
    > files contents and it's not as simple as I want to make
    it. Anyone have
    > something to tell me that might help me remove email
    addresses from a formatted
    > Excel spreadsheet?
    >
    Yup, .xls is a proprietary encrypted file format and
    <cffile.... is not
    going to be able to successfully read and modify it's
    content. You can
    copy it or move it, but not modify it with <cffile...>
    If the file format was a plain text such as .txt or .csv you
    could do
    what you are thinking about, but then you would probably not
    have the
    proprietary excel formating in the file.
    I've heard about the POI library that allows some native
    Excel access
    and such, but I am not knowledgeable in its ins and outs.

Maybe you are looking for