Removing Blank Space (line) Accompanying Layout Breaks

I've used a layout break to make a portion of text two-column after a one-column section. Whatever I do, whereever I put it, the layout break takes space. It's a farily tight document, in a 10pt. font, and the line the layout break takes screws up the layout of the whole page. How can I get it to not put a whole blank line between the one-column section and the two-column section?

I might not fully understand the problem but take the paragraph break off the end of the line on the first section:
vs

Similar Messages

Remove blank spaces in a text field?

How can I remove blank spaces in a text field? Some text fields have a lot of blank fields that need to be removed so that I can report only on the text.
CRXI
Edited by: Burton Roger on Feb 10, 2009 5:48 PM

Ex:
"Hi,
I have a need for monthly service desk reporting.
Please provide data on single sheet.
Thank you"
I would like to shrink it down to -
Hi, I have a need for monthly service desk reporting. Please provide data on single sheet. Thank you"

Removing Blank Spaces caused by Supressed data

Hi All,
How we can remove the balank spaces caused by supressed data in crystal reports.for eg
Item Code:I0002
               Timer
               For Time Info
               100
ItemCode:I00003
               Pen
               20
if there is txt added against pen as for Timer(For Time Info)
it will leave blank space.How to remove blank space.
Thanks,
Neetu

Hi Neetu
I have tried replicating your requirement at my end using Xtreme Sample database below are the steps which I have followed.
1)I have customer Id field,Customer name field field placed in details section.
2)Click on Section Expert
3)Click on Details.
4)Check the second option as "Suppress(No Drill Down)".In front of that there is one icon as "X-2".Double click on that icon.
5) Type the below formula
     if {Customer.Customer ID}=157 and {Customer.Customer Name} ="Aruba
     Sport" then true
    else if {Customer.Customer ID}=148 and {Customer.Customer Name}
     ="Koala Road Bikes" then true
     else false
6)Save and close.
With this formula where condition matches the specific criteria it will suppress the section and there will be no blank spaces.The rest of the data will be shown.
Hope it will help you.
Regards
Asha

PI removing blank spaces at the end of the lines in a plain text file

Hi -
I have an interface that transfers a file via FTP. I defined both the sender and receiver to transfer either Text or Binary but the interface removes every blank space I have after the last character. The file is a fixed lenght file.
Example:
Original file:
Hello world(space)(space)(space)(space)(space)(space)(space)(space)(eol)
where (space) is the space character and (eol) is the end of line char.
File after it is received.
Hello world(eol)
I already defined the parameter Row.fieldFixedLenghts with 10164 which is the lenght of the lines of the file.
Any ideas why it may be happening?
Thanks,
Carlos.

Hi -
I tried both the parameters:
xml.fieldContentFormatting
structure.fieldContentFormatting
The received file still has the problem. All the blank spaces are cleared out.
The file is a plain text file not an XML file. May this be the issue?
Thanks,
Carlos.

How can I remove space inserted by layout break?

Does anyone know how to get rid of the blank line added by inserting a layout break?
I have a word processing document that has a title, authors, affiliation etc centered as a single column at the top of the page followed by a layout break and the rest of the document text in two columns. The problem is that the layout break inserts a blank line so instead of a continuous single line spacing throughout the document its two parts are separated by blank line.

Hi MartinSmith,
Welcome to Pages '09 discussions.
I'm not quite sure what you're doing so here's what I did:
1. Created a new document
2. At the top I put Author below that Affiation then immediately did Insert > Layout Break
3. Made the remaining of the page two columns.
My document doesn't have the extra line feed you speak of. It most likely is I'm not following your lead. Please provide more information so we may better assist you.
These Discussions are enduser helping enduser, not Apple employees answering questions. Apple provides these discussion forums for endusers however, Apple neither monitors nor engages in discussions. Enduser such as yourself when they have extra time answer questions.
Again, welcome to Pages '09 Discussions, have fun here.
Cordially,
RicD

How to Remove Blank spaces in the text elements for a smartform

Hi All,
Can any one please help me out to remove the blank spaces in the text elements.
We are printing Labels using the Zebra Printer and we have rotated the windows to 90 degrees.
We are able to see out text and barcodes. But the issues is when we are printing the label. We are getting spaces in the Text and in the Text elements fields. I have tried to give &g_name(C)&. But it is not working even i worked with style sheet spaces no luck.
Currently out text and fields are printing like this
s h r i y a n
material number
1111 -001 -000
They should print like
shriyan
1111-001-000
According to the ZEBRA suggestions we are using the font helve.
Plase help us it is very urgent.
Reward point will be given.
Thanks

Hi,
Just use Condense g_name inside the program lines.
Just to see how it behaves put a hard breakpoint.
Break Username. and check the condense statement.
condense <your field> no-gaps.
Create program lines ahead of printing. give the field you want to condense in the input and output parameters of the program lines.
Use condense inside the program lines.
Thanks,
Vamshi.

