Removing .bak files after a certain time

I am new to automator but was wondering if the following can be done...
after saving a file in autocad it always creates a .bak file. now can automator for selected folders and after a time period of time after the .bak files has been crated, this automatically delete this files. and i mean only .bak files that are for instant more then a week old....
if so, can someone explain me a little how this can be achieved?
thanks, john

How old are you? If 1998 is the year you were born, it's entirely possible your parents have subscribed to a 'smart limits' service, which will disable your data connection, text messaging, etc. during hours they choose.

Similar Messages

IPOD freezes after a certain time

After a certain time using the device, the touch display does not work anymore. The app is still running, but not reacting any more. After switching off the Ipod is working again for a certain time.
The device has been rebooted several times, restored via Itunes and also the firmware is up to date.
The device is one year old, 8GByte, enough memory available and the battery charged.
The problem started some weeks ago.
I started to remove some apps without success actually.
Apps that have a bigger size seem to increase the occurence of the problem
Using WiFi increase the occurence also.
Any ideas welcome!!!

Here finally the solution for my problem:
The hardware of the Ipod had a problem. The device had been replaced by a new one. As I bought the device in Germany, there is an extended warranty of 24 month. The retailer where I bought the device took it back and gave the complete money back including the shipment costs! So I ordered the now IPod Touch G4 and have now fun again.
The suggestion which already had been given was correct and helpful.
A comment about the retailer:
I bought the device via Amazon. There support even on a Sunday evening was just great. In one week (!!!) I sent the device (on Monday), got the result of the investigation and received the new device (on Friday).
The support I received here was just great!

IDVD is closing after a certain time.

Hi, i made a movie with a sony Z1-HDV camera and made the montage in FCP. Than i export it with Quicktime 7.5. Than dropped it in iDVD. After a certain time iDVD just quits. With the below report.
Also when i just open iDVD and open an other iDVD project and do nothing iDVD just quits after a certain time. Read below report.
What to do???? I have to finish this project by wednesday!!!! HELP!!!
Process: iDVD [512]
Path: /Applications/iDVD.app/Contents/MacOS/iDVD
Identifier: com.apple.iDVD
Version: 7.0.2 (1100)
Build Info: iDVD-11000000~17
Code Type: X86 (Native)
Parent Process: launchd [84]
Date/Time: 2008-08-03 19:43:10.272 +0300
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 22

Yikes! You're on the very edge of a kernel panic if you haven't yet seen one. Something is amiss ....
Are you using any external FW or USB HD's / 3rd party devices while attempting to burn an iDvd?
If so, Restart your Mac without any 3rd party devices attached and try again. But first run apple's disc utilities to Repair Permissions. Assuming you have no less than 20GB's of available HD space on the boot volume and that all assets for iDvd are located on this same volume (your main HD and not on the external volume/s).
Post back with your results.
Message was edited by: SDMacuser

Do notes disappear after a certain time?

The earliest entry in the Notes app has disappeared. Do they get deleted after a certain time or if I have inadvertantly deleted it can i get it back from icloud somehow?

They never expire - at least from iCloud. I still have some five year old notes.

Do notes go away after a certain time?

Do notes on the iphone4 go away after a certain time? One of my most important note is gone.

How old are you? If 1998 is the year you were born, it's entirely possible your parents have subscribed to a 'smart limits' service, which will disable your data connection, text messaging, etc. during hours they choose.

Powershell- FTP Script to copy files only after a certain time

Hey guys,
We are currently running an FTP script that decrypts pgp and copies/moves several files to different archived and production locations. These files come in constantly throughout the day and we need to ensure a certain 8 files get moved to 4 different locations
but NOT before a certain time.
Ex: File1 and File2 are received EARLY along with 50 other files and decrypted at 9pm EST on 9/4. File1 and file2 need to WAIT to be moved until after 12:05am EST on 9/5 or it is slapped with an incorrect $date/time and not processed correctly but
every other file needs to be moved (which is currently all configured).
Right now, both file1 and file2 are being moved as the script runs (every 10 minutes) so when the files come in early from the vendor- they get the incorrect date/time stamp.
I'm fairly new to powershell so I'm not quite sure how to set this up to only move the file if it is between a certain time- say 12am-1am and no other time.

