Removing bing from safari 5 toolbar

What preference(s) file must I alter on my mac to remove Bing from the dropdown toolbar in Safari?
It is taking up space, and considering I'll never use Bing, I can prune it and shorten my list a little whenever needed.
Thanks.

The information that populates there is gathered from your history and bookmarks and cookies.
http://www.google.com/support/forum/p/Web+Search/thread?tid=5a69f1094357f31b&hl= en
As I mentioned before you can switch search engines from Safari / Preferences - General.
You might like using Glims for Safari | www.MacHangout.com
It's free and gives you more options for search engines and results. The latest buiilds are v10.7 Lion compatible / Safari v5.1 compatible.
After it's installed you can access the settings from Safari / Preferences - Glims

Similar Messages

  • How do I completely remove Bing from Safari

    I have tried to remove Bing from Safari by doing the following:
    1) Checked that default search enging is google
    2) Turned off extensions (and deleted install.mac extension)
    3) Searched fo Bing in finder without success
    All the discussion suggestions complete the steps above, but they have not worked for me. I'd really like to stick with Google and dont really want to try other search engines
    Kind regards

    Look to the right of Safari's address window.  You should have a search engine window.  Click on the SE icon inside the window & select Manage Search Engines.

  • How do I remove Bing from my toolbar at the top of the page. I have already tried both of the suggestions given in the help section; I could not find Bing in my control panel "add and remove programs," and there was one other suggestion which I also tried

    ''locking due the age of this thread - asked and answered''
    I have tried all of the suggestions given by FF in order to remove Bing from my computer but nothing seems to work. I would appreciate some advise. For instance when I go to add and remove programs I can't even find Bing listed. Looking forward to your suggestions. Thanks.
    == This happened ==
    Every time Firefox opened
    == I first installed Firefox

    Right click "Tools". Uncheck "Search Toolbars".

  • Remove bing from safari

    Please help me to remove Bing from the browser of Safari!
    Thanks

    Most complaints about Bing in Safari are due to the genieo / installmac adware trojan.
    safari defaults to using bing even though I have google as my setting in preferences.
    Adware Removal Guide : Genieo

  • I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    See below if the search engine setting was changed without your knowledge and you can't change it back.
    You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
    Step 1
    In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
    There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
    This step does not completely inactivate Genieo.
    Step 2
    Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Frameworks/GenieoExtra.framework
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.
    If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
    Move each of these items to the Trash in the same way:
    /Library/LaunchAgents/com.genieo.completer.update.plist
    /Library/LaunchAgents/com.genieo.engine.plist
    /Library/LaunchAgents/com.genieoinnovation.macextension.plist
    /Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
    /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
    /usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
    /usr/lib/libimckit.dylib
    /usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
    ~/Library/LaunchAgents/com.genieo.completer.update.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
    Step 3
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
    Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

  • I cannot remove Avast from Safari.  It is blocking a website that I need for remote access to my office.  I have dragged Avast to the trash and have restarted my computer.  It is no longer installed as an app on my Mac.  Does anyone know what to do?

    How do I remove Avast from Safari?

    "Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. Not only does it fail to protect you from any real danger, it throws false warnings, destabilizes and slows down the computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage.
    Back up all data, then remove "Avast" according to the developer's instructions. Restart.
    If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and then follow the instructions linked above.

  • Remove bing from Google Chrome

    I have been trying to remove bing from Google Chrome on my Macbook. Lots of other people have the same problem. I tried uninstalling Chrome, checking which was the search engine I had chosen - and these did not get rid of bing.
    I didn't find any of the answers worked, but I found a solution. Here it is:
    - Go to Chrome - Preferences
    - Select Manage Search Engines
    - Delete bing from the list.
    This worked for me! Free at last from the viscious clutches of the parasite Bing!

    This is a place nobody seems to notice. In Chome Settings - On Start Up
    If you have Chrome as your browser: (Other browsers may be similar)
    1. Open the "Customize and Control Google Chrome" tab at the far right of the address window (three little bars)
    2. Click on Settings
    3. Click:  On Start Up
    4. Click on: Open a specific page or set of pages. SET PAGES
    5. Remove Bing  - and add any page you want. Such as www.google.com

  • How to remove Bing from my computer

    Every time I use my search engine (which is set to Google as the default) it takes me to Bing.  How do I remove Bing?

    You may have installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
    Step 1
    In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that the Version is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
    There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
    This step does not completely inactivate Genieo.
    Step 2
    Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Frameworks/GenieoExtra.framework
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.
    If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
    Move each of these items to the Trash in the same way:
    /Library/LaunchAgents/com.genieo.completer.update.plist
    /Library/LaunchAgents/com.genieo.engine.plist
    /Library/LaunchAgents/com.genieoinnovation.macextension.plist
    /Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
    /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
    /usr/lib/libgenkit.dylib
    /usr/lib/libgenkitsa.dylib
    /usr/lib/libimckit.dylib
    /usr/lib/libimckitsa.dylib
    ~/Library/Application Support/com.genieoinnovation.Installer
    ~/Library/LaunchAgents/com.genieo.completer.download.plist
    ~/Library/LaunchAgents/com.genieo.completer.update.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
    Step 3
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
    Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to download a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

  • Clear Google search history from Safari Toolbar (v.4.0.3 and up)

    How to clear your search history. TEDIOUS but works.
    *Delete Google results pages from the history*
    In Safari 4.0.3 and up, you may now search your history. Search for the URL string www.google.com/search? and delete the records that match it.
    *Clear the search strings from the toolbar*
    Quit Safari then from the Terminal, run this command:
    defaults delete com.apple.safari RecentSearchStrings
    When you start Safari again, the search history should be empty.
    Somebody could probably build a shell script that searches the History.plist XML file and deletes the <dict> sections AND resets the Safari plist at the same time. I'm not that good with string manipulation, so I'm hoping somebody with experience could pick this up. Then that shell script could be made into an AppleScript or set up with Automator. Wishful thinking?