How to remove blank space left from Images Word import

Hi all,
I'm working on a document which has been imported from Word, because of the conversion process a lot of images (that where pasted directly from Powerpoint in Word) didn't get converted properly and ended up in different part of the resulting Pages document.
The issue is that the images were found somewhere else, but the space they were occupying in the document was left ..sometimes in that space I find a squared frame which I can easily remove but some other times I just find a blank space which is impossible to remove or select.
This results in breaking the text for 10-13 lines. It is impossible to make the text filling this space. I can assure I cannot select this area with any tool (also by selecting 'make master objects selectable') and Im using the 'show invisibles' mode.
Please any suggestion or advise?
Im available to send a part of the document so anyone may check if wants to help me..
Thanks a lot
cheers

Hi Jerry thanks for your possible help , please find below a part of the text Im working, the issue is at the end of page 16 where I highlighted in yellow the text, I cannot get rid of the space at page 16:
Sorry if the document is in Italian and it is quite understanble for all you..
http://www.wupload.com/file/2677565317/example_of_my_problem.pages
I had to put it on wupload because the file is 77MB, sorry!!!
..and I dunno why...the whole document is 264 pages and is 77,8 MB I thought that only 17 pages were less...
I think thisis another BIG ISSUE thie FILE:.I think there is something hidden in it which is subtracting space...
Actually whne I imported the original document from Word it became 100MB, then I got rid of all the images but still 77MB, in word it was just 12MB with images..
Any more idea/suggestions about this size issue please?
Thanks a lot to everyone
cheers
simo
PS
in some of the footnotes there are some citation I imported using Endnote x5, but this is not affecting too much the size, as before these citations when I imported the document were not

SAP Script -Removing Blank Space

I am working on Customer Accounting Stmt.
On First Page I have to display header window , main window , account and footer window
Account window will be displayed on last page only.
Account window is phisically present after main window.
So blank space is getting created after main window.
My question is how to remove this blank space?
How to change the main window size dynamically?
Or any other solution to this problem?

Hi Vimal,
Check this link
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=windowonlastpagescript&adv=false&sortby=cm_rnd_rankvalue
Regards,
Sravanthi

Remove blank spaces in excel output file

it is a BOM report and the output is into a excel file.
problem with the excel file output is : i gives blank spaces sometimes after the number and sometimes before the number...
so, how can i remove those blank spaces for the values.
ive nearly 15 columns having values in each column.
so, how to get rid of blank spaces for these values in the columns in the xls file. is there any fn..module or a command that i can put in the code.

Hi,
above mentioned FM canbe used to eliminate extra zeros in char field. eg. material number.
MATNR will contain 18 char.-000000000045678925.
toget only 45678925 F.M -conversion exit can be used.
for ur reuirement use SHIFT statement only.
regards,
Prashanth Maturu.

How to remove blank spaces in the source code of my page?

I created a page with the following code for testing:
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/>
     <dsp:droplet name="ProductLookup">
          <dsp:param name="id" value="xprod2046" />
          <dsp:param name="elementName" value="product" />
          <dsp:oparam name="output">
               <dsp:valueof param="product.DisplayName"/>
          </dsp:oparam>
     </dsp:droplet>
</dsp:page>
It only shows the product name in the browser. But if I look at the source code of my page he created 61 lines in response to this code, where a line is the product name and the other 60 have nothing.
I know how to remove these lines that the ATG creates no content because my project is full of these empty lines.
Anyone ever had this problem and could help me?
Thanks

Hi ,
Yup this is a problem ,
you can use following ways :
1- use jsp comments eg :
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/><%--
     ----%><dsp:droplet name="ProductLookup"><%--
          ----%><dsp:param name="id" value="xprod2046" /><%--
          ----%><dsp:param name="elementName" value="product" /><%--
          ----%><dsp:oparam name="output"><%--
               ----%><dsp:valueof param="product.DisplayName"/><%--
          ----%></dsp:oparam><%--
     ----%></dsp:droplet><%--
----%></dsp:page>
2- End tags at next line :
e g :
* <dsp:page
* ><dsp:droplet name=”xyz”
* ><dsp:oparam name=”output”
* >Name: <dsp:valueof param=”abc”
* /></dsp:oparam
* ></dsp:droplet
* ></dsp:page>
3- Always use TAB instead of using SPACEBAR whie writing source code.
4 - From JSP 2.1 onwards we have a page directive trimwhitespaces ( see if that works , i was not able to ), google for it for more info
5 - You can modify your build scripts to remove white spaces from jsps while building EAR.(complex though, as you may not want to trim all white space.)
6 - modifying the deployment descriptor.
<init-param>
<param-name>trimSpaces</param-name>
<param-value>true</param-value>
</init-param>