I was able to resolve this myself by doing the following:
$hourdate = get-time –uformat “%H”
#Copy-Item as long as time is in the 12:00am or 1am hour
if(($hourDate -eq "0")-or ($hourdate -eq "1"))
copy-item objects
Thanks guys

Getting labview to stop after a certain time.

I'm trying to get labview to stop running after a set time? I have a load cell attached to a NI ELVIS board and once the set load is read by labview it's outputting a voltage thourgh the board but continuesly till the load is removed. I would like to ouptut the voltage to stop after a certain amount of time with the load still on the load cell.

bmira1 wrote:
I would like to ouptut the voltage to stop after a certain amount of time with the load still on the load cell.
Of course stopping LabVIEW (as described in the post title) and stopping an output voltage (as described in the post body) are two completely different things! Blindly stopping LabVIEW will not necessarily reset any active analog output to zero.
Best would be a simple state machine that changes the output to zero after a certain elapsed time. This could for example be done with the timeout case of an event structure or even with the "elapsed time" express VI (or with the code fragments given above after you make sure there is a small wait in the polling loop)
When the experiment starts, write a certain voltage to the output once (You don't need to do that over and over, only when the voltage changes) and, after the time has elapsed, write a zero voltage to the output.
No need to stop LabVIEW. You should actually disable or catch "panel close?" events and other abnormal shutdown attempts, and reset the outputs in an orderly fashion before allowing the program to stop.
LabVIEW Champion . Do more with less code and in less time .

Call quality gets choppy after a certain time

Hello, Having an issue with my Comcast phone service. Quality seems to be good (for VOIP) on most calls, however, if I have a call that runs over 45 minutes or so, the line gets choppy and I'm only able to hear about 1 out of every 3 words. This happens consistenty on longer calls after a certain period of time (usually after around 45 minutes). There doesn't seem to be any problem at all during shorter calls, but it's incredibly annoying since I use my phone for work and many of my work calls run longer. Thanks,Ryan

Group video calls have a fair usage policy so if you are doing a group video call more than 4 hours a day/100 hours a month then you could have issues. Normal video calls should not have that limitation though I could imaging there could possibly be a limitation if you attempted to keep a single video call running 24x7x365.
http://www.skype.com/en/legal/gvc-fair-usage/

Removing unsupported files after importing folders?

I have lots of folders on my Mac that have been imported into LR, however, there are lots of files inside these folders that LR does not support like .png files so they never were imported. If I go into all of these folders and remove the files that LR doesnt like,
Will it cause a problem since the folders have already been imported?
Thanks.

This does not cause a problem. It is not the folders that have been imported, it is individual files that have been imported. This is always true, even though sometimes we here speak (improperly) of "importing a folder".

How to remove swf file after some time?

Hi all,
I am working in flex 3.5 . i have loaded one swf file in mxml, i want to make invisible after some sec's. for that what i have to do. pleae anyone help me.....

SetTimeout?