    How to clear your search history. TEDIOUS but works.
    *Delete Google results pages from the history*
    In Safari 4.0.3 and up, you may now search your history. Search for the URL string www.google.com/search? and delete the records that match it.
    *Clear the search strings from the toolbar*
    Quit Safari then from the Terminal, run this command:
    defaults delete com.apple.safari RecentSearchStrings
    When you start Safari again, the search history should be empty.
    Somebody could probably build a shell script that searches the History.plist XML file and deletes the <dict> sections AND resets the Safari plist at the same time. I'm not that good with string manipulation, so I'm hoping somebody with experience could pick this up. Then that shell script could be made into an AppleScript or set up with Automator. Wishful thinking?

  • Remove 'Buttons' from INFOVIEW toolbar

    How would I go about removing buttons from the Infoview Toolbar (Send, New etc...)
    Thanks

    Hello Daniel,
    some of these Buttons can be removed by permissions in the CMC. The others have to be removed by coding the InfoView .jsp Files.
    Check the following SAP Notes:
    1286494
    1286496
    1197103
    1283449
    Regards
    -Seb.

  • How may I remove globalconsumersurvey from Safari on an iMac please

    Please is there a way in which i may remove "globalconsumersurvey.com" from Safari on my iMac ?

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • I Have removed conduit from safari but it still has pop ups

    So i have remove the application conduit and geniome from finder, but pop up still occur. I even changed and remove conduit from search and extension. I still get pop ups.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Please tell me how to remove bing from thunderbird search

    I wish to get rid of bing from t'bird search, or get rid of bing altogether

    https://support.mozilla.org/en-US/kb/open-search?esab=a&s=search&r=0&as=s#w_how-to-change-the-default-search-engine

  • How can I remove Bing from the navagation toolbar?

    I have a Bing search box on the navigation toolbar and I want it removed. Please inform me as to the process to do the Bing removal.

    I searched frustrated for hours and this ACTUALLY does work!! It won't let me post a link here for some reason but there is a site called thesafemac(dot)com and the programmer there offers an adware program called the AdMedic. It's free to download, though a pop up box will ask you for a donation after install. You can click 'already donated' and it will go away or do what I did and donate a tiny amount once I saw the magic it worked (donation box never came back after that and the donation was through Paypal a few days back and no sign of weirdness there). Anyways, just open the AdMedic program once installed from Applications and run a scan. It finds that crappy crap in a flash and you can delete all at once. It restarts your computer and WHAM, you're back to normal. This REALLY fixed the annoying Bing problem on both my search engine and my tabs. It does reset it to the original Firefox browser which I then set to Google, but all my bookmarks were still in place. Well worth the tiny donation I gave him!! Hope this helps!!

  • Safari keeps losing my preferences and removing icons from my toolbar

    I am using Safari 7 on my 13in Aluminium MacBook (late 2008) running OS10.9. I add icons to the toolbar and add a homepage - but thesekeep disappearing

    Might be corrupted webpageicons and preferences ...
    For the webpageicons ...
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Safari/WebpageIcons.db
    Click Go then move the WebpageIcons.db file to the Trash.
    Now type or copy and paste the following:
    ~/Library/Preferences/com.apple.Safari.plist
    Click Go then move the com.apple.Safari.plist file to the Trash.
    Quit and relaunch Safari.

Maybe you are looking for

  • Keynote files revert back to 3.0.2.

    Every time I save my keynote files they revert back to iWork '06 version (3.0.2). I've already read "Topic : Keynote 3.03 and 4.01" and it does nothing, I've tried on different files, everything. When I try to associate the file with 4.0.2 it recogni

  • Problem with Inspector pull-down menus

    I have this weird problem with DVD Studio Pro all of a sudden. I'm wondering if a recent update might have broken something, and how I can fix it. The problem is that certain pull-down menus in the Inspector are not responding anymore. Important ones

  • Some fonts have disappeared..?

    I have been using CS4 Illustrator for a year now on my laptop.  Recently my laptop had to be taken to a repair shop.  All of my software was wiped whilst the laptop was being serviced.  Last week I reinstalled Adobe CS4 suite back onto my laptop, how

  • RPC Server is unavailable / account is not valid during setup

    Hey all, Working with a brand new environment. During install (both SQL 2012 and 2014) on any one of four servers, they all fail on the service accounts page with a "RPC server is unavailable" error and "The SQL Server service account login or passwo

  • Disable dbus services without native systemd service available

    Quite a few services are not activated manually, but through dbus. Say you wanted to disable some (enough valid reasons, using DE apps in WM environments, temporary until bug X is fixed, or a workaround for quirks like default file manager in Firefox