Remove blank spaces

Dear Forum,
Field bkpf-xblnr is 16 char. I need to remove the space before and after in case user does not enter at the first position.
example, user enter the value bb1234567bbbbbbb during the entry screen in bkpf-xblnr where i will put 1234567 to another new variable in my program.
May I know what can i do?
Thanks

Dear,
we use a keyword in SAP ABAP called CONDENSE with an addition NO-GAPS to remove all blank spaces in a char type data object..
so for you..
condense bkpf-xblnr no-gaps
will work
more help at
http://help.sap.com/abapdocu_70/en/ABAPCONDENSE.htm

How can I remove blank space after month value while selecting to_char(sysdate)

select to_char(sysdate,'dd-month-yyyy') from dual;
when I give this query, I'm getting a blank space after the month value. How can I trim that?

Or else try this one
select to_char(sysdate,'dd-fmmonth-yyyy') from dual;
Best of luck.

Blank Space (Line) Everytime I delete a track in my Itunes Library

Hi Guys
Im currently having an annoying problem with Itunes. Its been happening for a while but it didnt bother me too much.
Everytime I delete a track from my library, it leaves a blank space where the track was and you cant navigate past it if skipping tracks by pressing left/right on the keyboard...all it does is return my library back to the top/bottom depending on which way you press to skip.
Ive seen that some other people have had this problem but no solution has been posted. Anyone got any ideas?
Any reply would be greatly appreciated. Thanks

The reason it does this? It's a bug in itunes 9. Folks never saw it in previous versions.
A solution will have to come from Apple programmers after they figure out how to fix it.
There are several previous threads about it. The more people who report it, the better chances of it getting fixed. Random bugs like this are the most difficult to fix. If anyone can get it to happen consistently, even better chances of it getting fixed.
I've reported it to apple, and so have a few other folks. The only way to counter it is, change views.

Remove Address Space in Crystal Layout

Hello Experts,
One of our customers are using Crsytal Report Layouts for Invoice. The layout currently grabs Address, Address2 fields from Logistics Tab of Invoice Document. Here in this case ShipTo and BillToAddress can contain a space in the lines.
Say
ShipToAdress:
580 Broadway Fl 8
New York NY 10012
USA
BillTo Address:
445 E 65th St
Apt 1A
New York NY 10065
USA
Since an empty space exsits in ShipToAddress , i need to remove that and it should like the following:
ShipToAdress:
580 Broadway Fl 8
New York NY 10012
USA
If there is no space between the lines ( like BillToAddress) then i need to print as it is.
I have used the following function and works fine when an empty line exists.
replace(replace(replace({OINV.Address2},chr(13)," ")," "," ")," "," ")
How ever when a line exists it does not prints the following way:
BillTo Address:
445 E 65th St Apt
1A New York NY 10065
USA
Can anyone help me how to achieve my requirement in Crystal Reports.

We have used something like the following to bring through the address from the BP. You do have to take into account the address type & Name for linking, and the name can be updated which will cause issues. The address can also be overwritten in the document so there is quite a bit of logic required to get it running
UpperCase ((if {CRD1.Street} = '' then '' else ({CRD1.Street} + Chr(10) + Chr(13))) +
(if{CRD1.Block} = '' then '' else ({CRD1.Block} & Chr(10) + Chr(13))) +
(if {CRD1.City} = '' then '' else ({CRD1.City})) +
(if isnull({CRD1.ZipCode}) then '' else (' ' + {CRD1.ZipCode}))+
(if {CRD1.Country} = 'NZ' then '' else ({CRD1.City})))
Hope it helps

Remove Blank Space from Crystal report

Hello,
i am new in crystal report work.
recently, i have created one crystal report which display item and remaining other detail like tax detail,item grand total, Some extra remark,etc.
But my scenario is that if i take three or more item then it take two page that's ok. on that case i have no problem,
but if i take only single item it will take two pages.
how can i remove unnecessary area.
i attached below image for better understanding.
i also provide crystal report if required.
if there is image not visible then i also attach below.
Plz... Help me ASAP.
Thanks,

It seems like your tax detail section is another sub report please compact the subreport if attached.
Right click on the object and select Format Object > checkbox "Supress Embedded Field Blank Lines"
Right Click on the section and click "Fit Section"

Removing Blank Space (line) Accompanying Layout Breaks

Similar Messages

Maybe you are looking for