Turn off screen after a certain time in xorg.conf

added
Option "DPMS" "true"
to monitor
and
Option "OffTime" "1"
to serverflags
and it doesn't work.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Thu Feb 14 18:13:41 PST 2008
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
Option "OffTime" "1"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "synaptics"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
Load "glx"
EndSection
Section "InputDevice"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "latitude"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
#Section "InputDevice"
# Identifier "touchpad"
# Driver "synaptics"
# Option "Device" "/dev/psaux"
# Option "Device" "/dev/input/mouse0"
# Option "Protocol" "auto-dev"
# Option "LeftEdge" "1700"
# Option "RightEdge" "5300"
# Option "TopEdge" "1700"
# Option "BottomEdge" "4200"
# Option "FingerLow" "25"
# Option "FingerHigh" "30"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "220"
# Option "VertScrollDelta" "100"
# Option "MinSpeed" "0.06"
# Option "MaxSpeed" "0.12"
# Option "AccelFactor" "0.0010"
# Option "SHMConfig" "on"
#EndSection
Section "InputDevice"
Identifier "touchpad"
Driver "synaptics"
Option "AlwaysCore" "true" # send events to CorePointer
#Option "Device" "/dev/input/mice"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "false" # configurable at runtime? security risk
Option "LeftEdge" "1700" # x coord left
Option "RightEdge" "5300" # x coord right
Option "TopEdge" "1700" # y coord top
Option "BottomEdge" "4200" # y coord bottom
Option "FingerLow" "25" # pressure below this level triggers release
Option "FingerHigh" "30" # pressure above this level triggers touch
Option "MaxTapTime" "180" # max time in ms for detecting tap
Option "VertEdgeScroll" "true" # enable vertical scroll zone
Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
Option "CoastingSpeed" "0.30" # corner coasting speed
Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
Option "MinSpeed" "0.10" # speed factor for low pointer movement
Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 31.5 - 64.3
VertRefresh 50.0 - 60.0
Option "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
Option "NoLogo" "True"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "* Generic VESA compatible"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 24
#Option "LogoPath" "/etc/X11/tuxlogos.png"
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900" "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection

now I have this and it still doesn't work.
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
Option "OffTime" "1"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection

Is there an option to hide the tooltip after a certain time?

I've got the Spry tooltip set to appear after 500ms, but I'd like it to disappear within say 5s. It's only a "tip" so if the user's mouse stays hovered over the tip location they've read the tip and don't need to see it any more. I can't see an option to remove it after a time - if there isn't one it sure would be nice to have one.

Hi,
the only place, as I know, where you could get informations about these controls is here:
http://help.adobe.com/en_US/dreamweaver/cs/using/WSF77F4640-5703-4055-B177-133B8091FF1D.ht ml:
"Edit Tooltip widget options".
Hans-G.

How to change the scenegraph after a certain time

I want to have an object appear in one of my 3d-applets after 30 seconds. How do I do this? It would be easy in regular Java, but since the scenegraph is precompiled, it makes it more complicated in Java3D.
Have a look at some of my shapeshifters:
http://www.astralvisuals.com/ShapeShiftersnew.htm

Actually, it wouldn't be that difficult at all.
Here's the trick: The scene graph as a whole isn't necessarily precompiled. You actually compile the BranchGroups in the scene. And branch groups can be added or removed at ANY time (provided the right capabilities are set).
You can add it later in several ways:
You could override behavior to count out 30 seconds (w/ or w/o using an Alpha), and add the item.
Or you could do it from your application, using a TimerTask, or implementing your own thread to do it.
Another idea, instead of actually adding the item 30 seconds in:
You could add the item right away and set the appearance invisible, and set it visible when 30 seconds is up.
Another thing you could do is modify the culling at 30 seconds in, so the 'visible' faces aren't rendered until 30 seconds have passed.
The bottom line is, you can always change the scene graph after it's been compiled and is live AS LONG AS you have set the appropriate capabilitiy bits.

Removing extra text after a certain point for a field

Post Author: ralph.devlin
CA Forum: Formula
Hello,
What we want to do is remove extra text, IE (PO12345.195) We would want to remove the .195 from the end of that data so that the groupings will group them correctly. How can I accomplish this. The defaul trim commands seem to only elimnate white space, I want to elimnate text up to a certain point. thanks
Ralph

Post Author: Charliy
CA Forum: Formula
You want to do an INSTR to locate the period, then a LEFT to only show the data before it. Something like:
IF INSTR({table.field},".") > 0 THEN LEFT({table.field},(INSTR({table.field},".") )-1) ELSE {table.field}
I subtracted 1 because in your example above the period is in position 8 and you want the first 7 characters.

How to remove zip file after unzipping the file

I'm trying to delete zipfile in my program after unzipping the file. any suggestions? provide any sample code.
Thanks
kishore

File.delete()

Removing .bak files after a certain time

Similar Messages

Maybe you are looking for